From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-20.5 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,MENTIONS_GIT_HOSTING,NICE_REPLY_A,SPF_HELO_NONE,SPF_PASS, URIBL_BLOCKED,USER_AGENT_SANE_1 autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 323D0C433E0 for ; Tue, 9 Feb 2021 17:55:12 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id E677964EC4 for ; Tue, 9 Feb 2021 17:55:11 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233282AbhBIRuc (ORCPT ); Tue, 9 Feb 2021 12:50:32 -0500 Received: from lizzard.sbs.de ([194.138.37.39]:45162 "EHLO lizzard.sbs.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233385AbhBIRlN (ORCPT ); Tue, 9 Feb 2021 12:41:13 -0500 Received: from mail2.sbs.de (mail2.sbs.de [192.129.41.66]) by lizzard.sbs.de (8.15.2/8.15.2) with ESMTPS id 119HeCRm007476 (version=TLSv1.2 cipher=DHE-RSA-AES256-GCM-SHA384 bits=256 verify=OK); Tue, 9 Feb 2021 18:40:13 +0100 Received: from [167.87.249.204] ([167.87.249.204]) by mail2.sbs.de (8.15.2/8.15.2) with ESMTP id 119HeBth022727; Tue, 9 Feb 2021 18:40:12 +0100 Subject: Re: [PATCH] arm64: dts: ti: Add support for Siemens IOT2050 boards To: Nishanth Menon Cc: Tero Kristo , Rob Herring , linux-arm-kernel , devicetree , Linux Kernel Mailing List , Le Jin , Bao Cheng Su References: <367f1249-700e-38f2-36de-46fb0be61c5b@siemens.com> <20210209144427.np6kpecc2jbh2wa7@tingling> From: Jan Kiszka Message-ID: <5dc27777-eede-c4b4-8b21-1ac15a2e2617@siemens.com> Date: Tue, 9 Feb 2021 18:40:11 +0100 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Thunderbird/78.7.0 MIME-Version: 1.0 In-Reply-To: <20210209144427.np6kpecc2jbh2wa7@tingling> Content-Type: text/plain; charset=utf-8 Content-Language: en-US Content-Transfer-Encoding: 7bit Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 09.02.21 15:44, Nishanth Menon wrote: > Jan, > > A few quick scan comments below, you might need to post based off > 5.12-rc1 once available.. > > Also, I see a bit of warnings with dtbs_check, which probably needs a > little more digging into (pcie insists to get a device_type property, > etc..) > > you could use kernel_patch_verify or https://github.com/nmenon/kernel_patch_verify/blob/master/Dockerbuild.md > > it throws up a report like this https://pastebin.ubuntu.com/p/SdkZr432z3/ > Ok, will have a look - is that checkpatch on steroids? > So, many of my comments below are just first pass parse of that log -> I > usually do recommend building with W=2 and dtbs_check (with yamlint etc) > to make sure things are a bit sane. Will be good to have additional > eyes. > > On 11:21-20210209, Jan Kiszka wrote: >> From: Jan Kiszka >> >> Add support for two Siemens SIMATIC IOT2050 variants, Basic and >> Advanced. They are based on the TI AM6528 and AM6548 SOCs. >> >> Based on original version by Le Jin. > > Might be good to add links to the boards as well (if available), for > future reference. > Sure, though stability of links is not under my control. But I could additionally drop https://github.com/siemens/meta-iot2050 here. >> >> Signed-off-by: Jan Kiszka >> --- > > Will be nice to see at least a pastebin link for a bootlog on the boards > in the cover-letter / diffstat section with the v2 - for reference. > Sure. >> .../devicetree/bindings/arm/ti/k3.yaml | 2 + >> arch/arm64/boot/dts/ti/Makefile | 4 + >> .../boot/dts/ti/k3-am65-iot2050-common.dtsi | 649 ++++++++++++++++++ >> .../boot/dts/ti/k3-am6528-iot2050-basic.dts | 56 ++ >> .../dts/ti/k3-am6548-iot2050-advanced.dts | 57 ++ >> 5 files changed, 768 insertions(+) >> create mode 100644 arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi >> create mode 100644 arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts >> create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts >> >> diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml >> index c6e1c1e63e43..b1ab0cf4a2d6 100644 >> --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml >> +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml >> @@ -23,6 +23,8 @@ properties: >> items: >> - enum: >> - ti,am654-evm >> + - siemens,iot2050-basic >> + - siemens,iot2050-advanced > > - In a separate patch, ./Documentation/devicetree/bindings/vendor-prefixes.yaml -> Could you > make sure we add 'siemens' there? > - and, lets move the bindings to it's own patch, since that is how Rob > prefers to review in https://patchwork.ozlabs.org/project/devicetree-bindings/list/ > > Both of these patches will need Rob to ack. I think I should be able > to pick the first one up as well to reduce dependency, but we can > check with Rob in case there is a preference. > Ok. >> - const: ti,am654 >> >> - description: K3 J721E SoC >> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile >> index 65506f21ba30..928ea26ce250 100644 >> --- a/arch/arm64/boot/dts/ti/Makefile >> +++ b/arch/arm64/boot/dts/ti/Makefile >> @@ -8,6 +8,10 @@ >> >> dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb >> > > - drop the EOL to club am65 dtbs close to each other > >> +dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb >> + > > - Drop this EOL as well. Something like this: > > dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb > dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb > dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb > > dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb > >> +dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb >> + >> dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb >> >> dtb-$(CONFIG_ARCH_K3) += k3-j7200-common-proc-board.dtb >> diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi >> new file mode 100644 >> index 000000000000..de05937dbb60 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi >> @@ -0,0 +1,649 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Copyright (c) Siemens AG, 2018-2021 >> + * > > Optional: might be nice to add a oneliner comment for reuse scope.. > You mean something like "Common bits for IOT2050 basic and advanced boards"? >> + * Authors: >> + * Le Jin >> + * Jan Kiszka >> + */ >> + >> +/dts-v1/; >> + >> +#include "k3-am654.dtsi" >> +#include >> + >> +/ { >> + aliases { >> + spi0 = &mcu_spi0; >> + }; >> + >> + chosen { >> + stdout-path = "serial3:115200n8"; >> + bootargs = "earlycon=ns16550a,mmio32,0x02800000"; > > serial3 is main_uart1, did you mean 0x02810000 instead of 0x02800000 ? Indeed, this is 0x02810000 here. We overwrote this in our image - will fix this occurrence. > >> + }; >> + >> + reserved-memory { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges; >> + >> + secure_ddr: secure_ddr@9e800000 { > > "_" is not something we prefer for node names, so something like > secure_ddr: secure-ddr@... > Yeah, should be no problem to rename. >> + reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */ >> + alignment = <0x1000>; >> + no-map; >> + }; >> + >> + mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { >> + compatible = "shared-dma-pool"; >> + reg = <0 0xa0000000 0 0x100000>; >> + no-map; >> + }; >> + >> + mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { >> + compatible = "shared-dma-pool"; >> + reg = <0 0xa0100000 0 0xf00000>; >> + no-map; >> + }; >> + >> + mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { >> + compatible = "shared-dma-pool"; >> + reg = <0 0xa1000000 0 0x100000>; >> + no-map; >> + }; >> + >> + mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { >> + compatible = "shared-dma-pool"; >> + reg = <0 0xa1100000 0 0xf00000>; >> + no-map; >> + }; >> + >> + rtos_ipc_memory_region: ipc-memories@a2000000 { >> + reg = <0x00 0xa2000000 0x00 0x00200000>; >> + alignment = <0x1000>; >> + no-map; >> + }; >> + }; >> + >> + gpio_leds { > > just 'leds'? > >> + compatible = "gpio-leds"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&leds_pins_default>; >> + >> + status-led-red { >> + gpios = <&wkup_gpio0 32 GPIO_ACTIVE_HIGH>; >> + panic-indicator; >> + linux,default-trigger = "gpio"; >> + }; >> + >> + status-led-green { >> + gpios = <&wkup_gpio0 24 GPIO_ACTIVE_HIGH>; >> + linux,default-trigger = "gpio"; >> + }; >> + >> + user-led1-red { >> + gpios = <&pcal9535_3 14 GPIO_ACTIVE_HIGH>; >> + linux,default-trigger = "gpio"; >> + }; >> + >> + user-led1-green { >> + gpios = <&pcal9535_2 15 GPIO_ACTIVE_HIGH>; >> + linux,default-trigger = "gpio"; >> + }; >> + >> + user-led2-red { >> + gpios = <&wkup_gpio0 17 GPIO_ACTIVE_HIGH>; >> + linux,default-trigger = "gpio"; >> + }; >> + >> + user-led2-green { >> + gpios = <&wkup_gpio0 22 GPIO_ACTIVE_HIGH>; >> + linux,default-trigger = "gpio"; > > are you sure this is "gpio" ? dtbs_check reports should be one of: > ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern'] Good point, never checked. None of them has a default trigger, in fact. >> + }; >> + }; >> + >> + dp_refclk: clock { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <19200000>; >> + }; >> +}; >> + >> +&wkup_pmx0 { >> + wkup_i2c0_pins_default: wkup_i2c0_pins_default { > > Here, and else where: > wkup_i2c0_pins_default: wkup-i2c0-pins-default > > Prefer we dont use _ in node names (rest of the pinmux node names as > well). > >> + pinctrl-single,pins = < >> + AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */ >> + AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */ >> + >; >> + }; >> + >> + mcu_i2c0_pins_default: mcu_i2c0_pins_default { >> + pinctrl-single,pins = < >> + AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) I2C2_SDA */ > > [... similar issues with '_' elsewhere.. ] > >> + >; >> + }; >> +}; >> + >> +&main_pmx1 { >> + main_i2c0_pins_default: main-i2c0-pins-default { > > these look fine.. > >> + pinctrl-single,pins = < >> + AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */ >> + AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */ >> + >; >> + }; >> + >> + main_i2c1_pins_default: main-i2c1-pins-default { >> + pinctrl-single,pins = < >> + AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */ >> + AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */ >> + >; >> + }; >> + >> + ecap0_pins_default: ecap0-pins-default { >> + pinctrl-single,pins = < >> + AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */ >> + >; >> + }; >> +}; >> + >> +&wkup_uart0 { >> + /* Wakeup UART is used by System firmware */ >> + status = "disabled"; > In case of reservation for firmware usage: > status = "reserved"; > Ah, ok. > [...] > >> + >> +&wkup_gpio0 { >> + pinctrl-names = "default"; >> + pinctrl-0 = < >> + &arduino_io_d2_to_d3_pins_default >> + &arduino_i2c_aio_switch_pins_default >> + &arduino_io_oe_pins_default >> + &push_button_pins_default >> + &db9_com_mode_pins_default >> + >; >> + gpio-line-names = >> + "wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0", >> + "UART0-enable", "UART0-terminate", "", "WIFI-disable", >> + "", "", "", "", "", "", "", "", "", "", >> + "", "A4A5-I2C-mux", "", "", "", "USER-button", "", "", "","IO0", >> + "IO1", "IO2", "", "IO3", "IO17-direction", >> + "A5", "IO16-direction", "IO15-direction", >> + "IO14-direction", "A3", >> + "", "IO18-direction", "A4", "A2", "A1", >> + "A0", "", "", "IO13", "IO11", >> + "IO12", "IO10"; > > Any chance of intending this consistently? There is in fact a plan behind this way: I intended every 10 entries, to ease counting the pins (and that proved to be valuable more than once already). > >> +}; >> + >> +&wkup_i2c0 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&wkup_i2c0_pins_default>; >> + clock-frequency = <400000>; >> +}; >> + >> +&mcu_i2c0 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&mcu_i2c0_pins_default>; >> + clock-frequency = <400000>; >> + >> + psu: tps62363@60 { >> + compatible = "ti,tps62363"; >> + reg = <0x60>; >> + regulator-name = "tps62363-vout"; >> + regulator-min-microvolt = <500000>; >> + regulator-max-microvolt = <1500000>; >> + regulator-boot-on; >> + /* ti,vsel0-gpio = <&gpio1 16 0>; */ >> + /* ti,vsel1-gpio = <&gpio1 17 0>; */ > > Could you drop the commented out properties: above and later? > Sure, missed that. Will first check again where that came from. >> + ti,vsel0-state-high; >> + ti,vsel1-state-high; >> + /* ti,enable-pull-down; */ >> + /* ti,enable-force-pwm; */ >> + ti,enable-vout-discharge; >> + }; >> + >> + /*D4200*/ > Add a space prefix and postfix? (here and below) > /* D4200 */ > >> + pcal9535_1: gpio@20 { >> + compatible = "nxp,pcal9535"; >> + reg = <0x20>; >> + #gpio-cells = <2>; >> + gpio-controller; >> + gpio-line-names = >> + "A0-pull", "A1-pull", "A2-pull", "A3-pull", "A4-pull", >> + "A5-pull", "", "", >> + "IO14-enable", "IO15-enable", "IO16-enable", >> + "IO17-enable", "IO18-enable", "IO19-enable"; >> + }; >> + >> + /*D4201*/ >> + pcal9535_2: gpio@21 { >> + compatible = "nxp,pcal9535"; >> + reg = <0x21>; >> + #gpio-cells = <2>; >> + gpio-controller; >> + gpio-line-names = >> + "IO0-direction", "IO1-direction", "IO2-direction", >> + "IO3-direction", "IO4-direction", "IO5-direction", >> + "IO6-direction", "IO7-direction", >> + "IO8-direction", "IO9-direction", "IO10-direction", >> + "IO11-direction", "IO12-direction", "IO13-direction", >> + "IO19-direction"; >> + }; >> + > > [...] > >> + >> +&pcie1_rc { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&minipcie_pins_default>; >> + >> + num-lanes = <1>; >> + phys = <&serdes1 PHY_TYPE_PCIE 0>; >> + phy-names = "pcie-phy0"; >> + reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>; > > schema seems to want a device_type, and there seems to be some warnings > on serdes as well.. might be something to check up on.. > Will try to understand. Maybe something changed between the BSP kernel where we are coming from and the final upstream bindings, and I missed that. >> +}; >> + >> +&pcie1_ep { >> + status = "disabled"; >> +}; >> diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts >> new file mode 100644 >> index 000000000000..bb9ab4fdd74e >> --- /dev/null >> +++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts >> @@ -0,0 +1,56 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Copyright (c) Siemens AG, 2018-2021 >> + * > > Will be nice to explain the difference between basic and advanced dts. > > Are they two different boards? looks like the basic is using a part spin > with a single cluster, perhaps? I guess links might help.. The main difference was mentioned in the commit message: AM6528 vs. AM6548 (dual-core, single-cluster vs. quad-core, dual-cluster). The Advanced also has 16G eMMC, 2 GB RAM (instead of 1) and exploits some security features (which leads to different external UART connectivity). Will add that to the respective dts file headers. > >> + * Authors: >> + * Le Jin >> + * Jan Kiszka >> + */ >> + >> +/dts-v1/; >> + >> +#include "k3-am65-iot2050-common.dtsi" >> + >> +/ { >> + compatible = "siemens,iot2050-basic", "ti,am654"; >> + model = "SIMATIC IOT2050 Basic"; >> + >> + memory@80000000 { >> + device_type = "memory"; >> + /* 1G RAM */ >> + reg = <0x00000000 0x80000000 0x00000000 0x40000000>; >> + }; >> + >> + cpus { >> + cpu-map { >> + /delete-node/ cluster1; >> + }; >> + /delete-node/ cpu@100; >> + /delete-node/ cpu@101; >> + }; > > Personally, I'd prefer this (handling efuse spins in board files or > even overlays) instead of having to create 100s of dtsi per SoC for > every permutation & combination of TI efused devices and handle these > in board files. I do see examples of similar usage elsewhere in: > > $ git grep /delete-node/ arch/arm64/boot/dts/ > > But, if someone has a different opinion, feel free to pipe up with a > reasonable way to prevent file explosion. > >> +}; >> + >> +/* eMMC */ >> +&sdhci0 { >> + status = "disabled"; >> +}; >> + >> +&main_pmx0 { >> + main_uart0_pins_default: main_uart0_pins_default { >> + pinctrl-single,pins = < >> + AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */ >> + AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */ >> + AM65X_IOPAD(0x01ec, PIN_INPUT, 0) /* (AG11) UART0_CTSn */ >> + AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0) /* (AD11) UART0_RTSn */ >> + AM65X_IOPAD(0x0188, PIN_INPUT, 1) /* (D25) UART0_DCDn */ >> + AM65X_IOPAD(0x018c, PIN_INPUT, 1) /* (B26) UART0_DSRn */ >> + AM65X_IOPAD(0x0190, PIN_OUTPUT, 1) /* (A24) UART0_DTRn */ >> + AM65X_IOPAD(0x0194, PIN_INPUT, 1) /* (E24) UART0_RIN */ >> + >; >> + }; >> +}; >> + >> +&main_uart0 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&main_uart0_pins_default>; >> +}; >> diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts >> new file mode 100644 >> index 000000000000..aa1ef081ef22 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts >> @@ -0,0 +1,57 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Copyright (c) Siemens AG, 2018-2021 >> + * >> + * Authors: >> + * Le Jin >> + * Jan Kiszka >> + */ >> + >> +/dts-v1/; >> + >> +#include "k3-am65-iot2050-common.dtsi" > [...] > Thanks for the review! Will come up with v2 soon, once all the points are resolved. Jan -- Siemens AG, T RDA IOT Corporate Competence Center Embedded Linux