Re: [PATCH INTERNAL 2/3] PCI: iproc: Fix up corrupted PAXC root complex config registers

[Ray Jui <ray.jui@broadcom.com>]

Hi Bjorn,

On 5/30/2018 10:27 AM, Bjorn Helgaas wrote:
> On Thu, May 17, 2018 at 10:21:31AM -0700, Ray Jui wrote:
>> On certain versions of Broadcom PAXC based root complexes, certain
>> regions of the configuration space are corrupted. As a result, it
>> prevents the Linux PCIe stack from traversing the linked list of the
>> capability registers completely and therefore the root complex is
>> not advertised as "PCIe capable". This prevents the correct PCIe RID
>> from being parsed in the kernel PCIe stack. A correct RID is required
>> for mapping to a stream ID from the SMMU or the device ID from the
>> GICv3 ITS
>>
>> This patch fixes up the issue by manually populating the related
>> PCIe capabilities based on readings from the PCIe capability structure
>>
>> Signed-off-by: Ray Jui <rjui@broadcom.com>
>> Reviewed-by: Anup Patel <anup.patel@broadcom.com>
>> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
>> ---
>>   drivers/pci/quirks.c | 95 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>>   1 file changed, 95 insertions(+)
>>
>> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
>> index 47dfea0..0cdbd0a 100644
>> --- a/drivers/pci/quirks.c
>> +++ b/drivers/pci/quirks.c
>> @@ -2198,6 +2198,101 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0, quirk_paxc_bridge);
>>   DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd750, quirk_paxc_bridge);
>>   DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802, quirk_paxc_bridge);
>>   DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804, quirk_paxc_bridge);
>> +
>> +/*
>> + * The PCI capabilities list for certain revisions of Broadcom PAXC root
>> + * complexes is incorrectly terminated due to corrupted configuration space
>> + * registers in the range of 0x50 - 0x5f
>> + *
>> + * As a result, the capability list becomes broken and prevent standard PCI
>> + * stack from being able to traverse to the PCIe capability structure
>> + */
>> +static void quirk_paxc_pcie_capability(struct pci_dev *pdev)
>> +{
>> +	int pos, i = 0;
>> +	u8 next_cap;
>> +	u16 reg16, *cap;
>> +	struct pci_cap_saved_state *state;
>> +
>> +	/* bail out if PCIe capability can be found */
>> +	if (pdev->pcie_cap || pci_find_capability(pdev, PCI_CAP_ID_EXP))
>> +		return;
>> +
>> +	/* locate the power management capability */
>> +	pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
>> +	if (!pos)
>> +		return;
>> +
>> +	/* bail out if the next capability pointer is not 0x50/0x58 */
>> +	pci_read_config_byte(pdev, pos + 1, &next_cap);
>> +	if (next_cap != 0x50 && next_cap != 0x58)
>> +		return;
>> +
>> +	/* bail out if we do not terminate at 0x50/0x58 */
>> +	pos = next_cap;
>> +	pci_read_config_byte(pdev, pos + 1, &next_cap);
>> +	if (next_cap != 0x00)
>> +		return;
>> +
>> +	/*
>> +	 * On these buggy HW, PCIe capability structure is expected to be at
>> +	 * 0xac and should terminate the list
>> +	 *
>> +	 * Borrow the similar logic from theIntel DH895xCC VFs fixup to save
>> +	 * the PCIe capability list
>> +	 */
>> +	pos = 0xac;
>> +	pci_read_config_word(pdev, pos, &reg16);
>> +	if (reg16 == (0x0000 | PCI_CAP_ID_EXP)) {
>> +		u32 status;
>> +
>> +#ifndef PCI_EXP_SAVE_REGS
>> +#define PCI_EXP_SAVE_REGS     7
>> +#endif
>> +		int size = PCI_EXP_SAVE_REGS * sizeof(u16);
>> +
>> +		pdev->pcie_cap = pos;
>> +		pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, &reg16);
>> +		pdev->pcie_flags_reg = reg16;
>> +		pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, &reg16);
>> +		pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD;
> 
> Is there any way you can fix this in iproc_pcie_config_read() instead,
> by making it notice when we're reading a corrupted part of config
> space, and then returning the correct data instead?  Is it just the
> next capability pointer that's corrupted?

Let me look into that and I'll get back.

Thanks,

Ray

> 
> If you could fix it in the config accessor, lspci would automatically
> show all the correct data (I think lspci will still show the wrong
> data with this patch).
> 
> The quirk seems like a maintenance issue because anything that calls
> 
>    pci_find_capability(pdev, PCI_CAP_ID_EXP)
> 
> will get the wrong answer.
> 
>> +
>> +		pdev->cfg_size = PCI_CFG_SPACE_EXP_SIZE;
>> +		if (pci_read_config_dword(pdev, PCI_CFG_SPACE_SIZE, &status) !=
>> +		    PCIBIOS_SUCCESSFUL || (status == 0xffffffff))
>> +			pdev->cfg_size = PCI_CFG_SPACE_SIZE;
>> +
>> +		if (pci_find_saved_cap(pdev, PCI_CAP_ID_EXP))
>> +			return;
>> +
>> +		state = kzalloc(sizeof(*state) + size, GFP_KERNEL);
>> +		if (!state)
>> +			return;
>> +
>> +		state->cap.cap_nr = PCI_CAP_ID_EXP;
>> +		state->cap.cap_extended = 0;
>> +		state->cap.size = size;
>> +		cap = (u16 *)&state->cap.data[0];
>> +		pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &cap[i++]);
>> +		pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &cap[i++]);
>> +		pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &cap[i++]);
>> +		pcie_capability_read_word(pdev, PCI_EXP_RTCTL,  &cap[i++]);
>> +		pcie_capability_read_word(pdev, PCI_EXP_DEVCTL2, &cap[i++]);
>> +		pcie_capability_read_word(pdev, PCI_EXP_LNKCTL2, &cap[i++]);
>> +		pcie_capability_read_word(pdev, PCI_EXP_SLTCTL2, &cap[i++]);
>> +		hlist_add_head(&state->next, &pdev->saved_cap_space);
>> +	}
>> +}
>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_57810,
>> +			quirk_paxc_pcie_capability);
>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16cd,
>> +			quirk_paxc_pcie_capability);
>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0,
>> +			quirk_paxc_pcie_capability);
>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802,
>> +			quirk_paxc_pcie_capability);
>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804,
>> +			quirk_paxc_pcie_capability);
>>   #endif
>>   
>>   /* Originally in EDAC sources for i82875P:
>> -- 
>> 2.1.4
>>