[PATCH] arm64: dts: qcom: msm8996: Add blsp2_i2c3

[PATCH] arm64: dts: qcom: msm8996: Add blsp2_i2c3

[Yassine Oudjana]

Add a node for blsp2_i2c3 which is used for type-C port control chips
and speaker codecs on some devices.
   
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 32 +++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 044db4ad2f3e..0cde4b7f863e 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1340,6 +1340,20 @@ blsp2_uart3_4pins_sleep: blsp2-uart2-4pins-sleep {
 				bias-disable;
 			};
 
+			blsp2_i2c3_default: blsp2-i2c3 {
+				pins = "gpio51", "gpio52";
+				function = "blsp_i2c9";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp2_i2c3_sleep: blsp2-i2c3-sleep {
+				pins = "gpio51", "gpio52";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			wcd_intr_default: wcd-intr-default{
 				pins = "gpio54";
 				function = "gpio";
@@ -3023,6 +3037,24 @@ blsp2_i2c2: i2c@75b6000 {
 			status = "disabled";
 		};
 
+		blsp2_i2c3: i2c@75b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x075b7000 0x1000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+				<&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <400000>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c3_default>;
+			pinctrl-1 = <&blsp2_i2c3_sleep>;
+			dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		blsp2_i2c5: i2c@75b9000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x75b9000 0x1000>;
-- 
2.32.0