From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.1 required=3.0 tests=DKIM_INVALID,DKIM_SIGNED, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY, SPF_HELO_NONE,SPF_PASS,USER_AGENT_SANE_1 autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 46E83C433E0 for ; Mon, 18 May 2020 18:10:27 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 0AA1520671 for ; Mon, 18 May 2020 18:10:27 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (2048-bit key) header.d=earth.li header.i=@earth.li header.b="O9dZDvVb" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2387557AbgERSK0 (ORCPT ); Mon, 18 May 2020 14:10:26 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:36040 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1732991AbgERSKY (ORCPT ); Mon, 18 May 2020 14:10:24 -0400 X-Greylist: delayed 65 seconds by postgrey-1.37 at lindbergh.monkeyblade.net; Mon, 18 May 2020 11:10:23 PDT Received: from the.earth.li (the.earth.li [IPv6:2a00:1098:86:4d:c0ff:ee:15:900d]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id DC736C061A0C; Mon, 18 May 2020 11:10:23 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=earth.li; s=the; h=In-Reply-To:Content-Type:MIME-Version:References:Message-ID:Subject :To:From:Date:Sender:Reply-To:Cc:Content-Transfer-Encoding:Content-ID: Content-Description:Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc :Resent-Message-ID:List-Id:List-Help:List-Unsubscribe:List-Subscribe: List-Post:List-Owner:List-Archive; bh=AbyQlLTgT9N6dnHMOx2feZtNUM31THpZV6Gi5OUra7o=; b=O9dZDvVbze5d5QwrWR1VB6dsos Jvr+FLendqrn2L8zU0c+3f6G/zEqbmrUsAyAVL6+3sANjzvL2zae6NA4TSVDnqPuHc55+lmzPbzTA MtR/4F3WzgjFkJfgdsKrxF6WL0bC22GzbrrcN/1IEEea58rlzCi3oirGz1JSk4Nu6azPVxhkFnDr6 rU3tuoLDcf7qBzBH8PX6/cGLZ2eCyuBq7OtAv+YwKvvt1ec8/JjWMmPvSCs3qDNbJQbF8y9M5TQnW ggyGwKVDwnwQrV2SueCO9f6U6Z8juHmKtwdysx3zkwoF4ezFQrk4RVKcyVnXa+3dXj9H6FzxDApjE J7LqM/bA==; Received: from [2001:4d48:ad59:1409:4::2] (helo=youmian.o362.us) by the.earth.li with esmtpsa (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1jakDW-0008Ou-Le; Mon, 18 May 2020 19:10:22 +0100 Date: Mon, 18 May 2020 19:10:14 +0100 From: Jonathan McDowell To: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 3/3] ARM: dts: qcom: Add MikroTik RB3011 Message-ID: <75390e66c9e6e36ddd42dc7f54cac28dfd7a24b9.1589824955.git.noodles@earth.li> References: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.10.1 (2018-07-13) Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch adds a DTS file for the MikroTik RouterBoard 3011, which is a 1U rackmount router based on the IPQ8064, supporting the serial UART, dual QCA8337 Gigabit ethernet switches, boot loader NOR and user LED device. Signed-off-by: Jonathan McDowell --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 308 ++++++++++++++++++++++ 2 files changed, 309 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-ipq8064-rb3011.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e8dd99201397..e697a4bd7426 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -884,6 +884,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq4019-ap.dk07.1-c1.dtb \ qcom-ipq4019-ap.dk07.1-c2.dtb \ qcom-ipq8064-ap148.dtb \ + qcom-ipq8064-rb3011.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8974-fairphone-fp2.dtb \ diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts new file mode 100644 index 000000000000..282b89ce3d45 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts @@ -0,0 +1,308 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-ipq8064.dtsi" +#include + +/ { + model = "MikroTik RB3011UiAS-RM"; + compatible = "mikrotik,rb3011"; + + aliases { + serial0 = &gsbi7_serial; + ethernet0 = &gmac0; + ethernet1 = &gmac3; + mdio-gpio0 = &mdio0; + mdio-gpio1 = &mdio1; + }; + + chosen { + bootargs = "loglevel=8 console=ttyMSM0,115200"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + reg = <0x42000000 0x3e000000>; + device_type = "memory"; + }; + + mdio0: mdio@0 { + status = "okay"; + compatible = "virtual,mdio-gpio"; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, + <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + switch0: switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + + dsa,member = <0 0>; + + pinctrl-0 = <&sw0_reset_pin>; + pinctrl-names = "default"; + + reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + switch0cpu: port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "sw1"; + }; + + port@2 { + reg = <2>; + label = "sw2"; + }; + + port@3 { + reg = <3>; + label = "sw3"; + }; + + port@4 { + reg = <4>; + label = "sw4"; + }; + + port@5 { + reg = <5>; + label = "sw5"; + }; + }; + }; + }; + + mdio1: mdio@1 { + status = "okay"; + compatible = "virtual,mdio-gpio"; + gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>, + <&qcom_pinmux 10 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&mdio1_pins>; + pinctrl-names = "default"; + + switch1: switch@14 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + + dsa,member = <1 0>; + + pinctrl-0 = <&sw1_reset_pin>; + pinctrl-names = "default"; + + reset-gpios = <&qcom_pinmux 17 GPIO_ACTIVE_LOW>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + switch1cpu: port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac3>; + phy-mode = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "sw6"; + }; + + port@2 { + reg = <2>; + label = "sw7"; + }; + + port@3 { + reg = <3>; + label = "sw8"; + }; + + port@4 { + reg = <4>; + label = "sw9"; + }; + + port@5 { + reg = <5>; + label = "sw10"; + }; + }; + }; + }; + + soc { + gsbi5: gsbi@1a200000 { + qcom,mode = ; + status = "okay"; + + spi4: spi@1a280000 { + status = "okay"; + spi-max-frequency = <50000000>; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; + + norflash: s25fl016k@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + partition@0 { + label = "RouterBoot"; + reg = <0x0 0x40000>; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-0 = <&buttons_pins>; + pinctrl-names = "default"; + + button@1 { + label = "reset"; + linux,code = ; + gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&leds_pins>; + pinctrl-names = "default"; + + led@7 { + label = "rb3011:green:user"; + gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + }; +}; + +&gmac0 { + status = "okay"; + + phy-mode = "rgmii"; + qcom,id = <0>; + phy-handle = <&switch0cpu>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gmac3 { + status = "okay"; + + phy-mode = "sgmii"; + qcom,id = <3>; + phy-handle = <&switch1cpu>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gsbi7 { + status = "okay"; + qcom,mode = ; +}; + +&gsbi7_serial { + status = "okay"; +}; + +&qcom_pinmux { + buttons_pins: buttons_pins { + mux { + pins = "gpio66"; + drive-strength = <16>; + bias-disable; + }; + }; + + leds_pins: leds_pins { + mux { + pins = "gpio33"; + drive-strength = <16>; + bias-disable; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + mdio1_pins: mdio1_pins { + mux { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + sw0_reset_pin: sw0_reset_pin { + mux { + pins = "gpio16"; + drive-strength = <16>; + function = "gpio"; + bias-disable; + input-disable; + }; + }; + + sw1_reset_pin: sw1_reset_pin { + mux { + pins = "gpio17"; + drive-strength = <16>; + function = "gpio"; + bias-disable; + input-disable; + }; + }; +}; -- 2.20.1