LKML Archive on lore.kernel.org
 help / color / Atom feed
From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: Peter Zijlstra <peterz@infradead.org>,
	Linux PM <linux-pm@vger.kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Paul McKenney <paulmck@linux.vnet.ibm.com>,
	Thomas Ilsche <thomas.ilsche@tu-dresden.de>,
	Doug Smythies <dsmythies@telus.net>,
	Rik van Riel <riel@surriel.com>,
	Aubrey Li <aubrey.li@linux.intel.com>,
	Mike Galbraith <mgalbraith@suse.de>,
	LKML <linux-kernel@vger.kernel.org>
Subject: [RFT][PATCH v7.3 5/8] cpuidle: Return nohz hint from cpuidle_select()
Date: Thu, 22 Mar 2018 18:40:17 +0100
Message-ID: <7336733.EjMJpVF2xN@aspire.rjw.lan> (raw)
In-Reply-To: <1635957.yuHkCe9oyz@aspire.rjw.lan>

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Add a new pointer argument to cpuidle_select() and to the ->select
cpuidle governor callback to allow a boolean value indicating
whether or not the tick should be stopped before entering the
selected state to be returned from there.

Make the ladder governor ignore that pointer (to preserve its
current behavior) and make the menu governor return 'false" through
it if:
 (1) the idle exit latency is constrained at 0, or
 (2) the selected state is a polling one, or
 (3) the expected idle period duration is within the tick period
     range.

In addition to that, the correction factor computations in the menu
governor need to take the possibility that the tick may not be
stopped into account to avoid artificially small correction factor
values.  To that end, add a mechanism to record tick wakeups, as
suggested by Peter Zijlstra, and use it to modify the menu_update()
behavior when tick wakeup occurs.  Namely, if the CPU is woken up by
the tick and the return value of tick_nohz_get_sleep_length() is not
within the tick boundary, the predicted idle duration is likely too
short, so make menu_update() try to compensate for that by updating
the governor statistics as though the CPU was idle for a long time.

Since the value returned through the new argument pointer of
cpuidle_select() is not used by its caller yet, this change by
itself is not expected to alter the functionality of the code.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---

One more revision here.

>From the Thomas Ilsche's testing on the Skylake server it looks like
data->intervals[] need to be updated along with the correction factor
on tick wakeups that occur when next_timer_us is above the tick boundary.

The difference between this and the original v7 (of patch [5/8]) is
what happens in menu_update().  This time next_timer_us is checked
properly and if that is above the tick boundary and a tick wakeup occurs,
the function simply sets mesured_us to a large constant and uses that to
update both the correction factor and data->intervals[] (the particular
value used in this patch was found through a bit of experimentation).

Let's see how this works for Thomas and Doug.

For easier testing there is a git branch containing this patch (and the
rest of the series) at:

 git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git \
 idle-loop-v7.3

Thanks!

---
 drivers/cpuidle/cpuidle.c          |   10 +++++-
 drivers/cpuidle/governors/ladder.c |    3 +
 drivers/cpuidle/governors/menu.c   |   59 +++++++++++++++++++++++++++++--------
 include/linux/cpuidle.h            |    8 +++--
 include/linux/tick.h               |    2 +
 kernel/sched/idle.c                |    4 +-
 kernel/time/tick-sched.c           |   20 ++++++++++++
 7 files changed, 87 insertions(+), 19 deletions(-)

Index: linux-pm/include/linux/cpuidle.h
===================================================================
--- linux-pm.orig/include/linux/cpuidle.h
+++ linux-pm/include/linux/cpuidle.h
@@ -135,7 +135,8 @@ extern bool cpuidle_not_available(struct
 				  struct cpuidle_device *dev);
 
 extern int cpuidle_select(struct cpuidle_driver *drv,
-			  struct cpuidle_device *dev);
+			  struct cpuidle_device *dev,
+			  bool *stop_tick);
 extern int cpuidle_enter(struct cpuidle_driver *drv,
 			 struct cpuidle_device *dev, int index);
 extern void cpuidle_reflect(struct cpuidle_device *dev, int index);
@@ -167,7 +168,7 @@ static inline bool cpuidle_not_available
 					 struct cpuidle_device *dev)
 {return true; }
 static inline int cpuidle_select(struct cpuidle_driver *drv,
-				 struct cpuidle_device *dev)
+				 struct cpuidle_device *dev, bool *stop_tick)
 {return -ENODEV; }
 static inline int cpuidle_enter(struct cpuidle_driver *drv,
 				struct cpuidle_device *dev, int index)
@@ -250,7 +251,8 @@ struct cpuidle_governor {
 					struct cpuidle_device *dev);
 
 	int  (*select)		(struct cpuidle_driver *drv,
-					struct cpuidle_device *dev);
+					struct cpuidle_device *dev,
+					bool *stop_tick);
 	void (*reflect)		(struct cpuidle_device *dev, int index);
 };
 
