From: Paul Cercueil <paul@crapouillou.net>
To: citral23 <cbranchereau@gmail.com>
Cc: jic23@kernel.org, lars@metafoo.de, linux-mips@vger.kernel.org,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
robh+dt@kernel.org, devicetree@vger.kernel.org,
linux@roeck-us.net, contact@artur-rojek.eu
Subject: Re: [PATCH 5/6] iio/adc: ingenic: modify
Date: Wed, 21 Jul 2021 19:28:18 +0100 [thread overview]
Message-ID: <6ZXLWQ.5R931M3PVWBF2@crapouillou.net> (raw)
In-Reply-To: <20210721105317.36742-6-cbranchereau@gmail.com>
Hi Christophe,
Le mer., juil. 21 2021 at 12:53:16 +0200, citral23
<cbranchereau@gmail.com> a écrit :
> The current code does not allow to set MD to 0 to sample AUX0, fix it
> for the JZ4760(B).
Well, then this should be merged with patch 3, because that means
JZ4760 support does not work without it.
Also, concise commit messages are good, but "modify" is a bit too
concise ;)
Cheers,
-Paul
> Signed-off-by: citral23 <cbranchereau@gmail.com>
> ---
> drivers/iio/adc/ingenic-adc.c | 20 ++++++++++++++++----
> 1 file changed, 16 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/iio/adc/ingenic-adc.c
> b/drivers/iio/adc/ingenic-adc.c
> index 618150475421..1edaae439a32 100644
> --- a/drivers/iio/adc/ingenic-adc.c
> +++ b/drivers/iio/adc/ingenic-adc.c
> @@ -632,7 +632,7 @@ static int ingenic_adc_read_chan_info_raw(struct
> iio_dev *iio_dev,
> struct iio_chan_spec const *chan,
> int *val)
> {
> - int bit, ret, engine = (chan->channel == INGENIC_ADC_BATTERY);
> + int cmd, ret, engine = (chan->channel == INGENIC_ADC_BATTERY);
> struct ingenic_adc *adc = iio_priv(iio_dev);
>
> ret = clk_enable(adc->clk);
> @@ -642,11 +642,22 @@ static int
> ingenic_adc_read_chan_info_raw(struct iio_dev *iio_dev,
> return ret;
> }
>
> - /* We cannot sample AUX/AUX2 in parallel. */
> + /* We cannot sample the aux channels in parallel. */
> mutex_lock(&adc->aux_lock);
> if (adc->soc_data->has_aux_md && engine == 0) {
> - bit = BIT(chan->channel == INGENIC_ADC_AUX2);
> - ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_AUX_MD, bit);
> + switch (chan->channel) {
> + case INGENIC_ADC_AUX0:
> + cmd = 0;
> + break;
> + case INGENIC_ADC_AUX:
> + cmd = 1;
> + break;
> + case INGENIC_ADC_AUX2:
> + cmd = 2;
> + break;
> + }
> +
> + ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_AUX_MD, cmd);
> }
>
> ret = ingenic_adc_capture(adc, engine);
> @@ -654,6 +665,7 @@ static int ingenic_adc_read_chan_info_raw(struct
> iio_dev *iio_dev,
> goto out;
>
> switch (chan->channel) {
> + case INGENIC_ADC_AUX0:
> case INGENIC_ADC_AUX:
> case INGENIC_ADC_AUX2:
> *val = readw(adc->base + JZ_ADC_REG_ADSDAT);
> --
> 2.30.2
>
next prev parent reply other threads:[~2021-07-21 18:28 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-21 10:53 [PATCH] Ingenic: iio/adc: add JZ4760(B) support to the citral23
2021-07-21 10:53 ` [PATCH 1/6] iio/adc: ingenic: rename has_aux2 to has_aux_md citral23
2021-07-21 17:46 ` Paul Cercueil
2021-07-21 10:53 ` [PATCH 2/6] dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry citral23
2021-07-21 17:46 ` Paul Cercueil
2021-07-21 10:53 ` [PATCH 3/6] iio/adc: ingenic: add JZ4760 support to the sadc driver citral23
2021-07-21 18:15 ` Paul Cercueil
2021-07-22 5:09 ` Christophe Branchereau
2021-07-22 5:23 ` Guenter Roeck
2021-07-23 8:58 ` [PATCH V2 0/5] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic " Christophe Branchereau
2021-07-23 8:58 ` [PATCH V2 1/5] iio/adc: ingenic: rename has_aux2 to has_aux_md Christophe Branchereau
2021-07-23 8:58 ` [PATCH V2 2/5] dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry Christophe Branchereau
2021-07-23 8:58 ` [PATCH V2 3/5] iio/adc: ingenic: add JZ4760 support to the sadc driver Christophe Branchereau
2021-07-23 8:58 ` [PATCH V2 4/5] iio/adc: ingenic: add JZ4760B " Christophe Branchereau
2021-07-23 16:15 ` Jonathan Cameron
2021-07-23 8:58 ` [PATCH V2 5/5] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation Christophe Branchereau
2021-07-23 16:16 ` Jonathan Cameron
2021-07-24 7:33 ` Christophe Branchereau
2021-07-24 15:23 ` Jonathan Cameron
2021-07-23 16:03 ` [PATCH V2 0/5] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic sadc driver Jonathan Cameron
2021-07-23 16:13 ` [PATCH 3/6] iio/adc: ingenic: add JZ4760 support to the " Jonathan Cameron
2021-07-21 10:53 ` [PATCH 4/6] iio/adc: ingenic: add JZ4760B " citral23
2021-07-21 18:24 ` Paul Cercueil
2021-07-21 10:53 ` [PATCH 5/6] iio/adc: ingenic: modify citral23
2021-07-21 18:28 ` Paul Cercueil [this message]
2021-07-21 10:53 ` [PATCH 6/6] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation citral23
2021-07-21 19:17 ` Paul Cercueil
2021-07-23 16:10 ` Jonathan Cameron
2021-07-22 2:09 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6ZXLWQ.5R931M3PVWBF2@crapouillou.net \
--to=paul@crapouillou.net \
--cc=cbranchereau@gmail.com \
--cc=contact@artur-rojek.eu \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).