LKML Archive on
 help / color / Atom feed
* BCM2835 maintainership
@ 2019-11-20 11:38 Stefan Wahren
  2019-11-20 14:11 ` Phil Elwell
                   ` (2 more replies)
  0 siblings, 3 replies; 9+ messages in thread
From: Stefan Wahren @ 2019-11-20 11:38 UTC (permalink / raw)
  To: linux-kernel, linux-rpi-kernel


i need to announce that i step back as BCM2835 maintainer with the end
of this year. Maintainership was a fun ride, but at the end i noticed
that it needed more time for doing it properly than my available spare time.

Nicolas Saenz Julienne is pleased be my successor and i wish him all the
best on his way.

Finally i want to thank all the countless contributors and maintainers
for helping to integrate the Raspberry Pi into the mainline Kernel.


^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, back to index

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-20 11:38 BCM2835 maintainership Stefan Wahren
2019-11-20 14:11 ` Phil Elwell
2019-11-20 20:20 ` Nicolas Saenz Julienne
2019-11-20 21:54 ` Florian Fainelli
2019-11-21  9:56   ` Stefan Wahren
2019-11-21 17:42     ` Florian Fainelli
2019-11-21 17:51       ` Stefan Wahren
2019-11-21 18:03         ` Florian Fainelli
2019-11-21 22:23           ` Eric Anholt

LKML Archive on

Archives are clonable:
	git clone --mirror lkml/git/0.git
	git clone --mirror lkml/git/1.git
	git clone --mirror lkml/git/2.git
	git clone --mirror lkml/git/3.git
	git clone --mirror lkml/git/4.git
	git clone --mirror lkml/git/5.git
	git clone --mirror lkml/git/6.git
	git clone --mirror lkml/git/7.git
	git clone --mirror lkml/git/8.git
	git clone --mirror lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ \
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone