From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S936684AbcLOPqF (ORCPT ); Thu, 15 Dec 2016 10:46:05 -0500 Received: from smtprelay2.synopsys.com ([198.182.60.111]:36662 "EHLO smtprelay.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758648AbcLOPqA (ORCPT ); Thu, 15 Dec 2016 10:46:00 -0500 Subject: Re: [PATCH 1/3] dmaengine: xilinx_dma: Check for channel idle state before submitting dma descriptor To: Kedareswara rao Appana , , , , , , , , , , , References: <1481814682-31780-1-git-send-email-appanad@xilinx.com> <1481814682-31780-2-git-send-email-appanad@xilinx.com> CC: , , From: Jose Abreu Message-ID: <5f667b4f-b1f3-df34-ec0d-b62061328642@synopsys.com> Date: Thu, 15 Dec 2016 15:45:49 +0000 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.4.0 MIME-Version: 1.0 In-Reply-To: <1481814682-31780-2-git-send-email-appanad@xilinx.com> Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: 7bit X-Originating-IP: [10.107.19.59] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Kedar, On 15-12-2016 15:11, Kedareswara rao Appana wrote: > Add channel idle state to ensure that dma descriptor is not > submitted when VDMA engine is in progress. > > Signed-off-by: Kedareswara rao Appana > --- > drivers/dma/xilinx/xilinx_dma.c | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c > index 8288fe4..736c2a3 100644 > --- a/drivers/dma/xilinx/xilinx_dma.c > +++ b/drivers/dma/xilinx/xilinx_dma.c > @@ -321,6 +321,7 @@ struct xilinx_dma_tx_descriptor { > * @cyclic: Check for cyclic transfers. > * @genlock: Support genlock mode > * @err: Channel has errors > + * @idle: Check for channel idle > * @tasklet: Cleanup work after irq > * @config: Device configuration info > * @flush_on_fsync: Flush on Frame sync > @@ -351,6 +352,7 @@ struct xilinx_dma_chan { > bool cyclic; > bool genlock; > bool err; > + bool idle; > struct tasklet_struct tasklet; > struct xilinx_vdma_config config; > bool flush_on_fsync; > @@ -966,6 +968,7 @@ static void xilinx_dma_halt(struct xilinx_dma_chan *chan) > chan, dma_ctrl_read(chan, XILINX_DMA_REG_DMASR)); > chan->err = true; > } > + chan->idle = true; > } > > /** > @@ -1007,6 +1010,9 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan) > if (chan->err) > return; > > + if (!chan->idle) > + return; > + > if (list_empty(&chan->pending_list)) > return; > > @@ -1110,6 +1116,7 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan) > vdma_desc_write(chan, XILINX_DMA_REG_VSIZE, last->hw.vsize); > } > > + chan->idle = false; > if (!chan->has_sg) { > list_del(&desc->node); > list_add_tail(&desc->node, &chan->active_list); > @@ -1447,6 +1454,7 @@ static irqreturn_t xilinx_dma_irq_handler(int irq, void *data) > if (status & XILINX_DMA_DMASR_FRM_CNT_IRQ) { > spin_lock(&chan->lock); > xilinx_dma_complete_descriptor(chan); > + chan->idle = true; > chan->start_transfer(chan); > spin_unlock(&chan->lock); > } > @@ -2327,6 +2335,7 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev, > chan->has_sg = xdev->has_sg; > chan->desc_pendingcount = 0x0; > chan->ext_addr = xdev->ext_addr; > + chan->idle = true; > > spin_lock_init(&chan->lock); > INIT_LIST_HEAD(&chan->pending_list); I think there is missing a set to true in idle when a channel reset is performed. Otherwise: Reviewed-by: Jose Abreu Best regards, Jose Miguel Abreu