From: Hans Verkuil <hverkuil@xs4all.nl>
To: Stanimir Varbanov <stanimir.varbanov@linaro.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Andy Gross <andy.gross@linaro.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Stephen Boyd <sboyd@codeaurora.org>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH v2 0/8] Qualcomm video decoder/encoder driver
Date: Wed, 7 Sep 2016 13:45:47 +0200 [thread overview]
Message-ID: <71b8784a-1579-c512-470f-7deccb874556@xs4all.nl> (raw)
In-Reply-To: <1473248229-5540-1-git-send-email-stanimir.varbanov@linaro.org>
One thing you need to add is a patch for the MAINTAINERS file. It needs
an entry for this new driver.
I think pretty much all new drivers I've reviewed recently forgot to update
that file :-(
Regards,
Hans
On 09/07/16 13:37, Stanimir Varbanov wrote:
> Changes since v1:
> - s/ENOTSUPP/EINVAL in vidc_set_color_format()
> - use video_device_alloc
> - fill struct device pointer in vb2_queue_init instead of .setup_queue
> - fill device_caps in struct video_device instead of .vidioc_querycap
> - fill colorspace, ycbcr_enc, quantization and xfer_func only when type
> is V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE
> - delete rproc_boot|shutdown wrappers in core.c
> - delete unused list_head in struct vidc_core
> - delete mem.c|h and inline the function where they were used
> - delete int_bufs.c|h files and move the functions in helpers.c, also
> cleanup the code by removing buffer reuse mechanism
> - inline INIT_VIDC_LIST macro
> - rename queue to other_queue in .start_streaming for encoder and
> decoder
> - renamed vidc_buf_descs -> vidc_get_bufreq
> - optimize instance checks in vidc_open
> - moved resources structure in core.c and delete resources.c|h
> - delete streamon and streamoff flags
>
> The previous v1 can be found at [1].
>
> [1] https://lkml.org/lkml/2016/8/22/308
>
> The output of v4l2-compliance for decoder and encoder are:
>
> root@dragonboard-410c:/home/linaro# ./v4l2-compliance -d /dev/video0
> v4l2-compliance SHA : abc1453dfe89f244dccd3460d8e1a2e3091cbadb
>
> Driver Info:
> Driver name : vidc
> Card type : video decoder
> Bus info : platform:vidc
> Driver version: 4.8.0
> Capabilities : 0x84204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
>
> Compliance test for device /dev/video0 (not using libv4l2):
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second video open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 7 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test VIDIOC_EXPBUF: OK
>
> Test input 0:
>
>
> Total: 43, Succeeded: 43, Failed: 0, Warnings: 0
>
>
> root@dragonboard-410c:/home/linaro# ./v4l2-compliance -d /dev/video1
> v4l2-compliance SHA : abc1453dfe89f244dccd3460d8e1a2e3091cbadb
>
> Driver Info:
> Driver name : vidc
> Card type : video encoder
> Bus info : platform:vidc
> Driver version: 4.8.0
> Capabilities : 0x84204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
>
> Compliance test for device /dev/video1 (not using libv4l2):
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second video open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 32 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK
> test Composing: OK (Not Supported)
> test Scaling: OK
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test VIDIOC_EXPBUF: OK
>
> Test input 0:
>
>
> Total: 43, Succeeded: 43, Failed: 0, Warnings: 0
>
>
> Stanimir Varbanov (8):
> doc: DT: vidc: binding document for Qualcomm video driver
> media: vidc: adding core part and helper functions
> media: vidc: decoder: add video decoder files
> media: vidc: encoder: add video encoder files
> media: vidc: add Host Firmware Interface (HFI)
> media: vidc: add Venus HFI files
> media: vidc: add Makefiles and Kconfig files
> media: vidc: enable building of the video codec driver
>
> .../devicetree/bindings/media/qcom,vidc.txt | 61 +
> drivers/media/platform/Kconfig | 1 +
> drivers/media/platform/Makefile | 1 +
> drivers/media/platform/qcom/Kconfig | 8 +
> drivers/media/platform/qcom/Makefile | 6 +
> drivers/media/platform/qcom/vidc/Makefile | 15 +
> drivers/media/platform/qcom/vidc/core.c | 559 +++++++
> drivers/media/platform/qcom/vidc/core.h | 207 +++
> drivers/media/platform/qcom/vidc/helpers.c | 604 ++++++++
> drivers/media/platform/qcom/vidc/helpers.h | 43 +
> drivers/media/platform/qcom/vidc/hfi.c | 617 ++++++++
> drivers/media/platform/qcom/vidc/hfi.h | 272 ++++
> drivers/media/platform/qcom/vidc/hfi_cmds.c | 1261 ++++++++++++++++
> drivers/media/platform/qcom/vidc/hfi_cmds.h | 338 +++++
> drivers/media/platform/qcom/vidc/hfi_helper.h | 1143 +++++++++++++++
> drivers/media/platform/qcom/vidc/hfi_msgs.c | 1072 ++++++++++++++
> drivers/media/platform/qcom/vidc/hfi_msgs.h | 298 ++++
> drivers/media/platform/qcom/vidc/hfi_venus.c | 1534 ++++++++++++++++++++
> drivers/media/platform/qcom/vidc/hfi_venus.h | 25 +
> drivers/media/platform/qcom/vidc/hfi_venus_io.h | 98 ++
> drivers/media/platform/qcom/vidc/vdec.c | 1091 ++++++++++++++
> drivers/media/platform/qcom/vidc/vdec.h | 29 +
> drivers/media/platform/qcom/vidc/vdec_ctrls.c | 200 +++
> drivers/media/platform/qcom/vidc/vdec_ctrls.h | 21 +
> drivers/media/platform/qcom/vidc/venc.c | 1252 ++++++++++++++++
> drivers/media/platform/qcom/vidc/venc.h | 29 +
> drivers/media/platform/qcom/vidc/venc_ctrls.c | 396 +++++
> drivers/media/platform/qcom/vidc/venc_ctrls.h | 23 +
> 28 files changed, 11204 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/qcom,vidc.txt
> create mode 100644 drivers/media/platform/qcom/Kconfig
> create mode 100644 drivers/media/platform/qcom/Makefile
> create mode 100644 drivers/media/platform/qcom/vidc/Makefile
> create mode 100644 drivers/media/platform/qcom/vidc/core.c
> create mode 100644 drivers/media/platform/qcom/vidc/core.h
> create mode 100644 drivers/media/platform/qcom/vidc/helpers.c
> create mode 100644 drivers/media/platform/qcom/vidc/helpers.h
> create mode 100644 drivers/media/platform/qcom/vidc/hfi.c
> create mode 100644 drivers/media/platform/qcom/vidc/hfi.h
> create mode 100644 drivers/media/platform/qcom/vidc/hfi_cmds.c
> create mode 100644 drivers/media/platform/qcom/vidc/hfi_cmds.h
> create mode 100644 drivers/media/platform/qcom/vidc/hfi_helper.h
> create mode 100644 drivers/media/platform/qcom/vidc/hfi_msgs.c
> create mode 100644 drivers/media/platform/qcom/vidc/hfi_msgs.h
> create mode 100644 drivers/media/platform/qcom/vidc/hfi_venus.c
> create mode 100644 drivers/media/platform/qcom/vidc/hfi_venus.h
> create mode 100644 drivers/media/platform/qcom/vidc/hfi_venus_io.h
> create mode 100644 drivers/media/platform/qcom/vidc/vdec.c
> create mode 100644 drivers/media/platform/qcom/vidc/vdec.h
> create mode 100644 drivers/media/platform/qcom/vidc/vdec_ctrls.c
> create mode 100644 drivers/media/platform/qcom/vidc/vdec_ctrls.h
> create mode 100644 drivers/media/platform/qcom/vidc/venc.c
> create mode 100644 drivers/media/platform/qcom/vidc/venc.h
> create mode 100644 drivers/media/platform/qcom/vidc/venc_ctrls.c
> create mode 100644 drivers/media/platform/qcom/vidc/venc_ctrls.h
>
next prev parent reply other threads:[~2016-09-07 11:46 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-07 11:37 [PATCH v2 0/8] Qualcomm video decoder/encoder driver Stanimir Varbanov
2016-09-07 11:37 ` [PATCH v2 1/8] doc: DT: vidc: binding document for Qualcomm video driver Stanimir Varbanov
2016-09-16 14:19 ` Rob Herring
2016-09-26 19:42 ` Stanimir Varbanov
2016-09-07 11:37 ` [PATCH v2 2/8] media: vidc: adding core part and helper functions Stanimir Varbanov
2016-09-07 11:37 ` [PATCH v2 3/8] media: vidc: decoder: add video decoder files Stanimir Varbanov
2016-09-19 10:04 ` Hans Verkuil
2016-09-29 0:48 ` Stanimir Varbanov
2016-11-03 10:45 ` Stanimir Varbanov
2016-11-03 10:55 ` Hans Verkuil
2016-11-03 12:49 ` Stanimir Varbanov
2016-09-19 10:12 ` Hans Verkuil
2016-09-29 0:49 ` Stanimir Varbanov
2016-09-07 11:37 ` [PATCH v2 4/8] media: vidc: encoder: add video encoder files Stanimir Varbanov
2016-09-19 10:15 ` Hans Verkuil
2016-09-29 0:53 ` Stanimir Varbanov
2016-09-07 11:37 ` [PATCH v2 5/8] media: vidc: add Host Firmware Interface (HFI) Stanimir Varbanov
2016-09-07 11:37 ` [PATCH v2 6/8] media: vidc: add Venus HFI files Stanimir Varbanov
2016-09-07 11:37 ` [PATCH v2 7/8] media: vidc: add Makefiles and Kconfig files Stanimir Varbanov
2016-09-19 10:35 ` Hans Verkuil
2016-09-29 0:55 ` Stanimir Varbanov
2016-09-07 11:37 ` [PATCH v2 8/8] media: vidc: enable building of the video codec driver Stanimir Varbanov
2016-09-07 11:45 ` Hans Verkuil [this message]
2016-09-19 10:43 ` [PATCH v2 0/8] Qualcomm video decoder/encoder driver Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=71b8784a-1579-c512-470f-7deccb874556@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=stanimir.varbanov@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).