LKML Archive on lore.kernel.org
 help / Atom feed
From: Sibi S <sibis@codeaurora.org>
To: Philipp Zabel <p.zabel@pengutronix.de>,
	bjorn.andersson@linaro.org, robh+dt@kernel.org
Cc: linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, ohad@wizery.com,
	mark.rutland@arm.com, sricharan@codeaurora.org,
	akdwived@codeaurora.org, linux-arm-msm@vger.kernel.org,
	tsoni@codeaurora.org
Subject: Re: [PATCH 2/4] reset: qcom: PDC (Power Domain Controller) reset controller
Date: Tue, 31 Jul 2018 18:30:38 +0530
Message-ID: <72f17bfc-9b19-7cfa-2aa7-8d45cd1ed39e@codeaurora.org> (raw)
In-Reply-To: <1533027087.3444.7.camel@pengutronix.de>

Hi Philipp,
Thanks for the review!

On 07/31/2018 02:21 PM, Philipp Zabel wrote:
> On Fri, 2018-07-27 at 20:58 +0530, Sibi Sankar wrote:
>> Add reset controller for SDM845 SoC to control reset signals
>> provided by PDC for Modem, Compute, Display, GPU, Debug, AOP,
>> Sensors, Audio, SP and APPS
>>
>> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
>> ---
>>   drivers/reset/Kconfig          |   9 +++
>>   drivers/reset/Makefile         |   1 +
>>   drivers/reset/reset-qcom-pdc.c | 139 +++++++++++++++++++++++++++++++++
>>   3 files changed, 149 insertions(+)
>>   create mode 100644 drivers/reset/reset-qcom-pdc.c
>>
>> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
>> index 13d28fdbdbb5..5344e202a630 100644
>> --- a/drivers/reset/Kconfig
>> +++ b/drivers/reset/Kconfig
>> @@ -98,6 +98,15 @@ config RESET_QCOM_AOSS
>>   	  reset signals provided by AOSS for Modem, Venus, ADSP,
>>   	  GPU, Camera, Wireless, Display subsystem. Otherwise, say N.
>>   
>> +config RESET_QCOM_PDC
>> +	bool "Qcom PDC Reset Driver"
>> +	depends on ARCH_QCOM || COMPILE_TEST
>> +	help
>> +	  This enables the PDC (Power Domain Controller) reset driver
>> +	  for Qualcomm Technologies Inc SDM845 SoCs. Say Y if you want
>> +	  to control reset signals provided by PDC for Modem, Compute,
>> +	  Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS.
>> +
>>   config RESET_SIMPLE
>>   	bool "Simple Reset Controller Driver" if COMPILE_TEST
>>   	default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED
>> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
>> index 4243c38228e2..d08e8b90046a 100644
>> --- a/drivers/reset/Makefile
>> +++ b/drivers/reset/Makefile
>> @@ -16,6 +16,7 @@ obj-$(CONFIG_RESET_MESON_AUDIO_ARB) += reset-meson-audio-arb.o
>>   obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
>>   obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
>>   obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
>> +obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o
>>   obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
>>   obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o
>>   obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
>> diff --git a/drivers/reset/reset-qcom-pdc.c b/drivers/reset/reset-qcom-pdc.c
>> new file mode 100644
>> index 000000000000..64a0041e3452
>> --- /dev/null
>> +++ b/drivers/reset/reset-qcom-pdc.c
>> @@ -0,0 +1,139 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2018 The Linux Foundation. All rights reserved.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/reset-controller.h>
>> +#include <linux/regmap.h>
>> +#include <linux/of_device.h>
>> +#include <dt-bindings/reset/qcom,sdm845-pdc.h>
>> +
>> +struct qcom_pdc_reset_map {
>> +	u8 bit;
>> +};
>> +
>> +struct qcom_pdc_desc {
>> +	const struct regmap_config *config;
>> +	const struct qcom_pdc_reset_map *resets;
>> +	size_t num_resets;
>> +};
>> +
>> +struct qcom_pdc_reset_data {
>> +	struct reset_controller_dev rcdev;
>> +	struct regmap *regmap;
>> +	const struct qcom_pdc_desc *desc;
>> +};
>> +
>> +static const struct regmap_config sdm845_pdc_regmap_config = {
>> +	.name		= "pdc-reset",
>> +	.reg_bits	= 32,
>> +	.reg_stride	= 4,
>> +	.val_bits	= 32,
>> +	.max_register	= 0x20000,
>> +	.fast_io	= true,
>> +};
>> +
>> +static const struct qcom_pdc_reset_map sdm845_pdc_resets[] = {
>> +	[PDC_APPS_SYNC_RESET] = {0},
>> +	[PDC_SP_SYNC_RESET] = {1},
>> +	[PDC_AUDIO_SYNC_RESET] = {2},
>> +	[PDC_SENSORS_SYNC_RESET] = {3},
>> +	[PDC_AOP_SYNC_RESET] = {4},
>> +	[PDC_DEBUG_SYNC_RESET] = {5},
>> +	[PDC_GPU_SYNC_RESET] = {6},
>> +	[PDC_DISPLAY_SYNC_RESET] = {7},
>> +	[PDC_COMPUTE_SYNC_RESET] = {8},
>> +	[PDC_MODEM_SYNC_RESET] = {9},
>> +};
>> +
>> +static const struct qcom_pdc_desc sdm845_pdc_desc = {
>> +	.config = &sdm845_pdc_regmap_config,
>> +	.resets = sdm845_pdc_resets,
>> +	.num_resets = ARRAY_SIZE(sdm845_pdc_resets),
>> +};
>> +
>> +static inline struct qcom_pdc_reset_data *to_qcom_pdc_reset_data(
>> +				struct reset_controller_dev *rcdev)
>> +{
>> +	return container_of(rcdev, struct qcom_pdc_reset_data, rcdev);
>> +}
>> +
>> +static int qcom_pdc_control_assert(struct reset_controller_dev *rcdev,
>> +					unsigned long idx)
>> +{
>> +	struct qcom_pdc_reset_data *data = to_qcom_pdc_reset_data(rcdev);
>> +	const struct qcom_pdc_reset_map *map = &data->desc->resets[idx];
>> +
>> +	return regmap_update_bits(data->regmap, 0x100,
> 
> Does this register have a name? If so, a #define would be preferable.
> Otherwise this driver looks fine to me.
> 

Yes will had a separate #define for it.

>> +					BIT(map->bit), BIT(map->bit));
>> +}
>> +
>> +static int qcom_pdc_control_deassert(struct reset_controller_dev *rcdev,
>> +					unsigned long idx)
>> +{
>> +	struct qcom_pdc_reset_data *data = to_qcom_pdc_reset_data(rcdev);
>> +	const struct qcom_pdc_reset_map *map = &data->desc->resets[idx];
>> +
>> +	return regmap_update_bits(data->regmap, 0x100, BIT(map->bit), 0);
>> +}
>> +
>> +static const struct reset_control_ops qcom_pdc_reset_ops = {
>> +	.assert = qcom_pdc_control_assert,
>> +	.deassert = qcom_pdc_control_deassert,
>> +};
>> +
>> +static int qcom_pdc_reset_probe(struct platform_device *pdev)
>> +{
>> +	struct qcom_pdc_reset_data *data;
>> +	struct device *dev = &pdev->dev;
>> +	const struct qcom_pdc_desc *desc;
>> +	void __iomem *base;
>> +	struct resource *res;
>> +
>> +	desc = of_device_get_match_data(dev);
>> +	if (!desc)
>> +		return -EINVAL;
>> +
>> +	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
>> +	if (!data)
>> +		return -ENOMEM;
>> +
>> +	data->desc = desc;
>> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +	base = devm_ioremap_resource(dev, res);
>> +	if (IS_ERR(base))
>> +		return PTR_ERR(base);
>> +
>> +	data->regmap = devm_regmap_init_mmio(dev, base, desc->config);
>> +	if (IS_ERR(data->regmap)) {
>> +		dev_err(dev, "Unable to get pdc-global regmap");
>> +		return PTR_ERR(data->regmap);
>> +	}
>> +
>> +	data->rcdev.owner = THIS_MODULE;
>> +	data->rcdev.ops = &qcom_pdc_reset_ops;
>> +	data->rcdev.nr_resets = desc->num_resets;
>> +	data->rcdev.of_node = dev->of_node;
>> +
>> +	return devm_reset_controller_register(dev, &data->rcdev);
>> +}
>> +
>> +static const struct of_device_id qcom_pdc_reset_of_match[] = {
>> +	{ .compatible = "qcom,sdm845-pdc-global", .data = &sdm845_pdc_desc },
>> +	{}
>> +};
>> +
>> +static struct platform_driver qcom_pdc_reset_driver = {
>> +	.probe = qcom_pdc_reset_probe,
>> +	.driver = {
>> +		.name = "qcom_pdc_reset",
>> +		.of_match_table = qcom_pdc_reset_of_match,
>> +	},
>> +};
>> +
>> +builtin_platform_driver(qcom_pdc_reset_driver);
>> +
>> +MODULE_DESCRIPTION("Qualcomm PDC Reset Driver");
>> +MODULE_LICENSE("GPL v2");
> 
> regards
> Philipp
> 

-- 
Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc, is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

  reply index

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-27 15:28 [PATCH 1/4] dt-bindings: reset: Add PDC reset binding for SDM845 SoCs Sibi Sankar
2018-07-27 15:28 ` [PATCH 2/4] reset: qcom: PDC (Power Domain Controller) reset controller Sibi Sankar
2018-07-31  8:51   ` Philipp Zabel
2018-07-31 13:00     ` Sibi S [this message]
2018-08-21 22:17   ` Bjorn Andersson
2018-07-27 15:28 ` [PATCH 3/4] remoteproc: qcom: q6v5-pil: Explicitly get mss_restart line Sibi Sankar
2018-07-31  8:57   ` Philipp Zabel
2018-07-31 13:11     ` Sibi S
2018-07-27 15:28 ` [PATCH 4/4] remoteproc: qcom: q6v5-pil: Add PDC restart for modem on SDM845 SoCs Sibi Sankar
2018-07-31  8:54   ` Philipp Zabel
2018-07-31 13:13     ` Sibi S
2018-08-07 18:18   ` Rob Herring
2018-08-08 15:45     ` Sibi Sankar
2018-08-21 22:33   ` Bjorn Andersson
2018-07-31  8:42 ` [PATCH 1/4] dt-bindings: reset: Add PDC reset binding for " Philipp Zabel
2018-07-31 12:57   ` Sibi S
2018-08-07 18:16     ` Rob Herring
2018-08-08 15:44       ` Sibi Sankar
2018-08-08 21:37         ` Jordan Crouse
2018-08-08 22:48           ` Jordan Crouse
2018-08-21 22:08 ` Bjorn Andersson

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=72f17bfc-9b19-7cfa-2aa7-8d45cd1ed39e@codeaurora.org \
    --to=sibis@codeaurora.org \
    --cc=akdwived@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=ohad@wizery.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=sricharan@codeaurora.org \
    --cc=tsoni@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox