From: Ying Xue <ying.xue@windriver.com>
To: Taras Kondratiuk <takondra@cisco.com>,
Jon Maloy <jon.maloy@ericsson.com>,
"David S. Miller" <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <tipc-discussion@lists.sourceforge.net>,
<linux-kernel@vger.kernel.org>, <xe-linux-external@cisco.com>,
<stable@vger.kernel.org>
Subject: Re: [PATCH] tipc: compat: allow tipc commands without arguments
Date: Thu, 1 Aug 2019 21:12:36 +0800 [thread overview]
Message-ID: <605b6a6e-8bdd-c95f-ac00-9dd895fcc6a3@windriver.com> (raw)
In-Reply-To: <20190729221507.48893-1-takondra@cisco.com>
On 7/30/19 6:15 AM, Taras Kondratiuk wrote:
> Commit 2753ca5d9009 ("tipc: fix uninit-value in tipc_nl_compat_doit")
> broke older tipc tools that use compat interface (e.g. tipc-config from
> tipcutils package):
>
> % tipc-config -p
> operation not supported
>
> The commit started to reject TIPC netlink compat messages that do not
> have attributes. It is too restrictive because some of such messages are
> valid (they don't need any arguments):
>
> % grep 'tx none' include/uapi/linux/tipc_config.h
> #define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */
> #define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */
> #define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */
> #define TIPC_CMD_SHOW_PORTS 0x0006 /* tx none, rx ultra_string */
> #define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */
> #define TIPC_CMD_GET_MAX_PORTS 0x4004 /* tx none, rx unsigned */
> #define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */
> #define TIPC_CMD_NOT_NET_ADMIN 0xC001 /* tx none, rx none */
>
> This patch relaxes the original fix and rejects messages without
> arguments only if such arguments are expected by a command (reg_type is
> non zero).
>
> Fixes: 2753ca5d9009 ("tipc: fix uninit-value in tipc_nl_compat_doit")
> Cc: stable@vger.kernel.org
> Signed-off-by: Taras Kondratiuk <takondra@cisco.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
> ---
> The patch is based on v5.3-rc2.
>
> net/tipc/netlink_compat.c | 11 +++++++----
> 1 file changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/net/tipc/netlink_compat.c b/net/tipc/netlink_compat.c
> index d86030ef1232..e135d4e11231 100644
> --- a/net/tipc/netlink_compat.c
> +++ b/net/tipc/netlink_compat.c
> @@ -55,6 +55,7 @@ struct tipc_nl_compat_msg {
> int rep_type;
> int rep_size;
> int req_type;
> + int req_size;
> struct net *net;
> struct sk_buff *rep;
> struct tlv_desc *req;
> @@ -257,7 +258,8 @@ static int tipc_nl_compat_dumpit(struct tipc_nl_compat_cmd_dump *cmd,
> int err;
> struct sk_buff *arg;
>
> - if (msg->req_type && !TLV_CHECK_TYPE(msg->req, msg->req_type))
> + if (msg->req_type && (!msg->req_size ||
> + !TLV_CHECK_TYPE(msg->req, msg->req_type)))
> return -EINVAL;
>
> msg->rep = tipc_tlv_alloc(msg->rep_size);
> @@ -354,7 +356,8 @@ static int tipc_nl_compat_doit(struct tipc_nl_compat_cmd_doit *cmd,
> {
> int err;
>
> - if (msg->req_type && !TLV_CHECK_TYPE(msg->req, msg->req_type))
> + if (msg->req_type && (!msg->req_size ||
> + !TLV_CHECK_TYPE(msg->req, msg->req_type)))
> return -EINVAL;
>
> err = __tipc_nl_compat_doit(cmd, msg);
> @@ -1278,8 +1281,8 @@ static int tipc_nl_compat_recv(struct sk_buff *skb, struct genl_info *info)
> goto send;
> }
>
> - len = nlmsg_attrlen(req_nlh, GENL_HDRLEN + TIPC_GENL_HDRLEN);
> - if (!len || !TLV_OK(msg.req, len)) {
> + msg.req_size = nlmsg_attrlen(req_nlh, GENL_HDRLEN + TIPC_GENL_HDRLEN);
> + if (msg.req_size && !TLV_OK(msg.req, msg.req_size)) {
> msg.rep = tipc_get_err_tlv(TIPC_CFG_NOT_SUPPORTED);
> err = -EOPNOTSUPP;
> goto send;
>
next prev parent reply other threads:[~2019-08-01 13:25 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-29 22:15 [PATCH] tipc: compat: allow tipc commands without arguments Taras Kondratiuk
2019-07-31 22:52 ` David Miller
2019-08-01 13:12 ` Ying Xue [this message]
2019-08-01 22:15 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=605b6a6e-8bdd-c95f-ac00-9dd895fcc6a3@windriver.com \
--to=ying.xue@windriver.com \
--cc=davem@davemloft.net \
--cc=jon.maloy@ericsson.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=takondra@cisco.com \
--cc=tipc-discussion@lists.sourceforge.net \
--cc=xe-linux-external@cisco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).