On 17.07.22 23:54, Thomas Gleixner wrote:
> On Sun, Jul 17 2022 at 22:13, Thomas Gleixner wrote:
>> On Sun, Jul 17 2022 at 22:08, Thomas Gleixner wrote:
>>> On Sun, Jul 17 2022 at 21:08, Thomas Gleixner wrote:
>>> loadsegment_simple() was a red herring. The gs segment is already zero.
>>>
>>> So what explodes here is the early boot when switching from early per
>>> CPU to the real per CPU area.
>>>
>>> start_kernel()
>>>          .....
>>>          setup_per_cpu_areas();
>>>          smp_prepare_boot_cpu()
>>
>> Bah. switch_to_new_gdt() is already invoked from setup_per_cpu_areas()
>> and then again in smp_prepare_boot_cpu() and once more in cpu_init(),
>>
>> What a mess.
> 
> So the below builds and boots at least on 64bit. I'll stare at it some
> more tomorrow. I have no idea whether native_load_gdt() works with
> XEN_PV. It should, but what do I know.

No, shouldn't work. But ...

> 
> Thanks,
> 
>          tglx
> ---
> --- a/arch/x86/include/asm/desc.h
> +++ b/arch/x86/include/asm/desc.h
> @@ -205,7 +205,7 @@ static inline void native_set_ldt(const
>   	}
>   }
>   
> -static inline void native_load_gdt(const struct desc_ptr *dtr)
> +static __always_inline void native_load_gdt(const struct desc_ptr *dtr)
>   {
>   	asm volatile("lgdt %0"::"m" (*dtr));
>   }
> --- a/arch/x86/include/asm/processor.h
> +++ b/arch/x86/include/asm/processor.h
> @@ -670,10 +670,9 @@ extern int sysenter_setup(void);
>   /* Defined in head.S */
>   extern struct desc_ptr		early_gdt_descr;
>   
> -extern void switch_to_new_gdt(int);
> +extern void switch_to_real_gdt(int);
>   extern void load_direct_gdt(int);
>   extern void load_fixmap_gdt(int);
> -extern void load_percpu_segment(int);
>   extern void cpu_init(void);
>   extern void cpu_init_secondary(void);
>   extern void cpu_init_exception_handling(void);
> --- a/arch/x86/kernel/cpu/Makefile
> +++ b/arch/x86/kernel/cpu/Makefile
> @@ -7,20 +7,24 @@
>   ifdef CONFIG_FUNCTION_TRACER
>   CFLAGS_REMOVE_common.o = -pg
>   CFLAGS_REMOVE_perf_event.o = -pg
> +CFLAGS_REMOVE_switch_gdt.o = -pg
>   endif
>   
>   # If these files are instrumented, boot hangs during the first second.
>   KCOV_INSTRUMENT_common.o := n
>   KCOV_INSTRUMENT_perf_event.o := n
> +KCOV_INSTRUMENT_switch_gdt.o := n
>   
>   # As above, instrumenting secondary CPU boot code causes boot hangs.
>   KCSAN_SANITIZE_common.o := n
> +KCSAN_SANITIZE_switch_gdt.o := n
>   
> -# Make sure load_percpu_segment has no stackprotector
> -CFLAGS_common.o		:= -fno-stack-protector
> +# Make sure that switching the GDT and the per CPU segment
> +# does not have stack protector enabled.
> +CFLAGS_switch_gdt.o	:= -fno-stack-protector
>   
>   obj-y			:= cacheinfo.o scattered.o topology.o
> -obj-y			+= common.o
> +obj-y			+= common.o switch_gdt.o
>   obj-y			+= rdrand.o
>   obj-y			+= match.o
>   obj-y			+= bugs.o
> --- a/arch/x86/kernel/cpu/common.c
> +++ b/arch/x86/kernel/cpu/common.c
> @@ -701,16 +701,6 @@ static const char *table_lookup_model(st
>   __u32 cpu_caps_cleared[NCAPINTS + NBUGINTS] __aligned(sizeof(unsigned long));
>   __u32 cpu_caps_set[NCAPINTS + NBUGINTS] __aligned(sizeof(unsigned long));
>   
> -void load_percpu_segment(int cpu)
> -{
> -#ifdef CONFIG_X86_32
> -	loadsegment(fs, __KERNEL_PERCPU);
> -#else
> -	__loadsegment_simple(gs, 0);
> -	wrmsrl(MSR_GS_BASE, cpu_kernelmode_gs_base(cpu));
> -#endif
> -}
> -
>   #ifdef CONFIG_X86_32
>   /* The 32-bit entry code needs to find cpu_entry_area. */
>   DEFINE_PER_CPU(struct cpu_entry_area *, cpu_entry_area);