Index: linux-pm/kernel/sched/idle.c
===================================================================
--- linux-pm.orig/kernel/sched/idle.c
+++ linux-pm/kernel/sched/idle.c
@@ -188,13 +188,15 @@ static void cpuidle_idle_call(void)
 		next_state = cpuidle_find_deepest_state(drv, dev);
 		call_cpuidle(drv, dev, next_state);
 	} else {
+		bool stop_tick = true;
+
 		tick_nohz_idle_stop_tick();
 		rcu_idle_enter();
 
 		/*
 		 * Ask the cpuidle framework to choose a convenient idle state.
 		 */
-		next_state = cpuidle_select(drv, dev);
+		next_state = cpuidle_select(drv, dev, &stop_tick);
 		entered_state = call_cpuidle(drv, dev, next_state);
 		/*
 		 * Give the governor an opportunity to reflect on the outcome
Index: linux-pm/drivers/cpuidle/cpuidle.c
===================================================================
--- linux-pm.orig/drivers/cpuidle/cpuidle.c
+++ linux-pm/drivers/cpuidle/cpuidle.c
@@ -272,12 +272,18 @@ int cpuidle_enter_state(struct cpuidle_d
  *
  * @drv: the cpuidle driver
  * @dev: the cpuidle device
+ * @stop_tick: indication on whether or not to stop the tick
  *
  * Returns the index of the idle state.  The return value must not be negative.
+ *
+ * The memory location pointed to by @stop_tick is expected to be written the
+ * 'false' boolean value if the scheduler tick should not be stopped before
+ * entering the returned state.
  */
-int cpuidle_select(struct cpuidle_driver *drv, struct cpuidle_device *dev)
+int cpuidle_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,
+		   bool *stop_tick)
 {
-	return cpuidle_curr_governor->select(drv, dev);
+	return cpuidle_curr_governor->select(drv, dev, stop_tick);
 }
 
 /**
Index: linux-pm/drivers/cpuidle/governors/ladder.c
===================================================================
--- linux-pm.orig/drivers/cpuidle/governors/ladder.c
+++ linux-pm/drivers/cpuidle/governors/ladder.c
@@ -63,9 +63,10 @@ static inline void ladder_do_selection(s
  * ladder_select_state - selects the next state to enter
  * @drv: cpuidle driver
  * @dev: the CPU
+ * @dummy: not used
  */
 static int ladder_select_state(struct cpuidle_driver *drv,
-				struct cpuidle_device *dev)
+			       struct cpuidle_device *dev, bool *dummy)
 {
 	struct ladder_device *ldev = this_cpu_ptr(&ladder_devices);
 	struct device *device = get_cpu_device(dev->cpu);
Index: linux-pm/drivers/cpuidle/governors/menu.c
===================================================================
--- linux-pm.orig/drivers/cpuidle/governors/menu.c
+++ linux-pm/drivers/cpuidle/governors/menu.c
@@ -123,6 +123,7 @@
 struct menu_device {
 	int		last_state_idx;
 	int             needs_update;
+	int             tick_wakeup;
 
 	unsigned int	next_timer_us;
 	unsigned int	predicted_us;
@@ -279,8 +280,10 @@ again:
  * menu_select - selects the next idle state to enter
  * @drv: cpuidle driver containing state data
  * @dev: the CPU
+ * @stop_tick: indication on whether or not to stop the tick
  */
-static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev)
+static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,
+		       bool *stop_tick)
 {
 	struct menu_device *data = this_cpu_ptr(&menu_devices);
 	struct device *device = get_cpu_device(dev->cpu);
@@ -303,8 +306,10 @@ static int menu_select(struct cpuidle_dr
 		latency_req = resume_latency;
 
 	/* Special case when user has set very strict latency requirement */
-	if (unlikely(latency_req == 0))
+	if (unlikely(latency_req == 0)) {
+		*stop_tick = false;
 		return 0;
+	}
 
 	/* determine the expected residency time, round up */
 	data->next_timer_us = ktime_to_us(tick_nohz_get_sleep_length());
@@ -354,6 +359,7 @@ static int menu_select(struct cpuidle_dr
 	if (latency_req > interactivity_req)
 		latency_req = interactivity_req;
 
