Re: [PATCH 1/7] hwmon: (dell-smm) Allow for specifying fan control method as module parameter

[Armin Wolf <W_Armin@gmx.de>]

Am 15.02.22 um 20:49 schrieb Pali Rohár:
> On Tuesday 15 February 2022 20:44:20 Armin Wolf wrote:
>> Am 15.02.22 um 20:19 schrieb Pali Rohár:
>>> On Tuesday 15 February 2022 20:11:07 Armin Wolf wrote:
>>>> Right now, the only way to test if setting manual/auto fan control works
>>>> is to edit and recompile the module, which may be too cumbersome for
>>>> the average user.
>>> There is also another way suitable for testing purposes which do not
>>> requires any kernel patch. Call iopl(3) syscall which changes I/O
>>> privilege level to 3 and which allows to poke I/O registers.
>>>
>> This is not possible under kernel lockdown/Secure Boot.
> Under Secure Boot it should be still possible.

Afaik, access to iopl() and ioperm() is blocked in this mode too.
This for example causes dell-bios-fan-control to fail when
the machine is booted in Secure Boot mode.

> With kernel lockdown, no kernel testing/debugging at HW level is
> acceptable due to security reasons, as it is against what kernel
> lockdown should achieve.
>
That is the reason i limited the number of selectable code pairs to
two which are known to work on a wide range of machines.
So users are unable to specify SMM commands, which are controlled by
the driver. If this still is to much, then we may drop this patch.

>>>> Allow for specifying the desired fan mode control method when loading
>>>> the module, but taint the kernel if so since there is the possibility
>>>> for strange side effects on non-whitelisted models.
>>>> Also update docs and kernel-parameters.txt accordingly.
>>>>
>>>> Tested on a Dell Inspiron 3505.
>>>>
>>>> Signed-off-by: Armin Wolf <W_Armin@gmx.de>
>>>> ---
>>>>    .../admin-guide/kernel-parameters.txt         |  3 +++
>>>>    Documentation/hwmon/dell-smm-hwmon.rst        | 21 ++++++++++------
>>>>    drivers/hwmon/dell-smm-hwmon.c                | 25 +++++++++++++------
>>>>    3 files changed, 35 insertions(+), 14 deletions(-)
>>>>
>>>> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
>>>> index d68053db21cc..4f1b6c2b7ed1 100644
>>>> --- a/Documentation/admin-guide/kernel-parameters.txt
>>>> +++ b/Documentation/admin-guide/kernel-parameters.txt
>>>> @@ -968,6 +968,9 @@
>>>>    	dell_smm_hwmon.fan_max=
>>>>    			[HW] Maximum configurable fan speed.
>>>>
>>>> +	dell_smm_hwmon.fan_mode_method=
>>>> +			[HW] Method to use for changing fan mode.
>>>> +
>>>>    	dfltcc=		[HW,S390]
>>>>    			Format: { on | off | def_only | inf_only | always }
>>>>    			on:       s390 zlib hardware support for compression on
>>>> diff --git a/Documentation/hwmon/dell-smm-hwmon.rst b/Documentation/hwmon/dell-smm-hwmon.rst
>>>> index beec88491171..564d99cda869 100644
>>>> --- a/Documentation/hwmon/dell-smm-hwmon.rst
>>>> +++ b/Documentation/hwmon/dell-smm-hwmon.rst
>>>> @@ -67,13 +67,16 @@ for your hardware. It is possible that codes that work for other
>>>>    laptops actually work for yours as well, or that you have to discover
>>>>    new codes.
>>>>
>>>> -Check the list ``i8k_whitelist_fan_control`` in file
>>>> -``drivers/hwmon/dell-smm-hwmon.c`` in the kernel tree: as a first
>>>> -attempt you can try to add your machine and use an already-known code
>>>> -pair. If, after recompiling the kernel, you see that ``pwm1_enable``
>>>> -is present and works (i.e., you can manually control the fan speed),
>>>> -then please submit your finding as a kernel patch, so that other users
>>>> -can benefit from it. Please see
>>>> +As a first step, you can load the module with the module parameter
>>>> +``fan_mode_method`` set to 1 to test if your hardware works with
>>>> +an already know method for disabling automatic BIOS fan control.
>>>> +If ``pwm1_enable`` is now present and works (i.e., you can
>>>> +manually control the fan speed), then please submit your finding
>>>> +as a kernel patch, so that other users can benefit from it.
>>>> +Just add your model to the list ``i8k_whitelist_fan_control`` in
>>>> +file ``drivers/hwmon/dell-smm-hwmon.c`` in the kernel tree and use
>>>> +the already known code pair.
>>>> +Please read
>>>>    :ref:`Documentation/process/submitting-patches.rst <submittingpatches>`
>>>>    for information on submitting patches.
>>>>
>>>> @@ -120,6 +123,10 @@ Module parameters
>>>>                       Maximum configurable fan speed. (default:
>>>>                       autodetect)
>>>>
>>>> +* fan_mode_method:uint
>>>> +                   Method to use for changing fan mode (default:
>>>> +                   from whitelist)
>>>> +
>>>>    Legacy ``/proc`` interface
>>>>    --------------------------
>>>>
>>>> diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
>>>> index 9949eeb79378..1c4cc516c8b2 100644
>>>> --- a/drivers/hwmon/dell-smm-hwmon.c
>>>> +++ b/drivers/hwmon/dell-smm-hwmon.c
>>>> @@ -111,6 +111,10 @@ static uint fan_max;
>>>>    module_param(fan_max, uint, 0);
>>>>    MODULE_PARM_DESC(fan_max, "Maximum configurable fan speed (default: autodetect)");
>>>>
>>>> +static uint fan_mode_method;
>>>> +module_param_unsafe(fan_mode_method, uint, 0);
>>>> +MODULE_PARM_DESC(fan_mode_method, "Method to use for changing fan mode (default: from whitelist)");
>>> No, please really do not introduce another kernel parameter for this
>>> driver. There are already many and we do not need to extend this list.

Since there are two code pairs, i could not reuse the force param for that.
Since the newly added pair is unused, should i remove it and reuse the
force param?

>>>> +
>>>>    struct smm_regs {
>>>>    	unsigned int eax;
>>>>    	unsigned int ebx;
>>>> @@ -677,7 +681,7 @@ static umode_t dell_smm_is_visible(const void *drvdata, enum hwmon_sensor_types
>>>>
>>>>    			break;
>>>>    		case hwmon_pwm_enable:
>>>> -			if (data->auto_fan)
>>>> +			if (data->auto_fan && data->manual_fan)
>>>>    				/*
>>>>    				 * There is no command for retrieve the current status
>>>>    				 * from BIOS, and userspace/firmware itself can change
>>>> @@ -1282,14 +1286,21 @@ static int __init dell_smm_probe(struct platform_device *pdev)
>>>>    	data->i8k_fan_max = fan_max ? : I8K_FAN_HIGH;	/* Must not be 0 */
>>>>    	data->i8k_pwm_mult = DIV_ROUND_UP(255, data->i8k_fan_max);
>>>>
>>>> -	fan_control = dmi_first_match(i8k_whitelist_fan_control);
>>>> -	if (fan_control && fan_control->driver_data) {
>>>> -		const struct i8k_fan_control_data *control = fan_control->driver_data;
>>>> +	/* value specified via module param overrides whitelist */
>>>> +	if (fan_mode_method > 0 && fan_mode_method <= ARRAY_SIZE(i8k_fan_control_data)) {
>>>> +		data->manual_fan = i8k_fan_control_data[fan_mode_method - 1].manual_fan;
>>>> +		data->auto_fan = i8k_fan_control_data[fan_mode_method - 1].auto_fan;
>>>> +	} else {
>>>> +		fan_control = dmi_first_match(i8k_whitelist_fan_control);
>>>> +		if (fan_control && fan_control->driver_data) {
>>>> +			const struct i8k_fan_control_data *control = fan_control->driver_data;
>>>>
>>>> -		data->manual_fan = control->manual_fan;
>>>> -		data->auto_fan = control->auto_fan;
>>>> -		dev_info(&pdev->dev, "enabling support for setting automatic/manual fan control\n");
>>>> +			data->manual_fan = control->manual_fan;
>>>> +			data->auto_fan = control->auto_fan;
>>>> +		}
>>>>    	}
>>>> +	if (data->manual_fan && data->auto_fan)
>>>> +		dev_info(&pdev->dev, "enabling support for setting automatic/manual fan control\n");
>>>>
>>>>    	if (!fan_mult) {
>>>>    		/*
>>>> --
>>>> 2.30.2
>>>>