linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v9 0/2] drm: Add Thine THC63LVD1024 LVDS decoder bridge
@ 2018-04-18 14:40 ` Jacopo Mondi
  2018-04-18 14:40   ` [PATCH v9 1/2] dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder Jacopo Mondi
                     ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Jacopo Mondi @ 2018-04-18 14:40 UTC (permalink / raw)
  To: architt, a.hajda, Laurent.pinchart, airlied, vladimir_zapolskiy,
	horms, magnus.damm, geert, niklas.soderlund, sergei.shtylyov,
	robh+dt, mark.rutland
  Cc: Jacopo Mondi, dri-devel, linux-renesas-soc, devicetree, linux-kernel

As I have another series which is based on this one + Eagle board display
support, I'm re-sending this one to fix the small issue I pointed out in my
reply to v8.

Simon: no changes to Eagle DTS series, so the last one sent is still the good
one.

DRM: I have collected several reviewed-by tags both on driver and bindings.
Can I send out incremental patches on this series and consider this one to
be ready to be collected?

Thanks
   j

v8 -> v9:
- Put 'remote' OF node after usage not just in error path during device
  tree parsing routine
- Add Rob's Reviewed-by tag to the device tree bindings documentation

v7 -> b8:
- Make 'vcc' supply mandatory
- Use 'oe' property name to describe "OE" pin
- Minor fixes as suggested by Laurent on bindings and driver

v6 -> v7:
- Use semi-standard names for powerdown and output enable GPIOs as suggested
  by Rob and Vladimir
- Use 'regulator_get()' not the optional version, and list only 'vcc' as
  requested supply
- Addressed Laurent's review comments and removed Eagle display enablement patch
  to be sent separately

v5 -> v6:
- Drop check for CONFIG_OF as it is a Kconfig dependency
- Add Niklas Reviewed-by tags
- List [3/3] depenencies below commit message to ease integration

v4 -> v5:
- Fix punctuation in bindings documentation
- Add small statement to bindings document to clarify the chip has no
  control bus
- Print regulator name in enable/disable routines error path
- Add Andrzej Reviewed-by tag

v3 -> v4:
- Rename permutations of "pdwn" to just "pdwn" everywhere in the series
- Improve power enable/disable routines as suggested by Andrzej and Sergei
- Change "pdwn" gpio initialization to use the logical output level
- Change Kconfig description

v2 -> v3:
- Drop support for "lvds-decoder" and make the driver THC63LVD1024 specific
-- Rework bindings to describe multiple input/output ports
-- Rename driver and remove "lvds-decoder" references
-- Rework Eagle DTS to use new bindings

v1 -> v2:
- Drop support for THC63LVD1024

Jacopo Mondi (2):
  dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder
  drm: bridge: Add thc63lvd1024 LVDS decoder driver

 .../bindings/display/bridge/thine,thc63lvd1024.txt |  60 ++++++
 drivers/gpu/drm/bridge/Kconfig                     |   6 +
 drivers/gpu/drm/bridge/Makefile                    |   1 +
 drivers/gpu/drm/bridge/thc63lvd1024.c              | 205 +++++++++++++++++++++
 4 files changed, 272 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
 create mode 100644 drivers/gpu/drm/bridge/thc63lvd1024.c

--
2.7.4

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v9 1/2] dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder
  2018-04-18 14:40 ` [PATCH v9 0/2] drm: Add Thine THC63LVD1024 LVDS decoder bridge Jacopo Mondi
@ 2018-04-18 14:40   ` Jacopo Mondi
  2018-04-20  6:19     ` Vladimir Zapolskiy
  2018-04-18 14:40   ` [PATCH v9 2/2] drm: bridge: Add thc63lvd1024 LVDS decoder driver Jacopo Mondi
  2018-04-20  9:18   ` [PATCH v9 0/2] drm: Add Thine THC63LVD1024 LVDS decoder bridge Andrzej Hajda
  2 siblings, 1 reply; 6+ messages in thread
From: Jacopo Mondi @ 2018-04-18 14:40 UTC (permalink / raw)
  To: architt, a.hajda, Laurent.pinchart, airlied, vladimir_zapolskiy,
	horms, magnus.damm, geert, niklas.soderlund, sergei.shtylyov,
	robh+dt, mark.rutland
  Cc: Jacopo Mondi, dri-devel, linux-renesas-soc, devicetree, linux-kernel

Document Thine THC63LVD1024 LVDS decoder device tree bindings.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/display/bridge/thine,thc63lvd1024.txt | 60 ++++++++++++++++++++++
 1 file changed, 60 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt

diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
new file mode 100644
index 0000000..37f0c04
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
@@ -0,0 +1,60 @@
+Thine Electronics THC63LVD1024 LVDS decoder
+-------------------------------------------
+
+The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS streams
+to parallel data outputs. The chip supports single/dual input/output modes,
+handling up to two LVDS input streams and up to two digital CMOS/TTL outputs.
+
+Single or dual operation mode, output data mapping and DDR output modes are
+configured through input signals and the chip does not expose any control bus.
+
+Required properties:
+- compatible: Shall be "thine,thc63lvd1024"
+- vcc-supply: Power supply for TTL output, TTL CLOCKOUT signal, LVDS input,
+  PPL and digital circuitry
+
+Optional properties:
+- powerdown-gpios: Power down GPIO signal, pin name "/PDWN". Active low
+- oe-gpios: Output enable GPIO signal, pin name "OE". Active high
+
+The THC63LVD1024 video port connections are modeled according
+to OF graph bindings specified by Documentation/devicetree/bindings/graph.txt
+
+Required video port nodes:
+- port@0: First LVDS input port
+- port@2: First digital CMOS/TTL parallel output
+
+Optional video port nodes:
+- port@1: Second LVDS input port
+- port@3: Second digital CMOS/TTL parallel output
+
+Example:
+--------
+
+	thc63lvd1024: lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+
+		vcc-supply = <&reg_lvds_vcc>;
+		powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_dec_in_0: endpoint {
+					remote-endpoint = <&lvds_out>;
+				};
+			};
+
+			port@2{
+				reg = <2>;
+
+				lvds_dec_out_2: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v9 2/2] drm: bridge: Add thc63lvd1024 LVDS decoder driver
  2018-04-18 14:40 ` [PATCH v9 0/2] drm: Add Thine THC63LVD1024 LVDS decoder bridge Jacopo Mondi
  2018-04-18 14:40   ` [PATCH v9 1/2] dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder Jacopo Mondi
@ 2018-04-18 14:40   ` Jacopo Mondi
  2018-04-20  6:20     ` Vladimir Zapolskiy
  2018-04-20  9:18   ` [PATCH v9 0/2] drm: Add Thine THC63LVD1024 LVDS decoder bridge Andrzej Hajda
  2 siblings, 1 reply; 6+ messages in thread
From: Jacopo Mondi @ 2018-04-18 14:40 UTC (permalink / raw)
  To: architt, a.hajda, Laurent.pinchart, airlied, vladimir_zapolskiy,
	horms, magnus.damm, geert, niklas.soderlund, sergei.shtylyov,
	robh+dt, mark.rutland
  Cc: Jacopo Mondi, dri-devel, linux-renesas-soc, devicetree, linux-kernel

Add DRM bridge driver for Thine THC63LVD1024 LVDS to digital parallel
output converter.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/gpu/drm/bridge/Kconfig        |   6 +
 drivers/gpu/drm/bridge/Makefile       |   1 +
 drivers/gpu/drm/bridge/thc63lvd1024.c | 206 ++++++++++++++++++++++++++++++++++
 3 files changed, 213 insertions(+)
 create mode 100644 drivers/gpu/drm/bridge/thc63lvd1024.c

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 3aa65bd..42c9c2d 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -93,6 +93,12 @@ config DRM_SII9234
 	  It is an I2C driver, that detects connection of MHL bridge
 	  and starts encapsulation of HDMI signal.
 
+config DRM_THINE_THC63LVD1024
+	tristate "Thine THC63LVD1024 LVDS decoder bridge"
+	depends on OF
+	---help---
+	  Thine THC63LVD1024 LVDS/parallel converter driver.
+
 config DRM_TOSHIBA_TC358767
 	tristate "Toshiba TC358767 eDP bridge"
 	depends on OF
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 373eb28..fd90b16 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
 obj-$(CONFIG_DRM_SIL_SII8620) += sil-sii8620.o
 obj-$(CONFIG_DRM_SII902X) += sii902x.o
 obj-$(CONFIG_DRM_SII9234) += sii9234.o
+obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o
 obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
 obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
 obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
diff --git a/drivers/gpu/drm/bridge/thc63lvd1024.c b/drivers/gpu/drm/bridge/thc63lvd1024.c
new file mode 100644
index 0000000..c8b9edd
--- /dev/null
+++ b/drivers/gpu/drm/bridge/thc63lvd1024.c
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * THC63LVD1024 LVDS to parallel data DRM bridge driver.
+ *
+ * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_panel.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/of_graph.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+enum thc63_ports {
+	THC63_LVDS_IN0,
+	THC63_LVDS_IN1,
+	THC63_RGB_OUT0,
+	THC63_RGB_OUT1,
+};
+
+struct thc63_dev {
+	struct device *dev;
+
+	struct regulator *vcc;
+
+	struct gpio_desc *pdwn;
+	struct gpio_desc *oe;
+
+	struct drm_bridge bridge;
+	struct drm_bridge *next;
+};
+
+static inline struct thc63_dev *to_thc63(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct thc63_dev, bridge);
+}
+
+static int thc63_attach(struct drm_bridge *bridge)
+{
+	struct thc63_dev *thc63 = to_thc63(bridge);
+
+	return drm_bridge_attach(bridge->encoder, thc63->next, bridge);
+}
+
+static void thc63_enable(struct drm_bridge *bridge)
+{
+	struct thc63_dev *thc63 = to_thc63(bridge);
+	int ret;
+
+	ret = regulator_enable(thc63->vcc);
+	if (ret) {
+		dev_err(thc63->dev,
+			"Failed to enable regulator \"vcc\": %d\n", ret);
+		return;
+	}
+
+	gpiod_set_value(thc63->pdwn, 0);
+	gpiod_set_value(thc63->oe, 1);
+}
+
+static void thc63_disable(struct drm_bridge *bridge)
+{
+	struct thc63_dev *thc63 = to_thc63(bridge);
+	int ret;
+
+	gpiod_set_value(thc63->oe, 0);
+	gpiod_set_value(thc63->pdwn, 1);
+
+	ret = regulator_disable(thc63->vcc);
+	if (ret)
+		dev_err(thc63->dev,
+			"Failed to disable regulator \"vcc\": %d\n", ret);
+}
+
+static const struct drm_bridge_funcs thc63_bridge_func = {
+	.attach	= thc63_attach,
+	.enable = thc63_enable,
+	.disable = thc63_disable,
+};
+
+static int thc63_parse_dt(struct thc63_dev *thc63)
+{
+	struct device_node *thc63_out;
+	struct device_node *remote;
+
+	thc63_out = of_graph_get_endpoint_by_regs(thc63->dev->of_node,
+						  THC63_RGB_OUT0, -1);
+	if (!thc63_out) {
+		dev_err(thc63->dev, "Missing endpoint in port@%u\n",
+			THC63_RGB_OUT0);
+		return -ENODEV;
+	}
+
+	remote = of_graph_get_remote_port_parent(thc63_out);
+	of_node_put(thc63_out);
+	if (!remote) {
+		dev_err(thc63->dev, "Endpoint in port@%u unconnected\n",
+			THC63_RGB_OUT0);
+		return -ENODEV;
+	}
+
+	if (!of_device_is_available(remote)) {
+		dev_err(thc63->dev, "port@%u remote endpoint is disabled\n",
+			THC63_RGB_OUT0);
+		of_node_put(remote);
+		return -ENODEV;
+	}
+
+	thc63->next = of_drm_find_bridge(remote);
+	of_node_put(remote);
+	if (!thc63->next)
+		return -EPROBE_DEFER;
+
+	return 0;
+}
+
+static int thc63_gpio_init(struct thc63_dev *thc63)
+{
+	thc63->oe = devm_gpiod_get_optional(thc63->dev, "oe", GPIOD_OUT_LOW);
+	if (IS_ERR(thc63->oe)) {
+		dev_err(thc63->dev, "Unable to get \"oe-gpios\": %ld\n",
+			PTR_ERR(thc63->oe));
+		return PTR_ERR(thc63->oe);
+	}
+
+	thc63->pdwn = devm_gpiod_get_optional(thc63->dev, "powerdown",
+					      GPIOD_OUT_HIGH);
+	if (IS_ERR(thc63->pdwn)) {
+		dev_err(thc63->dev, "Unable to get \"powerdown-gpios\": %ld\n",
+			PTR_ERR(thc63->pdwn));
+		return PTR_ERR(thc63->pdwn);
+	}
+
+	return 0;
+}
+
+static int thc63_probe(struct platform_device *pdev)
+{
+	struct thc63_dev *thc63;
+	int ret;
+
+	thc63 = devm_kzalloc(&pdev->dev, sizeof(*thc63), GFP_KERNEL);
+	if (!thc63)
+		return -ENOMEM;
+
+	thc63->dev = &pdev->dev;
+	platform_set_drvdata(pdev, thc63);
+
+	thc63->vcc = devm_regulator_get_optional(thc63->dev, "vcc");
+	if (IS_ERR(thc63->vcc)) {
+		if (PTR_ERR(thc63->vcc) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
+		dev_err(thc63->dev, "Unable to get \"vcc\" supply: %ld\n",
+			PTR_ERR(thc63->vcc));
+		return PTR_ERR(thc63->vcc);
+	}
+
+	ret = thc63_gpio_init(thc63);
+	if (ret)
+		return ret;
+
+	ret = thc63_parse_dt(thc63);
+	if (ret)
+		return ret;
+
+	thc63->bridge.driver_private = thc63;
+	thc63->bridge.of_node = pdev->dev.of_node;
+	thc63->bridge.funcs = &thc63_bridge_func;
+
+	drm_bridge_add(&thc63->bridge);
+
+	return 0;
+}
+
+static int thc63_remove(struct platform_device *pdev)
+{
+	struct thc63_dev *thc63 = platform_get_drvdata(pdev);
+
+	drm_bridge_remove(&thc63->bridge);
+
+	return 0;
+}
+
+static const struct of_device_id thc63_match[] = {
+	{ .compatible = "thine,thc63lvd1024", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, thc63_match);
+
+static struct platform_driver thc63_driver = {
+	.probe	= thc63_probe,
+	.remove	= thc63_remove,
+	.driver	= {
+		.name		= "thc63lvd1024",
+		.of_match_table	= thc63_match,
+	},
+};
+module_platform_driver(thc63_driver);
+
+MODULE_AUTHOR("Jacopo Mondi <jacopo@jmondi.org>");
+MODULE_DESCRIPTION("Thine THC63LVD1024 LVDS decoder DRM bridge driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [PATCH v9 1/2] dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder
  2018-04-18 14:40   ` [PATCH v9 1/2] dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder Jacopo Mondi
@ 2018-04-20  6:19     ` Vladimir Zapolskiy
  0 siblings, 0 replies; 6+ messages in thread
From: Vladimir Zapolskiy @ 2018-04-20  6:19 UTC (permalink / raw)
  To: Jacopo Mondi, architt, a.hajda, Laurent.pinchart, airlied, horms,
	magnus.damm, geert, niklas.soderlund, sergei.shtylyov, robh+dt,
	mark.rutland
  Cc: dri-devel, linux-renesas-soc, devicetree, linux-kernel

Hi Jacopo,

On 04/18/2018 05:40 PM, Jacopo Mondi wrote:
> Document Thine THC63LVD1024 LVDS decoder device tree bindings.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
>  .../bindings/display/bridge/thine,thc63lvd1024.txt | 60 ++++++++++++++++++++++
>  1 file changed, 60 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
> 

Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>

--
With best wishes,
Vladimir

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v9 2/2] drm: bridge: Add thc63lvd1024 LVDS decoder driver
  2018-04-18 14:40   ` [PATCH v9 2/2] drm: bridge: Add thc63lvd1024 LVDS decoder driver Jacopo Mondi
@ 2018-04-20  6:20     ` Vladimir Zapolskiy
  0 siblings, 0 replies; 6+ messages in thread
From: Vladimir Zapolskiy @ 2018-04-20  6:20 UTC (permalink / raw)
  To: Jacopo Mondi, architt, a.hajda, Laurent.pinchart, airlied, horms,
	magnus.damm, geert, niklas.soderlund, sergei.shtylyov, robh+dt,
	mark.rutland
  Cc: dri-devel, linux-renesas-soc, devicetree, linux-kernel

Hi Jacopo,

On 04/18/2018 05:40 PM, Jacopo Mondi wrote:
> Add DRM bridge driver for Thine THC63LVD1024 LVDS to digital parallel
> output converter.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
>  drivers/gpu/drm/bridge/Kconfig        |   6 +
>  drivers/gpu/drm/bridge/Makefile       |   1 +
>  drivers/gpu/drm/bridge/thc63lvd1024.c | 206 ++++++++++++++++++++++++++++++++++
>  3 files changed, 213 insertions(+)
>  create mode 100644 drivers/gpu/drm/bridge/thc63lvd1024.c

Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>

--
With best wishes,
Vladimir

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v9 0/2] drm: Add Thine THC63LVD1024 LVDS decoder bridge
  2018-04-18 14:40 ` [PATCH v9 0/2] drm: Add Thine THC63LVD1024 LVDS decoder bridge Jacopo Mondi
  2018-04-18 14:40   ` [PATCH v9 1/2] dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder Jacopo Mondi
  2018-04-18 14:40   ` [PATCH v9 2/2] drm: bridge: Add thc63lvd1024 LVDS decoder driver Jacopo Mondi
@ 2018-04-20  9:18   ` Andrzej Hajda
  2 siblings, 0 replies; 6+ messages in thread
From: Andrzej Hajda @ 2018-04-20  9:18 UTC (permalink / raw)
  To: Jacopo Mondi, architt, Laurent.pinchart, airlied,
	vladimir_zapolskiy, horms, magnus.damm, geert, niklas.soderlund,
	sergei.shtylyov, robh+dt, mark.rutland
  Cc: dri-devel, linux-renesas-soc, devicetree, linux-kernel

On 18.04.2018 16:40, Jacopo Mondi wrote:
> As I have another series which is based on this one + Eagle board display
> support, I'm re-sending this one to fix the small issue I pointed out in my
> reply to v8.
>
> Simon: no changes to Eagle DTS series, so the last one sent is still the good
> one.
>
> DRM: I have collected several reviewed-by tags both on driver and bindings.
> Can I send out incremental patches on this series and consider this one to
> be ready to be collected?

Queued to drm-misc-next.

Regards
Andrzej


>
> Thanks
>    j
>
> v8 -> v9:
> - Put 'remote' OF node after usage not just in error path during device
>   tree parsing routine
> - Add Rob's Reviewed-by tag to the device tree bindings documentation
>
> v7 -> b8:
> - Make 'vcc' supply mandatory
> - Use 'oe' property name to describe "OE" pin
> - Minor fixes as suggested by Laurent on bindings and driver
>
> v6 -> v7:
> - Use semi-standard names for powerdown and output enable GPIOs as suggested
>   by Rob and Vladimir
> - Use 'regulator_get()' not the optional version, and list only 'vcc' as
>   requested supply
> - Addressed Laurent's review comments and removed Eagle display enablement patch
>   to be sent separately
>
> v5 -> v6:
> - Drop check for CONFIG_OF as it is a Kconfig dependency
> - Add Niklas Reviewed-by tags
> - List [3/3] depenencies below commit message to ease integration
>
> v4 -> v5:
> - Fix punctuation in bindings documentation
> - Add small statement to bindings document to clarify the chip has no
>   control bus
> - Print regulator name in enable/disable routines error path
> - Add Andrzej Reviewed-by tag
>
> v3 -> v4:
> - Rename permutations of "pdwn" to just "pdwn" everywhere in the series
> - Improve power enable/disable routines as suggested by Andrzej and Sergei
> - Change "pdwn" gpio initialization to use the logical output level
> - Change Kconfig description
>
> v2 -> v3:
> - Drop support for "lvds-decoder" and make the driver THC63LVD1024 specific
> -- Rework bindings to describe multiple input/output ports
> -- Rename driver and remove "lvds-decoder" references
> -- Rework Eagle DTS to use new bindings
>
> v1 -> v2:
> - Drop support for THC63LVD1024
>
> Jacopo Mondi (2):
>   dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder
>   drm: bridge: Add thc63lvd1024 LVDS decoder driver
>
>  .../bindings/display/bridge/thine,thc63lvd1024.txt |  60 ++++++
>  drivers/gpu/drm/bridge/Kconfig                     |   6 +
>  drivers/gpu/drm/bridge/Makefile                    |   1 +
>  drivers/gpu/drm/bridge/thc63lvd1024.c              | 205 +++++++++++++++++++++
>  4 files changed, 272 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
>  create mode 100644 drivers/gpu/drm/bridge/thc63lvd1024.c
>
> --
> 2.7.4
>
>
>
>

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2018-04-20  9:18 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <CGME20180418144054epcas5p3ec7816f76cd84d4c429b47e23331ee7d@epcas5p3.samsung.com>
2018-04-18 14:40 ` [PATCH v9 0/2] drm: Add Thine THC63LVD1024 LVDS decoder bridge Jacopo Mondi
2018-04-18 14:40   ` [PATCH v9 1/2] dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder Jacopo Mondi
2018-04-20  6:19     ` Vladimir Zapolskiy
2018-04-18 14:40   ` [PATCH v9 2/2] drm: bridge: Add thc63lvd1024 LVDS decoder driver Jacopo Mondi
2018-04-20  6:20     ` Vladimir Zapolskiy
2018-04-20  9:18   ` [PATCH v9 0/2] drm: Add Thine THC63LVD1024 LVDS decoder bridge Andrzej Hajda

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).