Linux version 2.6.0-test8 (root@kahlua) (gcc version 3.3.2 (Debian)) #1 Sun Oct 19 16:24:32 EST 2003 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f4db0 hm, page 000f4000 reserved twice. hm, page 000f5000 reserved twice. hm, page 000f0000 reserved twice. hm, page 000f1000 reserved twice. On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 32752 pages, LIFO batch:7 DMI 2.3 present. ACPI: RSDP (v000 GBT ) @ 0x000f6730 ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000 ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040 ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff7280 ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x0] trigger[0x0] lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x3] trigger[0x3]) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Building zonelist for node : 0 Kernel command line: root=/dev/hda2 video=matroxfb:vesa:0x192 console=ttyS0 Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Debug: sleeping function called from invalid context at include/linux/rwsem.h:66 in_atomic():1, irqs_disabled():1 Call Trace: [] __might_sleep+0xa0/0xf0 [] cpufreq_register_notifier+0x2e/0xa0 [] _stext+0x0/0x60 [] init_tsc+0x4c/0x170 [] _stext+0x0/0x60 [] select_timer+0x2f/0x50 [] time_init+0x42/0x70 [] start_kernel+0xb6/0x160 [] unknown_bootoption+0x0/0x100 Detected 2009.799 MHz processor. Console: colour VGA+ 80x25 Memory: 1034072k/1048512k available (1788k kernel code, 13500k reserved, 728k data, 340k init, 131008k highmem) Debug: sleeping function called from invalid context at mm/slab.c:1857 in_atomic():1, irqs_disabled():0 Call Trace: [] __might_sleep+0xa0/0xf0 [] kmem_cache_alloc+0x65/0x70 [] _stext+0x0/0x60 [] kmem_cache_create+0x72/0x4d0 [] mem_init+0x1a0/0x210 [] _stext+0x0/0x60 [] kmem_cache_init+0x11e/0x2c0 [] start_kernel+0xd0/0x160 [] unknown_bootoption+0x0/0x100 Calibrating delay loop... 3956.73 BogoMIPS Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 2400+ stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 testing the IO APIC....................... .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2009.0117 MHz. ..... host bus clock speed is 267.0882 MHz. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfa050, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20031002 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [ALKA] (IRQs 20) ACPI: PCI Interrupt Link [ALKB] (IRQs 21) ACPI: PCI Interrupt Link [ALKC] (IRQs 22) ACPI: PCI Interrupt Link [ALKD] (IRQs 23) drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub _CRS returns NULL! Using IRQ 21 for device (PCI Interrupt Link [ALKB]). ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 _CRS returns NULL! Using IRQ 20 for device (PCI Interrupt Link [ALKA]). ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 _CRS returns NULL! Using IRQ 22 for device (PCI Interrupt Link [ALKC]). ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 _CRS returns NULL! Using IRQ 23 for device (PCI Interrupt Link [ALKD]). ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' matroxfb: Matrox G450 detected matroxfb: MTRR's turned on matroxfb: 1152x864x16bpp (virtual: 1152x65536) matroxfb: framebuffer at 0xD8000000, mapped to 0xf8811000, size 33554432 fb0: MATROX frame buffer device fb0: initializing hardware Machine check exception polling timer started. ikconfig 0.7 with /proc/config* highmem bounce pool size: 64 pages Initializing Cryptographic API PCI: Via IRQ fixup for 0000:00:10.0, from 10 to 5 PCI: Via IRQ fixup for 0000:00:10.1, from 3 to 5 PCI: Via IRQ fixup for 0000:00:10.2, from 11 to 5 ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1, 2 throttling states) Console: switching to colour frame buffer device 144x54 pty: 256 Unix98 ptys configured Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA KT400/KT400A/KT600 chipset agpgart: Maximum main memory to use for agp memory: 941M agpgart: AGP aperture is 128M @ 0xd0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:0a.0: 3Com PCI 3c905C Tornado at 0xd000. Vers LK1.1.19 Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:pio hda: WDC WD800JB-00ETA0, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: Pioneer DVD-ROM ATAPIModel DVD-113 0114, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hda: hda1 hda2 Console: switching to colour frame buffer device 144x54 matroxfb_crtc2: secondary head of fb0 was registered as fb1 drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: irq 21, io base 0000dc00 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: irq 21, io base 0000e000 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: irq 21, io base 0000e400 uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected drivers/usb/core/usb.c: registered new driver hiddev drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET: Registered protocol family 2 hub 1-0:1.0: new USB device on port 1, assigned address 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) ip_conntrack version 2.1 (8191 buckets, 65528 max) - 300 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ NET: Registered protocol family 1 NET: Registered protocol family 17 BIOS EDD facility v0.10 2003-Oct-11, 1 devices found Please report your BIOS at http://domsch.com/linux/edd30/results.html ACPI: (supports S0 S3 S4 S5) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 340k freed INIT: version 2.85 booting Starting Bootlog daemon: bootlogd. Activating swap. Checking root file system... fsck 1.35-WIP (21-Aug-2003) Linux: clean, 99544/809600 filesEXT3 FS on hda2, internal journal , 804738/1616540 blocks System time was Sun Oct 19 06:43:54 UTC 2003. Setting the System Clock using the Hardware Clock as reference... System Clock set. System local time is now Sun Oct 19 16:43:56 EST 2003. Calculating module dependencies... done. Loading modules... All modules loaded. Checking all file systems... fsck 1.35-WIP (21-Aug-2003) Setting kernel variables.. Mounting local filesystems... /dev/shm on /tmp type tmpfs (rw,size=512M) /dev/shm on /var/tmp type tmpfs (rw,size=256M) none on /sys type sysfs (rw) none on /proc/bus/usb type usbfs (rw) Cleaning: /etc/network/ifstate. Setting up IP spoofing protection: rp_filter. Configuring network interfaces... Internet Software Consortium DHCP Client 2.0pl5 Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium. All rights reserved. Please contribute if you find this software useful. For info, please visit http://www.isc.org/dhcp-contrib.html Listening on LPF/eth0/00:50:da:b8:e4:e6 Sending on LPF/eth0/00:50:da:b8:e4:e6 Sending on Socket/fallback/fallback-net DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 210.8.121.68 bound to 210.8.121.79 -- renewal in 900 seconds. done. ttyS1: LSR safety check engaged! ttyS1: LSR safety check engaged! Starting portmap daemon: portmap. Loading the saved-state of the serial devices... /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A /dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A Setting the System Clock using the Hardware Clock as reference... System Clock set. Local time: Sun Oct 19 16:43:59 EST 2003 Cleaning: /tmp /var/lock /var/run. Initializing random number generator... done. Recovering nvi editor sessions... done. Setting up X server socket directory /tmp/.X11-unix...done. INIT: Entering runlevel: 2 Starting system log daemon: syslogd. Starting kernel log daemon: klogd. Starting Advanced Configuration and Power Interface daemon: acpid. Starting mouse interface server: gpm. Starting internet superserver: inetd. Starting printer spooler: lpd. Starting mail transport agent: Postfix. Enabling S.M.A.R.T. for: /dev/hdadrivers/usb/input/hid-core.c: ctrl urb status -104 received drivers/usb/input/hid-core.c: timeout initializing reports input: USB HID v1.00 Mouse [Logitech Inc. iFeel Mouse ] on usb-0000:00:10.0-1 hub 1-0:1.0: new USB device on port 2, assigned address 3 . hub 1-2:1.0: USB hub found Starting S.M.A.Rhub 1-2:1.0: 3 ports detected .T. daemon: smartdhub 3-0:1.0: new USB device on port 2, assigned address 2 hub 1-2:1.0: new USB device on port 1, assigned address 4 input: USB HID v1.00 Keyboard [Chicony PFU-65 USB Keyboard] on usb-0000:00:10.0-2.1 . Starting OpenBSD Secure Shell sehub 1-2:1.0: new USB device on port 3, assigned address 5 rver: sshdinput: USB HID v1.00 Joystick [Microsoft Microsoft SideWinder game controller] on usb-0000:00:10.0-2.3 . Starting deferred execution scheduler: atd. Starting periodic command scheduler: cronbootlogd. Connected to Linux kahlua ttyS0 kahlua login: root Password: Last login: Sun Oct 19 16:42:59 2003 on ttyS0 Linux kahlua 2.6.0-test8 #1 Sun Oct 19 16:24:32 EST 2003 i686 GNU/Linux The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. kahlua:~# modprobe loop loop: loaded (max 8 devices) kahlua:~# modprobe cryptoloop kahlua:~# modprobe aes kahlua:~# losetup -e aes /dev/loop0 /root/foo.dsk Password: kahlua:~# mkfs -t ext2 /dev/loop0 mke2fs 1.35-WIP (21-Aug-2003) Filesystem label= OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) 16384 inodes, 65536 blocks 3276 blocks (5.00%) reserved for the super user First data block=1 8 block groups 8192 blocks per group, 8192 fragments per group 2048 inodes per group Superblock backups stored on blocks: 8193, 24577, 40961, 57345 Writing inode tables: 0/81/82/83/84/85/86/87/8done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 23 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. kahlua:~# ------------[ cut here ]------------ kernel BUG at mm/memory.c:1515! invalid operand: 0000 [#1] CPU: 0 EIP: 0060:[] Not tainted EFLAGS: 00010246 EIP is at do_file_page+0x100/0x110 eax: 00000000 ebx: f7d18200 ecx: fffedffc edx: f7d17bfc esi: 00000001 edi: bffff604 ebp: f7cf1d94 esp: f7cf1d6c ds: 007b es: 007b ss: 0068 Process syslogd (pid: 174, threadinfo=f7cf0000 task=f7d9a0c0) Stack: f7d17bfc 00000ffc f7cf1d94 c0149a54 c19f20e0 00000007 f7dc6440 f7d17bfc bffff604 f7dc6440 f7cf1dc4 c014bd38 f7dc6440 f7d18200 bffff604 00000001 fffedffc f7d17bfc f79e5000 f7dc6440 f7dc6460 f7d18200 f7cf1e74 c011cf90 Call Trace: [] pte_alloc_map+0xa4/0xd0 [] handle_mm_fault+0x88/0x180 [] do_page_fault+0x320/0x53a [] buffered_rmqueue+0xce/0x170 [] schedule+0x2f9/0x580 [] do_page_fault+0x0/0x53a [] error_code+0x2d/0x38 [] setup_frame+0xc2/0x1e0 [] handle_signal+0x106/0x150 [] do_signal+0x95/0xf0 [] sys_select+0x222/0x4d0 [] do_notify_resume+0x3b/0x40 [] work_notifysig+0x13/0x15 Code: 0f 0b eb 05 1b ab 2d c0 e9 2c ff ff ff 8d 76 00 55 ba 00 e0 <6>note: syslogd[174] exited with preempt_count 2 swap_free: Bad swap file entry f820ea5d ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:267! invalid operand: 0000 [#2] CPU: 0 EIP: 0060:[] Not tainted EFLAGS: 00010246 EIP is at free_page_and_swap_cache+0x3d/0x70 eax: 00000000 ebx: c147ebe0 ecx: 00000000 edx: c03d1688 esi: fffed13c edi: 00001000 ebp: f7cf1b4c esp: f7cf1b44 ds: 007b es: 007b ss: 0068 Process syslogd (pid: 174, threadinfo=f7cf0000 task=f7d9a0c0) Stack: fffed13c 00000000 f7cf1b80 c014a0b8 c147ebe0 00000007 00000020 0000007b c147ebe0 1cc4c139 0804f000 c03d1688 f7d17084 0844f000 08050000 f7cf1ba8 c014a13e c03d1688 f7d17080 0804f000 00001000 c03d1688 0804f000 f7d17084 Call Trace: [] zap_pte_range+0x188/0x1c0 [] zap_pmd_range+0x4e/0x70 [] unmap_page_range+0x41/0x70 [] unmap_vmas+0xf0/0x220 [] exit_mmap+0x79/0x190 [] mmput+0x65/0xc0 [] do_exit+0xde/0x410 [] do_invalid_op+0x0/0xc0 [] die+0xe1/0xf0 [] do_invalid_op+0xb3/0xc0 [] do_file_page+0x100/0x110 [] __ext3_journal_stop+0x24/0x50 [] ext3_ordered_commit_write+0xc8/0xe0 [] unlock_page+0x16/0x50 [] error_code+0x2d/0x38 [] do_file_page+0x100/0x110 [] pte_alloc_map+0xa4/0xd0 [] handle_mm_fault+0x88/0x180 [] do_page_fault+0x320/0x53a [] buffered_rmqueue+0xce/0x170 [] schedule+0x2f9/0x580 [] do_page_fault+0x0/0x53a [] error_code+0x2d/0x38 [] setup_frame+0xc2/0x1e0 [] handle_signal+0x106/0x150 [] do_signal+0x95/0xf0 [] sys_select+0x222/0x4d0 [] do_notify_resume+0x3b/0x40 [] work_notifysig+0x13/0x15 Code: 0f 0b 0b 01 0d 85 2d c0 eb dc 0f ba 2b 00 19 c0 85 c0 75 c4 <6>note: syslogd[174] exited with preempt_count 4 Debug: sleeping function called from invalid context at net/socket.c:911 in_atomic():1, irqs_disabled():0 Call Trace: [] __might_sleep+0xa0/0xf0 [] sock_fasync+0x50/0x250 [] sock_close+0x2b/0x50 [] __fput+0x10d/0x120 [] filp_close+0x57/0x80 [] put_files_struct+0x67/0xd0 [] do_exit+0x119/0x410 [] do_invalid_op+0x0/0xc0 [] die+0xe1/0xf0 [] do_invalid_op+0xb3/0xc0 [] free_page_and_swap_cache+0x3d/0x70 [] default_wake_function+0x2a/0x30 [] __wake_up_common+0x31/0x60 [] printk+0x12c/0x180 [] error_code+0x2d/0x38 [] free_page_and_swap_cache+0x3d/0x70 [] zap_pte_range+0x188/0x1c0 [] zap_pmd_range+0x4e/0x70 [] unmap_page_range+0x41/0x70 [] unmap_vmas+0xf0/0x220 [] exit_mmap+0x79/0x190 [] mmput+0x65/0xc0 [] do_exit+0xde/0x410 [] do_invalid_op+0x0/0xc0 [] die+0xe1/0xf0 [] do_invalid_op+0xb3/0xc0 [] do_file_page+0x100/0x110 [] __ext3_journal_stop+0x24/0x50 [] ext3_ordered_commit_write+0xc8/0xe0 [] unlock_page+0x16/0x50 [] error_code+0x2d/0x38 [] do_file_page+0x100/0x110 [] pte_alloc_map+0xa4/0xd0 [] handle_mm_fault+0x88/0x180 [] do_page_fault+0x320/0x53a [] buffered_rmqueue+0xce/0x170 [] schedule+0x2f9/0x580 [] do_page_fault+0x0/0x53a [] error_code+0x2d/0x38 [] setup_frame+0xc2/0x1e0 [] handle_signal+0x106/0x150 [] do_signal+0x95/0xf0 [] sys_select+0x222/0x4d0 [] do_notify_resume+0x3b/0x40 [] work_notifysig+0x13/0x15 Debug: sleeping function called from invalid context at