LKML Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/2] reset: Add Broadcom STB SW_INIT reset controller driver
@ 2018-12-21  1:34 Florian Fainelli
  2018-12-21  1:34 ` [PATCH 1/2] dt-bindings: reset: Add document for Broadcom STB reset controller Florian Fainelli
  2018-12-21  1:34 ` [PATCH 2/2] reset: Add Broadcom STB SW_INIT reset controller driver Florian Fainelli
  0 siblings, 2 replies; 13+ messages in thread
From: Florian Fainelli @ 2018-12-21  1:34 UTC (permalink / raw)
  To: p.zabel, linux-kernel
  Cc: Florian Fainelli, Rob Herring, Mark Rutland, Brian Norris,
	Gregory Fong, bcm-kernel-feedback-list, devicetree,
	linux-arm-kernel

Hi Philipp,

This patch series adds support for the Broadcom STB reset controller
using SW_INIT-style registers which have one or more banks of 32
reset lines and separate CLEAR/SET/STATUS registers.

Thanks!

Florian Fainelli (2):
  dt-bindings: reset: Add document for Broadcom STB reset controller
  reset: Add Broadcom STB SW_INIT reset controller driver

 .../devicetree/bindings/reset/brcm,reset.txt  |  27 ++++
 drivers/reset/Kconfig                         |   7 +
 drivers/reset/Makefile                        |   1 +
 drivers/reset/reset-brcmstb.c                 | 121 ++++++++++++++++++
 4 files changed, 156 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/brcm,reset.txt
 create mode 100644 drivers/reset/reset-brcmstb.c

-- 
2.17.1


^ permalink raw reply	[flat|nested] 13+ messages in thread

end of thread, back to index

Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-21  1:34 [PATCH 0/2] reset: Add Broadcom STB SW_INIT reset controller driver Florian Fainelli
2018-12-21  1:34 ` [PATCH 1/2] dt-bindings: reset: Add document for Broadcom STB reset controller Florian Fainelli
2018-12-31 23:13   ` Scott Branden
2019-01-02 20:38     ` Florian Fainelli
2019-01-03 17:41   ` Rob Herring
2019-01-03 18:53     ` Florian Fainelli
2019-01-03 19:19       ` Rob Herring
2019-01-03 19:31         ` Florian Fainelli
2019-01-03 22:54           ` Rob Herring
2019-01-11 18:51             ` Florian Fainelli
2018-12-21  1:34 ` [PATCH 2/2] reset: Add Broadcom STB SW_INIT reset controller driver Florian Fainelli
2019-01-02 10:44   ` Philipp Zabel
2019-01-02 20:38     ` Florian Fainelli

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox