LKML Archive on lore.kernel.org
 help / Atom feed
From: rishabhb@codeaurora.org
To: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	ckadabi@codeaurora.org, tsoni@codeaurora.org,
	Vikram Mulukutla <markivx@codeaurora.org>,
	rjwysocki@gmail.com
Subject: Re: [PATCH] dd: Invoke one probe retry cycle after every initcall level
Date: Wed, 01 Aug 2018 14:18:09 -0700
Message-ID: <68b90830d5024ce75a20b017aaf21c05@codeaurora.org> (raw)
In-Reply-To: <CAJZ5v0ixuWo9RC21Z8zVhuHfkr1uV4vdqMh4s+qGMR7R8Wycag@mail.gmail.com>

On 2018-07-24 01:24, Rafael J. Wysocki wrote:
> On Mon, Jul 23, 2018 at 10:22 PM,  <rishabhb@codeaurora.org> wrote:
>> On 2018-07-23 04:17, Rafael J. Wysocki wrote:
>>> 
>>> On Thu, Jul 19, 2018 at 11:24 PM, Rishabh Bhatnagar
>>> <rishabhb@codeaurora.org> wrote:
>>>> 
>>>> Drivers that are registered at an initcall level may have to
>>>> wait until late_init before the probe deferral mechanism can
>>>> retry their probe functions. It is possible that their
>>>> dependencies were resolved much earlier, in some cases even
>>>> before the next initcall level. Invoke one probe retry cycle
>>>> at every _sync initcall level, allowing these drivers to be
>>>> probed earlier.
>>> 
>>> 
>>> Can you please say something about the actual use case this is
>>> expected to address?
>> 
>> We have a display driver that depends 3 other devices to be
>> probed so that it can bring-up the display. Because of dependencies
>> not being met the deferral mechanism defers the probes for a later 
>> time,
>> even though the dependencies might be met earlier. With this change
>> display can be brought up much earlier.
> 
> OK
> 
> What runlevel brings up the display after the change?
> 
> Thanks,
> Rafael
After the change the display can come up after device_initcall level
itself.
The above mentioned 3 devices are probed at 0.503253, 0.505210 and 
0.523264 secs.
Only the first device is probed successfully. With the current
deferral mechanism the devices get probed again after late_initcall
at 9.19 and 9.35 secs. So display can only come up after 9.35 secs.
With this change the devices are re-probed successfully at 0.60 and
0.613 secs. Therefore display can come just after 0.613 secs.
This change helps in overall android bootup as well.

-Rishabh



  reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-19 21:24 Rishabh Bhatnagar
2018-07-23 11:17 ` Rafael J. Wysocki
2018-07-23 20:22   ` rishabhb
2018-07-24  8:24     ` Rafael J. Wysocki
2018-08-01 21:18       ` rishabhb [this message]
2018-08-01 21:21         ` Rafael J. Wysocki
     [not found]           ` <CA+tyz+6ZwtpKM=G5F2Do_sXWyo8r83ma19fWpn4HELiy0XT7=w@mail.gmail.com>
2018-08-02 22:20             ` Sodagudi Prasad
2018-08-06  8:53               ` Rafael J. Wysocki
2018-08-09 22:30                 ` rishabhb
2018-08-10  7:10                   ` Rafael J. Wysocki
2018-08-10 17:19                     ` Sodagudi Prasad

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=68b90830d5024ce75a20b017aaf21c05@codeaurora.org \
    --to=rishabhb@codeaurora.org \
    --cc=ckadabi@codeaurora.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=markivx@codeaurora.org \
    --cc=rafael@kernel.org \
    --cc=rjwysocki@gmail.com \
    --cc=tsoni@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox