* mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
@ 2020-07-04 14:20 kernelci.org bot
0 siblings, 0 replies; 12+ messages in thread
From: kernelci.org bot @ 2020-07-04 14:20 UTC (permalink / raw)
To: Andre Przywara, gtucker, kernelci-results, Sudeep Holla
Cc: linux-arm-kernel, linux-kernel, Liviu Dudau, Lorenzo Pieralisi,
Rob Herring, devicetree
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This automated bisection report was sent to you on the basis *
* that you may be involved with the breaking commit it has *
* found. No manual investigation has been done to verify it, *
* and the root cause of the problem may be somewhere else. *
* *
* If you do send a fix, please include this trailer: *
* Reported-by: "kernelci.org bot" <bot@kernelci.org> *
* *
* Hope this helps! *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
Summary:
Start: 35e884f89df4 Merge tag 'for-linus-5.8b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Plain log: https://storage.kernelci.org/mainline/master/v5.8-rc3-156-g35e884f89df4/arm/vexpress_defconfig/gcc-8/lab-cip/baseline-vexpress-v2p-ca15-tc1.txt
HTML log: https://storage.kernelci.org/mainline/master/v5.8-rc3-156-g35e884f89df4/arm/vexpress_defconfig/gcc-8/lab-cip/baseline-vexpress-v2p-ca15-tc1.html
Result: 38ac46002d1d arm: dts: vexpress: Move mcc node back into motherboard node
Checks:
revert: PASS
verify: PASS
Parameters:
Tree: mainline
URL: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Branch: master
Target: qemu_arm-vexpress-a15
CPU arch: arm
Lab: lab-cip
Compiler: gcc-8
Config: vexpress_defconfig
Test case: baseline.dmesg.crit
Breaking commit found:
-------------------------------------------------------------------------------
commit 38ac46002d1df5707566a73486452851341028d2
Author: Andre Przywara <andre.przywara@arm.com>
Date: Wed Jun 3 17:22:37 2020 +0100
arm: dts: vexpress: Move mcc node back into motherboard node
Commit d9258898ad49 ("arm64: dts: arm: vexpress: Move fixed devices
out of bus node") moved the "mcc" DT node into the root node, because
it does not have any children using "reg" properties, so does violate
some dtc checks about "simple-bus" nodes.
However this broke the vexpress config-bus code, which walks up the
device tree to find the first node with an "arm,vexpress,site" property.
This gave the wrong result (matching the root node instead of the
motherboard node), so broke the clocks and some other devices for
VExpress boards.
Move the whole node back into its original position. This re-introduces
the dtc warning, but is conceptually the right thing to do. The dtc
warning seems to be overzealous here, there are discussions on fixing or
relaxing this check instead.
Link: https://lore.kernel.org/r/20200603162237.16319-1-andre.przywara@arm.com
Fixes: d9258898ad49 ("arm64: dts: vexpress: Move fixed devices out of bus node")
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index e6308fb76183..a88ee5294d35 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -100,79 +100,6 @@
};
};
- mcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
-
- oscclk0 {
- /* MCC static memory clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 0>;
- freq-range = <25000000 60000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk0";
- };
-
- v2m_oscclk1: oscclk1 {
- /* CLCD clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 1>;
- freq-range = <23750000 65000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk1";
- };
-
- v2m_oscclk2: oscclk2 {
- /* IO FPGA peripheral clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 2>;
- freq-range = <24000000 24000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk2";
- };
-
- volt-vio {
- /* Logic level voltage */
- compatible = "arm,vexpress-volt";
- arm,vexpress-sysreg,func = <2 0>;
- regulator-name = "VIO";
- regulator-always-on;
- label = "VIO";
- };
-
- temp-mcc {
- /* MCC internal operating temperature */
- compatible = "arm,vexpress-temp";
- arm,vexpress-sysreg,func = <4 0>;
- label = "MCC";
- };
-
- reset {
- compatible = "arm,vexpress-reset";
- arm,vexpress-sysreg,func = <5 0>;
- };
-
- muxfpga {
- compatible = "arm,vexpress-muxfpga";
- arm,vexpress-sysreg,func = <7 0>;
- };
-
- shutdown {
- compatible = "arm,vexpress-shutdown";
- arm,vexpress-sysreg,func = <8 0>;
- };
-
- reboot {
- compatible = "arm,vexpress-reboot";
- arm,vexpress-sysreg,func = <9 0>;
- };
-
- dvimode {
- compatible = "arm,vexpress-dvimode";
- arm,vexpress-sysreg,func = <11 0>;
- };
- };
-
bus@8000000 {
motherboard-bus {
model = "V2M-P1";
@@ -435,6 +362,79 @@
};
};
};
+
+ mcc {
+ compatible = "arm,vexpress,config-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ oscclk0 {
+ /* MCC static memory clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 0>;
+ freq-range = <25000000 60000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk0";
+ };
+
+ v2m_oscclk1: oscclk1 {
+ /* CLCD clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <23750000 65000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk1";
+ };
+
+ v2m_oscclk2: oscclk2 {
+ /* IO FPGA peripheral clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 2>;
+ freq-range = <24000000 24000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk2";
+ };
+
+ volt-vio {
+ /* Logic level voltage */
+ compatible = "arm,vexpress-volt";
+ arm,vexpress-sysreg,func = <2 0>;
+ regulator-name = "VIO";
+ regulator-always-on;
+ label = "VIO";
+ };
+
+ temp-mcc {
+ /* MCC internal operating temperature */
+ compatible = "arm,vexpress-temp";
+ arm,vexpress-sysreg,func = <4 0>;
+ label = "MCC";
+ };
+
+ reset {
+ compatible = "arm,vexpress-reset";
+ arm,vexpress-sysreg,func = <5 0>;
+ };
+
+ muxfpga {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
+
+ shutdown {
+ compatible = "arm,vexpress-shutdown";
+ arm,vexpress-sysreg,func = <8 0>;
+ };
+
+ reboot {
+ compatible = "arm,vexpress-reboot";
+ arm,vexpress-sysreg,func = <9 0>;
+ };
+
+ dvimode {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
+ };
};
};
};
-------------------------------------------------------------------------------
Git bisection log:
-------------------------------------------------------------------------------
git bisect start
# good: [719fdd32921fb7e3208db8832d32ae1c2d68900f] afs: Fix storage of cell names
git bisect good 719fdd32921fb7e3208db8832d32ae1c2d68900f
# bad: [35e884f89df4c48566d745dc5a97a0d058d04263] Merge tag 'for-linus-5.8b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
git bisect bad 35e884f89df4c48566d745dc5a97a0d058d04263
# bad: [615bc218d628d90a3afebcfa772aa41865acd301] Merge tag 'fixes-v5.8-rc3-a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
git bisect bad 615bc218d628d90a3afebcfa772aa41865acd301
# good: [668f532da4808688f5162cec6a38875390e1a91d] Merge tag 'timers-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good 668f532da4808688f5162cec6a38875390e1a91d
# good: [d528945d7762be94beca4c111bb95dcc9a9f39c0] Merge tag 'omap-for-v5.8/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/omap-fixes
git bisect good d528945d7762be94beca4c111bb95dcc9a9f39c0
# bad: [42d3f7e8da1bc55e3109f612c519c945f6587194] Merge tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
git bisect bad 42d3f7e8da1bc55e3109f612c519c945f6587194
# bad: [6d89c73ca5813768a2cc66f7420ac0cbddf4f37d] Merge tag 'arm-soc/for-5.8/soc-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
git bisect bad 6d89c73ca5813768a2cc66f7420ac0cbddf4f37d
# bad: [0f77ce26ebcf6ea384421d2dd47b924b83649692] Revert "ARM: sti: Implement dummy L2 cache's write_sec"
git bisect bad 0f77ce26ebcf6ea384421d2dd47b924b83649692
# bad: [d68ec1644dd546851d651787a638aead32a60a6f] Merge tag 'juno-fix-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
git bisect bad d68ec1644dd546851d651787a638aead32a60a6f
# bad: [38ac46002d1df5707566a73486452851341028d2] arm: dts: vexpress: Move mcc node back into motherboard node
git bisect bad 38ac46002d1df5707566a73486452851341028d2
# first bad commit: [38ac46002d1df5707566a73486452851341028d2] arm: dts: vexpress: Move mcc node back into motherboard node
-------------------------------------------------------------------------------
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
2020-07-03 10:49 ` André Przywara
@ 2020-07-16 9:37 ` Guillaume Tucker
0 siblings, 0 replies; 12+ messages in thread
From: Guillaume Tucker @ 2020-07-16 9:37 UTC (permalink / raw)
To: André Przywara
Cc: Sudeep Holla, kernelci-results, linux-kernel, devicetree,
linux-arm-kernel, Rob Herring, Liviu Dudau, Lorenzo Pieralisi
Hi André,
Sorry for the delay, I missed the thread on this issue.
On 03/07/2020 11:49, André Przywara wrote:
> On 03/07/2020 06:38, kernelci.org bot wrote:
>
> Hi Guillaume,
>
> is this report legit? The situation didn't change from Monday, I just
> repeated the test with mainline compared to my patch reverted.
>
> What is the actual failure here? You pointed to:
> <2>GIC CPU mask not found - kernel will fail to boot.
> but I don't see any explicit line stating that as the culprit anywhere
> in the logs. Actually the last line says:
> 00:24:07.022224 Job finished correctly
The failure is a "crit" kernel error message. The test job still
completes, but it has detected this new error and the bisection
reliably lands on the same commit mentioned below as the root
cause. As you found out, the commit is not to blame so this is a
false positive. However, it's a bit more complicated...
> And I see the GIC messages with and without this patch. As mentioned on
> Monday, "-smp 2" should be added to the QEMU command line to fix that.
All the test jobs involved in this bisection can be found here:
https://lava.ciplatform.org/scheduler/alljobs?length=25&search=lava-bisection-2224#table
The bisection first ran the "good" and "bad" revisions and didn't
detect the kernel error message with the "good" one. However,
taking a closer look at the logs, the error was actually there:
https://lava.ciplatform.org/scheduler/job/27647#L454
and then there were some kernel warnings:
https://lava.ciplatform.org/scheduler/job/27647#L561
which didn't occur with the "bad" revision:
https://lava.ciplatform.org/scheduler/job/27648
For some reason probably related to the kernel warnings, when
testing the "good" revision the GIC kernel errors got silenced
and dmesg didn't print them. This mislead the test into a false
positive.
Bisections are only run when a regression occurs, and it looks
like these GIC errors have been around for a long time. What I
believe happened is that the errors got hidden at some
point (allegedly due to the kernel warnings) and then came back
later. This was then wrongly detected as a regression.
So we have 2 problems to solve, the first one is to actually
remove these kernel errors and you've explained how to do that
with the QEMU command line. I've resubmitted the test job with
it and it worked indeed:
https://lava.collabora.co.uk/scheduler/job/2493885
and sent a fix for it:
https://github.com/kernelci/kernelci-core/pull/442
The other problem is about avoiding such cases from occurring
again in the future on kernelci.org, by making kernel error
detection more robust. But that's not a kernel problem.
Please bear with us, hopefully this false positive should not
come back. Thanks for your help with investigating the GIC
errors in the first place.
Guillaume
>> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>> * This automated bisection report was sent to you on the basis *
>> * that you may be involved with the breaking commit it has *
>> * found. No manual investigation has been done to verify it, *
>> * and the root cause of the problem may be somewhere else. *
>> * *
>> * If you do send a fix, please include this trailer: *
>> * Reported-by: "kernelci.org bot" <bot@kernelci.org> *
>> * *
>> * Hope this helps! *
>> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>>
>> mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
>>
>> Summary:
>> Start: 7cc2a8ea1048 Merge tag 'block-5.8-2020-07-01' of git://git.kernel.dk/linux-block
>> Plain log: https://storage.kernelci.org/mainline/master/v5.8-rc3-37-g7cc2a8ea1048/arm/vexpress_defconfig/gcc-8/lab-cip/baseline-vexpress-v2p-ca15-tc1.txt
>> HTML log: https://storage.kernelci.org/mainline/master/v5.8-rc3-37-g7cc2a8ea1048/arm/vexpress_defconfig/gcc-8/lab-cip/baseline-vexpress-v2p-ca15-tc1.html
>> Result: 38ac46002d1d arm: dts: vexpress: Move mcc node back into motherboard node
>>
>> Checks:
>> revert: PASS
>> verify: PASS
>
> What does that mean? That reverting the patch made the test pass?
