From: Heiner Kallweit <hkallweit1@gmail.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
Realtek linux nic maintainers <nic_swsd@realtek.com>,
David Miller <davem@davemloft.net>,
Mirko Lindner <mlindner@marvell.com>,
Stephen Hemminger <stephen@networkplumber.org>,
Clemens Ladisch <clemens@ladisch.de>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
alsa-devel@alsa-project.org
Subject: [PATCH v3 1/8] PCI: add constant PCI_STATUS_ERROR_BITS
Date: Tue, 25 Feb 2020 15:03:44 +0100 [thread overview]
Message-ID: <73dd692e-bbce-35f5-88e9-417fb0f7229e@gmail.com> (raw)
In-Reply-To: <20ca7c1f-7530-2d89-40a6-d97a65aa25ef@gmail.com>
This constant is used (with different names) in more than one driver,
so move it to the PCI core.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
drivers/net/ethernet/marvell/skge.h | 6 ------
drivers/net/ethernet/marvell/sky2.h | 6 ------
include/uapi/linux/pci_regs.h | 7 +++++++
3 files changed, 7 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/marvell/skge.h b/drivers/net/ethernet/marvell/skge.h
index 6fa7b6a34..e149bdfe1 100644
--- a/drivers/net/ethernet/marvell/skge.h
+++ b/drivers/net/ethernet/marvell/skge.h
@@ -15,12 +15,6 @@
#define PCI_VPD_ROM_SZ 7L<<14 /* VPD ROM size 0=256, 1=512, ... */
#define PCI_REV_DESC 1<<2 /* Reverse Descriptor bytes */
-#define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \
- PCI_STATUS_SIG_SYSTEM_ERROR | \
- PCI_STATUS_REC_MASTER_ABORT | \
- PCI_STATUS_REC_TARGET_ABORT | \
- PCI_STATUS_PARITY)
-
enum csr_regs {
B0_RAP = 0x0000,
B0_CTST = 0x0004,
diff --git a/drivers/net/ethernet/marvell/sky2.h b/drivers/net/ethernet/marvell/sky2.h
index b02b65230..851d8ed34 100644
--- a/drivers/net/ethernet/marvell/sky2.h
+++ b/drivers/net/ethernet/marvell/sky2.h
@@ -252,12 +252,6 @@ enum {
};
-#define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \
- PCI_STATUS_SIG_SYSTEM_ERROR | \
- PCI_STATUS_REC_MASTER_ABORT | \
- PCI_STATUS_REC_TARGET_ABORT | \
- PCI_STATUS_PARITY)
-
enum csr_regs {
B0_RAP = 0x0000,
B0_CTST = 0x0004,
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index 543769048..9b84a1278 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -68,6 +68,13 @@
#define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */
#define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */
+#define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \
+ PCI_STATUS_SIG_SYSTEM_ERROR | \
+ PCI_STATUS_REC_MASTER_ABORT | \
+ PCI_STATUS_REC_TARGET_ABORT | \
+ PCI_STATUS_SIG_TARGET_ABORT | \
+ PCI_STATUS_PARITY)
+
#define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8 revision */
#define PCI_REVISION_ID 0x08 /* Revision ID */
#define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */
--
2.25.1
next prev parent reply other threads:[~2020-02-25 14:08 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-25 14:03 [PATCH v3 0/8] PCI: add and use constant PCI_STATUS_ERROR_BITS and helper pci_status_get_and_clear_errors Heiner Kallweit
2020-02-25 14:03 ` Heiner Kallweit [this message]
2020-02-25 20:50 ` [PATCH v3 1/8] PCI: add constant PCI_STATUS_ERROR_BITS Bjorn Helgaas
2020-02-25 21:35 ` Heiner Kallweit
2020-02-25 14:04 ` [PATCH v3 2/8] PCI: add pci_status_get_and_clear_errors Heiner Kallweit
2020-02-25 20:57 ` Bjorn Helgaas
2020-02-25 14:04 ` [PATCH v3 3/8] r8169: use pci_status_get_and_clear_errors Heiner Kallweit
2020-02-25 14:05 ` [PATCH v3 4/8] net: cassini: " Heiner Kallweit
2020-02-25 14:05 ` [PATCH v3 5/8] net: sungem: " Heiner Kallweit
2020-02-25 14:06 ` [PATCH v3 6/8] net: skfp: use PCI_STATUS_ERROR_BITS Heiner Kallweit
2020-02-25 14:07 ` [PATCH v3 7/8] PCI: pci-bridge-emul: " Heiner Kallweit
2020-02-25 14:07 ` [PATCH v3 8/8] sound: bt87x: use pci_status_get_and_clear_errors Heiner Kallweit
2020-02-25 20:57 ` [PATCH v3 0/8] PCI: add and use constant PCI_STATUS_ERROR_BITS and helper pci_status_get_and_clear_errors Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=73dd692e-bbce-35f5-88e9-417fb0f7229e@gmail.com \
--to=hkallweit1@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=bhelgaas@google.com \
--cc=clemens@ladisch.de \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mlindner@marvell.com \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
--cc=perex@perex.cz \
--cc=stephen@networkplumber.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).