Re: [PATCH v1 11/11] mtd: new support oops logger based on pstore/blk

[liaoweixiong <liaoweixiong@allwinnertech.com>]

hi Miquel Raynal,

On 2020/2/6 PM 11:45, Miquel Raynal wrote:
> Hi liao,
> 
> liaoweixiong <liaoweixiong@allwinnertech.com> wrote on Thu, 6 Feb 2020
> 21:10:47 +0800:
> 
>> hi Miquel Raynal,
>>
>> On 2020/1/23 AM 1:41, Miquel Raynal wrote:
>>> Hello,
>>>
>>>    
>>>>>>>> +/*
>>>>>>>> + * All zones will be read as pstore/blk will read zone one by one when do
>>>>>>>> + * recover.
>>>>>>>> + */
>>>>>>>> +static ssize_t mtdpstore_read(char *buf, size_t size, loff_t off)
>>>>>>>> +{
>>>>>>>> +	struct mtdpstore_context *cxt = &oops_cxt;
>>>>>>>> +	size_t retlen;
>>>>>>>> +	int ret;
>>>>>>>> +
>>>>>>>> +	if (mtdpstore_block_isbad(cxt, off))
>>>>>>>> +		return -ENEXT;
>>>>>>>> +
>>>>>>>> +	pr_debug("try to read off 0x%llx size %zu\n", off, size);
>>>>>>>> +	ret = mtd_read(cxt->mtd, off, size, &retlen, (u_char *)buf);
>>>>>>>> +	if ((ret < 0 && !mtd_is_bitflip(ret)) || size != retlen)  {
>>>>>>>
>>>>>>> IIRC size != retlen does not mean it failed, but that you should
>>>>>>> continue reading after retlen bytes, no?
>>>>>>>      >>
>>>>>> Yes, you are right. I will fix it. Thanks.
>>>>>>    >>>>> Also, mtd_is_bitflip() does not mean that you are reading a false
>>>>>>> buffer, but that the data has been corrected as it contained bitflips.
>>>>>>> mtd_is_eccerr() however, would be meaningful.
>>>>>>>      >>
>>>>>> Sure I know mtd_is_bitflip() does not mean failure, but I do not think
>>>>>> mtd_is_eccerr() should be here since the codes are ret < 0 and NOT
>>>>>> mtd_is_bitflip().
>>>>>
>>>>> Yes, just drop this check, only keep ret < 0.
>>>>>     >>
>>>> If I don't get it wrong, it should not	 be dropped here. Like your words,
>>>> "mtd_is_bitflip() does not mean that you are reading a false buffer,
>>>> but that the data has been corrected as it contained bitflips.", the
>>>> data I get are valid even if mtd_is_bitflip() return true. It's correct
>>>> data and it's no need to go to handle error. To me, the codes
>>>> should be:
>>>> 	if (ret < 0 && !mit_is_bitflip())
>>>> 		[error handling]
>>>
>>> Please check the implementation of mtd_is_bitflip(). You'll probably
>>> figure out what I am saying.
>>>
>>> https://elixir.bootlin.com/linux/latest/source/include/linux/mtd/mtd.h#L585
>>>    
>>
>> How about the codes as follows:
>>
>> for (done = 0, retlen = 0; done < size; done += retlen) {
>> 	ret = mtd_read(..., &retlen, ...);
>> 	if (!ret)
>> 		continue;
>> 	/*
>> 	 * do nothing if bitflip and ecc error occurs because whether
>> 	 * it's bitflip or ECC error, just a small number of bits flip
>> 	 * and the impact on log data is so small. The mtdpstore just
>> 	 * hands over what it gets and user can judge whether the data
>> 	 * is valid or not.
>> 	 */
>> 	if (mtd_is_bitflip(ret)) {
>> 		dev_warn("bitflip at....");
>> 		continue;

> I don't understand why do you check for bitflips. Bitflips have been
> corrected at this stage, you just get the information that there
> has been bitflips, but the data integrity is fine.
> 

Both of bitflip and eccerror are not real wrong in this
case. So we must check them.

> I am not against ignoring ECC errors in this case though. I would
> propose:
> 
> 	for (...) {
> 		if (ret < 0) {
> 			complain;
> 			return;
> 		}
> 

-117 (-EUCLEAN) means bitflip but be corrected.
-74 (-EBADMSG) means ecc error that uncorrectable
All of them are negative number that smaller than 0. If it just keeps
"ret < 0", it can never make a difference between bitflip/eccerror
and others.

> 		if (mtd_is_eccerr())
> 			complain;
> 	}
> 		
>> 	} else if (mtd_is_eccerr(ret)) {
>> 		dev_warn("eccerr at....");
>> 		retlen = retlen == 0 ? size : retlen;
>> 		continue;
>> 	} else {
>> 		dev_err("read failure at...");
>> 		/* this zone is broken, try next one */
>> 		return -ENEXT;
>> 	}
>> }
>>
> 
> 
> Thanks,
> Miquèl
>