> I did exactly that, and reverting made it worse, because poweroff
> doesn't work (among other things).
> So could this be a testing artifact? Because of the failing poweroff the
> test timed out or something?
>
> Many thanks,
> Andre
>
>>
>> Parameters:
>> Tree: mainline
>> URL: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
>> Branch: master
>> Target: qemu_arm-vexpress-a15
>> CPU arch: arm
>> Lab: lab-cip
>> Compiler: gcc-8
>> Config: vexpress_defconfig
>> Test case: baseline.dmesg.crit
>>
>> Breaking commit found:
>>
>> -------------------------------------------------------------------------------
>> commit 38ac46002d1df5707566a73486452851341028d2
>> Author: Andre Przywara <andre.przywara@arm.com>
>> Date: Wed Jun 3 17:22:37 2020 +0100
>>
>> arm: dts: vexpress: Move mcc node back into motherboard node
>>
>> Commit d9258898ad49 ("arm64: dts: arm: vexpress: Move fixed devices
>> out of bus node") moved the "mcc" DT node into the root node, because
>> it does not have any children using "reg" properties, so does violate
>> some dtc checks about "simple-bus" nodes.
>>
>> However this broke the vexpress config-bus code, which walks up the
>> device tree to find the first node with an "arm,vexpress,site" property.
>> This gave the wrong result (matching the root node instead of the
>> motherboard node), so broke the clocks and some other devices for
>> VExpress boards.
>>
>> Move the whole node back into its original position. This re-introduces
>> the dtc warning, but is conceptually the right thing to do. The dtc
>> warning seems to be overzealous here, there are discussions on fixing or
>> relaxing this check instead.
>>
>> Link: https://lore.kernel.org/r/20200603162237.16319-1-andre.przywara@arm.com
>> Fixes: d9258898ad49 ("arm64: dts: vexpress: Move fixed devices out of bus node")
>> Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
>> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
>> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
>>
>> diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
>> index e6308fb76183..a88ee5294d35 100644
>> --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
>> +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
>> @@ -100,79 +100,6 @@
>> };
>> };
>>
>> - mcc {
>> - compatible = "arm,vexpress,config-bus";
>> - arm,vexpress,config-bridge = <&v2m_sysreg>;
>> -
>> - oscclk0 {
>> - /* MCC static memory clock */
>> - compatible = "arm,vexpress-osc";
>> - arm,vexpress-sysreg,func = <1 0>;
>> - freq-range = <25000000 60000000>;
>> - #clock-cells = <0>;
>> - clock-output-names = "v2m:oscclk0";
>> - };
>> -
>> - v2m_oscclk1: oscclk1 {
>> - /* CLCD clock */
>> - compatible = "arm,vexpress-osc";
>> - arm,vexpress-sysreg,func = <1 1>;
>> - freq-range = <23750000 65000000>;
>> - #clock-cells = <0>;
>> - clock-output-names = "v2m:oscclk1";
>> - };
>> -
>> - v2m_oscclk2: oscclk2 {
>> - /* IO FPGA peripheral clock */
>> - compatible = "arm,vexpress-osc";
>> - arm,vexpress-sysreg,func = <1 2>;
>> - freq-range = <24000000 24000000>;
>> - #clock-cells = <0>;
>> - clock-output-names = "v2m:oscclk2";
>> - };
>> -
>> - volt-vio {
>> - /* Logic level voltage */
>> - compatible = "arm,vexpress-volt";
>> - arm,vexpress-sysreg,func = <2 0>;
>> - regulator-name = "VIO";
>> - regulator-always-on;
>> - label = "VIO";
>> - };
>> -
>> - temp-mcc {
>> - /* MCC internal operating temperature */
>> - compatible = "arm,vexpress-temp";
>> - arm,vexpress-sysreg,func = <4 0>;
>> - label = "MCC";
>> - };
>> -
>> - reset {
>> - compatible = "arm,vexpress-reset";
>> - arm,vexpress-sysreg,func = <5 0>;
>> - };
>> -
>> - muxfpga {
>> - compatible = "arm,vexpress-muxfpga";
>> - arm,vexpress-sysreg,func = <7 0>;
>> - };
>> -
>> - shutdown {
>> - compatible = "arm,vexpress-shutdown";
>> - arm,vexpress-sysreg,func = <8 0>;
>> - };
>> -
>> - reboot {
>> - compatible = "arm,vexpress-reboot";
>> - arm,vexpress-sysreg,func = <9 0>;
>> - };
>> -
>> - dvimode {
>> - compatible = "arm,vexpress-dvimode";
>> - arm,vexpress-sysreg,func = <11 0>;
>> - };
>> - };
>> -
>> bus@8000000 {
>> motherboard-bus {
>> model = "V2M-P1";
>> @@ -435,6 +362,79 @@
>> };
>> };
>> };
>> +
>> + mcc {
>> + compatible = "arm,vexpress,config-bus";
>> + arm,vexpress,config-bridge = <&v2m_sysreg>;
>> +
>> + oscclk0 {
>> + /* MCC static memory clock */
>> + compatible = "arm,vexpress-osc";
>> + arm,vexpress-sysreg,func = <1 0>;
>> + freq-range = <25000000 60000000>;
>> + #clock-cells = <0>;
>> + clock-output-names = "v2m:oscclk0";
>> + };
>> +
>> + v2m_oscclk1: oscclk1 {
>> + /* CLCD clock */
>> + compatible = "arm,vexpress-osc";
>> + arm,vexpress-sysreg,func = <1 1>;
>> + freq-range = <23750000 65000000>;
>> + #clock-cells = <0>;
>> + clock-output-names = "v2m:oscclk1";
>> + };
>> +
>> + v2m_oscclk2: oscclk2 {
>> + /* IO FPGA peripheral clock */
>> + compatible = "arm,vexpress-osc";
>> + arm,vexpress-sysreg,func = <1 2>;
>> + freq-range = <24000000 24000000>;
>> + #clock-cells = <0>;
>> + clock-output-names = "v2m:oscclk2";
>> + };
>> +
>> + volt-vio {
>> + /* Logic level voltage */
>> + compatible = "arm,vexpress-volt";
>> + arm,vexpress-sysreg,func = <2 0>;
>> + regulator-name = "VIO";
>> + regulator-always-on;
>> + label = "VIO";
>> + };
>> +
>> + temp-mcc {
>> + /* MCC internal operating temperature */
>> + compatible = "arm,vexpress-temp";
>> + arm,vexpress-sysreg,func = <4 0>;
>> + label = "MCC";
>> + };
>> +
>> + reset {
>> + compatible = "arm,vexpress-reset";
>> + arm,vexpress-sysreg,func = <5 0>;
>> + };
>> +
>> + muxfpga {
>> + compatible = "arm,vexpress-muxfpga";
>> + arm,vexpress-sysreg,func = <7 0>;
>> + };
>> +
>> + shutdown {
>> + compatible = "arm,vexpress-shutdown";
>> + arm,vexpress-sysreg,func = <8 0>;
>> + };
>> +
>> + reboot {
>> + compatible = "arm,vexpress-reboot";
>> + arm,vexpress-sysreg,func = <9 0>;
>> + };
>> +
>> + dvimode {
>> + compatible = "arm,vexpress-dvimode";
>> + arm,vexpress-sysreg,func = <11 0>;
>> + };
>> + };
>> };
>> };
>> };
>> -------------------------------------------------------------------------------
>>
>>
>> Git bisection log:
>>
>> -------------------------------------------------------------------------------
>> git bisect start
>> # good: [719fdd32921fb7e3208db8832d32ae1c2d68900f] afs: Fix storage of cell names
>> git bisect good 719fdd32921fb7e3208db8832d32ae1c2d68900f
>> # bad: [7cc2a8ea104820dd9e702202621e8fd4d9f6c8cf] Merge tag 'block-5.8-2020-07-01' of git://git.kernel.dk/linux-block
>> git bisect bad 7cc2a8ea104820dd9e702202621e8fd4d9f6c8cf
>> # bad: [e44b59cd758acdd413512d4597a1fabdadfe3abf] Merge tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
>> git bisect bad e44b59cd758acdd413512d4597a1fabdadfe3abf
>> # good: [91a9a90d040e8b9ff63d48ea71468e0f4db764ff] Merge tag 'sched_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
>> git bisect good 91a9a90d040e8b9ff63d48ea71468e0f4db764ff
>> # bad: [42d3f7e8da1bc55e3109f612c519c945f6587194] Merge tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
>> git bisect bad 42d3f7e8da1bc55e3109f612c519c945f6587194
>> # bad: [6d89c73ca5813768a2cc66f7420ac0cbddf4f37d] Merge tag 'arm-soc/for-5.8/soc-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
>> git bisect bad 6d89c73ca5813768a2cc66f7420ac0cbddf4f37d
>> # bad: [0f77ce26ebcf6ea384421d2dd47b924b83649692] Revert "ARM: sti: Implement dummy L2 cache's write_sec"
>> git bisect bad 0f77ce26ebcf6ea384421d2dd47b924b83649692
>> # bad: [d68ec1644dd546851d651787a638aead32a60a6f] Merge tag 'juno-fix-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
>> git bisect bad d68ec1644dd546851d651787a638aead32a60a6f
>> # bad: [38ac46002d1df5707566a73486452851341028d2] arm: dts: vexpress: Move mcc node back into motherboard node
>> git bisect bad 38ac46002d1df5707566a73486452851341028d2
>> # first bad commit: [38ac46002d1df5707566a73486452851341028d2] arm: dts: vexpress: Move mcc node back into motherboard node
>> -------------------------------------------------------------------------------
>>
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
2020-07-06 12:49 ` Sudeep Holla
@ 2020-07-16 8:57 ` Guillaume Tucker
0 siblings, 0 replies; 12+ messages in thread
From: Guillaume Tucker @ 2020-07-16 8:57 UTC (permalink / raw)
To: Sudeep Holla
Cc: kernelci-results, Andre Przywara, linux-arm-kernel, Rob Herring,
Lorenzo Pieralisi, devicetree, Liviu Dudau, linux-kernel
On 06/07/2020 13:49, Sudeep Holla wrote:
> Hi,
>
> On Sun, Jul 05, 2020 at 07:12:58PM -0700, kernelci.org bot wrote:
>> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>> * This automated bisection report was sent to you on the basis *
>> * that you may be involved with the breaking commit it has *
>> * found. No manual investigation has been done to verify it, *
>> * and the root cause of the problem may be somewhere else. *
>> * *
>> * If you do send a fix, please include this trailer: *
>> * Reported-by: "kernelci.org bot" <bot@kernelci.org> *
>> * *
>> * Hope this helps! *
>> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>>
>
> Andre test and replied to one of the similar but earlier reports.
> Unless we get some response to that, we can't proceed and we can't
> do much other than ignoring these reports. Please respond to Andre's
> queries.
Sorry I missed your email, the regression is still there. I'll
reply to André.
Guillaume
^ permalink raw reply [flat|nested] 12+ messages in thread
* mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
@ 2020-07-16 6:16 kernelci.org bot
0 siblings, 0 replies; 12+ messages in thread
From: kernelci.org bot @ 2020-07-16 6:16 UTC (permalink / raw)
To: Sudeep Holla, gtucker, kernelci-results, Andre Przywara
Cc: Lorenzo Pieralisi, devicetree, linux-arm-kernel, linux-kernel,
Liviu Dudau, Rob Herring
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This automated bisection report was sent to you on the basis *
* that you may be involved with the breaking commit it has *
* found. No manual investigation has been done to verify it, *
* and the root cause of the problem may be somewhere else. *
* *
* If you do send a fix, please include this trailer: *
* Reported-by: "kernelci.org bot" <bot@kernelci.org> *
* *
* Hope this helps! *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
Summary:
Start: 994e99a96c9b Merge tag 'platform-drivers-x86-v5.8-2' of git://git.infradead.org/linux-platform-drivers-x86 into master
Plain log: https://storage.kernelci.org/mainline/master/v5.8-rc5-44-g994e99a96c9b/arm/vexpress_defconfig/gcc-8/lab-cip/baseline-vexpress-v2p-ca15-tc1.txt
HTML log: https://storage.kernelci.org/mainline/master/v5.8-rc5-44-g994e99a96c9b/arm/vexpress_defconfig/gcc-8/lab-cip/baseline-vexpress-v2p-ca15-tc1.html
Result: 38ac46002d1d arm: dts: vexpress: Move mcc node back into motherboard node
Checks:
revert: PASS
verify: PASS
Parameters:
Tree: mainline
URL: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Branch: master
Target: qemu_arm-vexpress-a15
CPU arch: arm
Lab: lab-cip
Compiler: gcc-8
Config: vexpress_defconfig
Test case: baseline.dmesg.crit
Breaking commit found:
-------------------------------------------------------------------------------
commit 38ac46002d1df5707566a73486452851341028d2
Author: Andre Przywara <andre.przywara@arm.com>
Date: Wed Jun 3 17:22:37 2020 +0100
arm: dts: vexpress: Move mcc node back into motherboard node
Commit d9258898ad49 ("arm64: dts: arm: vexpress: Move fixed devices
out of bus node") moved the "mcc" DT node into the root node, because
it does not have any children using "reg" properties, so does violate
some dtc checks about "simple-bus" nodes.
However this broke the vexpress config-bus code, which walks up the
device tree to find the first node with an "arm,vexpress,site" property.
This gave the wrong result (matching the root node instead of the
motherboard node), so broke the clocks and some other devices for
VExpress boards.
Move the whole node back into its original position. This re-introduces
the dtc warning, but is conceptually the right thing to do. The dtc
warning seems to be overzealous here, there are discussions on fixing or
relaxing this check instead.
Link: https://lore.kernel.org/r/20200603162237.16319-1-andre.przywara@arm.com
Fixes: d9258898ad49 ("arm64: dts: vexpress: Move fixed devices out of bus node")
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index e6308fb76183..a88ee5294d35 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -100,79 +100,6 @@
};
};
- mcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
-
- oscclk0 {
- /* MCC static memory clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 0>;
- freq-range = <25000000 60000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk0";
- };
-
- v2m_oscclk1: oscclk1 {
- /* CLCD clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 1>;
- freq-range = <23750000 65000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk1";
- };
-
- v2m_oscclk2: oscclk2 {
- /* IO FPGA peripheral clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 2>;
- freq-range = <24000000 24000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk2";
- };
-
- volt-vio {
- /* Logic level voltage */
- compatible = "arm,vexpress-volt";
- arm,vexpress-sysreg,func = <2 0>;
- regulator-name = "VIO";
- regulator-always-on;
- label = "VIO";
- };
-
- temp-mcc {
- /* MCC internal operating temperature */
- compatible = "arm,vexpress-temp";
- arm,vexpress-sysreg,func = <4 0>;
- label = "MCC";
- };
-
- reset {
- compatible = "arm,vexpress-reset";
- arm,vexpress-sysreg,func = <5 0>;
- };
-
- muxfpga {
- compatible = "arm,vexpress-muxfpga";
- arm,vexpress-sysreg,func = <7 0>;
- };
-
- shutdown {
- compatible = "arm,vexpress-shutdown";
- arm,vexpress-sysreg,func = <8 0>;
- };
-
- reboot {
- compatible = "arm,vexpress-reboot";
- arm,vexpress-sysreg,func = <9 0>;
- };
-
- dvimode {
- compatible = "arm,vexpress-dvimode";
- arm,vexpress-sysreg,func = <11 0>;
- };
- };
-
bus@8000000 {
motherboard-bus {
model = "V2M-P1";
@@ -435,6 +362,79 @@
};
};
};
+
+ mcc {
+ compatible = "arm,vexpress,config-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ oscclk0 {
+ /* MCC static memory clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 0>;
+ freq-range = <25000000 60000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk0";
+ };
+
+ v2m_oscclk1: oscclk1 {
+ /* CLCD clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <23750000 65000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk1";
+ };
+
+ v2m_oscclk2: oscclk2 {
+ /* IO FPGA peripheral clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 2>;
+ freq-range = <24000000 24000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk2";
+ };
+
+ volt-vio {
+ /* Logic level voltage */
+ compatible = "arm,vexpress-volt";
+ arm,vexpress-sysreg,func = <2 0>;
+ regulator-name = "VIO";
+ regulator-always-on;
+ label = "VIO";
+ };
+
+ temp-mcc {
+ /* MCC internal operating temperature */
+ compatible = "arm,vexpress-temp";
+ arm,vexpress-sysreg,func = <4 0>;
+ label = "MCC";
+ };
+
+ reset {
+ compatible = "arm,vexpress-reset";
+ arm,vexpress-sysreg,func = <5 0>;
+ };
+
+ muxfpga {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
+
+ shutdown {
+ compatible = "arm,vexpress-shutdown";
+ arm,vexpress-sysreg,func = <8 0>;
+ };
+
+ reboot {
+ compatible = "arm,vexpress-reboot";
+ arm,vexpress-sysreg,func = <9 0>;
+ };
+
+ dvimode {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
+ };
};
};
};
-------------------------------------------------------------------------------
Git bisection log:
-------------------------------------------------------------------------------
git bisect start
# good: [719fdd32921fb7e3208db8832d32ae1c2d68900f] afs: Fix storage of cell names
git bisect good 719fdd32921fb7e3208db8832d32ae1c2d68900f
# bad: [994e99a96c9b502b3f6ee411457007cd52051cf5] Merge tag 'platform-drivers-x86-v5.8-2' of git://git.infradead.org/linux-platform-drivers-x86 into master
git bisect bad 994e99a96c9b502b3f6ee411457007cd52051cf5
# bad: [dcde237b9b0eb1d19306e6f48c0a4e058907619f] Merge tag 'perf-tools-fixes-2020-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
git bisect bad dcde237b9b0eb1d19306e6f48c0a4e058907619f
# bad: [442ad2254ac56b39870c0cfed96d500921fea5d5] perf record: Fix duplicated sideband events with Intel PT system wide tracing
git bisect bad 442ad2254ac56b39870c0cfed96d500921fea5d5
# bad: [f7db192b2d71ea42627a32349d59a5f99f2aafcc] Merge tag 'arm-omap-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
git bisect bad f7db192b2d71ea42627a32349d59a5f99f2aafcc
# good: [ae71d4bf0074a81cc04255c96e3de0a49b1d95fa] Merge tag 'perf-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good ae71d4bf0074a81cc04255c96e3de0a49b1d95fa
# good: [d528945d7762be94beca4c111bb95dcc9a9f39c0] Merge tag 'omap-for-v5.8/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/omap-fixes
git bisect good d528945d7762be94beca4c111bb95dcc9a9f39c0
# bad: [2596ce4b4ded685b67fed407aed2bfe6ebcc39cb] Merge tag 'arm-soc/for-5.8/drivers-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
git bisect bad 2596ce4b4ded685b67fed407aed2bfe6ebcc39cb
# bad: [0f77ce26ebcf6ea384421d2dd47b924b83649692] Revert "ARM: sti: Implement dummy L2 cache's write_sec"
git bisect bad 0f77ce26ebcf6ea384421d2dd47b924b83649692
# bad: [d68ec1644dd546851d651787a638aead32a60a6f] Merge tag 'juno-fix-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
git bisect bad d68ec1644dd546851d651787a638aead32a60a6f
# bad: [38ac46002d1df5707566a73486452851341028d2] arm: dts: vexpress: Move mcc node back into motherboard node
git bisect bad 38ac46002d1df5707566a73486452851341028d2
# first bad commit: [38ac46002d1df5707566a73486452851341028d2] arm: dts: vexpress: Move mcc node back into motherboard node
-------------------------------------------------------------------------------
^ permalink raw reply related [flat|nested] 12+ messages in thread
* mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
@ 2020-07-15 9:35 kernelci.org bot
0 siblings, 0 replies; 12+ messages in thread
From: kernelci.org bot @ 2020-07-15 9:35 UTC (permalink / raw)
To: Andre Przywara, Sudeep Holla, kernelci-results, gtucker
Cc: Liviu Dudau, linux-arm-kernel, devicetree, linux-kernel,
Rob Herring, Lorenzo Pieralisi
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This automated bisection report was sent to you on the basis *
* that you may be involved with the breaking commit it has *
* found. No manual investigation has been done to verify it, *
* and the root cause of the problem may be somewhere else. *
* *
* If you do send a fix, please include this trailer: *
* Reported-by: "kernelci.org bot" <bot@kernelci.org> *
* *
* Hope this helps! *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
Summary:
Start: e9919e11e219 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Plain log: https://storage.kernelci.org/mainline/master/v5.8-rc5-16-ge9919e11e219/arm/vexpress_defconfig/gcc-8/lab-collabora/baseline-vexpress-v2p-ca15-tc1.txt
HTML log: https://storage.kernelci.org/mainline/master/v5.8-rc5-16-ge9919e11e219/arm/vexpress_defconfig/gcc-8/lab-collabora/baseline-vexpress-v2p-ca15-tc1.html
Result: 38ac46002d1d arm: dts: vexpress: Move mcc node back into motherboard node
Checks:
revert: PASS
verify: PASS
Parameters:
Tree: mainline
URL: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Branch: master
Target: qemu_arm-vexpress-a15
CPU arch: arm
Lab: lab-collabora
Compiler: gcc-8
Config: vexpress_defconfig
Test case: baseline.dmesg.crit
Breaking commit found:
-------------------------------------------------------------------------------
commit 38ac46002d1df5707566a73486452851341028d2
Author: Andre Przywara <andre.przywara@arm.com>
Date: Wed Jun 3 17:22:37 2020 +0100
arm: dts: vexpress: Move mcc node back into motherboard node
Commit d9258898ad49 ("arm64: dts: arm: vexpress: Move fixed devices
out of bus node") moved the "mcc" DT node into the root node, because
it does not have any children using "reg" properties, so does violate
some dtc checks about "simple-bus" nodes.
However this broke the vexpress config-bus code, which walks up the
device tree to find the first node with an "arm,vexpress,site" property.
This gave the wrong result (matching the root node instead of the
motherboard node), so broke the clocks and some other devices for
VExpress boards.
Move the whole node back into its original position. This re-introduces
the dtc warning, but is conceptually the right thing to do. The dtc
warning seems to be overzealous here, there are discussions on fixing or
relaxing this check instead.