> @@ -738,18 +728,6 @@ void load_fixmap_gdt(int cpu)
>   }
>   EXPORT_SYMBOL_GPL(load_fixmap_gdt);
>   
> -/*
> - * Current gdt points %fs at the "master" per-cpu area: after this,
> - * it's on the real one.
> - */
> -void switch_to_new_gdt(int cpu)
> -{
> -	/* Load the original GDT */
> -	load_direct_gdt(cpu);
> -	/* Reload the per-cpu base */
> -	load_percpu_segment(cpu);
> -}
> -
>   static const struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {};
>   
>   static void get_model_name(struct cpuinfo_x86 *c)
> @@ -2228,12 +2206,6 @@ void cpu_init(void)
>   	    boot_cpu_has(X86_FEATURE_TSC) || boot_cpu_has(X86_FEATURE_DE))
>   		cr4_clear_bits(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
>   
> -	/*
> -	 * Initialize the per-CPU GDT with the boot GDT,
> -	 * and set up the GDT descriptor:
> -	 */
> -	switch_to_new_gdt(cpu);
> -
>   	if (IS_ENABLED(CONFIG_X86_64)) {
>   		loadsegment(fs, 0);
>   		memset(cur->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8);
> --- /dev/null
> +++ b/arch/x86/kernel/cpu/switch_gdt.c
> @@ -0,0 +1,31 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +#include <asm/processor.h>
> +#include <asm/segment.h>
> +#include <asm/desc.h>
> +
> +/*
> + * Invoked during early boot to switch from early GDT and early per CPU
> + * (%fs on 32bit, GS_BASE on 64bit) to the real GDT and the runtime per CPU
> + * area.
> + *
> + * This has to be done atomic because after switching from early GDT to
> + * the real one any per cpu variable access is going to fault because
> + * %fs resp. GS_BASE is not yet pointing to the real per CPU data.
> + *
> + * As a consequence this uses the native variants of load_gdt() and
> + * wrmsrl(). So XEN_PV has to take the fault and emulate.
> + */
> +void __init switch_to_real_gdt(int cpu)
> +{
> +	struct desc_ptr gdt_descr;
> +
> +	gdt_descr.address = (long)get_cpu_gdt_rw(cpu);
> +	gdt_descr.size = GDT_SIZE - 1;
> +	native_load_gdt(&gdt_descr);
> +
> +#ifdef CONFIG_X86_32
> +	loadsegment(fs, __KERNEL_PERCPU);
> +#else
> +	native_wrmsrl(MSR_GS_BASE, cpu_kernelmode_gs_base(cpu));
> +#endif
> +}
> --- a/arch/x86/kernel/setup_percpu.c
> +++ b/arch/x86/kernel/setup_percpu.c
> @@ -211,7 +211,7 @@ void __init setup_per_cpu_areas(void)
>   		 * area.  Reload any changed state for the boot CPU.
>   		 */
>   		if (!cpu)
> -			switch_to_new_gdt(cpu);
> +			switch_to_real_gdt(cpu);
>   	}
>   
>   	/* indicate the early static arrays will soon be gone */
> --- a/arch/x86/kernel/smpboot.c
> +++ b/arch/x86/kernel/smpboot.c
> @@ -1457,7 +1457,11 @@ void arch_thaw_secondary_cpus_end(void)
>   void __init native_smp_prepare_boot_cpu(void)
>   {
>   	int me = smp_processor_id();
> -	switch_to_new_gdt(me);
> +
> +	/* SMP invokes this from setup_per_cpu_areas() */
> +	if (!IS_ENABLED(CONFIG_SMP))
> +		switch_to_real_gdt(me);
> +
>   	/* already set me in cpu_online_mask in boot_cpu_init() */
>   	cpumask_set_cpu(me, cpu_callout_mask);
>   	cpu_set_state_online(me);
> --- a/arch/x86/xen/enlighten_pv.c
> +++ b/arch/x86/xen/enlighten_pv.c
> @@ -1164,7 +1164,7 @@ static void __init xen_setup_gdt(int cpu
>   	pv_ops.cpu.write_gdt_entry = xen_write_gdt_entry_boot;
>   	pv_ops.cpu.load_gdt = xen_load_gdt_boot;
>   
> -	switch_to_new_gdt(cpu);
> +	switch_to_real_gdt(cpu);

... can't you use the paravirt variant of load_gdt in switch_to_real_gdt() ?

>   
>   	pv_ops.cpu.write_gdt_entry = xen_write_gdt_entry;
>   	pv_ops.cpu.load_gdt = xen_load_gdt;
> 

Juergen