+	expected_interval = data->predicted_us;
 	/*
 	 * Find the idle state with the lowest power while satisfying
 	 * our constraints.
@@ -369,15 +375,30 @@ static int menu_select(struct cpuidle_dr
 			idx = i; /* first enabled state */
 		if (s->target_residency > data->predicted_us)
 			break;
-		if (s->exit_latency > latency_req)
+		if (s->exit_latency > latency_req) {
+			/*
+			 * If we break out of the loop for latency reasons, use
+			 * the target residency of the selected state as the
+			 * expected idle duration so that the tick is retained
+			 * as long as that target residency is low enough.
+			 */
+			expected_interval = drv->states[idx].target_residency;
 			break;
-
+		}
 		idx = i;
 	}
 
 	if (idx == -1)
 		idx = 0; /* No states enabled. Must use 0. */
 
+	/*
+	 * Don't stop the tick if the selected state is a polling one or if the
+	 * expected idle duration is shorter than the tick period length.
+	 */
+	if ((drv->states[idx].flags & CPUIDLE_FLAG_POLLING) ||
+	    expected_interval < TICK_USEC)
+		*stop_tick = false;
+
 	data->last_state_idx = idx;
 
 	return data->last_state_idx;
@@ -397,6 +418,7 @@ static void menu_reflect(struct cpuidle_
 
 	data->last_state_idx = index;
 	data->needs_update = 1;
+	data->tick_wakeup = tick_nohz_idle_got_tick();
 }
 
 /**
@@ -427,14 +449,27 @@ static void menu_update(struct cpuidle_d
 	 * assume the state was never reached and the exit latency is 0.
 	 */
 
-	/* measured value */
-	measured_us = cpuidle_get_last_residency(dev);
-
-	/* Deduct exit latency */
-	if (measured_us > 2 * target->exit_latency)
-		measured_us -= target->exit_latency;
-	else
-		measured_us /= 2;
+	if (data->tick_wakeup && data->next_timer_us > TICK_USEC) {
+		/*
+		 * The nohz code said that there wouldn't be any events within
+		 * the tick boundary (if the tick was stopped), but the idle
+		 * duration predictor had a differing opinion.  Since the CPU
+		 * was woken up by a tick (that wasn't stopped after all), the
+		 * predictor was not quite right, so assume that the CPU could
+		 * have been idle long (but not forever) to help the idle
+		 * duration predictor do a better job next time.
+		 */
+		measured_us = 9 * MAX_INTERESTING / 10;
+	} else {
+		/* measured value */
+		measured_us = cpuidle_get_last_residency(dev);
+
+		/* Deduct exit latency */
+		if (measured_us > 2 * target->exit_latency)
+			measured_us -= target->exit_latency;
+		else
+			measured_us /= 2;
+	}
 
 	/* Make sure our coefficients do not exceed unity */
 	if (measured_us > data->next_timer_us)
Index: linux-pm/kernel/time/tick-sched.c
===================================================================
--- linux-pm.orig/kernel/time/tick-sched.c
+++ linux-pm/kernel/time/tick-sched.c
@@ -991,6 +991,20 @@ void tick_nohz_irq_exit(void)
 }
 
 /**
+ * tick_nohz_idle_got_tick - Check whether or not the tick handler has run
+ */
+bool tick_nohz_idle_got_tick(void)
+{
+	struct tick_sched *ts = this_cpu_ptr(&tick_cpu_sched);
+
+	if (ts->inidle > 1) {
+		ts->inidle = 1;
+		return true;
+	}
+	return false;
+}
+
+/**
  * tick_nohz_get_sleep_length - return the length of the current sleep
  *
  * Called from power state control code with interrupts disabled
@@ -1101,6 +1115,9 @@ static void tick_nohz_handler(struct clo
 	struct pt_regs *regs = get_irq_regs();
 	ktime_t now = ktime_get();
 
+	if (ts->inidle)
+		ts->inidle = 2;
+
 	dev->next_event = KTIME_MAX;
 
 	tick_sched_do_timer(now);
@@ -1198,6 +1215,9 @@ static enum hrtimer_restart tick_sched_t
 	struct pt_regs *regs = get_irq_regs();
 	ktime_t now = ktime_get();
 
+	if (ts->inidle)
+		ts->inidle = 2;
+
 	tick_sched_do_timer(now);
 
 	/*
Index: linux-pm/include/linux/tick.h
===================================================================
--- linux-pm.orig/include/linux/tick.h
+++ linux-pm/include/linux/tick.h
@@ -119,6 +119,7 @@ extern void tick_nohz_idle_restart_tick(
 extern void tick_nohz_idle_enter(void);
 extern void tick_nohz_idle_exit(void);
 extern void tick_nohz_irq_exit(void);
+extern bool tick_nohz_idle_got_tick(void);
 extern ktime_t tick_nohz_get_sleep_length(void);
 extern unsigned long tick_nohz_get_idle_calls(void);
 extern unsigned long tick_nohz_get_idle_calls_cpu(int cpu);
@@ -139,6 +140,7 @@ static inline void tick_nohz_idle_stop_t
 static inline void tick_nohz_idle_restart_tick(void) { }
 static inline void tick_nohz_idle_enter(void) { }
 static inline void tick_nohz_idle_exit(void) { }
+static inline bool tick_nohz_idle_got_tick(void) { return false; }
 
 static inline ktime_t tick_nohz_get_sleep_length(void)
 {

  parent reply index

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-20 15:12 [RFT][PATCH v7 0/8] sched/cpuidle: Idle loop rework Rafael J. Wysocki
2018-03-20 15:13 ` [RFT][PATCH v7 1/8] time: tick-sched: Reorganize idle tick management code Rafael J. Wysocki
2018-03-20 15:15 ` [RFT][PATCH v7 2/8] sched: idle: Do not stop the tick upfront in the idle loop Rafael J. Wysocki
2018-03-20 15:15 ` [RFT][PATCH v7 3/8] " Rafael J. Wysocki
2018-03-20 18:00   ` [Correction][RFT][PATCH v7 3/8] sched: idle: Do not stop the tick before cpuidle_idle_call() Rafael J. Wysocki
2018-03-20 15:16 ` [RFT][PATCH v7 4/8] jiffies: Introduce USER_TICK_USEC and redefine TICK_USEC Rafael J. Wysocki
2018-03-20 15:45 ` [RFT][PATCH v7 5/8] cpuidle: Return nohz hint from cpuidle_select() Rafael J. Wysocki
2018-03-21  6:48   ` [RFT][PATCH v7.1 " Rafael J. Wysocki
2018-03-21 11:52     ` Rafael J. Wysocki
2018-03-21 13:03   ` [RFT][PATCH v7.2 " Rafael J. Wysocki
2018-03-21 14:36   ` [RFT][PATCH v7 " Rafael J. Wysocki
2018-03-21 17:59     ` Thomas Ilsche
2018-03-21 22:15       ` Rafael J. Wysocki
2018-03-22 13:18         ` Thomas Ilsche
2018-03-22 17:23           ` Rafael J. Wysocki
2018-03-22  6:24       ` Doug Smythies
2018-03-22 15:41       ` Doug Smythies
2018-03-22 17:21         ` Rafael J. Wysocki
2018-03-21 18:23     ` Doug Smythies
2018-03-22 17:40   ` Rafael J. Wysocki [this message]
2018-03-28  9:14     ` [RFT][PATCH v7.3 " Thomas Ilsche
2018-03-30  9:39       ` Rafael J. Wysocki
2018-04-10 15:22         ` Thomas Ilsche
2018-03-22 20:46   ` Doug Smythies
2018-03-20 15:45 ` [RFT][PATCH v7 6/8] sched: idle: Select idle state before stopping the tick Rafael J. Wysocki
2018-03-27 21:50   ` Thomas Ilsche
2018-03-27 22:10     ` Rafael J. Wysocki
2018-03-28  8:13       ` Rafael J. Wysocki
2018-03-28  8:38         ` Thomas Ilsche
2018-03-28 10:37           ` Rafael J. Wysocki
2018-03-28 10:56             ` Rafael J. Wysocki
2018-03-28 15:15               ` Thomas Ilsche
2018-03-28 20:41               ` Doug Smythies
2018-03-28 23:11                 ` Rafael J. Wysocki
2018-03-20 15:46 ` [RFT][PATCH v7 7/8] cpuidle: menu: Refine idle state selection for running tick Rafael J. Wysocki
2018-03-20 15:47 ` [RFT][PATCH v7 8/8] cpuidle: menu: Avoid selecting shallow states with stopped tick Rafael J. Wysocki
2018-03-20 17:52 ` [RFT][PATCH v7 3/8] sched: idle: Do not stop the tick upfront in the idle loop Doug Smythies
2018-03-20 18:01   ` Rafael J. Wysocki
2018-03-21 12:31 ` [RFT][PATCH v7 0/8] sched/cpuidle: Idle loop rework Rik van Riel
2018-03-21 13:55   ` Rafael J. Wysocki
2018-03-21 14:53     ` Rik van Riel

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7336733.EjMJpVF2xN@aspire.rjw.lan \
    --to=rjw@rjwysocki.net \
    --cc=aubrey.li@linux.intel.com \
    --cc=dsmythies@telus.net \
    --cc=fweisbec@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mgalbraith@suse.de \
    --cc=paulmck@linux.vnet.ibm.com \
    --cc=peterz@infradead.org \
    --cc=riel@surriel.com \
    --cc=tglx@linutronix.de \
    --cc=thomas.ilsche@tu-dresden.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox