[PATCH 0/3] Remove drivers used by EZChip NPS platform

[PATCH 0/3] Remove drivers used by EZChip NPS platform

[Vineet Gupta]

This series removes any drivers associated with EZChip NPS platform
which was removed from ARC in 5.10-rc1.

Vineet Gupta (3):
  drivers/clocksource: Remove EZChip NPS clocksource driver
  drivers/irqchip: Remove EZChip NPS interrupt controller
  include/soc: remove headers for EZChip NPS

 drivers/clocksource/Kconfig     |  10 --
 drivers/clocksource/Makefile    |   1 -
 drivers/clocksource/timer-nps.c | 284 --------------------------------
 drivers/irqchip/Kconfig         |   7 -
 drivers/irqchip/Makefile        |   1 -
 drivers/irqchip/irq-eznps.c     | 165 -------------------
 include/soc/nps/common.h        | 172 -------------------
 include/soc/nps/mtm.h           |  59 -------
 8 files changed, 699 deletions(-)
 delete mode 100644 drivers/clocksource/timer-nps.c
 delete mode 100644 drivers/irqchip/irq-eznps.c
 delete mode 100644 include/soc/nps/common.h
 delete mode 100644 include/soc/nps/mtm.h

-- 
2.25.1

[PATCH 1/3] drivers/clocksource: Remove EZChip NPS clocksource driver

[Vineet Gupta]

NPS platform has been removed from ARC port and there are no in-tree
users of it now. So RIP !

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
---
 drivers/clocksource/Kconfig     |  10 --
 drivers/clocksource/Makefile    |   1 -
 drivers/clocksource/timer-nps.c | 284 --------------------------------
 3 files changed, 295 deletions(-)
 delete mode 100644 drivers/clocksource/timer-nps.c

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 68b087bff59c..390c27cd926d 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -275,16 +275,6 @@ config CLKSRC_TI_32K
 	  This option enables support for Texas Instruments 32.768 Hz clocksource
 	  available on many OMAP-like platforms.
 
-config CLKSRC_NPS
-	bool "NPS400 clocksource driver" if COMPILE_TEST
-	depends on !PHYS_ADDR_T_64BIT
-	select CLKSRC_MMIO
-	select TIMER_OF if OF
-	help
-	  NPS400 clocksource support.
-	  It has a 64-bit counter with update rate up to 1000MHz.
-	  This counter is accessed via couple of 32-bit memory-mapped registers.
-
 config CLKSRC_STM32
 	bool "Clocksource for STM32 SoCs" if !ARCH_STM32
 	depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 1c444cc3bb44..3c75cbbf8533 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -56,7 +56,6 @@ obj-$(CONFIG_CLKSRC_QCOM)	+= timer-qcom.o
 obj-$(CONFIG_MTK_TIMER)		+= timer-mediatek.o
 obj-$(CONFIG_CLKSRC_PISTACHIO)	+= timer-pistachio.o
 obj-$(CONFIG_CLKSRC_TI_32K)	+= timer-ti-32k.o
-obj-$(CONFIG_CLKSRC_NPS)	+= timer-nps.o
 obj-$(CONFIG_OXNAS_RPS_TIMER)	+= timer-oxnas-rps.o
 obj-$(CONFIG_OWL_TIMER)		+= timer-owl.o
 obj-$(CONFIG_MILBEAUT_TIMER)	+= timer-milbeaut.o
diff --git a/drivers/clocksource/timer-nps.c b/drivers/clocksource/timer-nps.c
deleted file mode 100644
index 7b6bb0df96ae..000000000000
--- a/drivers/clocksource/timer-nps.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Copyright (c) 2016, Mellanox Technologies. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/interrupt.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/cpu.h>
-#include <soc/nps/common.h>
-
-#define NPS_MSU_TICK_LOW	0xC8
-#define NPS_CLUSTER_OFFSET	8
-#define NPS_CLUSTER_NUM		16
-
-/* This array is per cluster of CPUs (Each NPS400 cluster got 256 CPUs) */
-static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly;
-
-static int __init nps_get_timer_clk(struct device_node *node,
-			     unsigned long *timer_freq,
-			     struct clk **clk)
-{
-	int ret;
-
-	*clk = of_clk_get(node, 0);
-	ret = PTR_ERR_OR_ZERO(*clk);
-	if (ret) {
-		pr_err("timer missing clk\n");
-		return ret;
-	}
-
-	ret = clk_prepare_enable(*clk);
-	if (ret) {
-		pr_err("Couldn't enable parent clk\n");
-		clk_put(*clk);
-		return ret;
-	}
-
-	*timer_freq = clk_get_rate(*clk);
-	if (!(*timer_freq)) {
-		pr_err("Couldn't get clk rate\n");
-		clk_disable_unprepare(*clk);
-		clk_put(*clk);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static u64 nps_clksrc_read(struct clocksource *clksrc)
-{
-	int cluster = raw_smp_processor_id() >> NPS_CLUSTER_OFFSET;
-
-	return (u64)ioread32be(nps_msu_reg_low_addr[cluster]);
-}
-
-static int __init nps_setup_clocksource(struct device_node *node)
-{
-	int ret, cluster;
-	struct clk *clk;
-	unsigned long nps_timer1_freq;
-
-
-	for (cluster = 0; cluster < NPS_CLUSTER_NUM; cluster++)
-		nps_msu_reg_low_addr[cluster] =
-			nps_host_reg((cluster << NPS_CLUSTER_OFFSET),
-				     NPS_MSU_BLKID, NPS_MSU_TICK_LOW);
-
-	ret = nps_get_timer_clk(node, &nps_timer1_freq, &clk);
-	if (ret)
-		return ret;
-
-	ret = clocksource_mmio_init(nps_msu_reg_low_addr, "nps-tick",
-				    nps_timer1_freq, 300, 32, nps_clksrc_read);
-	if (ret) {
-		pr_err("Couldn't register clock source.\n");
-		clk_disable_unprepare(clk);
-	}
-
-	return ret;
-}
-
-TIMER_OF_DECLARE(ezchip_nps400_clksrc, "ezchip,nps400-timer",
-		       nps_setup_clocksource);
-TIMER_OF_DECLARE(ezchip_nps400_clk_src, "ezchip,nps400-timer1",
-		       nps_setup_clocksource);
-
-#ifdef CONFIG_EZNPS_MTM_EXT
-#include <soc/nps/mtm.h>
-
-/* Timer related Aux registers */
-#define NPS_REG_TIMER0_TSI	0xFFFFF850
-#define NPS_REG_TIMER0_LIMIT	0x23
-#define NPS_REG_TIMER0_CTRL	0x22
-#define NPS_REG_TIMER0_CNT	0x21
-
-/*
- * Interrupt Enabled (IE) - re-arm the timer
- * Not Halted (NH) - is cleared when working with JTAG (for debug)
- */
-#define TIMER0_CTRL_IE		BIT(0)
-#define TIMER0_CTRL_NH		BIT(1)
-
-static unsigned long nps_timer0_freq;
-static unsigned long nps_timer0_irq;
-
-static void nps_clkevent_rm_thread(void)
-{
-	int thread;
-	unsigned int cflags, enabled_threads;
-
-	hw_schd_save(&cflags);
-
-	enabled_threads = read_aux_reg(NPS_REG_TIMER0_TSI);
-
-	/* remove thread from TSI1 */
-	thread = read_aux_reg(CTOP_AUX_THREAD_ID);
-	enabled_threads &= ~(1 << thread);
-	write_aux_reg(NPS_REG_TIMER0_TSI, enabled_threads);
-
-	/* Acknowledge and if needed re-arm the timer */
-	if (!enabled_threads)
-		write_aux_reg(NPS_REG_TIMER0_CTRL, TIMER0_CTRL_NH);
-	else
-		write_aux_reg(NPS_REG_TIMER0_CTRL,
-			      TIMER0_CTRL_IE | TIMER0_CTRL_NH);
-
-	hw_schd_restore(cflags);
-}
-
-static void nps_clkevent_add_thread(unsigned long delta)
-{
-	int thread;
-	unsigned int cflags, enabled_threads;
-
-	hw_schd_save(&cflags);
-
-	/* add thread to TSI1 */
-	thread = read_aux_reg(CTOP_AUX_THREAD_ID);
-	enabled_threads = read_aux_reg(NPS_REG_TIMER0_TSI);
-	enabled_threads |= (1 << thread);
-	write_aux_reg(NPS_REG_TIMER0_TSI, enabled_threads);
-
-	/* set next timer event */
-	write_aux_reg(NPS_REG_TIMER0_LIMIT, delta);
-	write_aux_reg(NPS_REG_TIMER0_CNT, 0);
-	write_aux_reg(NPS_REG_TIMER0_CTRL,
-		      TIMER0_CTRL_IE | TIMER0_CTRL_NH);
-
-	hw_schd_restore(cflags);
-}
-
-/*
- * Whenever anyone tries to change modes, we just mask interrupts
- * and wait for the next event to get set.
- */
-static int nps_clkevent_set_state(struct clock_event_device *dev)
-{
-	nps_clkevent_rm_thread();
-	disable_percpu_irq(nps_timer0_irq);
-
-	return 0;
-}
-
-static int nps_clkevent_set_next_event(unsigned long delta,
-				       struct clock_event_device *dev)
-{
-	nps_clkevent_add_thread(delta);
-	enable_percpu_irq(nps_timer0_irq, IRQ_TYPE_NONE);
-
-	return 0;
-}
-
-static DEFINE_PER_CPU(struct clock_event_device, nps_clockevent_device) = {
-	.name				=	"NPS Timer0",
-	.features			=	CLOCK_EVT_FEAT_ONESHOT,
-	.rating				=	300,
-	.set_next_event			=	nps_clkevent_set_next_event,
-	.set_state_oneshot		=	nps_clkevent_set_state,
-	.set_state_oneshot_stopped	=	nps_clkevent_set_state,
-	.set_state_shutdown		=	nps_clkevent_set_state,
-	.tick_resume			=	nps_clkevent_set_state,
-};
-
-static irqreturn_t timer_irq_handler(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	nps_clkevent_rm_thread();
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static int nps_timer_starting_cpu(unsigned int cpu)
-{
-	struct clock_event_device *evt = this_cpu_ptr(&nps_clockevent_device);
-
-	evt->cpumask = cpumask_of(smp_processor_id());
-
-	clockevents_config_and_register(evt, nps_timer0_freq, 0, ULONG_MAX);
-	enable_percpu_irq(nps_timer0_irq, IRQ_TYPE_NONE);
-
-	return 0;
-}
-
-static int nps_timer_dying_cpu(unsigned int cpu)
-{
-	disable_percpu_irq(nps_timer0_irq);
-	return 0;
-}
-
-static int __init nps_setup_clockevent(struct device_node *node)
-{
-	struct clk *clk;
-	int ret;
-
-	nps_timer0_irq = irq_of_parse_and_map(node, 0);
-	if (nps_timer0_irq <= 0) {
-		pr_err("clockevent: missing irq\n");
-		return -EINVAL;
-	}
-
-	ret = nps_get_timer_clk(node, &nps_timer0_freq, &clk);
-	if (ret)
-		return ret;
-
-	/* Needs apriori irq_set_percpu_devid() done in intc map function */
-	ret = request_percpu_irq(nps_timer0_irq, timer_irq_handler,
-				 "Timer0 (per-cpu-tick)",
-				 &nps_clockevent_device);
-	if (ret) {
-		pr_err("Couldn't request irq\n");
-		clk_disable_unprepare(clk);
-		return ret;
-	}
-
-	ret = cpuhp_setup_state(CPUHP_AP_ARC_TIMER_STARTING,
-				"clockevents/nps:starting",
-				nps_timer_starting_cpu,
-				nps_timer_dying_cpu);
-	if (ret) {
-		pr_err("Failed to setup hotplug state\n");
-		clk_disable_unprepare(clk);
-		free_percpu_irq(nps_timer0_irq, &nps_clockevent_device);
-		return ret;
-	}
-
-	return 0;
-}
-
-TIMER_OF_DECLARE(ezchip_nps400_clk_evt, "ezchip,nps400-timer0",
-		       nps_setup_clockevent);
-#endif /* CONFIG_EZNPS_MTM_EXT */
-- 
2.25.1

[PATCH 2/3] drivers/irqchip: Remove EZChip NPS interrupt controller

[Vineet Gupta]

NPS platform has been removed from ARC port and there are no in-tree
users of it now. So RIP !

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <maz@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
---
 drivers/irqchip/Kconfig     |   7 --
 drivers/irqchip/Makefile    |   1 -
 drivers/irqchip/irq-eznps.c | 165 ------------------------------------
 3 files changed, 173 deletions(-)
 delete mode 100644 drivers/irqchip/irq-eznps.c

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index c6098eee0c7c..7920c3a3017d 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -389,13 +389,6 @@ config LS_SCFG_MSI
 config PARTITION_PERCPU
 	bool
 
-config EZNPS_GIC
-	bool "NPS400 Global Interrupt Manager (GIM)"
-	depends on ARC || (COMPILE_TEST && !64BIT)
-	select IRQ_DOMAIN
-	help
-	  Support the EZchip NPS400 global interrupt controller
-
 config STM32_EXTI
 	bool
 	select IRQ_DOMAIN
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 94c2885882ee..0ac93bfaec61 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -86,7 +86,6 @@ obj-$(CONFIG_MVEBU_PIC)			+= irq-mvebu-pic.o
 obj-$(CONFIG_MVEBU_SEI)			+= irq-mvebu-sei.o
 obj-$(CONFIG_LS_EXTIRQ)			+= irq-ls-extirq.o
 obj-$(CONFIG_LS_SCFG_MSI)		+= irq-ls-scfg-msi.o
-obj-$(CONFIG_EZNPS_GIC)			+= irq-eznps.o
 obj-$(CONFIG_ARCH_ASPEED)		+= irq-aspeed-vic.o irq-aspeed-i2c-ic.o irq-aspeed-scu-ic.o
 obj-$(CONFIG_STM32_EXTI) 		+= irq-stm32-exti.o
 obj-$(CONFIG_QCOM_IRQ_COMBINER)		+= qcom-irq-combiner.o
diff --git a/drivers/irqchip/irq-eznps.c b/drivers/irqchip/irq-eznps.c
deleted file mode 100644
index 2a7a38830a8d..000000000000
--- a/drivers/irqchip/irq-eznps.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * Copyright (c) 2016, Mellanox Technologies. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/irqchip.h>
-#include <soc/nps/common.h>
-
-#define NPS_NR_CPU_IRQS 8  /* number of interrupt lines of NPS400 CPU */
-#define NPS_TIMER0_IRQ  3
-
-/*
- * NPS400 core includes an Interrupt Controller (IC) support.
- * All cores can deactivate level irqs at first level control
- * at cores mesh layer called MTM.
- * For devices out side chip e.g. uart, network there is another
- * level called Global Interrupt Manager (GIM).
- * This second level can control level and edge interrupt.
- *
- * NOTE: AUX_IENABLE and CTOP_AUX_IACK are auxiliary registers
- * with private HW copy per CPU.
- */
-
-static void nps400_irq_mask(struct irq_data *irqd)
-{
-	unsigned int ienb;
-	unsigned int irq = irqd_to_hwirq(irqd);
-
-	ienb = read_aux_reg(AUX_IENABLE);
-	ienb &= ~(1 << irq);
-	write_aux_reg(AUX_IENABLE, ienb);
-}
-
-static void nps400_irq_unmask(struct irq_data *irqd)
-{
-	unsigned int ienb;
-	unsigned int irq = irqd_to_hwirq(irqd);
-
-	ienb = read_aux_reg(AUX_IENABLE);
-	ienb |= (1 << irq);
-	write_aux_reg(AUX_IENABLE, ienb);
-}
-
-static void nps400_irq_eoi_global(struct irq_data *irqd)
-{
-	unsigned int __maybe_unused irq = irqd_to_hwirq(irqd);
-
-	write_aux_reg(CTOP_AUX_IACK, 1 << irq);
-
-	/* Don't ack GIC before all device access attempts are done */
-	mb();
-
-	nps_ack_gic();
-}
-
-static void nps400_irq_ack(struct irq_data *irqd)
-{
-	unsigned int __maybe_unused irq = irqd_to_hwirq(irqd);
-
-	write_aux_reg(CTOP_AUX_IACK, 1 << irq);
-}
-
-static struct irq_chip nps400_irq_chip_fasteoi = {
-	.name		= "NPS400 IC Global",
-	.irq_mask	= nps400_irq_mask,
-	.irq_unmask	= nps400_irq_unmask,
-	.irq_eoi	= nps400_irq_eoi_global,
-};
-
-static struct irq_chip nps400_irq_chip_percpu = {
-	.name		= "NPS400 IC",
-	.irq_mask	= nps400_irq_mask,
-	.irq_unmask	= nps400_irq_unmask,
-	.irq_ack	= nps400_irq_ack,
-};
-
-static int nps400_irq_map(struct irq_domain *d, unsigned int virq,
-			  irq_hw_number_t hw)
-{
-	switch (hw) {
-	case NPS_TIMER0_IRQ:
-#ifdef CONFIG_SMP
-	case NPS_IPI_IRQ:
-#endif
-		irq_set_percpu_devid(virq);
-		irq_set_chip_and_handler(virq, &nps400_irq_chip_percpu,
-					 handle_percpu_devid_irq);
-		break;
-	default:
-		irq_set_chip_and_handler(virq, &nps400_irq_chip_fasteoi,
-					 handle_fasteoi_irq);
-		break;
-	}
-
-	return 0;
-}
-
-static const struct irq_domain_ops nps400_irq_ops = {
-	.xlate = irq_domain_xlate_onecell,
-	.map = nps400_irq_map,
-};
-
-static int __init nps400_of_init(struct device_node *node,
-				 struct device_node *parent)
-{
-	struct irq_domain *nps400_root_domain;
-
-	if (parent) {
-		pr_err("DeviceTree incore ic not a root irq controller\n");
-		return -EINVAL;
-	}
-
-	nps400_root_domain = irq_domain_add_linear(node, NPS_NR_CPU_IRQS,
-						   &nps400_irq_ops, NULL);
-
-	if (!nps400_root_domain) {
-		pr_err("nps400 root irq domain not avail\n");
-		return -ENOMEM;
-	}
-
-	/*
-	 * Needed for primary domain lookup to succeed
-	 * This is a primary irqchip, and can never have a parent
-	 */
-	irq_set_default_host(nps400_root_domain);
-
-#ifdef CONFIG_SMP
-	irq_create_mapping(nps400_root_domain, NPS_IPI_IRQ);
-#endif
-
-	return 0;
-}
-IRQCHIP_DECLARE(ezchip_nps400_ic, "ezchip,nps400-ic", nps400_of_init);
-- 
2.25.1

[PATCH 3/3] include/soc: remove headers for EZChip NPS

[Vineet Gupta]

NPS platform has been removed from ARC port and there are no in-tree
user of it now . So RIP !

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
---
 include/soc/nps/common.h | 172 ---------------------------------------
 include/soc/nps/mtm.h    |  59 --------------
 2 files changed, 231 deletions(-)
 delete mode 100644 include/soc/nps/common.h
 delete mode 100644 include/soc/nps/mtm.h

diff --git a/include/soc/nps/common.h b/include/soc/nps/common.h
deleted file mode 100644
index 8c18dc6d3fde..000000000000
--- a/include/soc/nps/common.h
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Copyright (c) 2016, Mellanox Technologies. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef SOC_NPS_COMMON_H
-#define SOC_NPS_COMMON_H
-
-#ifdef CONFIG_SMP
-#define NPS_IPI_IRQ					5
-#endif
-
-#define NPS_HOST_REG_BASE			0xF6000000
-
-#define NPS_MSU_BLKID				0x018
-
-#define CTOP_INST_RSPI_GIC_0_R12		0x3C56117E
-#define CTOP_INST_MOV2B_FLIP_R3_B1_B2_INST	0x5B60
-#define CTOP_INST_MOV2B_FLIP_R3_B1_B2_LIMM	0x00010422
-
-#ifndef AUX_IENABLE
-#define AUX_IENABLE				0x40c
-#endif
-
-#define CTOP_AUX_IACK				(0xFFFFF800 + 0x088)
-
-#ifndef __ASSEMBLY__
-
-/* In order to increase compilation test coverage */
-#ifdef CONFIG_ARC
-static inline void nps_ack_gic(void)
-{
-	__asm__ __volatile__ (
-	"       .word %0\n"
-	:
-	: "i"(CTOP_INST_RSPI_GIC_0_R12)
-	: "memory");
-}
-#else
-static inline void nps_ack_gic(void) { }
-#define write_aux_reg(r, v)
-#define read_aux_reg(r) 0
-#endif
-
-/* CPU global ID */
-struct global_id {
-	union {
-		struct {
-#ifdef CONFIG_EZNPS_MTM_EXT
-			u32 __reserved:20, cluster:4, core:4, thread:4;
-#else
-			u32 __reserved:24, cluster:4, core:4;
-#endif
-		};
-		u32 value;
-	};
-};
-
-/*
- * Convert logical to physical CPU IDs
- *
- * The conversion swap bits 1 and 2 of cluster id (out of 4 bits)
- * Now quad of logical clusters id's are adjacent physically,
- * and not like the id's physically came with each cluster.
- * Below table is 4x4 mesh of core clusters as it layout on chip.
- * Cluster ids are in format: logical (physical)
- *
- *    -----------------   ------------------
- * 3 |  5 (3)   7 (7)  | | 13 (11)   15 (15)|
- *
- * 2 |  4 (2)   6 (6)  | | 12 (10)   14 (14)|
- *    -----------------   ------------------
- * 1 |  1 (1)   3 (5)  | |  9  (9)   11 (13)|
- *
- * 0 |  0 (0)   2 (4)  | |  8  (8)   10 (12)|
- *    -----------------   ------------------
- *       0       1            2        3
- */
-static inline int nps_cluster_logic_to_phys(int cluster)
-{
-#ifdef __arc__
-	 __asm__ __volatile__(
-	"       mov r3,%0\n"
-	"       .short %1\n"
-	"       .word %2\n"
-	"       mov %0,r3\n"
-	: "+r"(cluster)
-	: "i"(CTOP_INST_MOV2B_FLIP_R3_B1_B2_INST),
-	  "i"(CTOP_INST_MOV2B_FLIP_R3_B1_B2_LIMM)
-	: "r3");
-#endif
-
-	return cluster;
-}
-
-#define NPS_CPU_TO_CLUSTER_NUM(cpu) \
-	({ struct global_id gid; gid.value = cpu; \
-		nps_cluster_logic_to_phys(gid.cluster); })
-
-struct nps_host_reg_address {
-	union {
-		struct {
-			u32 base:8, cl_x:4, cl_y:4,
-			blkid:6, reg:8, __reserved:2;
-		};
-		u32 value;
-	};
-};
-
-struct nps_host_reg_address_non_cl {
-	union {
-		struct {
-			u32 base:7, blkid:11, reg:12, __reserved:2;
-		};
-		u32 value;
-	};
-};
-
-static inline void *nps_host_reg_non_cl(u32 blkid, u32 reg)
-{
-	struct nps_host_reg_address_non_cl reg_address;
-
-	reg_address.value = NPS_HOST_REG_BASE;
-	reg_address.blkid = blkid;
-	reg_address.reg = reg;
-
-	return (void *)reg_address.value;
-}
-
-static inline void *nps_host_reg(u32 cpu, u32 blkid, u32 reg)
-{
-	struct nps_host_reg_address reg_address;
-	u32 cl = NPS_CPU_TO_CLUSTER_NUM(cpu);
-
-	reg_address.value = NPS_HOST_REG_BASE;
-	reg_address.cl_x  = (cl >> 2) & 0x3;
-	reg_address.cl_y  = cl & 0x3;
-	reg_address.blkid = blkid;
-	reg_address.reg   = reg;
-
-	return (void *)reg_address.value;
-}
-#endif /* __ASSEMBLY__ */
-
-#endif /* SOC_NPS_COMMON_H */
diff --git a/include/soc/nps/mtm.h b/include/soc/nps/mtm.h
deleted file mode 100644
index d2f5e7e3703e..000000000000
--- a/include/soc/nps/mtm.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright (c) 2016, Mellanox Technologies. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef SOC_NPS_MTM_H
-#define SOC_NPS_MTM_H
-
-#define CTOP_INST_HWSCHD_OFF_R3                 0x3B6F00BF
-#define CTOP_INST_HWSCHD_RESTORE_R3             0x3E6F70C3
-
-static inline void hw_schd_save(unsigned int *flags)
-{
-	__asm__ __volatile__(
-	"       .word %1\n"
-	"       st r3,[%0]\n"
-	:
-	: "r"(flags), "i"(CTOP_INST_HWSCHD_OFF_R3)
-	: "r3", "memory");
-}
-
-static inline void hw_schd_restore(unsigned int flags)
-{
-	__asm__ __volatile__(
-	"       mov r3, %0\n"
-	"       .word %1\n"
-	:
-	: "r"(flags), "i"(CTOP_INST_HWSCHD_RESTORE_R3)
-	: "r3");
-}
-
-#endif /* SOC_NPS_MTM_H */
-- 
2.25.1

Re: [PATCH 1/3] drivers/clocksource: Remove EZChip NPS clocksource driver

[Daniel Lezcano]

On 05/11/2020 22:22, Vineet Gupta wrote:
> NPS platform has been removed from ARC port and there are no in-tree
> users of it now. So RIP !
> 
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
> ---

Applied, thanks!


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

[tip: timers/core] clocksource/drivers/nps: Remove EZChip NPS clocksource driver

[tip-bot2 for Vineet Gupta]

The following commit has been merged into the timers/core branch of tip:

Commit-ID:     b6ea209ef124dad4045772a759e2aecd191534c0
Gitweb:        https://git.kernel.org/tip/b6ea209ef124dad4045772a759e2aecd191534c0
Author:        Vineet Gupta <Vineet.Gupta1@synopsys.com>
AuthorDate:    Thu, 05 Nov 2020 13:22:08 -08:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Thu, 03 Dec 2020 19:16:18 +01:00

clocksource/drivers/nps: Remove EZChip NPS clocksource driver

NPS platform has been removed from ARC port and there are no in-tree
users of it now. So RIP !

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20201105212210.1891598-2-vgupta@synopsys.com
---
 drivers/clocksource/Kconfig     |  10 +-
 drivers/clocksource/Makefile    |   1 +-
 drivers/clocksource/timer-nps.c | 284 +-------------------------------
 3 files changed, 295 deletions(-)
 delete mode 100644 drivers/clocksource/timer-nps.c

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 68b087b..390c27c 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -275,16 +275,6 @@ config CLKSRC_TI_32K
 	  This option enables support for Texas Instruments 32.768 Hz clocksource
 	  available on many OMAP-like platforms.
 
-config CLKSRC_NPS
-	bool "NPS400 clocksource driver" if COMPILE_TEST
-	depends on !PHYS_ADDR_T_64BIT
-	select CLKSRC_MMIO
-	select TIMER_OF if OF
-	help
-	  NPS400 clocksource support.
-	  It has a 64-bit counter with update rate up to 1000MHz.
-	  This counter is accessed via couple of 32-bit memory-mapped registers.
-
 config CLKSRC_STM32
 	bool "Clocksource for STM32 SoCs" if !ARCH_STM32
 	depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 1c444cc..3c75cbb 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -56,7 +56,6 @@ obj-$(CONFIG_CLKSRC_QCOM)	+= timer-qcom.o
 obj-$(CONFIG_MTK_TIMER)		+= timer-mediatek.o
 obj-$(CONFIG_CLKSRC_PISTACHIO)	+= timer-pistachio.o
 obj-$(CONFIG_CLKSRC_TI_32K)	+= timer-ti-32k.o
-obj-$(CONFIG_CLKSRC_NPS)	+= timer-nps.o
 obj-$(CONFIG_OXNAS_RPS_TIMER)	+= timer-oxnas-rps.o
 obj-$(CONFIG_OWL_TIMER)		+= timer-owl.o
 obj-$(CONFIG_MILBEAUT_TIMER)	+= timer-milbeaut.o
diff --git a/drivers/clocksource/timer-nps.c b/drivers/clocksource/timer-nps.c
deleted file mode 100644
index 7b6bb0d..0000000
--- a/drivers/clocksource/timer-nps.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Copyright (c) 2016, Mellanox Technologies. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/interrupt.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/cpu.h>
-#include <soc/nps/common.h>
-
-#define NPS_MSU_TICK_LOW	0xC8
-#define NPS_CLUSTER_OFFSET	8
-#define NPS_CLUSTER_NUM		16
-
-/* This array is per cluster of CPUs (Each NPS400 cluster got 256 CPUs) */
-static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly;
-
-static int __init nps_get_timer_clk(struct device_node *node,
-			     unsigned long *timer_freq,
-			     struct clk **clk)
-{
-	int ret;
-
-	*clk = of_clk_get(node, 0);
-	ret = PTR_ERR_OR_ZERO(*clk);
-	if (ret) {
-		pr_err("timer missing clk\n");
-		return ret;
-	}
-
-	ret = clk_prepare_enable(*clk);
-	if (ret) {
-		pr_err("Couldn't enable parent clk\n");
-		clk_put(*clk);
-		return ret;
-	}
-
-	*timer_freq = clk_get_rate(*clk);
-	if (!(*timer_freq)) {
-		pr_err("Couldn't get clk rate\n");
-		clk_disable_unprepare(*clk);
-		clk_put(*clk);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static u64 nps_clksrc_read(struct clocksource *clksrc)
-{
-	int cluster = raw_smp_processor_id() >> NPS_CLUSTER_OFFSET;
-
-	return (u64)ioread32be(nps_msu_reg_low_addr[cluster]);
-}
-
-static int __init nps_setup_clocksource(struct device_node *node)
-{
-	int ret, cluster;
-	struct clk *clk;
-	unsigned long nps_timer1_freq;
-
-
-	for (cluster = 0; cluster < NPS_CLUSTER_NUM; cluster++)
-		nps_msu_reg_low_addr[cluster] =
-			nps_host_reg((cluster << NPS_CLUSTER_OFFSET),
-				     NPS_MSU_BLKID, NPS_MSU_TICK_LOW);
-
-	ret = nps_get_timer_clk(node, &nps_timer1_freq, &clk);
-	if (ret)
-		return ret;
-
-	ret = clocksource_mmio_init(nps_msu_reg_low_addr, "nps-tick",
-				    nps_timer1_freq, 300, 32, nps_clksrc_read);
-	if (ret) {
-		pr_err("Couldn't register clock source.\n");
-		clk_disable_unprepare(clk);
-	}
-
-	return ret;
-}
-
-TIMER_OF_DECLARE(ezchip_nps400_clksrc, "ezchip,nps400-timer",
-		       nps_setup_clocksource);
-TIMER_OF_DECLARE(ezchip_nps400_clk_src, "ezchip,nps400-timer1",
-		       nps_setup_clocksource);
-
-#ifdef CONFIG_EZNPS_MTM_EXT
-#include <soc/nps/mtm.h>
-
-/* Timer related Aux registers */
-#define NPS_REG_TIMER0_TSI	0xFFFFF850
-#define NPS_REG_TIMER0_LIMIT	0x23
-#define NPS_REG_TIMER0_CTRL	0x22
-#define NPS_REG_TIMER0_CNT	0x21
-
-/*
- * Interrupt Enabled (IE) - re-arm the timer
- * Not Halted (NH) - is cleared when working with JTAG (for debug)
- */
-#define TIMER0_CTRL_IE		BIT(0)
-#define TIMER0_CTRL_NH		BIT(1)
-
-static unsigned long nps_timer0_freq;
-static unsigned long nps_timer0_irq;
-
-static void nps_clkevent_rm_thread(void)
-{
-	int thread;
-	unsigned int cflags, enabled_threads;
-
-	hw_schd_save(&cflags);
-
-	enabled_threads = read_aux_reg(NPS_REG_TIMER0_TSI);
-
-	/* remove thread from TSI1 */
-	thread = read_aux_reg(CTOP_AUX_THREAD_ID);
-	enabled_threads &= ~(1 << thread);
-	write_aux_reg(NPS_REG_TIMER0_TSI, enabled_threads);
-
-	/* Acknowledge and if needed re-arm the timer */
-	if (!enabled_threads)
-		write_aux_reg(NPS_REG_TIMER0_CTRL, TIMER0_CTRL_NH);
-	else
-		write_aux_reg(NPS_REG_TIMER0_CTRL,
-			      TIMER0_CTRL_IE | TIMER0_CTRL_NH);
-
-	hw_schd_restore(cflags);
-}
-
-static void nps_clkevent_add_thread(unsigned long delta)
-{
-	int thread;
-	unsigned int cflags, enabled_threads;
-
-	hw_schd_save(&cflags);
-
-	/* add thread to TSI1 */
-	thread = read_aux_reg(CTOP_AUX_THREAD_ID);
-	enabled_threads = read_aux_reg(NPS_REG_TIMER0_TSI);
-	enabled_threads |= (1 << thread);
-	write_aux_reg(NPS_REG_TIMER0_TSI, enabled_threads);
-
-	/* set next timer event */
-	write_aux_reg(NPS_REG_TIMER0_LIMIT, delta);
-	write_aux_reg(NPS_REG_TIMER0_CNT, 0);
-	write_aux_reg(NPS_REG_TIMER0_CTRL,
-		      TIMER0_CTRL_IE | TIMER0_CTRL_NH);
-
-	hw_schd_restore(cflags);
-}
-
-/*
- * Whenever anyone tries to change modes, we just mask interrupts
- * and wait for the next event to get set.
- */
-static int nps_clkevent_set_state(struct clock_event_device *dev)
-{
-	nps_clkevent_rm_thread();
-	disable_percpu_irq(nps_timer0_irq);
-
-	return 0;
-}
-
-static int nps_clkevent_set_next_event(unsigned long delta,
-				       struct clock_event_device *dev)
-{
-	nps_clkevent_add_thread(delta);
-	enable_percpu_irq(nps_timer0_irq, IRQ_TYPE_NONE);
-
-	return 0;
-}
-
-static DEFINE_PER_CPU(struct clock_event_device, nps_clockevent_device) = {
-	.name				=	"NPS Timer0",
-	.features			=	CLOCK_EVT_FEAT_ONESHOT,
-	.rating				=	300,
-	.set_next_event			=	nps_clkevent_set_next_event,
-	.set_state_oneshot		=	nps_clkevent_set_state,
-	.set_state_oneshot_stopped	=	nps_clkevent_set_state,
-	.set_state_shutdown		=	nps_clkevent_set_state,
-	.tick_resume			=	nps_clkevent_set_state,
-};
-
-static irqreturn_t timer_irq_handler(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	nps_clkevent_rm_thread();
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static int nps_timer_starting_cpu(unsigned int cpu)
-{
-	struct clock_event_device *evt = this_cpu_ptr(&nps_clockevent_device);
-
-	evt->cpumask = cpumask_of(smp_processor_id());
-
-	clockevents_config_and_register(evt, nps_timer0_freq, 0, ULONG_MAX);
-	enable_percpu_irq(nps_timer0_irq, IRQ_TYPE_NONE);
-
-	return 0;
-}
-
-static int nps_timer_dying_cpu(unsigned int cpu)
-{
-	disable_percpu_irq(nps_timer0_irq);
-	return 0;
-}
-
-static int __init nps_setup_clockevent(struct device_node *node)
-{
-	struct clk *clk;
-	int ret;
-
-	nps_timer0_irq = irq_of_parse_and_map(node, 0);
-	if (nps_timer0_irq <= 0) {
-		pr_err("clockevent: missing irq\n");
-		return -EINVAL;
-	}
-
-	ret = nps_get_timer_clk(node, &nps_timer0_freq, &clk);
-	if (ret)
-		return ret;
-
-	/* Needs apriori irq_set_percpu_devid() done in intc map function */
-	ret = request_percpu_irq(nps_timer0_irq, timer_irq_handler,
-				 "Timer0 (per-cpu-tick)",
-				 &nps_clockevent_device);
-	if (ret) {
-		pr_err("Couldn't request irq\n");
-		clk_disable_unprepare(clk);
-		return ret;
-	}
-
-	ret = cpuhp_setup_state(CPUHP_AP_ARC_TIMER_STARTING,
-				"clockevents/nps:starting",
-				nps_timer_starting_cpu,
-				nps_timer_dying_cpu);
-	if (ret) {
-		pr_err("Failed to setup hotplug state\n");
-		clk_disable_unprepare(clk);
-		free_percpu_irq(nps_timer0_irq, &nps_clockevent_device);
-		return ret;
-	}
-
-	return 0;
-}
-
-TIMER_OF_DECLARE(ezchip_nps400_clk_evt, "ezchip,nps400-timer0",
-		       nps_setup_clockevent);
-#endif /* CONFIG_EZNPS_MTM_EXT */

Re: [PATCH 2/3] drivers/irqchip: Remove EZChip NPS interrupt controller

[Vineet Gupta]

On 11/5/20 1:22 PM, Vineet Gupta wrote:
> NPS platform has been removed from ARC port and there are no in-tree
> users of it now. So RIP !
> 
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Marc Zyngier <maz@kernel.org>
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Ping !

> ---
>   drivers/irqchip/Kconfig     |   7 --
>   drivers/irqchip/Makefile    |   1 -
>   drivers/irqchip/irq-eznps.c | 165 ------------------------------------
>   3 files changed, 173 deletions(-)
>   delete mode 100644 drivers/irqchip/irq-eznps.c
> 
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index c6098eee0c7c..7920c3a3017d 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -389,13 +389,6 @@ config LS_SCFG_MSI
>   config PARTITION_PERCPU
>   	bool
>   
> -config EZNPS_GIC
> -	bool "NPS400 Global Interrupt Manager (GIM)"
> -	depends on ARC || (COMPILE_TEST && !64BIT)
> -	select IRQ_DOMAIN
> -	help
> -	  Support the EZchip NPS400 global interrupt controller
> -
>   config STM32_EXTI
>   	bool
>   	select IRQ_DOMAIN
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index 94c2885882ee..0ac93bfaec61 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -86,7 +86,6 @@ obj-$(CONFIG_MVEBU_PIC)			+= irq-mvebu-pic.o
>   obj-$(CONFIG_MVEBU_SEI)			+= irq-mvebu-sei.o
>   obj-$(CONFIG_LS_EXTIRQ)			+= irq-ls-extirq.o
>   obj-$(CONFIG_LS_SCFG_MSI)		+= irq-ls-scfg-msi.o
> -obj-$(CONFIG_EZNPS_GIC)			+= irq-eznps.o
>   obj-$(CONFIG_ARCH_ASPEED)		+= irq-aspeed-vic.o irq-aspeed-i2c-ic.o irq-aspeed-scu-ic.o
>   obj-$(CONFIG_STM32_EXTI) 		+= irq-stm32-exti.o
>   obj-$(CONFIG_QCOM_IRQ_COMBINER)		+= qcom-irq-combiner.o
> diff --git a/drivers/irqchip/irq-eznps.c b/drivers/irqchip/irq-eznps.c
> deleted file mode 100644
> index 2a7a38830a8d..000000000000
> --- a/drivers/irqchip/irq-eznps.c
> +++ /dev/null
> @@ -1,165 +0,0 @@
> -/*
> - * Copyright (c) 2016, Mellanox Technologies. All rights reserved.
> - *
> - * This software is available to you under a choice of one of two
> - * licenses.  You may choose to be licensed under the terms of the GNU
> - * General Public License (GPL) Version 2, available from the file
> - * COPYING in the main directory of this source tree, or the
> - * OpenIB.org BSD license below:
> - *
> - *     Redistribution and use in source and binary forms, with or
> - *     without modification, are permitted provided that the following
> - *     conditions are met:
> - *
> - *      - Redistributions of source code must retain the above
> - *        copyright notice, this list of conditions and the following
> - *        disclaimer.
> - *
> - *      - Redistributions in binary form must reproduce the above
> - *        copyright notice, this list of conditions and the following
> - *        disclaimer in the documentation and/or other materials
> - *        provided with the distribution.
> - *
> - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
> - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
> - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
> - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
> - * SOFTWARE.
> - */
> -
> -#include <linux/interrupt.h>
> -#include <linux/module.h>
> -#include <linux/of.h>
> -#include <linux/irq.h>
> -#include <linux/irqdomain.h>
> -#include <linux/irqchip.h>
> -#include <soc/nps/common.h>
> -
> -#define NPS_NR_CPU_IRQS 8  /* number of interrupt lines of NPS400 CPU */
> -#define NPS_TIMER0_IRQ  3
> -
> -/*
> - * NPS400 core includes an Interrupt Controller (IC) support.
> - * All cores can deactivate level irqs at first level control
> - * at cores mesh layer called MTM.
> - * For devices out side chip e.g. uart, network there is another
> - * level called Global Interrupt Manager (GIM).
> - * This second level can control level and edge interrupt.
> - *
> - * NOTE: AUX_IENABLE and CTOP_AUX_IACK are auxiliary registers
> - * with private HW copy per CPU.
> - */
> -
> -static void nps400_irq_mask(struct irq_data *irqd)
> -{
> -	unsigned int ienb;
> -	unsigned int irq = irqd_to_hwirq(irqd);
> -
> -	ienb = read_aux_reg(AUX_IENABLE);
> -	ienb &= ~(1 << irq);
> -	write_aux_reg(AUX_IENABLE, ienb);
> -}
> -
> -static void nps400_irq_unmask(struct irq_data *irqd)
> -{
> -	unsigned int ienb;
> -	unsigned int irq = irqd_to_hwirq(irqd);
> -
> -	ienb = read_aux_reg(AUX_IENABLE);
> -	ienb |= (1 << irq);
> -	write_aux_reg(AUX_IENABLE, ienb);
> -}
> -
> -static void nps400_irq_eoi_global(struct irq_data *irqd)
> -{
> -	unsigned int __maybe_unused irq = irqd_to_hwirq(irqd);
> -
> -	write_aux_reg(CTOP_AUX_IACK, 1 << irq);
> -
> -	/* Don't ack GIC before all device access attempts are done */
> -	mb();
> -
> -	nps_ack_gic();
> -}
> -
> -static void nps400_irq_ack(struct irq_data *irqd)
> -{
> -	unsigned int __maybe_unused irq = irqd_to_hwirq(irqd);
> -
> -	write_aux_reg(CTOP_AUX_IACK, 1 << irq);
> -}
> -
> -static struct irq_chip nps400_irq_chip_fasteoi = {
> -	.name		= "NPS400 IC Global",
> -	.irq_mask	= nps400_irq_mask,
> -	.irq_unmask	= nps400_irq_unmask,
> -	.irq_eoi	= nps400_irq_eoi_global,
> -};
> -
> -static struct irq_chip nps400_irq_chip_percpu = {
> -	.name		= "NPS400 IC",
> -	.irq_mask	= nps400_irq_mask,
> -	.irq_unmask	= nps400_irq_unmask,
> -	.irq_ack	= nps400_irq_ack,
> -};
> -
> -static int nps400_irq_map(struct irq_domain *d, unsigned int virq,
> -			  irq_hw_number_t hw)
> -{
> -	switch (hw) {
> -	case NPS_TIMER0_IRQ:
> -#ifdef CONFIG_SMP
> -	case NPS_IPI_IRQ:
> -#endif
> -		irq_set_percpu_devid(virq);
> -		irq_set_chip_and_handler(virq, &nps400_irq_chip_percpu,
> -					 handle_percpu_devid_irq);
> -		break;
> -	default:
> -		irq_set_chip_and_handler(virq, &nps400_irq_chip_fasteoi,
> -					 handle_fasteoi_irq);
> -		break;
> -	}
> -
> -	return 0;
> -}
> -
> -static const struct irq_domain_ops nps400_irq_ops = {
> -	.xlate = irq_domain_xlate_onecell,
> -	.map = nps400_irq_map,
> -};
> -
> -static int __init nps400_of_init(struct device_node *node,
> -				 struct device_node *parent)
> -{
> -	struct irq_domain *nps400_root_domain;
> -
> -	if (parent) {
> -		pr_err("DeviceTree incore ic not a root irq controller\n");
> -		return -EINVAL;
> -	}
> -
> -	nps400_root_domain = irq_domain_add_linear(node, NPS_NR_CPU_IRQS,
> -						   &nps400_irq_ops, NULL);
> -
> -	if (!nps400_root_domain) {
> -		pr_err("nps400 root irq domain not avail\n");
> -		return -ENOMEM;
> -	}
> -
> -	/*
> -	 * Needed for primary domain lookup to succeed
> -	 * This is a primary irqchip, and can never have a parent
> -	 */
> -	irq_set_default_host(nps400_root_domain);
> -
> -#ifdef CONFIG_SMP
> -	irq_create_mapping(nps400_root_domain, NPS_IPI_IRQ);
> -#endif
> -
> -	return 0;
> -}
> -IRQCHIP_DECLARE(ezchip_nps400_ic, "ezchip,nps400-ic", nps400_of_init);
> 