Link: https://lore.kernel.org/r/20200603162237.16319-1-andre.przywara@arm.com
Fixes: d9258898ad49 ("arm64: dts: vexpress: Move fixed devices out of bus node")
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index e6308fb76183..a88ee5294d35 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -100,79 +100,6 @@
};
};
- mcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
-
- oscclk0 {
- /* MCC static memory clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 0>;
- freq-range = <25000000 60000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk0";
- };
-
- v2m_oscclk1: oscclk1 {
- /* CLCD clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 1>;
- freq-range = <23750000 65000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk1";
- };
-
- v2m_oscclk2: oscclk2 {
- /* IO FPGA peripheral clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 2>;
- freq-range = <24000000 24000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk2";
- };
-
- volt-vio {
- /* Logic level voltage */
- compatible = "arm,vexpress-volt";
- arm,vexpress-sysreg,func = <2 0>;
- regulator-name = "VIO";
- regulator-always-on;
- label = "VIO";
- };
-
- temp-mcc {
- /* MCC internal operating temperature */
- compatible = "arm,vexpress-temp";
- arm,vexpress-sysreg,func = <4 0>;
- label = "MCC";
- };
-
- reset {
- compatible = "arm,vexpress-reset";
- arm,vexpress-sysreg,func = <5 0>;
- };
-
- muxfpga {
- compatible = "arm,vexpress-muxfpga";
- arm,vexpress-sysreg,func = <7 0>;
- };
-
- shutdown {
- compatible = "arm,vexpress-shutdown";
- arm,vexpress-sysreg,func = <8 0>;
- };
-
- reboot {
- compatible = "arm,vexpress-reboot";
- arm,vexpress-sysreg,func = <9 0>;
- };
-
- dvimode {
- compatible = "arm,vexpress-dvimode";
- arm,vexpress-sysreg,func = <11 0>;
- };
- };
-
bus@8000000 {
motherboard-bus {
model = "V2M-P1";
@@ -435,6 +362,79 @@
};
};
};
+
+ mcc {
+ compatible = "arm,vexpress,config-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ oscclk0 {
+ /* MCC static memory clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 0>;
+ freq-range = <25000000 60000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk0";
+ };
+
+ v2m_oscclk1: oscclk1 {
+ /* CLCD clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <23750000 65000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk1";
+ };
+
+ v2m_oscclk2: oscclk2 {
+ /* IO FPGA peripheral clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 2>;
+ freq-range = <24000000 24000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk2";
+ };
+
+ volt-vio {
+ /* Logic level voltage */
+ compatible = "arm,vexpress-volt";
+ arm,vexpress-sysreg,func = <2 0>;
+ regulator-name = "VIO";
+ regulator-always-on;
+ label = "VIO";
+ };
+
+ temp-mcc {
+ /* MCC internal operating temperature */
+ compatible = "arm,vexpress-temp";
+ arm,vexpress-sysreg,func = <4 0>;
+ label = "MCC";
+ };
+
+ reset {
+ compatible = "arm,vexpress-reset";
+ arm,vexpress-sysreg,func = <5 0>;
+ };
+
+ muxfpga {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
+
+ shutdown {
+ compatible = "arm,vexpress-shutdown";
+ arm,vexpress-sysreg,func = <8 0>;
+ };
+
+ reboot {
+ compatible = "arm,vexpress-reboot";
+ arm,vexpress-sysreg,func = <9 0>;
+ };
+
+ dvimode {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
+ };
};
};
};
-------------------------------------------------------------------------------
Git bisection log:
-------------------------------------------------------------------------------
git bisect start
# good: [719fdd32921fb7e3208db8832d32ae1c2d68900f] afs: Fix storage of cell names
git bisect good 719fdd32921fb7e3208db8832d32ae1c2d68900f
# bad: [e9919e11e219eaa5e8041b7b1a196839143e9125] Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
git bisect bad e9919e11e219eaa5e8041b7b1a196839143e9125
# bad: [6d12075ddeedc38d25c5b74e929e686158da728c] Merge tag 'mtd/fixes-for-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
git bisect bad 6d12075ddeedc38d25c5b74e929e686158da728c
# bad: [684c8ccc40d7e5408d597a43712bad3827d3fb94] Merge tag 'devicetree-fixes-for-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
git bisect bad 684c8ccc40d7e5408d597a43712bad3827d3fb94
# bad: [e44b59cd758acdd413512d4597a1fabdadfe3abf] Merge tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
git bisect bad e44b59cd758acdd413512d4597a1fabdadfe3abf
# good: [91a9a90d040e8b9ff63d48ea71468e0f4db764ff] Merge tag 'sched_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good 91a9a90d040e8b9ff63d48ea71468e0f4db764ff
# bad: [42d3f7e8da1bc55e3109f612c519c945f6587194] Merge tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
git bisect bad 42d3f7e8da1bc55e3109f612c519c945f6587194
# bad: [6d89c73ca5813768a2cc66f7420ac0cbddf4f37d] Merge tag 'arm-soc/for-5.8/soc-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
git bisect bad 6d89c73ca5813768a2cc66f7420ac0cbddf4f37d
# bad: [0f77ce26ebcf6ea384421d2dd47b924b83649692] Revert "ARM: sti: Implement dummy L2 cache's write_sec"
git bisect bad 0f77ce26ebcf6ea384421d2dd47b924b83649692
# bad: [d68ec1644dd546851d651787a638aead32a60a6f] Merge tag 'juno-fix-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
git bisect bad d68ec1644dd546851d651787a638aead32a60a6f
# bad: [38ac46002d1df5707566a73486452851341028d2] arm: dts: vexpress: Move mcc node back into motherboard node
git bisect bad 38ac46002d1df5707566a73486452851341028d2
# first bad commit: [38ac46002d1df5707566a73486452851341028d2] arm: dts: vexpress: Move mcc node back into motherboard node
-------------------------------------------------------------------------------
^ permalink raw reply related [flat|nested] 12+ messages in thread
* mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
@ 2020-07-14 11:23 kernelci.org bot
0 siblings, 0 replies; 12+ messages in thread
From: kernelci.org bot @ 2020-07-14 11:23 UTC (permalink / raw)
To: kernelci-results, Sudeep Holla, gtucker, Andre Przywara
Cc: Lorenzo Pieralisi, linux-arm-kernel, devicetree, Liviu Dudau,
Rob Herring, linux-kernel
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This automated bisection report was sent to you on the basis *
* that you may be involved with the breaking commit it has *
* found. No manual investigation has been done to verify it, *
* and the root cause of the problem may be somewhere else. *
* *
* If you do send a fix, please include this trailer: *
* Reported-by: "kernelci.org bot" <bot@kernelci.org> *
* *
* Hope this helps! *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
Summary:
Start: 0dc589da873b Merge tag 'iommu-fixes-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Plain log: https://storage.kernelci.org/mainline/master/v5.8-rc5-8-g0dc589da873b/arm/vexpress_defconfig/gcc-8/lab-cip/baseline-vexpress-v2p-ca15-tc1.txt
HTML log: https://storage.kernelci.org/mainline/master/v5.8-rc5-8-g0dc589da873b/arm/vexpress_defconfig/gcc-8/lab-cip/baseline-vexpress-v2p-ca15-tc1.html
Result: 38ac46002d1d arm: dts: vexpress: Move mcc node back into motherboard node
Checks:
revert: PASS
verify: PASS
Parameters:
Tree: mainline
URL: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Branch: master
Target: qemu_arm-vexpress-a15
CPU arch: arm
Lab: lab-cip
Compiler: gcc-8
Config: vexpress_defconfig
Test case: baseline.dmesg.crit
Breaking commit found:
-------------------------------------------------------------------------------
commit 38ac46002d1df5707566a73486452851341028d2
Author: Andre Przywara <andre.przywara@arm.com>
Date: Wed Jun 3 17:22:37 2020 +0100
arm: dts: vexpress: Move mcc node back into motherboard node
Commit d9258898ad49 ("arm64: dts: arm: vexpress: Move fixed devices
out of bus node") moved the "mcc" DT node into the root node, because
it does not have any children using "reg" properties, so does violate
some dtc checks about "simple-bus" nodes.
However this broke the vexpress config-bus code, which walks up the
device tree to find the first node with an "arm,vexpress,site" property.
This gave the wrong result (matching the root node instead of the
motherboard node), so broke the clocks and some other devices for
VExpress boards.
Move the whole node back into its original position. This re-introduces
the dtc warning, but is conceptually the right thing to do. The dtc
warning seems to be overzealous here, there are discussions on fixing or
relaxing this check instead.
Link: https://lore.kernel.org/r/20200603162237.16319-1-andre.przywara@arm.com
Fixes: d9258898ad49 ("arm64: dts: vexpress: Move fixed devices out of bus node")
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index e6308fb76183..a88ee5294d35 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -100,79 +100,6 @@
};
};
- mcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
-
- oscclk0 {
- /* MCC static memory clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 0>;
- freq-range = <25000000 60000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk0";
- };
-
- v2m_oscclk1: oscclk1 {
- /* CLCD clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 1>;
- freq-range = <23750000 65000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk1";
- };
-
- v2m_oscclk2: oscclk2 {
- /* IO FPGA peripheral clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 2>;
- freq-range = <24000000 24000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk2";
- };
-
- volt-vio {
- /* Logic level voltage */
- compatible = "arm,vexpress-volt";
- arm,vexpress-sysreg,func = <2 0>;
- regulator-name = "VIO";
- regulator-always-on;
- label = "VIO";
- };
-
- temp-mcc {
- /* MCC internal operating temperature */
- compatible = "arm,vexpress-temp";
- arm,vexpress-sysreg,func = <4 0>;
- label = "MCC";
- };
-
- reset {
- compatible = "arm,vexpress-reset";
- arm,vexpress-sysreg,func = <5 0>;
- };
-
- muxfpga {
- compatible = "arm,vexpress-muxfpga";
- arm,vexpress-sysreg,func = <7 0>;
- };
-
- shutdown {
- compatible = "arm,vexpress-shutdown";
- arm,vexpress-sysreg,func = <8 0>;
- };
-
- reboot {
- compatible = "arm,vexpress-reboot";
- arm,vexpress-sysreg,func = <9 0>;
- };
-
- dvimode {
- compatible = "arm,vexpress-dvimode";
- arm,vexpress-sysreg,func = <11 0>;
- };
- };
-
bus@8000000 {
motherboard-bus {
model = "V2M-P1";
@@ -435,6 +362,79 @@
};
};
};
+
+ mcc {
+ compatible = "arm,vexpress,config-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ oscclk0 {
+ /* MCC static memory clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 0>;
+ freq-range = <25000000 60000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk0";
+ };
+
+ v2m_oscclk1: oscclk1 {
+ /* CLCD clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <23750000 65000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk1";
+ };
+
+ v2m_oscclk2: oscclk2 {
+ /* IO FPGA peripheral clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 2>;
+ freq-range = <24000000 24000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk2";
+ };
+
+ volt-vio {
+ /* Logic level voltage */
+ compatible = "arm,vexpress-volt";
+ arm,vexpress-sysreg,func = <2 0>;
+ regulator-name = "VIO";
+ regulator-always-on;
+ label = "VIO";
+ };
+
+ temp-mcc {
+ /* MCC internal operating temperature */
+ compatible = "arm,vexpress-temp";
+ arm,vexpress-sysreg,func = <4 0>;
+ label = "MCC";
+ };
+
+ reset {
+ compatible = "arm,vexpress-reset";
+ arm,vexpress-sysreg,func = <5 0>;
+ };
+
+ muxfpga {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
+
+ shutdown {
+ compatible = "arm,vexpress-shutdown";
+ arm,vexpress-sysreg,func = <8 0>;
+ };
+
+ reboot {
+ compatible = "arm,vexpress-reboot";
+ arm,vexpress-sysreg,func = <9 0>;
+ };
+
+ dvimode {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
+ };
};
};
};
-------------------------------------------------------------------------------
Git bisection log:
-------------------------------------------------------------------------------
git bisect start
# good: [719fdd32921fb7e3208db8832d32ae1c2d68900f] afs: Fix storage of cell names
git bisect good 719fdd32921fb7e3208db8832d32ae1c2d68900f
# bad: [0dc589da873b58b70f4caf4b070fb0cf70fdd1dc] Merge tag 'iommu-fixes-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
git bisect bad 0dc589da873b58b70f4caf4b070fb0cf70fdd1dc
# bad: [aa27b32b76d0b1b242d43977da0e5358da1c825f] Merge tag 'for-5.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
git bisect bad aa27b32b76d0b1b242d43977da0e5358da1c825f
# bad: [684c8ccc40d7e5408d597a43712bad3827d3fb94] Merge tag 'devicetree-fixes-for-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
git bisect bad 684c8ccc40d7e5408d597a43712bad3827d3fb94
# bad: [e44b59cd758acdd413512d4597a1fabdadfe3abf] Merge tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
git bisect bad e44b59cd758acdd413512d4597a1fabdadfe3abf
# good: [91a9a90d040e8b9ff63d48ea71468e0f4db764ff] Merge tag 'sched_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good 91a9a90d040e8b9ff63d48ea71468e0f4db764ff
# bad: [42d3f7e8da1bc55e3109f612c519c945f6587194] Merge tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
git bisect bad 42d3f7e8da1bc55e3109f612c519c945f6587194
# bad: [6d89c73ca5813768a2cc66f7420ac0cbddf4f37d] Merge tag 'arm-soc/for-5.8/soc-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
git bisect bad 6d89c73ca5813768a2cc66f7420ac0cbddf4f37d
# bad: [0f77ce26ebcf6ea384421d2dd47b924b83649692] Revert "ARM: sti: Implement dummy L2 cache's write_sec"
git bisect bad 0f77ce26ebcf6ea384421d2dd47b924b83649692
# bad: [d68ec1644dd546851d651787a638aead32a60a6f] Merge tag 'juno-fix-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
git bisect bad d68ec1644dd546851d651787a638aead32a60a6f
# bad: [38ac46002d1df5707566a73486452851341028d2] arm: dts: vexpress: Move mcc node back into motherboard node
git bisect bad 38ac46002d1df5707566a73486452851341028d2
# first bad commit: [38ac46002d1df5707566a73486452851341028d2] arm: dts: vexpress: Move mcc node back into motherboard node
-------------------------------------------------------------------------------
^ permalink raw reply related [flat|nested] 12+ messages in thread
* mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
@ 2020-07-08 22:10 kernelci.org bot
0 siblings, 0 replies; 12+ messages in thread
From: kernelci.org bot @ 2020-07-08 22:10 UTC (permalink / raw)
To: kernelci-results, Andre Przywara, Sudeep Holla, gtucker
Cc: Liviu Dudau, devicetree, Rob Herring, Lorenzo Pieralisi,
linux-arm-kernel, linux-kernel
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This automated bisection report was sent to you on the basis *
* that you may be involved with the breaking commit it has *
* found. No manual investigation has been done to verify it, *
* and the root cause of the problem may be somewhere else. *
* *
* If you do send a fix, please include this trailer: *
* Reported-by: "kernelci.org bot" <bot@kernelci.org> *
* *
* Hope this helps! *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
Summary:
Start: dcde237b9b0e Merge tag 'perf-tools-fixes-2020-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Plain log: https://storage.kernelci.org/mainline/master/v5.8-rc4-61-gdcde237b9b0e/arm/vexpress_defconfig/gcc-8/lab-collabora/baseline-vexpress-v2p-ca15-tc1.txt
HTML log: https://storage.kernelci.org/mainline/master/v5.8-rc4-61-gdcde237b9b0e/arm/vexpress_defconfig/gcc-8/lab-collabora/baseline-vexpress-v2p-ca15-tc1.html
Result: 38ac46002d1d arm: dts: vexpress: Move mcc node back into motherboard node
Checks:
revert: PASS
verify: PASS
Parameters:
Tree: mainline
URL: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Branch: master
Target: qemu_arm-vexpress-a15
CPU arch: arm
Lab: lab-collabora
Compiler: gcc-8
Config: vexpress_defconfig
Test case: baseline.dmesg.crit
Breaking commit found:
-------------------------------------------------------------------------------
commit 38ac46002d1df5707566a73486452851341028d2
Author: Andre Przywara <andre.przywara@arm.com>
Date: Wed Jun 3 17:22:37 2020 +0100
arm: dts: vexpress: Move mcc node back into motherboard node
Commit d9258898ad49 ("arm64: dts: arm: vexpress: Move fixed devices
out of bus node") moved the "mcc" DT node into the root node, because
it does not have any children using "reg" properties, so does violate
some dtc checks about "simple-bus" nodes.
