From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753137AbeENQYA (ORCPT ); Mon, 14 May 2018 12:24:00 -0400 Received: from smtprelay.synopsys.com ([198.182.37.59]:38211 "EHLO smtprelay.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752254AbeENQX5 (ORCPT ); Mon, 14 May 2018 12:23:57 -0400 Subject: Re: [PATCH 2/4] PCI: dwc: Add support for EP mode To: Gustavo Pimentel , , , , , , , CC: , , References: From: Joao Pinto Message-ID: <6a0efa0b-a724-4617-439c-f9f876c1db6a@synopsys.com> Date: Mon, 14 May 2018 17:23:48 +0100 User-Agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:52.0) Gecko/20100101 Thunderbird/52.1.1 MIME-Version: 1.0 In-Reply-To: Content-Type: text/plain; charset="utf-8" Content-Language: pt-PT Content-Transfer-Encoding: 8bit X-Originating-IP: [10.107.19.88] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Às 5:17 PM de 5/14/2018, Gustavo Pimentel escreveu: > The PCIe controller dual mode is capable of operating in RC mode as well > as EP mode by configuration option. Till now only RC mode was supported, > with this patch is add EP support to the DesignWare driver. > > Add new property on pci_epc structure which allow to configure > pci_epf_test driver accordingly to the controller specific requirements. > > Signed-off-by: Gustavo Pimentel > Acked-by: Kishon Vijay Abraham I > --- > drivers/pci/dwc/Kconfig | 41 +++++-- > drivers/pci/dwc/pcie-designware-ep.c | 3 + > drivers/pci/dwc/pcie-designware-plat.c | 149 ++++++++++++++++++++++++-- > drivers/pci/endpoint/functions/pci-epf-test.c | 7 ++ > include/linux/pci-epc.h | 8 ++ > 5 files changed, 187 insertions(+), 21 deletions(-) > > diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig > index 2f3f5c5..62f7cdf 100644 > --- a/drivers/pci/dwc/Kconfig > +++ b/drivers/pci/dwc/Kconfig > @@ -7,8 +7,7 @@ config PCIE_DW > > config PCIE_DW_HOST > bool > - depends on PCI > - depends on PCI_MSI_IRQ_DOMAIN > + depends on PCI && PCI_MSI_IRQ_DOMAIN > select PCIE_DW > > config PCIE_DW_EP > @@ -51,17 +50,37 @@ config PCI_DRA7XX_EP > This uses the DesignWare core. > > config PCIE_DW_PLAT > - bool "Platform bus based DesignWare PCIe Controller" > - depends on PCI > - depends on PCI_MSI_IRQ_DOMAIN > - select PCIE_DW_HOST > - ---help--- > - This selects the DesignWare PCIe controller support. Select this if > - you have a PCIe controller on Platform bus. > + bool > > - If you have a controller with this interface, say Y or M here. > +config PCIE_DW_PLAT_HOST > + bool "Platform bus based DesignWare PCIe Controller - Host mode" > + depends on PCI && PCI_MSI_IRQ_DOMAIN > + select PCIE_DW_HOST > + select PCIE_DW_PLAT > + default y > + help > + Enables support for the PCIe controller in the Designware IP to > + work in host mode. There are two instances of PCIe controller in > + Designware IP. > + This controller can work either as EP or RC. In order to enable > + host-specific features PCIE_DW_PLAT_HOST must be selected and in > + order to enable device-specific features PCI_DW_PLAT_EP must be > + selected. > > - If unsure, say N. > +config PCIE_DW_PLAT_EP > + bool "Platform bus based DesignWare PCIe Controller - Endpoint mode" > + depends on PCI && PCI_MSI_IRQ_DOMAIN > + depends on PCI_ENDPOINT > + select PCIE_DW_EP > + select PCIE_DW_PLAT > + help > + Enables support for the PCIe controller in the Designware IP to > + work in endpoint mode. There are two instances of PCIe controller > + in Designware IP. > + This controller can work either as EP or RC. In order to enable > + host-specific features PCIE_DW_PLAT_HOST must be selected and in > + order to enable device-specific features PCI_DW_PLAT_EP must be > + selected. > > config PCI_EXYNOS > bool "Samsung Exynos PCIe controller" > diff --git a/drivers/pci/dwc/pcie-designware-ep.c b/drivers/pci/dwc/pcie-designware-ep.c > index f07678b..2c05a08 100644 > --- a/drivers/pci/dwc/pcie-designware-ep.c > +++ b/drivers/pci/dwc/pcie-designware-ep.c > @@ -411,6 +411,9 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep) > return -ENOMEM; > } > > + epc->features = EPC_FEATURE_NO_LINKUP_NOTIFIER; > + EPC_FEATURE_SET_BAR(epc->features, BAR0); > + > ep->epc = epc; > epc_set_drvdata(epc, ep); > dw_pcie_setup(pci); > diff --git a/drivers/pci/dwc/pcie-designware-plat.c b/drivers/pci/dwc/pcie-designware-plat.c > index 5416aa8..efc315c 100644 > --- a/drivers/pci/dwc/pcie-designware-plat.c > +++ b/drivers/pci/dwc/pcie-designware-plat.c > @@ -12,19 +12,29 @@ > #include > #include > #include > +#include > #include > #include > #include > #include > #include > #include > +#include > > #include "pcie-designware.h" > > struct dw_plat_pcie { > - struct dw_pcie *pci; > + struct dw_pcie *pci; > + struct regmap *regmap; > + enum dw_pcie_device_mode mode; > }; > > +struct dw_plat_pcie_of_data { > + enum dw_pcie_device_mode mode; > +}; > + > +static const struct of_device_id dw_plat_pcie_of_match[]; > + > static int dw_plat_pcie_host_init(struct pcie_port *pp) > { > struct dw_pcie *pci = to_dw_pcie_from_pp(pp); > @@ -42,9 +52,53 @@ static const struct dw_pcie_host_ops dw_plat_pcie_host_ops = { > .host_init = dw_plat_pcie_host_init, > }; > > -static int dw_plat_add_pcie_port(struct pcie_port *pp, > +static int dw_plat_pcie_establish_link(struct dw_pcie *pci) > +{ > + return 0; > +} > + > +static const struct dw_pcie_ops dw_pcie_ops = { > + .start_link = dw_plat_pcie_establish_link, > +}; > + > +static void dw_plat_pcie_ep_init(struct dw_pcie_ep *ep) > +{ > + struct dw_pcie *pci = to_dw_pcie_from_ep(ep); > + enum pci_barno bar; > + > + for (bar = BAR_0; bar <= BAR_5; bar++) > + dw_pcie_ep_reset_bar(pci, bar); > +} > + > +static int dw_plat_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no, > + enum pci_epc_irq_type type, > + u8 interrupt_num) > +{ > + struct dw_pcie *pci = to_dw_pcie_from_ep(ep); > + > + switch (type) { > + case PCI_EPC_IRQ_LEGACY: > + dev_err(pci->dev, "EP cannot trigger legacy IRQs\n"); > + return -EINVAL; > + case PCI_EPC_IRQ_MSI: > + return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num); > + default: > + dev_err(pci->dev, "UNKNOWN IRQ type\n"); > + } > + > + return 0; > +} > + > +static struct dw_pcie_ep_ops pcie_ep_ops = { > + .ep_init = dw_plat_pcie_ep_init, > + .raise_irq = dw_plat_pcie_ep_raise_irq, > +}; > + > +static int dw_plat_add_pcie_port(struct dw_plat_pcie *dw_plat_pcie, > struct platform_device *pdev) > { > + struct dw_pcie *pci = dw_plat_pcie->pci; > + struct pcie_port *pp = &pci->pp; > struct device *dev = &pdev->dev; > int ret; > > @@ -63,15 +117,44 @@ static int dw_plat_add_pcie_port(struct pcie_port *pp, > > ret = dw_pcie_host_init(pp); > if (ret) { > - dev_err(dev, "failed to initialize host\n"); > + dev_err(dev, "Failed to initialize host\n"); > return ret; > } > > return 0; > } > > -static const struct dw_pcie_ops dw_pcie_ops = { > -}; > +static int dw_plat_add_pcie_ep(struct dw_plat_pcie *dw_plat_pcie, > + struct platform_device *pdev) > +{ > + int ret; > + struct dw_pcie_ep *ep; > + struct resource *res; > + struct device *dev = &pdev->dev; > + struct dw_pcie *pci = dw_plat_pcie->pci; > + > + ep = &pci->ep; > + ep->ops = &pcie_ep_ops; > + > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi2"); > + pci->dbi_base2 = devm_ioremap_resource(dev, res); > + if (IS_ERR(pci->dbi_base2)) > + return PTR_ERR(pci->dbi_base2); > + > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space"); > + if (!res) > + return -EINVAL; > + > + ep->phys_base = res->start; > + ep->addr_size = resource_size(res); > + > + ret = dw_pcie_ep_init(ep); > + if (ret) { > + dev_err(dev, "Failed to initialize endpoint\n"); > + return ret; > + } > + return 0; > +} > > static int dw_plat_pcie_probe(struct platform_device *pdev) > { > @@ -80,6 +163,16 @@ static int dw_plat_pcie_probe(struct platform_device *pdev) > struct dw_pcie *pci; > struct resource *res; /* Resource from DT */ > int ret; > + const struct of_device_id *match; > + const struct dw_plat_pcie_of_data *data; > + enum dw_pcie_device_mode mode; > + > + match = of_match_device(dw_plat_pcie_of_match, dev); > + if (!match) > + return -EINVAL; > + > + data = (struct dw_plat_pcie_of_data *)match->data; > + mode = (enum dw_pcie_device_mode)data->mode; > > dw_plat_pcie = devm_kzalloc(dev, sizeof(*dw_plat_pcie), GFP_KERNEL); > if (!dw_plat_pcie) > @@ -93,23 +186,59 @@ static int dw_plat_pcie_probe(struct platform_device *pdev) > pci->ops = &dw_pcie_ops; > > dw_plat_pcie->pci = pci; > + dw_plat_pcie->mode = mode; > + > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi"); > + if (!res) > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > pci->dbi_base = devm_ioremap_resource(dev, res); > if (IS_ERR(pci->dbi_base)) > return PTR_ERR(pci->dbi_base); > > platform_set_drvdata(pdev, dw_plat_pcie); > > - ret = dw_plat_add_pcie_port(&pci->pp, pdev); > - if (ret < 0) > - return ret; > + switch (dw_plat_pcie->mode) { > + case DW_PCIE_RC_TYPE: > + if (!IS_ENABLED(CONFIG_PCIE_DW_PLAT_HOST)) > + return -ENODEV; > + > + ret = dw_plat_add_pcie_port(dw_plat_pcie, pdev); > + if (ret < 0) > + return ret; > + break; > + case DW_PCIE_EP_TYPE: > + if (!IS_ENABLED(CONFIG_PCIE_DW_PLAT_EP)) > + return -ENODEV; > + > + ret = dw_plat_add_pcie_ep(dw_plat_pcie, pdev); > + if (ret < 0) > + return ret; > + break; > + default: > + dev_err(dev, "INVALID device type %d\n", dw_plat_pcie->mode); > + } > > return 0; > } > > +static const struct dw_plat_pcie_of_data dw_plat_pcie_rc_of_data = { > + .mode = DW_PCIE_RC_TYPE, > +}; > + > +static const struct dw_plat_pcie_of_data dw_plat_pcie_ep_of_data = { > + .mode = DW_PCIE_EP_TYPE, > +}; > + > static const struct of_device_id dw_plat_pcie_of_match[] = { > - { .compatible = "snps,dw-pcie", }, > + { > + .compatible = "snps,dw-pcie", > + .data = &dw_plat_pcie_rc_of_data, > + }, > + { > + .compatible = "snps,dw-pcie-ep", > + .data = &dw_plat_pcie_ep_of_data, > + }, > {}, > }; > > diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c > index 7cef851..bee401d 100644 > --- a/drivers/pci/endpoint/functions/pci-epf-test.c > +++ b/drivers/pci/endpoint/functions/pci-epf-test.c > @@ -435,6 +435,13 @@ static int pci_epf_test_bind(struct pci_epf *epf) > if (WARN_ON_ONCE(!epc)) > return -EINVAL; > > + if (epc->features & EPC_FEATURE_NO_LINKUP_NOTIFIER) > + epf_test->linkup_notifier = false; > + else > + epf_test->linkup_notifier = true; > + > + epf_test->test_reg_bar = EPC_FEATURE_GET_BAR(epc->features); > + > ret = pci_epc_write_header(epc, epf->func_no, header); > if (ret) { > dev_err(dev, "configuration header write failed\n"); > diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h > index af657ca..243eaa5 100644 > --- a/include/linux/pci-epc.h > +++ b/include/linux/pci-epc.h > @@ -90,8 +90,16 @@ struct pci_epc { > struct config_group *group; > /* spinlock to protect against concurrent access of EP controller */ > spinlock_t lock; > + unsigned int features; > }; > > +#define EPC_FEATURE_NO_LINKUP_NOTIFIER BIT(0) > +#define EPC_FEATURE_BAR_MASK (BIT(1) | BIT(2) | BIT(3)) > +#define EPC_FEATURE_SET_BAR(features, bar) \ > + (features |= (EPC_FEATURE_BAR_MASK & (bar << 1))) > +#define EPC_FEATURE_GET_BAR(features) \ > + ((features & EPC_FEATURE_BAR_MASK) >> 1) > + > #define to_pci_epc(device) container_of((device), struct pci_epc, dev) > > #define pci_epc_create(dev, ops) \ > Acked-by: Joao Pinto