From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
To: Ray Chi <raychi@google.com>,
"balbi@kernel.org" <balbi@kernel.org>,
"gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>,
Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: "linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"albertccwang@google.com" <albertccwang@google.com>
Subject: Re: [PATCH] usb: dwc3: add cancelled reason for dwc3 requests
Date: Thu, 25 Mar 2021 20:52:17 +0000 [thread overview]
Message-ID: <5f3f6c78-a584-aaef-3f5d-7734620c433f@synopsys.com> (raw)
In-Reply-To: <20210325115436.861299-1-raychi@google.com>
Hi Ray,
Ray Chi wrote:
> Currently, when dwc3 handles request cancelled, dwc3 just returns
> -ECONNRESET for all requests. It will cause USB class drivers can't
class drivers -> gadget driver or function driver.
> know if the requests are cancelled by other reasons.
>
> This patch will add the reason when the requests are cancelled.
>
> Signed-off-by: Ray Chi <raychi@google.com>
> ---
> drivers/usb/dwc3/gadget.c | 6 +++---
> drivers/usb/dwc3/gadget.h | 10 +++++++++-
> 2 files changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index e1442fc763e1..cc65fc064078 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -1402,7 +1402,7 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep)
> dwc3_stop_active_transfer(dep, true, true);
>
> list_for_each_entry_safe(req, tmp, &dep->started_list, list)
> - dwc3_gadget_move_cancelled_request(req);
> + dwc3_gadget_move_cancelled_request(req, DWC3_REQUEST_DEQUEUED);
>
> /* If ep isn't started, then there's no end transfer pending */
> if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING))
> @@ -1776,7 +1776,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
> * cancelled.
> */
> list_for_each_entry_safe(r, t, &dep->started_list, list)
> - dwc3_gadget_move_cancelled_request(r);
> + dwc3_gadget_move_cancelled_request(r, DWC3_REQUEST_DEQUEUED);
>
> dep->flags &= ~DWC3_EP_WAIT_TRANSFER_COMPLETE;
>
> @@ -1848,7 +1848,7 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
> dwc3_stop_active_transfer(dep, true, true);
>
> list_for_each_entry_safe(req, tmp, &dep->started_list, list)
> - dwc3_gadget_move_cancelled_request(req);
> + dwc3_gadget_move_cancelled_request(req, DWC3_REQUEST_STALL);
>
> if (dep->flags & DWC3_EP_END_TRANSFER_PENDING) {
> dep->flags |= DWC3_EP_PENDING_CLEAR_STALL;
> diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
> index 0cd281949970..a23e85bd3933 100644
> --- a/drivers/usb/dwc3/gadget.h
> +++ b/drivers/usb/dwc3/gadget.h
> @@ -56,6 +56,12 @@ struct dwc3;
>
> /* Frame/Microframe Number Mask */
> #define DWC3_FRNUMBER_MASK 0x3fff
> +
> +/* Cancel reason for dwc3 request */
> +#define DWC3_REQUEST_DEQUEUED -ECONNRESET /* Request get dequeued */
> +#define DWC3_REQUEST_DISCONNECTED -ESHUTDOWN /* Device is disconnected/disabled */
> +#define DWC3_REQUEST_STALL -EPIPE /* Bus or protocol error */
> +
> /* -------------------------------------------------------------------------- */
>
> #define to_dwc3_request(r) (container_of(r, struct dwc3_request, request))
> @@ -90,15 +96,17 @@ static inline void dwc3_gadget_move_started_request(struct dwc3_request *req)
> /**
> * dwc3_gadget_move_cancelled_request - move @req to the cancelled_list
> * @req: the request to be moved
> + * @reason: cancelled reason for the dwc3 request
> *
> * Caller should take care of locking. This function will move @req from its
> * current list to the endpoint's cancelled_list.
> */
> -static inline void dwc3_gadget_move_cancelled_request(struct dwc3_request *req)
> +static inline void dwc3_gadget_move_cancelled_request(struct dwc3_request *req, int reason)
> {
> struct dwc3_ep *dep = req->dep;
>
> req->status = DWC3_REQUEST_STATUS_CANCELLED;
My suggestion previously was to replace DWC3_REQUEST_STATUS_CANCELLED
with more specific status:
DWC3_REQUEST_STATUS_DISCONNECTED
DWC3_REQUEST_STATUS_DEQUEUED
DWC3_REQUEST_STATUS_STALLED
and set req->status = reason;
> + req->request.status = reason;
Not to update this here as this doesn't do anything. Update
dwc3_gadget_ep_cleanup_cancelled_requests() to have a switch case and
provide the appropriate giveback error code base on the status above.
> list_move_tail(&req->list, &dep->cancelled_list);
> }
>
>
BR,
Thinh
prev parent reply other threads:[~2021-03-25 20:53 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-25 11:54 [PATCH] usb: dwc3: add cancelled reason for dwc3 requests Ray Chi
2021-03-25 12:25 ` Felipe Balbi
2021-03-25 21:00 ` Thinh Nguyen
2021-03-25 20:52 ` Thinh Nguyen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5f3f6c78-a584-aaef-3f5d-7734620c433f@synopsys.com \
--to=thinh.nguyen@synopsys.com \
--cc=albertccwang@google.com \
--cc=balbi@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=raychi@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).