kernel/workqueue.c:237 in_atomic():1, irqs_disabled():0 Call Trace: [] __might_sleep+0xa0/0xf0 [] flush_workqueue+0x1f/0x130 [] __wake_up_common+0x31/0x60 [] fasync_helper+0x8b/0xf0 [] reset_buffer_flags+0x84/0x90 [] release_dev+0x4ce/0x640 [] dput+0x1b9/0x220 [] sock_destroy_inode+0x1d/0x20 [] destroy_inode+0x36/0x50 [] iput+0x63/0x80 [] tty_release+0x2b/0x60 [] __fput+0x10d/0x120 [] filp_close+0x57/0x80 [] put_files_struct+0x67/0xd0 [] do_exit+0x119/0x410 [] do_invalid_op+0x0/0xc0 [] die+0xe1/0xf0 [] do_invalid_op+0xb3/0xc0 [] free_page_and_swap_cache+0x3d/0x70 [] default_wake_function+0x2a/0x30 [] __wake_up_common+0x31/0x60 [] printk+0x12c/0x180 [] error_code+0x2d/0x38 [] free_page_and_swap_cache+0x3d/0x70 [] zap_pte_range+0x188/0x1c0 [] zap_pmd_range+0x4e/0x70 [] unmap_page_range+0x41/0x70 [] unmap_vmas+0xf0/0x220 [] exit_mmap+0x79/0x190 [] mmput+0x65/0xc0 [] do_exit+0xde/0x410 [] do_invalid_op+0x0/0xc0 [] die+0xe1/0xf0 [] do_invalid_op+0xb3/0xc0 [] do_file_page+0x100/0x110 [] __ext3_journal_stop+0x24/0x50 [] ext3_ordered_commit_write+0xc8/0xe0 [] unlock_page+0x16/0x50 [] error_code+0x2d/0x38 [] do_file_page+0x100/0x110 [] pte_alloc_map+0xa4/0xd0 [] handle_mm_fault+0x88/0x180 [] do_page_fault+0x320/0x53a [] buffered_rmqueue+0xce/0x170 [] schedule+0x2f9/0x580 [] do_page_fault+0x0/0x53a [] error_code+0x2d/0x38 [] setup_frame+0xc2/0x1e0 [] handle_signal+0x106/0x150 [] do_signal+0x95/0xf0 [] sys_select+0x222/0x4d0 [] do_notify_resume+0x3b/0x40 [] work_notifysig+0x13/0x15 bad: scheduling while atomic! Call Trace: [] schedule+0x56d/0x580 [] work_notifysig+0x13/0x15 [] dump_stack+0x1e/0x20 [] __might_sleep+0xa0/0xf0 [] flush_workqueue+0xcf/0x130 [] autoremove_wake_function+0x0/0x50 [] reset_buffer_flags+0x84/0x90 [] autoremove_wake_function+0x0/0x50 [] release_dev+0x4ce/0x640 [] dput+0x1b9/0x220 [] sock_destroy_inode+0x1d/0x20 [] destroy_inode+0x36/0x50 [] iput+0x63/0x80 [] tty_release+0x2b/0x60 [] __fput+0x10d/0x120 [] filp_close+0x57/0x80 [] put_files_struct+0x67/0xd0 [] do_exit+0x119/0x410 [] do_invalid_op+0x0/0xc0 [] die+0xe1/0xf0 [] do_invalid_op+0xb3/0xc0 [] free_page_and_swap_cache+0x3d/0x70 [] default_wake_function+0x2a/0x30 [] __wake_up_common+0x31/0x60 [] printk+0x12c/0x180 [] error_code+0x2d/0x38 [] free_page_and_swap_cache+0x3d/0x70 [] zap_pte_range+0x188/0x1c0 [] zap_pmd_range+0x4e/0x70 [] unmap_page_range+0x41/0x70 [] unmap_vmas+0xf0/0x220 [] exit_mmap+0x79/0x190 [] mmput+0x65/0xc0 [] do_exit+0xde/0x410 [] do_invalid_op+0x0/0xc0 [] die+0xe1/0xf0 [] do_invalid_op+0xb3/0xc0 [] do_file_page+0x100/0x110 [] __ext3_journal_stop+0x24/0x50 [] ext3_ordered_commit_write+0xc8/0xe0 [] unlock_page+0x16/0x50 [] error_code+0x2d/0x38 [] do_file_page+0x100/0x110 [] pte_alloc_map+0xa4/0xd0 [] handle_mm_fault+0x88/0x180 [] do_page_fault+0x320/0x53a [] buffered_rmqueue+0xce/0x170 [] schedule+0x2f9/0x580 [] do_page_fault+0x0/0x53a [] error_code+0x2d/0x38 [] setup_frame+0xc2/0x1e0 [] handle_signal+0x106/0x150 [] do_signal+0x95/0xf0 [] sys_select+0x222/0x4d0 [] do_notify_resume+0x3b/0x40 [] work_notifysig+0x13/0x15 swap_dup: Bad swap file entry 60d135f3 VM: killing process klogd Debug: sleeping function called from invalid context at include/asm/semaphore.h:119 in_atomic():1, irqs_disabled():0 Call Trace: [] __might_sleep+0xa0/0xf0 [] pipe_rdwr_fasync+0x26/0xa0 [] iput+0x63/0x80 [] pipe_rdwr_release+0x24/0x50 [] __fput+0x10d/0x120 [] filp_close+0x57/0x80 [] put_files_struct+0x67/0xd0 [] do_exit+0x119/0x410 [] do_invalid_op+0x0/0xc0 [] die+0xe1/0xf0 [] do_invalid_op+0xb3/0xc0 [] free_page_and_swap_cache+0x3d/0x70 [] default_wake_function+0x2a/0x30 [] __wake_up_common+0x31/0x60 [] printk+0x12c/0x180 [] error_code+0x2d/0x38 [] free_page_and_swap_cache+0x3d/0x70 [] zap_pte_range+0x188/0x1c0 [] zap_pmd_range+0x4e/0x70 [] unmap_page_range+0x41/0x70 [] unmap_vmas+0xf0/0x220 [] exit_mmap+0x79/0x190 [] mmput+0x65/0xc0 [] do_exit+0xde/0x410 [] do_invalid_op+0x0/0xc0 [] die+0xe1/0xf0 [] do_invalid_op+0xb3/0xc0 [] do_file_page+0x100/0x110 [] __ext3_journal_stop+0x24/0x50 [] ext3_ordered_commit_write+0xc8/0xe0 [] unlock_page+0x16/0x50 [] error_code+0x2d/0x38 [] do_file_page+0x100/0x110 [] pte_alloc_map+0xa4/0xd0 [] handle_mm_fault+0x88/0x180 [] do_page_fault+0x320/0x53a [] buffered_rmqueue+0xce/0x170 [] schedule+0x2f9/0x580 [] do_page_fault+0x0/0x53a [] error_code+0x2d/0x38 [] setup_frame+0xc2/0x1e0 [] handle_signal+0x106/0x150 [] do_signal+0x95/0xf0 [] sys_select+0x222/0x4d0 [] do_notify_resume+0x3b/0x40 [] work_notifysig+0x13/0x15 ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:267! invalid operand: 0000 [#3] CPU: 0 EIP: 0060:[] Not tainted EFLAGS: 00010246 EIP is at free_page_and_swap_cache+0x3d/0x70 eax: 00000000 ebx: c14713a0 ecx: 00000040 edx: c03d1688 esi: fffed124 edi: 00005000 ebp: f7969db0 esp: f7969da8 ds: 007b es: 007b ss: 0068 Process klogd (pid: 177, threadinfo=f7968000 task=f7cde100) Stack: fffed124 00001000 f7969de4 c014a0b8 c14713a0 00000007 f7969de8 114a2a82 c14713a0 1c6e4eda 08048000 c03d1688 f7cf7084 08448000 0804d000 f7969e0c c014a13e c03d1688 f7cf7080 08048000 00005000 c03d1688 08048000 f7cf7084 Call Trace: [] zap_pte_range+0x188/0x1c0 [] zap_pmd_range+0x4e/0x70 [] unmap_page_range+0x41/0x70 [] unmap_vmas+0xf0/0x220 [] exit_mmap+0x79/0x190 [] mmput+0x65/0xc0 [] do_exit+0xde/0x410 [] do_group_exit+0x3a/0xb0 [] get_signal_to_deliver+0x251/0x360 [] do_signal+0x6a/0xf0 [] default_wake_function+0x0/0x30 [] default_wake_function+0x0/0x30 [] vfs_read+0xa0/0x120 [] sys_read+0x3f/0x60 [] do_invalid_op+0x0/0xc0 [] do_notify_resume+0x3b/0x40 [] work_notifysig+0x13/0x15 Code: 0f 0b 0b 01 0d 85 2d c0 eb dc 0f ba 2b 00 19 c0 85 c0 75 c4 <6>note: klogd[177] exited with preempt_count 2 Debug: sleeping function called from invalid context at net/socket.c:911 in_atomic():1, irqs_disabled():0 Call Trace: [] __might_sleep+0xa0/0xf0 [] sock_fasync+0x50/0x250 [] sock_close+0x2b/0x50 [] __fput+0x10d/0x120 [] filp_close+0x57/0x80 [] put_files_struct+0x67/0xd0 [] do_exit+0x119/0x410 [] do_invalid_op+0x0/0xc0 [] die+0xe1/0xf0 [] do_invalid_op+0xb3/0xc0 [] free_page_and_swap_cache+0x3d/0x70 [] do_IRQ+0x109/0x140 [] common_interrupt+0x18/0x20 [] error_code+0x2d/0x38 [] free_page_and_swap_cache+0x3d/0x70 [] zap_pte_range+0x188/0x1c0 [] zap_pmd_range+0x4e/0x70 [] unmap_page_range+0x41/0x70 [] unmap_vmas+0xf0/0x220 [] exit_mmap+0x79/0x190 [] mmput+0x65/0xc0 [] do_exit+0xde/0x410 [] do_group_exit+0x3a/0xb0 [] get_signal_to_deliver+0x251/0x360 [] do_signal+0x6a/0xf0 [] default_wake_function+0x0/0x30 [] default_wake_function+0x0/0x30 [] vfs_read+0xa0/0x120 [] sys_read+0x3f/0x60 [] do_invalid_op+0x0/0xc0 [] do_notify_resume+0x3b/0x40 [] work_notifysig+0x13/0x15 kahlua:~# reboot Illegal instruction kahlua:~# [RESET]