From: Amit Kucheria <amit.kucheria@linaro.org>
To: linux-kernel@vger.kernel.org
Cc: rnayak@codeaurora.org, linux-arm-msm@vger.kernel.org,
bjorn.andersson@linaro.org, edubezval@gmail.com,
smohanad@codeaurora.org, andy.gross@linaro.org,
dianders@chromium.org, mka@chromium.org,
David Brown <david.brown@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-soc@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH v3 16/16] arm64: dts: sdm845: enable tsens thermal zones
Date: Wed, 12 Sep 2018 15:23:01 +0530 [thread overview]
Message-ID: <5e2d5fc463a5f5623c4fc1b18ccdf62adc954758.1536744310.git.amit.kucheria@linaro.org> (raw)
In-Reply-To: <cover.1536744310.git.amit.kucheria@linaro.org>
In-Reply-To: <cover.1536744310.git.amit.kucheria@linaro.org>
One thermal zone per cpu is defined
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 170 +++++++++++++++++++++++++++
1 file changed, 170 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 0c9a2aa6a1b5..eb801922f6bb 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1104,4 +1104,174 @@
};
};
};
+
+ thermal-zones {
+ cpu0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit0: trip1 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ cpu_alert1: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit1: trip1 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 3>;
+
+ trips {
+ cpu_alert2: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit2: trip1 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu3-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 4>;
+
+ trips {
+ cpu_alert3: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit3: trip1 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu4-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cpu_alert4: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit4: trip1 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu5-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ cpu_alert5: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit5: trip1 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu6-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ cpu_alert6: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit6: trip1 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu7-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ cpu_alert7: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit7: trip1 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
};
--
2.17.1
next prev parent reply other threads:[~2018-09-12 9:55 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-12 9:52 [PATCH v3 00/16] Another round of tsens cleanups Amit Kucheria
2018-09-12 9:52 ` [PATCH v3 01/16] thermal: tsens: Prepare 8916 and 8974 tsens to use SROT and TM address space Amit Kucheria
2018-09-12 9:52 ` [PATCH v3 02/16] thermal: tsens: Add SPDX license identifiers Amit Kucheria
2018-09-12 9:52 ` [PATCH v3 03/16] thermal: tsens: Get rid of dead code Amit Kucheria
2018-09-12 9:52 ` [PATCH v3 04/16] thermal: tsens: Rename map field in order to add a second address map Amit Kucheria
2018-09-12 9:52 ` [PATCH v3 05/16] thermal: tsens: Add the SROT " Amit Kucheria
2018-09-12 9:52 ` [PATCH v3 06/16] MAINTAINERS: Add entry for Qualcomm TSENS thermal drivers Amit Kucheria
2018-09-12 9:52 ` [PATCH v3 07/16] thermal: tsens: Pass register offsets as private data Amit Kucheria
2018-09-18 19:34 ` Bjorn Andersson
[not found] ` <cover.1537547011.git.amit.kucheria@linaro.org>
2018-09-21 17:46 ` [PATCH v4 " Amit Kucheria
2018-09-21 17:25 ` Amit Kucheria
2018-09-12 9:52 ` [PATCH v3 08/16] thermal: tsens: Check if the IP is correctly enabled by firmware Amit Kucheria
2018-09-12 9:52 ` [PATCH v3 09/16] arm: dts: msm8974: thermal: split address space into two Amit Kucheria
2018-09-20 18:57 ` Andy Gross
2018-09-12 9:52 ` [PATCH v3 10/16] arm64: dts: msm8916: " Amit Kucheria
2018-09-20 18:57 ` Andy Gross
2018-09-12 9:52 ` [PATCH v3 11/16] arm: dts: msm8974: thermal: Add "qcom,sensors" property Amit Kucheria
2018-09-20 18:58 ` Andy Gross
2018-09-12 9:52 ` [PATCH v3 12/16] arm64: dts: msm8916: " Amit Kucheria
2018-09-20 18:58 ` Andy Gross
2018-09-12 9:52 ` [PATCH v3 13/16] dt-bindings: thermal: Fix a typo in documentation Amit Kucheria
2018-09-12 9:52 ` [PATCH v3 14/16] arm64: dts: msm8916: Add gpu thermal zone Amit Kucheria
2018-09-20 18:59 ` Andy Gross
2018-09-12 9:53 ` [PATCH v3 15/16] arm64: dts: msm8916: Add camera " Amit Kucheria
2018-09-20 19:00 ` Andy Gross
2018-09-12 9:53 ` Amit Kucheria [this message]
2018-09-20 19:01 ` [PATCH v3 16/16] arm64: dts: sdm845: enable tsens thermal zones Andy Gross
2018-10-25 19:25 ` Matthias Kaehlcke
2018-10-25 20:03 ` Amit Kucheria
2018-10-25 20:37 ` Matthias Kaehlcke
2018-09-18 15:01 ` [PATCH v3 00/16] Another round of tsens cleanups Amit Kucheria
2018-09-20 19:02 ` Andy Gross
2018-09-21 17:48 ` Amit Kucheria
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5e2d5fc463a5f5623c4fc1b18ccdf62adc954758.1536744310.git.amit.kucheria@linaro.org \
--to=amit.kucheria@linaro.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=edubezval@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mka@chromium.org \
--cc=rnayak@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=smohanad@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).