From: Dave Gerlach <d-gerlach@ti.com>
To: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
<devicetree@vger.kernel.org>
Cc: Tony Lindgren <tony@atomide.com>, Paul Walmsley <paul@pwsan.com>,
Benoit Cousson <bcousson@baylibre.com>,
Kevin Hilman <khilman@linaro.org>,
Ohad Ben-Cohen <ohad@wizery.com>, Suman Anna <s-anna@ti.com>,
Dave Gerlach <d-gerlach@ti.com>
Subject: [RFC PATCH 1/3] ARM: OMAP2+: Use pdata-quirks for wkup_m3 deassert_hardreset
Date: Wed, 26 Nov 2014 15:27:10 -0600 [thread overview]
Message-ID: <735836ce94cac8261f0f61851ea6b55ceb3759ba.1417029919.git.d-gerlach@ti.com> (raw)
In-Reply-To: <cover.1417029919.git.d-gerlach@ti.com>
Use pdata-quirks to provide platform data required for reset
of the wkup_m3 during boot.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
---
arch/arm/mach-omap2/pdata-quirks.c | 13 +++++++++++++
include/linux/platform_data/wkup_m3.h | 23 +++++++++++++++++++++++
2 files changed, 36 insertions(+)
create mode 100644 include/linux/platform_data/wkup_m3.h
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index cec9d6c..1c0bcdb 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -17,6 +17,7 @@
#include <linux/platform_data/pinctrl-single.h>
#include <linux/platform_data/iommu-omap.h>
+#include <linux/platform_data/wkup_m3.h>
#include "am35xx.h"
#include "common.h"
@@ -260,6 +261,14 @@ static void __init omap3_tao3530_legacy_init(void)
}
#endif /* CONFIG_ARCH_OMAP3 */
+#ifdef CONFIG_SOC_AM33XX
+static struct wkup_m3_platform_data wkup_m3_data = {
+ .reset_name = "wkup_m3",
+ .assert_reset = omap_device_assert_hardreset,
+ .deassert_reset = omap_device_deassert_hardreset,
+};
+#endif
+
#ifdef CONFIG_ARCH_OMAP4
static void __init omap4_sdp_legacy_init(void)
{
@@ -355,6 +364,10 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
&am35xx_emac_pdata),
#endif
+#ifdef CONFIG_SOC_AM33XX
+ OF_DEV_AUXDATA("ti,am3353-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
+ &wkup_m3_data),
+#endif
#ifdef CONFIG_ARCH_OMAP4
OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata),
diff --git a/include/linux/platform_data/wkup_m3.h b/include/linux/platform_data/wkup_m3.h
new file mode 100644
index 0000000..6ee33d7
--- /dev/null
+++ b/include/linux/platform_data/wkup_m3.h
@@ -0,0 +1,23 @@
+/*
+ * omap wkup_m3: platform data
+ *
+ * Copyright (C) 2014 Texas Instruments, Inc.
+ *
+ * Dave Gerlach <d-gerlach@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _LINUX_PLATFORM_DATA_WKUP_M3_H
+#define _LINUX_PLATFORM_DATA_WKUP_M3_H
+
+struct wkup_m3_platform_data {
+ const char *reset_name;
+
+ int (*assert_reset)(struct platform_device *pdev, const char *name);
+ int (*deassert_reset)(struct platform_device *pdev, const char *name);
+};
+
+#endif /* _LINUX_PLATFORM_DATA_WKUP_M3_H */
--
2.1.0
next prev parent reply other threads:[~2014-11-26 21:28 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-26 21:27 [RFC PATCH 0/3] remoteproc: Introduce wkup_m3_rproc driver Dave Gerlach
2014-11-26 21:27 ` Dave Gerlach [this message]
2014-11-26 21:27 ` [RFC PATCH 2/3] Documentation: dt: add ti,am3353-wkup-m3 bindings Dave Gerlach
2014-11-26 21:27 ` [RFC PATCH 3/3] remoteproc: wkup_m3: Add wkup_m3 remote proc driver Dave Gerlach
2014-11-26 21:38 ` [RFC PATCH 1/3] Documentation: dt: add ti,am3353-wkup-m3-ipc bindings Dave Gerlach
2014-11-26 21:38 ` [RFC PATCH 2/3] soc: ti: Add wkup_m3_ipc driver Dave Gerlach
2014-11-26 21:51 ` Arnd Bergmann
2014-12-12 22:03 ` Dave Gerlach
2014-11-26 21:38 ` [RFC PATCH 3/3] ARM: dts: am33xx: Add wkup_m3_ipc node Dave Gerlach
2014-11-26 21:39 ` [RFC PATCH 1/3] Documentation: dt: add ti,am3352-emif bindings Dave Gerlach
2014-11-26 21:39 ` [RFC PATCH 2/3] memory: ti-emif-sram: introduce relocatable suspend/resume handlers Dave Gerlach
2014-11-26 21:39 ` [RFC PATCH 3/3] ARM: dts: am33xx: Add emif node Dave Gerlach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=735836ce94cac8261f0f61851ea6b55ceb3759ba.1417029919.git.d-gerlach@ti.com \
--to=d-gerlach@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=ohad@wizery.com \
--cc=paul@pwsan.com \
--cc=s-anna@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).