LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Luca Weiss <luca@z3ntu.xyz>
To: "Pavel Machek" <pavel@ucw.cz>, "Dan Murphy" <dmurphy@ti.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Andy Gross" <agross@kernel.org>,
	"Bjorn Andersson" <bjorn.andersson@linaro.org>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Lee Jones" <lee.jones@linaro.org>,
	"Martin Botka" <martin.botka1@gmail.com>,
	linux-arm-msm@vger.kernel.org
Cc: linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-pwm@vger.kernel.org,
	Bjorn Andersson <bjorn.andersson@linaro.org>
Subject: Re: [PATCH v6 2/4] leds: Add driver for Qualcomm LPG
Date: Thu, 22 Oct 2020 21:25:31 +0200
Message-ID: <7499087.fvuViRk2k7@g550jk> (raw)
In-Reply-To: <20201021201224.3430546-3-bjorn.andersson@linaro.org>

Hi Bjorn,

On Mittwoch, 21. Oktober 2020 22:12:22 CEST Bjorn Andersson wrote:
> The Light Pulse Generator (LPG) is a PWM-block found in a wide range of
> PMICs from Qualcomm. It can operate on fixed parameters or based on a
> lookup-table, altering the duty cycle over time - which provides the
> means for e.g. hardware assisted transitions of LED brightness.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> 
> Changes since v5:
> - Make sure to not used the state of the last channel in a group to
> determine if the current sink should be active for all channels in the
> group. - Replacement of unsigned -1 with UINT_MAX
> - Work around potential overflow by using larger data types, instead of
> separate code paths - Use cpu_to_l16() rather than hand rolling them
> - Minor style cleanups
> 
>  drivers/leds/Kconfig         |    9 +
>  drivers/leds/Makefile        |    1 +
>  drivers/leds/leds-qcom-lpg.c | 1190 ++++++++++++++++++++++++++++++++++
>  3 files changed, 1200 insertions(+)
>  create mode 100644 drivers/leds/leds-qcom-lpg.c

Tested on msm8974 (pm8941) on the Fairphone 2, works great there!

Tested-by: Luca Weiss <luca@z3ntu.xyz>

Regards
Luca



  reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-21 20:12 [PATCH v6 0/4] Qualcomm Light Pulse Generator Bjorn Andersson
2020-10-21 20:12 ` [PATCH v6 1/4] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding Bjorn Andersson
2020-10-26 15:02   ` Rob Herring
2020-10-21 20:12 ` [PATCH v6 2/4] leds: Add driver for Qualcomm LPG Bjorn Andersson
2020-10-22 19:25   ` Luca Weiss [this message]
2020-10-29 18:13   ` Pavel Machek
2020-10-21 20:12 ` [PATCH v6 3/4] arm64: dts: qcom: pm(i)8994: Add mpp and lpg blocks Bjorn Andersson
2020-10-21 20:12 ` [PATCH v6 4/4] arm64: dts: qcom: Add user LEDs on db820c Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7499087.fvuViRk2k7@g550jk \
    --to=luca@z3ntu.xyz \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmurphy@ti.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=martin.botka1@gmail.com \
    --cc=pavel@ucw.cz \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git