However this broke the vexpress config-bus code, which walks up the
device tree to find the first node with an "arm,vexpress,site" property.
This gave the wrong result (matching the root node instead of the
motherboard node), so broke the clocks and some other devices for
VExpress boards.
Move the whole node back into its original position. This re-introduces
the dtc warning, but is conceptually the right thing to do. The dtc
warning seems to be overzealous here, there are discussions on fixing or
relaxing this check instead.
Link: https://lore.kernel.org/r/20200603162237.16319-1-andre.przywara@arm.com
Fixes: d9258898ad49 ("arm64: dts: vexpress: Move fixed devices out of bus node")
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index e6308fb76183..a88ee5294d35 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -100,79 +100,6 @@
};
};
- mcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
-
- oscclk0 {
- /* MCC static memory clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 0>;
- freq-range = <25000000 60000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk0";
- };
-
- v2m_oscclk1: oscclk1 {
- /* CLCD clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 1>;
- freq-range = <23750000 65000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk1";
- };
-
- v2m_oscclk2: oscclk2 {
- /* IO FPGA peripheral clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 2>;
- freq-range = <24000000 24000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk2";
- };
-
- volt-vio {
- /* Logic level voltage */
- compatible = "arm,vexpress-volt";
- arm,vexpress-sysreg,func = <2 0>;
- regulator-name = "VIO";
- regulator-always-on;
- label = "VIO";
- };
-
- temp-mcc {
- /* MCC internal operating temperature */
- compatible = "arm,vexpress-temp";
- arm,vexpress-sysreg,func = <4 0>;
- label = "MCC";
- };
-
- reset {
- compatible = "arm,vexpress-reset";
- arm,vexpress-sysreg,func = <5 0>;
- };
-
- muxfpga {
- compatible = "arm,vexpress-muxfpga";
- arm,vexpress-sysreg,func = <7 0>;
- };
-
- shutdown {
- compatible = "arm,vexpress-shutdown";
- arm,vexpress-sysreg,func = <8 0>;
- };
-
- reboot {
- compatible = "arm,vexpress-reboot";
- arm,vexpress-sysreg,func = <9 0>;
- };
-
- dvimode {
- compatible = "arm,vexpress-dvimode";
- arm,vexpress-sysreg,func = <11 0>;
- };
- };
-
bus@8000000 {
motherboard-bus {
model = "V2M-P1";
@@ -435,6 +362,79 @@
};
};
};
+
+ mcc {
+ compatible = "arm,vexpress,config-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ oscclk0 {
+ /* MCC static memory clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 0>;
+ freq-range = <25000000 60000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk0";
+ };
+
+ v2m_oscclk1: oscclk1 {
+ /* CLCD clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <23750000 65000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk1";
+ };
+
+ v2m_oscclk2: oscclk2 {
+ /* IO FPGA peripheral clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 2>;
+ freq-range = <24000000 24000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk2";
+ };
+
+ volt-vio {
+ /* Logic level voltage */
+ compatible = "arm,vexpress-volt";
+ arm,vexpress-sysreg,func = <2 0>;
+ regulator-name = "VIO";
+ regulator-always-on;
+ label = "VIO";
+ };
+
+ temp-mcc {
+ /* MCC internal operating temperature */
+ compatible = "arm,vexpress-temp";
+ arm,vexpress-sysreg,func = <4 0>;
+ label = "MCC";
+ };
+
+ reset {
+ compatible = "arm,vexpress-reset";
+ arm,vexpress-sysreg,func = <5 0>;
+ };
+
+ muxfpga {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
+
+ shutdown {
+ compatible = "arm,vexpress-shutdown";
+ arm,vexpress-sysreg,func = <8 0>;
+ };
+
+ reboot {
+ compatible = "arm,vexpress-reboot";
+ arm,vexpress-sysreg,func = <9 0>;
+ };
+
+ dvimode {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
+ };
};
};
};
-------------------------------------------------------------------------------
Git bisection log:
-------------------------------------------------------------------------------
git bisect start
# good: [719fdd32921fb7e3208db8832d32ae1c2d68900f] afs: Fix storage of cell names
git bisect good 719fdd32921fb7e3208db8832d32ae1c2d68900f
# bad: [dcde237b9b0eb1d19306e6f48c0a4e058907619f] Merge tag 'perf-tools-fixes-2020-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
git bisect bad dcde237b9b0eb1d19306e6f48c0a4e058907619f
# bad: [442ad2254ac56b39870c0cfed96d500921fea5d5] perf record: Fix duplicated sideband events with Intel PT system wide tracing
git bisect bad 442ad2254ac56b39870c0cfed96d500921fea5d5
# bad: [f7db192b2d71ea42627a32349d59a5f99f2aafcc] Merge tag 'arm-omap-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
git bisect bad f7db192b2d71ea42627a32349d59a5f99f2aafcc
# good: [ae71d4bf0074a81cc04255c96e3de0a49b1d95fa] Merge tag 'perf-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good ae71d4bf0074a81cc04255c96e3de0a49b1d95fa
# good: [d528945d7762be94beca4c111bb95dcc9a9f39c0] Merge tag 'omap-for-v5.8/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/omap-fixes
git bisect good d528945d7762be94beca4c111bb95dcc9a9f39c0
# bad: [2596ce4b4ded685b67fed407aed2bfe6ebcc39cb] Merge tag 'arm-soc/for-5.8/drivers-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
git bisect bad 2596ce4b4ded685b67fed407aed2bfe6ebcc39cb
# bad: [0f77ce26ebcf6ea384421d2dd47b924b83649692] Revert "ARM: sti: Implement dummy L2 cache's write_sec"
git bisect bad 0f77ce26ebcf6ea384421d2dd47b924b83649692
# bad: [d68ec1644dd546851d651787a638aead32a60a6f] Merge tag 'juno-fix-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
git bisect bad d68ec1644dd546851d651787a638aead32a60a6f
# bad: [38ac46002d1df5707566a73486452851341028d2] arm: dts: vexpress: Move mcc node back into motherboard node
git bisect bad 38ac46002d1df5707566a73486452851341028d2
# first bad commit: [38ac46002d1df5707566a73486452851341028d2] arm: dts: vexpress: Move mcc node back into motherboard node
-------------------------------------------------------------------------------
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
2020-07-06 2:12 kernelci.org bot
@ 2020-07-06 12:49 ` Sudeep Holla
2020-07-16 8:57 ` Guillaume Tucker
0 siblings, 1 reply; 12+ messages in thread
From: Sudeep Holla @ 2020-07-06 12:49 UTC (permalink / raw)
To: kernelci.org bot, gtucker, kernelci-results
Cc: Andre Przywara, linux-arm-kernel, Rob Herring, Lorenzo Pieralisi,
Sudeep Holla, devicetree, Liviu Dudau, linux-kernel
Hi,
On Sun, Jul 05, 2020 at 07:12:58PM -0700, kernelci.org bot wrote:
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> * This automated bisection report was sent to you on the basis *
> * that you may be involved with the breaking commit it has *
> * found. No manual investigation has been done to verify it, *
> * and the root cause of the problem may be somewhere else. *
> * *
> * If you do send a fix, please include this trailer: *
> * Reported-by: "kernelci.org bot" <bot@kernelci.org> *
> * *
> * Hope this helps! *
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>
Andre test and replied to one of the similar but earlier reports.
Unless we get some response to that, we can't proceed and we can't
do much other than ignoring these reports. Please respond to Andre's
queries.
--
Regards,
Sudeep
^ permalink raw reply [flat|nested] 12+ messages in thread
* mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
@ 2020-07-06 2:12 kernelci.org bot
2020-07-06 12:49 ` Sudeep Holla
0 siblings, 1 reply; 12+ messages in thread
From: kernelci.org bot @ 2020-07-06 2:12 UTC (permalink / raw)
To: gtucker, Sudeep Holla, kernelci-results, Andre Przywara
Cc: linux-arm-kernel, Rob Herring, Lorenzo Pieralisi, devicetree,
Liviu Dudau, linux-kernel
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This automated bisection report was sent to you on the basis *
* that you may be involved with the breaking commit it has *
* found. No manual investigation has been done to verify it, *
* and the root cause of the problem may be somewhere else. *
* *
* If you do send a fix, please include this trailer: *
* Reported-by: "kernelci.org bot" <bot@kernelci.org> *
* *
* Hope this helps! *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
Summary:
Start: bb5a93aaf252 x86/ldt: use "pr_info_once()" instead of open-coding it badly
Plain log: https://storage.kernelci.org/mainline/master/v5.8-rc3-225-gbb5a93aaf252/arm/vexpress_defconfig/gcc-8/lab-cip/baseline-vexpress-v2p-ca15-tc1.txt
HTML log: https://storage.kernelci.org/mainline/master/v5.8-rc3-225-gbb5a93aaf252/arm/vexpress_defconfig/gcc-8/lab-cip/baseline-vexpress-v2p-ca15-tc1.html
Result: 38ac46002d1d arm: dts: vexpress: Move mcc node back into motherboard node
Checks:
revert: PASS
verify: PASS
Parameters:
Tree: mainline
URL: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Branch: master
Target: qemu_arm-vexpress-a15
CPU arch: arm
Lab: lab-cip
Compiler: gcc-8
Config: vexpress_defconfig
Test case: baseline.dmesg.crit
Breaking commit found:
-------------------------------------------------------------------------------
commit 38ac46002d1df5707566a73486452851341028d2
Author: Andre Przywara <andre.przywara@arm.com>
Date: Wed Jun 3 17:22:37 2020 +0100
arm: dts: vexpress: Move mcc node back into motherboard node
Commit d9258898ad49 ("arm64: dts: arm: vexpress: Move fixed devices
out of bus node") moved the "mcc" DT node into the root node, because
it does not have any children using "reg" properties, so does violate
some dtc checks about "simple-bus" nodes.
However this broke the vexpress config-bus code, which walks up the
device tree to find the first node with an "arm,vexpress,site" property.
This gave the wrong result (matching the root node instead of the
motherboard node), so broke the clocks and some other devices for
VExpress boards.
Move the whole node back into its original position. This re-introduces
the dtc warning, but is conceptually the right thing to do. The dtc
warning seems to be overzealous here, there are discussions on fixing or
relaxing this check instead.
Link: https://lore.kernel.org/r/20200603162237.16319-1-andre.przywara@arm.com
Fixes: d9258898ad49 ("arm64: dts: vexpress: Move fixed devices out of bus node")
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index e6308fb76183..a88ee5294d35 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -100,79 +100,6 @@
};
};
- mcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
-
- oscclk0 {
- /* MCC static memory clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 0>;
- freq-range = <25000000 60000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk0";
- };
-
- v2m_oscclk1: oscclk1 {
- /* CLCD clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 1>;
- freq-range = <23750000 65000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk1";
- };
-
- v2m_oscclk2: oscclk2 {
- /* IO FPGA peripheral clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 2>;
- freq-range = <24000000 24000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk2";
- };
-
- volt-vio {
- /* Logic level voltage */
- compatible = "arm,vexpress-volt";
- arm,vexpress-sysreg,func = <2 0>;
- regulator-name = "VIO";
- regulator-always-on;
- label = "VIO";
- };
-
- temp-mcc {
- /* MCC internal operating temperature */
- compatible = "arm,vexpress-temp";
- arm,vexpress-sysreg,func = <4 0>;
- label = "MCC";
- };
-
- reset {
- compatible = "arm,vexpress-reset";
- arm,vexpress-sysreg,func = <5 0>;
- };
-
- muxfpga {
- compatible = "arm,vexpress-muxfpga";
- arm,vexpress-sysreg,func = <7 0>;
- };
-
- shutdown {
- compatible = "arm,vexpress-shutdown";
- arm,vexpress-sysreg,func = <8 0>;
- };
-
- reboot {
- compatible = "arm,vexpress-reboot";
- arm,vexpress-sysreg,func = <9 0>;
- };
-
- dvimode {
- compatible = "arm,vexpress-dvimode";
- arm,vexpress-sysreg,func = <11 0>;
- };
- };
-
bus@8000000 {
motherboard-bus {
model = "V2M-P1";
@@ -435,6 +362,79 @@
};
};
};
+
+ mcc {
+ compatible = "arm,vexpress,config-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ oscclk0 {
+ /* MCC static memory clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 0>;
+ freq-range = <25000000 60000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk0";
+ };
+
+ v2m_oscclk1: oscclk1 {
+ /* CLCD clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <23750000 65000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk1";
+ };
+
+ v2m_oscclk2: oscclk2 {
+ /* IO FPGA peripheral clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 2>;
+ freq-range = <24000000 24000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk2";
+ };
+
+ volt-vio {
+ /* Logic level voltage */
+ compatible = "arm,vexpress-volt";
+ arm,vexpress-sysreg,func = <2 0>;
+ regulator-name = "VIO";
+ regulator-always-on;
+ label = "VIO";
+ };
+
+ temp-mcc {
+ /* MCC internal operating temperature */
+ compatible = "arm,vexpress-temp";
+ arm,vexpress-sysreg,func = <4 0>;
+ label = "MCC";
+ };
+
+ reset {
+ compatible = "arm,vexpress-reset";
+ arm,vexpress-sysreg,func = <5 0>;
+ };
+
+ muxfpga {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
+
+ shutdown {
+ compatible = "arm,vexpress-shutdown";
+ arm,vexpress-sysreg,func = <8 0>;
+ };
+
+ reboot {
+ compatible = "arm,vexpress-reboot";
+ arm,vexpress-sysreg,func = <9 0>;
+ };
+
+ dvimode {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
+ };
};
};
};
-------------------------------------------------------------------------------
Git bisection log:
-------------------------------------------------------------------------------
git bisect start
# good: [719fdd32921fb7e3208db8832d32ae1c2d68900f] afs: Fix storage of cell names
git bisect good 719fdd32921fb7e3208db8832d32ae1c2d68900f
# bad: [bb5a93aaf25261321db0c499cde7da6ee9d8b164] x86/ldt: use "pr_info_once()" instead of open-coding it badly
git bisect bad bb5a93aaf25261321db0c499cde7da6ee9d8b164
# bad: [0c7415c31ea9482c4377287af5f459778bf64d2a] Merge tag 'tpmdd-next-v5.8-rc4' of git://git.infradead.org/users/jjs/linux-tpmdd
git bisect bad 0c7415c31ea9482c4377287af5f459778bf64d2a
# bad: [e44b59cd758acdd413512d4597a1fabdadfe3abf] Merge tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
git bisect bad e44b59cd758acdd413512d4597a1fabdadfe3abf
# good: [91a9a90d040e8b9ff63d48ea71468e0f4db764ff] Merge tag 'sched_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good 91a9a90d040e8b9ff63d48ea71468e0f4db764ff
# bad: [42d3f7e8da1bc55e3109f612c519c945f6587194] Merge tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
git bisect bad 42d3f7e8da1bc55e3109f612c519c945f6587194
# bad: [6d89c73ca5813768a2cc66f7420ac0cbddf4f37d] Merge tag 'arm-soc/for-5.8/soc-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
git bisect bad 6d89c73ca5813768a2cc66f7420ac0cbddf4f37d
# bad: [0f77ce26ebcf6ea384421d2dd47b924b83649692] Revert "ARM: sti: Implement dummy L2 cache's write_sec"
git bisect bad 0f77ce26ebcf6ea384421d2dd47b924b83649692
# bad: [d68ec1644dd546851d651787a638aead32a60a6f] Merge tag 'juno-fix-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
git bisect bad d68ec1644dd546851d651787a638aead32a60a6f
# bad: [38ac46002d1df5707566a73486452851341028d2] arm: dts: vexpress: Move mcc node back into motherboard node
git bisect bad 38ac46002d1df5707566a73486452851341028d2
# first bad commit: [38ac46002d1df5707566a73486452851341028d2] arm: dts: vexpress: Move mcc node back into motherboard node
-------------------------------------------------------------------------------
^ permalink raw reply related [flat|nested] 12+ messages in thread
* mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
@ 2020-07-03 14:33 kernelci.org bot
0 siblings, 0 replies; 12+ messages in thread
From: kernelci.org bot @ 2020-07-03 14:33 UTC (permalink / raw)
To: kernelci-results, gtucker, Andre Przywara, Sudeep Holla
Cc: linux-kernel, devicetree, Rob Herring, Liviu Dudau,
linux-arm-kernel, Lorenzo Pieralisi
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This automated bisection report was sent to you on the basis *
* that you may be involved with the breaking commit it has *
* found. No manual investigation has been done to verify it, *
* and the root cause of the problem may be somewhere else. *
* *
* If you do send a fix, please include this trailer: *
* Reported-by: "kernelci.org bot" <bot@kernelci.org> *
* *
* Hope this helps! *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
Summary:
Start: cdd3bb54332f Merge tag 'm68knommu-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Plain log: https://storage.kernelci.org/mainline/master/v5.8-rc3-82-gcdd3bb54332f/arm/vexpress_defconfig/gcc-8/lab-cip/baseline-vexpress-v2p-ca15-tc1.txt
HTML log: https://storage.kernelci.org/mainline/master/v5.8-rc3-82-gcdd3bb54332f/arm/vexpress_defconfig/gcc-8/lab-cip/baseline-vexpress-v2p-ca15-tc1.html
Result: 38ac46002d1d arm: dts: vexpress: Move mcc node back into motherboard node
Checks:
revert: PASS
verify: PASS
Parameters:
Tree: mainline
URL: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Branch: master
Target: qemu_arm-vexpress-a15
CPU arch: arm
Lab: lab-cip
Compiler: gcc-8
Config: vexpress_defconfig
Test case: baseline.dmesg.crit
Breaking commit found:
-------------------------------------------------------------------------------
commit 38ac46002d1df5707566a73486452851341028d2
Author: Andre Przywara <andre.przywara@arm.com>
Date: Wed Jun 3 17:22:37 2020 +0100
arm: dts: vexpress: Move mcc node back into motherboard node
Commit d9258898ad49 ("arm64: dts: arm: vexpress: Move fixed devices
out of bus node") moved the "mcc" DT node into the root node, because
it does not have any children using "reg" properties, so does violate
some dtc checks about "simple-bus" nodes.
However this broke the vexpress config-bus code, which walks up the
device tree to find the first node with an "arm,vexpress,site" property.
This gave the wrong result (matching the root node instead of the
motherboard node), so broke the clocks and some other devices for
VExpress boards.
Move the whole node back into its original position. This re-introduces
the dtc warning, but is conceptually the right thing to do. The dtc
warning seems to be overzealous here, there are discussions on fixing or
relaxing this check instead.
Link: https://lore.kernel.org/r/20200603162237.16319-1-andre.przywara@arm.com
Fixes: d9258898ad49 ("arm64: dts: vexpress: Move fixed devices out of bus node")
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index e6308fb76183..a88ee5294d35 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -100,79 +100,6 @@
};
};
- mcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
-
- oscclk0 {
- /* MCC static memory clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 0>;
- freq-range = <25000000 60000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk0";
- };
-
- v2m_oscclk1: oscclk1 {
- /* CLCD clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 1>;
- freq-range = <23750000 65000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk1";
- };
-
- v2m_oscclk2: oscclk2 {
- /* IO FPGA peripheral clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 2>;
- freq-range = <24000000 24000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk2";
- };
-
- volt-vio {
- /* Logic level voltage */
- compatible = "arm,vexpress-volt";
- arm,vexpress-sysreg,func = <2 0>;
- regulator-name = "VIO";
- regulator-always-on;
- label = "VIO";
- };
-
- temp-mcc {
- /* MCC internal operating temperature */
- compatible = "arm,vexpress-temp";
- arm,vexpress-sysreg,func = <4 0>;
- label = "MCC";
- };
-
- reset {
- compatible = "arm,vexpress-reset";
- arm,vexpress-sysreg,func = <5 0>;
- };
-
- muxfpga {
- compatible = "arm,vexpress-muxfpga";
- arm,vexpress-sysreg,func = <7 0>;
- };
-
- shutdown {
- compatible = "arm,vexpress-shutdown";
- arm,vexpress-sysreg,func = <8 0>;
- };
-
- reboot {
- compatible = "arm,vexpress-reboot";
- arm,vexpress-sysreg,func = <9 0>;
- };
-
- dvimode {
- compatible = "arm,vexpress-dvimode";
- arm,vexpress-sysreg,func = <11 0>;
- };
- };
-
bus@8000000 {
motherboard-bus {
model = "V2M-P1";
@@ -435,6 +362,79 @@
};
};
};
+
+ mcc {
+ compatible = "arm,vexpress,config-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ oscclk0 {
+ /* MCC static memory clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 0>;
+ freq-range = <25000000 60000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk0";
+ };
+
+ v2m_oscclk1: oscclk1 {
+ /* CLCD clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <23750000 65000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk1";
+ };
+
+ v2m_oscclk2: oscclk2 {
+ /* IO FPGA peripheral clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 2>;
+ freq-range = <24000000 24000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk2";
+ };
+
+ volt-vio {
+ /* Logic level voltage */
+ compatible = "arm,vexpress-volt";
+ arm,vexpress-sysreg,func = <2 0>;
+ regulator-name = "VIO";
+ regulator-always-on;
+ label = "VIO";
+ };
+
+ temp-mcc {
+ /* MCC internal operating temperature */
+ compatible = "arm,vexpress-temp";
+ arm,vexpress-sysreg,func = <4 0>;
+ label = "MCC";
+ };
+
+ reset {
+ compatible = "arm,vexpress-reset";
+ arm,vexpress-sysreg,func = <5 0>;
+ };
+
+ muxfpga {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
+
+ shutdown {
+ compatible = "arm,vexpress-shutdown";
+ arm,vexpress-sysreg,func = <8 0>;
+ };
+
+ reboot {
+ compatible = "arm,vexpress-reboot";
+ arm,vexpress-sysreg,func = <9 0>;
+ };
+
+ dvimode {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
+ };
};
};
};
-------------------------------------------------------------------------------
Git bisection log:
-------------------------------------------------------------------------------
git bisect start
# good: [719fdd32921fb7e3208db8832d32ae1c2d68900f] afs: Fix storage of cell names
git bisect good 719fdd32921fb7e3208db8832d32ae1c2d68900f
# bad: [cdd3bb54332f82295ed90cd0c09c78cd0c0ee822] Merge tag 'm68knommu-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
git bisect bad cdd3bb54332f82295ed90cd0c09c78cd0c0ee822
# bad: [f7db192b2d71ea42627a32349d59a5f99f2aafcc] Merge tag 'arm-omap-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
git bisect bad f7db192b2d71ea42627a32349d59a5f99f2aafcc
# good: [ae71d4bf0074a81cc04255c96e3de0a49b1d95fa] Merge tag 'perf-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good ae71d4bf0074a81cc04255c96e3de0a49b1d95fa
# good: [d528945d7762be94beca4c111bb95dcc9a9f39c0] Merge tag 'omap-for-v5.8/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/omap-fixes
git bisect good d528945d7762be94beca4c111bb95dcc9a9f39c0
# bad: [2596ce4b4ded685b67fed407aed2bfe6ebcc39cb] Merge tag 'arm-soc/for-5.8/drivers-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
git bisect bad 2596ce4b4ded685b67fed407aed2bfe6ebcc39cb
# bad: [0f77ce26ebcf6ea384421d2dd47b924b83649692] Revert "ARM: sti: Implement dummy L2 cache's write_sec"
git bisect bad 0f77ce26ebcf6ea384421d2dd47b924b83649692
# bad: [d68ec1644dd546851d651787a638aead32a60a6f] Merge tag 'juno-fix-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
git bisect bad d68ec1644dd546851d651787a638aead32a60a6f
# bad: [38ac46002d1df5707566a73486452851341028d2] arm: dts: vexpress: Move mcc node back into motherboard node
git bisect bad 38ac46002d1df5707566a73486452851341028d2
# first bad commit: [38ac46002d1df5707566a73486452851341028d2] arm: dts: vexpress: Move mcc node back into motherboard node
-------------------------------------------------------------------------------
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
2020-07-03 5:38 kernelci.org bot
@ 2020-07-03 10:49 ` André Przywara
2020-07-16 9:37 ` Guillaume Tucker
0 siblings, 1 reply; 12+ messages in thread
From: André Przywara @ 2020-07-03 10:49 UTC (permalink / raw)
To: kernelci.org bot, Sudeep Holla, kernelci-results, gtucker
Cc: linux-kernel, devicetree, linux-arm-kernel, Rob Herring,
Liviu Dudau, Lorenzo Pieralisi
On 03/07/2020 06:38, kernelci.org bot wrote:
Hi Guillaume,
is this report legit? The situation didn't change from Monday, I just
repeated the test with mainline compared to my patch reverted.
What is the actual failure here? You pointed to:
<2>GIC CPU mask not found - kernel will fail to boot.
but I don't see any explicit line stating that as the culprit anywhere
in the logs. Actually the last line says:
00:24:07.022224 Job finished correctly
And I see the GIC messages with and without this patch. As mentioned on
Monday, "-smp 2" should be added to the QEMU command line to fix that.
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> * This automated bisection report was sent to you on the basis *
> * that you may be involved with the breaking commit it has *
> * found. No manual investigation has been done to verify it, *
> * and the root cause of the problem may be somewhere else. *
> * *
> * If you do send a fix, please include this trailer: *
> * Reported-by: "kernelci.org bot" <bot@kernelci.org> *
> * *
> * Hope this helps! *
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>
> mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
>
> Summary:
> Start: 7cc2a8ea1048 Merge tag 'block-5.8-2020-07-01' of git://git.kernel.dk/linux-block
> Plain log: https://storage.kernelci.org/mainline/master/v5.8-rc3-37-g7cc2a8ea1048/arm/vexpress_defconfig/gcc-8/lab-cip/baseline-vexpress-v2p-ca15-tc1.txt
> HTML log: https://storage.kernelci.org/mainline/master/v5.8-rc3-37-g7cc2a8ea1048/arm/vexpress_defconfig/gcc-8/lab-cip/baseline-vexpress-v2p-ca15-tc1.html
> Result: 38ac46002d1d arm: dts: vexpress: Move mcc node back into motherboard node
>
> Checks:
> revert: PASS
> verify: PASS
What does that mean? That reverting the patch made the test pass?
I did exactly that, and reverting made it worse, because poweroff
doesn't work (among other things).
So could this be a testing artifact? Because of the failing poweroff the
test timed out or something?
Many thanks,
Andre
>
> Parameters:
> Tree: mainline
> URL: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> Branch: master
> Target: qemu_arm-vexpress-a15
> CPU arch: arm
> Lab: lab-cip
> Compiler: gcc-8
> Config: vexpress_defconfig
> Test case: baseline.dmesg.crit
>
> Breaking commit found:
>
> -------------------------------------------------------------------------------
> commit 38ac46002d1df5707566a73486452851341028d2
> Author: Andre Przywara <andre.przywara@arm.com>
> Date: Wed Jun 3 17:22:37 2020 +0100
>
> arm: dts: vexpress: Move mcc node back into motherboard node
>
> Commit d9258898ad49 ("arm64: dts: arm: vexpress: Move fixed devices
> out of bus node") moved the "mcc" DT node into the root node, because
> it does not have any children using "reg" properties, so does violate
> some dtc checks about "simple-bus" nodes.
>
> However this broke the vexpress config-bus code, which walks up the
> device tree to find the first node with an "arm,vexpress,site" property.
> This gave the wrong result (matching the root node instead of the
> motherboard node), so broke the clocks and some other devices for
> VExpress boards.
>
> Move the whole node back into its original position. This re-introduces
> the dtc warning, but is conceptually the right thing to do. The dtc
> warning seems to be overzealous here, there are discussions on fixing or
> relaxing this check instead.
>
> Link: https://lore.kernel.org/r/20200603162237.16319-1-andre.przywara@arm.com
> Fixes: d9258898ad49 ("arm64: dts: vexpress: Move fixed devices out of bus node")
> Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
>
> diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
> index e6308fb76183..a88ee5294d35 100644
> --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
> +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
> @@ -100,79 +100,6 @@
> };
> };
>
> - mcc {
> - compatible = "arm,vexpress,config-bus";
> - arm,vexpress,config-bridge = <&v2m_sysreg>;
> -
> - oscclk0 {
> - /* MCC static memory clock */
> - compatible = "arm,vexpress-osc";
> - arm,vexpress-sysreg,func = <1 0>;
> - freq-range = <25000000 60000000>;
> - #clock-cells = <0>;
> - clock-output-names = "v2m:oscclk0";
> - };
> -
> - v2m_oscclk1: oscclk1 {
> - /* CLCD clock */
> - compatible = "arm,vexpress-osc";
> - arm,vexpress-sysreg,func = <1 1>;
> - freq-range = <23750000 65000000>;
> - #clock-cells = <0>;
> - clock-output-names = "v2m:oscclk1";
> - };
> -
> - v2m_oscclk2: oscclk2 {
> - /* IO FPGA peripheral clock */
> - compatible = "arm,vexpress-osc";
> - arm,vexpress-sysreg,func = <1 2>;
> - freq-range = <24000000 24000000>;
> - #clock-cells = <0>;
> - clock-output-names = "v2m:oscclk2";
> - };
> -
> - volt-vio {
> - /* Logic level voltage */
> - compatible = "arm,vexpress-volt";
> - arm,vexpress-sysreg,func = <2 0>;
> - regulator-name = "VIO";
> - regulator-always-on;
> - label = "VIO";
> - };
> -
> - temp-mcc {
> - /* MCC internal operating temperature */
> - compatible = "arm,vexpress-temp";
> - arm,vexpress-sysreg,func = <4 0>;
> - label = "MCC";
> - };
> -
> - reset {
> - compatible = "arm,vexpress-reset";
> - arm,vexpress-sysreg,func = <5 0>;
> - };
> -
> - muxfpga {
> - compatible = "arm,vexpress-muxfpga";
> - arm,vexpress-sysreg,func = <7 0>;
> - };
> -
> - shutdown {
> - compatible = "arm,vexpress-shutdown";
> - arm,vexpress-sysreg,func = <8 0>;
> - };
> -
> - reboot {
> - compatible = "arm,vexpress-reboot";
> - arm,vexpress-sysreg,func = <9 0>;
> - };
> -
> - dvimode {
> - compatible = "arm,vexpress-dvimode";
> - arm,vexpress-sysreg,func = <11 0>;
> - };
> - };
> -
> bus@8000000 {
> motherboard-bus {
> model = "V2M-P1";
> @@ -435,6 +362,79 @@
> };
> };
> };
> +
> + mcc {
> + compatible = "arm,vexpress,config-bus";
> + arm,vexpress,config-bridge = <&v2m_sysreg>;
> +
> + oscclk0 {
> + /* MCC static memory clock */
> + compatible = "arm,vexpress-osc";
> + arm,vexpress-sysreg,func = <1 0>;
> + freq-range = <25000000 60000000>;
> + #clock-cells = <0>;
> + clock-output-names = "v2m:oscclk0";
> + };
> +
> + v2m_oscclk1: oscclk1 {
> + /* CLCD clock */
> + compatible = "arm,vexpress-osc";
> + arm,vexpress-sysreg,func = <1 1>;
> + freq-range = <23750000 65000000>;
> + #clock-cells = <0>;
> + clock-output-names = "v2m:oscclk1";
> + };
> +
> + v2m_oscclk2: oscclk2 {
> + /* IO FPGA peripheral clock */
> + compatible = "arm,vexpress-osc";
> + arm,vexpress-sysreg,func = <1 2>;
> + freq-range = <24000000 24000000>;
> + #clock-cells = <0>;
> + clock-output-names = "v2m:oscclk2";
> + };
> +
> + volt-vio {
> + /* Logic level voltage */
> + compatible = "arm,vexpress-volt";
> + arm,vexpress-sysreg,func = <2 0>;
> + regulator-name = "VIO";
> + regulator-always-on;
> + label = "VIO";
> + };
> +
> + temp-mcc {
> + /* MCC internal operating temperature */
> + compatible = "arm,vexpress-temp";
> + arm,vexpress-sysreg,func = <4 0>;
> + label = "MCC";
> + };
> +
> + reset {
> + compatible = "arm,vexpress-reset";
> + arm,vexpress-sysreg,func = <5 0>;
> + };
> +
> + muxfpga {
> + compatible = "arm,vexpress-muxfpga";
> + arm,vexpress-sysreg,func = <7 0>;
> + };
> +
> + shutdown {
> + compatible = "arm,vexpress-shutdown";
> + arm,vexpress-sysreg,func = <8 0>;
> + };
> +
> + reboot {
> + compatible = "arm,vexpress-reboot";
> + arm,vexpress-sysreg,func = <9 0>;
> + };
> +
> + dvimode {
> + compatible = "arm,vexpress-dvimode";
> + arm,vexpress-sysreg,func = <11 0>;
> + };
> + };
> };
> };
> };
> -------------------------------------------------------------------------------
>
>
> Git bisection log:
>
> -------------------------------------------------------------------------------
> git bisect start
> # good: [719fdd32921fb7e3208db8832d32ae1c2d68900f] afs: Fix storage of cell names
> git bisect good 719fdd32921fb7e3208db8832d32ae1c2d68900f
> # bad: [7cc2a8ea104820dd9e702202621e8fd4d9f6c8cf] Merge tag 'block-5.8-2020-07-01' of git://git.kernel.dk/linux-block
> git bisect bad 7cc2a8ea104820dd9e702202621e8fd4d9f6c8cf
> # bad: [e44b59cd758acdd413512d4597a1fabdadfe3abf] Merge tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
> git bisect bad e44b59cd758acdd413512d4597a1fabdadfe3abf
> # good: [91a9a90d040e8b9ff63d48ea71468e0f4db764ff] Merge tag 'sched_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
> git bisect good 91a9a90d040e8b9ff63d48ea71468e0f4db764ff
> # bad: [42d3f7e8da1bc55e3109f612c519c945f6587194] Merge tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
> git bisect bad 42d3f7e8da1bc55e3109f612c519c945f6587194
> # bad: [6d89c73ca5813768a2cc66f7420ac0cbddf4f37d] Merge tag 'arm-soc/for-5.8/soc-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
> git bisect bad 6d89c73ca5813768a2cc66f7420ac0cbddf4f37d
> # bad: [0f77ce26ebcf6ea384421d2dd47b924b83649692] Revert "ARM: sti: Implement dummy L2 cache's write_sec"
> git bisect bad 0f77ce26ebcf6ea384421d2dd47b924b83649692
> # bad: [d68ec1644dd546851d651787a638aead32a60a6f] Merge tag 'juno-fix-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
> git bisect bad d68ec1644dd546851d651787a638aead32a60a6f
> # bad: [38ac46002d1df5707566a73486452851341028d2] arm: dts: vexpress: Move mcc node back into motherboard node
> git bisect bad 38ac46002d1df5707566a73486452851341028d2
> # first bad commit: [38ac46002d1df5707566a73486452851341028d2] arm: dts: vexpress: Move mcc node back into motherboard node
> -------------------------------------------------------------------------------
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
@ 2020-07-03 5:38 kernelci.org bot
2020-07-03 10:49 ` André Przywara
0 siblings, 1 reply; 12+ messages in thread
From: kernelci.org bot @ 2020-07-03 5:38 UTC (permalink / raw)
To: Andre Przywara, Sudeep Holla, kernelci-results, gtucker
Cc: linux-kernel, devicetree, linux-arm-kernel, Rob Herring,
Liviu Dudau, Lorenzo Pieralisi
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This automated bisection report was sent to you on the basis *
* that you may be involved with the breaking commit it has *
* found. No manual investigation has been done to verify it, *
* and the root cause of the problem may be somewhere else. *
* *
* If you do send a fix, please include this trailer: *
* Reported-by: "kernelci.org bot" <bot@kernelci.org> *
* *
* Hope this helps! *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
Summary:
Start: 7cc2a8ea1048 Merge tag 'block-5.8-2020-07-01' of git://git.kernel.dk/linux-block
Plain log: https://storage.kernelci.org/mainline/master/v5.8-rc3-37-g7cc2a8ea1048/arm/vexpress_defconfig/gcc-8/lab-cip/baseline-vexpress-v2p-ca15-tc1.txt
HTML log: https://storage.kernelci.org/mainline/master/v5.8-rc3-37-g7cc2a8ea1048/arm/vexpress_defconfig/gcc-8/lab-cip/baseline-vexpress-v2p-ca15-tc1.html
Result: 38ac46002d1d arm: dts: vexpress: Move mcc node back into motherboard node
Checks:
revert: PASS
verify: PASS
Parameters:
Tree: mainline
URL: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Branch: master
Target: qemu_arm-vexpress-a15
CPU arch: arm
Lab: lab-cip
Compiler: gcc-8
Config: vexpress_defconfig
Test case: baseline.dmesg.crit
Breaking commit found:
-------------------------------------------------------------------------------
commit 38ac46002d1df5707566a73486452851341028d2
Author: Andre Przywara <andre.przywara@arm.com>
Date: Wed Jun 3 17:22:37 2020 +0100
arm: dts: vexpress: Move mcc node back into motherboard node
Commit d9258898ad49 ("arm64: dts: arm: vexpress: Move fixed devices
out of bus node") moved the "mcc" DT node into the root node, because
it does not have any children using "reg" properties, so does violate
some dtc checks about "simple-bus" nodes.
However this broke the vexpress config-bus code, which walks up the
device tree to find the first node with an "arm,vexpress,site" property.
This gave the wrong result (matching the root node instead of the
motherboard node), so broke the clocks and some other devices for
VExpress boards.
Move the whole node back into its original position. This re-introduces
the dtc warning, but is conceptually the right thing to do. The dtc
warning seems to be overzealous here, there are discussions on fixing or
relaxing this check instead.
Link: https://lore.kernel.org/r/20200603162237.16319-1-andre.przywara@arm.com
Fixes: d9258898ad49 ("arm64: dts: vexpress: Move fixed devices out of bus node")
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index e6308fb76183..a88ee5294d35 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -100,79 +100,6 @@
};
};
- mcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
-
- oscclk0 {
- /* MCC static memory clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 0>;
- freq-range = <25000000 60000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk0";
- };
-
- v2m_oscclk1: oscclk1 {
- /* CLCD clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 1>;
- freq-range = <23750000 65000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk1";
- };
-
- v2m_oscclk2: oscclk2 {
- /* IO FPGA peripheral clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 2>;
- freq-range = <24000000 24000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk2";
- };
-
- volt-vio {
- /* Logic level voltage */
- compatible = "arm,vexpress-volt";
- arm,vexpress-sysreg,func = <2 0>;
- regulator-name = "VIO";
- regulator-always-on;
- label = "VIO";
- };
-
- temp-mcc {
- /* MCC internal operating temperature */
- compatible = "arm,vexpress-temp";
- arm,vexpress-sysreg,func = <4 0>;
- label = "MCC";
- };
-
- reset {
- compatible = "arm,vexpress-reset";
- arm,vexpress-sysreg,func = <5 0>;
- };
-
- muxfpga {
- compatible = "arm,vexpress-muxfpga";
- arm,vexpress-sysreg,func = <7 0>;
- };
-
- shutdown {
- compatible = "arm,vexpress-shutdown";
- arm,vexpress-sysreg,func = <8 0>;
- };
-
- reboot {
- compatible = "arm,vexpress-reboot";
- arm,vexpress-sysreg,func = <9 0>;
- };
-
- dvimode {
- compatible = "arm,vexpress-dvimode";
- arm,vexpress-sysreg,func = <11 0>;
- };
- };
-
bus@8000000 {
motherboard-bus {
model = "V2M-P1";
@@ -435,6 +362,79 @@
};
};
};
+
+ mcc {
+ compatible = "arm,vexpress,config-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ oscclk0 {
+ /* MCC static memory clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 0>;
+ freq-range = <25000000 60000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk0";
+ };
+
+ v2m_oscclk1: oscclk1 {
+ /* CLCD clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <23750000 65000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk1";
+ };
+
+ v2m_oscclk2: oscclk2 {
+ /* IO FPGA peripheral clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 2>;
+ freq-range = <24000000 24000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk2";
+ };
+
+ volt-vio {
+ /* Logic level voltage */
+ compatible = "arm,vexpress-volt";
+ arm,vexpress-sysreg,func = <2 0>;
+ regulator-name = "VIO";
+ regulator-always-on;
+ label = "VIO";
+ };
+
+ temp-mcc {
+ /* MCC internal operating temperature */
+ compatible = "arm,vexpress-temp";
+ arm,vexpress-sysreg,func = <4 0>;
+ label = "MCC";
+ };
+
+ reset {
+ compatible = "arm,vexpress-reset";
+ arm,vexpress-sysreg,func = <5 0>;
+ };
+
+ muxfpga {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
+
+ shutdown {
+ compatible = "arm,vexpress-shutdown";
+ arm,vexpress-sysreg,func = <8 0>;
+ };
+
+ reboot {
+ compatible = "arm,vexpress-reboot";
+ arm,vexpress-sysreg,func = <9 0>;
+ };
+
+ dvimode {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
+ };
};
};
};
-------------------------------------------------------------------------------
Git bisection log:
-------------------------------------------------------------------------------
git bisect start
# good: [719fdd32921fb7e3208db8832d32ae1c2d68900f] afs: Fix storage of cell names
git bisect good 719fdd32921fb7e3208db8832d32ae1c2d68900f
# bad: [7cc2a8ea104820dd9e702202621e8fd4d9f6c8cf] Merge tag 'block-5.8-2020-07-01' of git://git.kernel.dk/linux-block
git bisect bad 7cc2a8ea104820dd9e702202621e8fd4d9f6c8cf
# bad: [e44b59cd758acdd413512d4597a1fabdadfe3abf] Merge tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
git bisect bad e44b59cd758acdd413512d4597a1fabdadfe3abf
# good: [91a9a90d040e8b9ff63d48ea71468e0f4db764ff] Merge tag 'sched_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good 91a9a90d040e8b9ff63d48ea71468e0f4db764ff
# bad: [42d3f7e8da1bc55e3109f612c519c945f6587194] Merge tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
git bisect bad 42d3f7e8da1bc55e3109f612c519c945f6587194
# bad: [6d89c73ca5813768a2cc66f7420ac0cbddf4f37d] Merge tag 'arm-soc/for-5.8/soc-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
git bisect bad 6d89c73ca5813768a2cc66f7420ac0cbddf4f37d
# bad: [0f77ce26ebcf6ea384421d2dd47b924b83649692] Revert "ARM: sti: Implement dummy L2 cache's write_sec"
git bisect bad 0f77ce26ebcf6ea384421d2dd47b924b83649692
# bad: [d68ec1644dd546851d651787a638aead32a60a6f] Merge tag 'juno-fix-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
git bisect bad d68ec1644dd546851d651787a638aead32a60a6f
# bad: [38ac46002d1df5707566a73486452851341028d2] arm: dts: vexpress: Move mcc node back into motherboard node
git bisect bad 38ac46002d1df5707566a73486452851341028d2
# first bad commit: [38ac46002d1df5707566a73486452851341028d2] arm: dts: vexpress: Move mcc node back into motherboard node
-------------------------------------------------------------------------------
^ permalink raw reply related [flat|nested] 12+ messages in thread
end of thread, other threads:[~2020-07-16 9:37 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-04 14:20 mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15 kernelci.org bot
-- strict thread matches above, loose matches on Subject: below --
2020-07-16 6:16 kernelci.org bot
2020-07-15 9:35 kernelci.org bot
2020-07-14 11:23 kernelci.org bot
2020-07-08 22:10 kernelci.org bot
2020-07-06 2:12 kernelci.org bot
2020-07-06 12:49 ` Sudeep Holla
2020-07-16 8:57 ` Guillaume Tucker
2020-07-03 14:33 kernelci.org bot
2020-07-03 5:38 kernelci.org bot
2020-07-03 10:49 ` André Przywara
2020-07-16 9:37 ` Guillaume Tucker
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).