[irqchip: irq/irqchip-next] drivers/irqchip: Remove EZChip NPS interrupt controller

[irqchip-bot for Vineet Gupta]

The following commit has been merged into the irq/irqchip-next branch of irqchip:

Commit-ID:     04e7f423f4a96ad492fd51bf2234b8982400ab5f
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms/04e7f423f4a96ad492fd51bf2234b8982400ab5f
Author:        Vineet Gupta <Vineet.Gupta1@synopsys.com>
AuthorDate:    Thu, 05 Nov 2020 13:22:09 -08:00
Committer:     Marc Zyngier <maz@kernel.org>
CommitterDate: Fri, 11 Dec 2020 14:47:50 

drivers/irqchip: Remove EZChip NPS interrupt controller

NPS platform has been removed from ARC port and there are no in-tree
users of it now. So RIP !

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <maz@kernel.org>
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20201105212210.1891598-3-vgupta@synopsys.com
---
 drivers/irqchip/Kconfig     |   7 +-
 drivers/irqchip/Makefile    |   1 +-
 drivers/irqchip/irq-eznps.c | 165 +-----------------------------------
 3 files changed, 173 deletions(-)
 delete mode 100644 drivers/irqchip/irq-eznps.c

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 2aa79c3..94920a5 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -387,13 +387,6 @@ config LS_SCFG_MSI
 config PARTITION_PERCPU
 	bool
 
-config EZNPS_GIC
-	bool "NPS400 Global Interrupt Manager (GIM)"
-	depends on ARC || (COMPILE_TEST && !64BIT)
-	select IRQ_DOMAIN
-	help
-	  Support the EZchip NPS400 global interrupt controller
-
 config STM32_EXTI
 	bool
 	select IRQ_DOMAIN
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 94c2885..0ac93bf 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -86,7 +86,6 @@ obj-$(CONFIG_MVEBU_PIC)			+= irq-mvebu-pic.o
 obj-$(CONFIG_MVEBU_SEI)			+= irq-mvebu-sei.o
 obj-$(CONFIG_LS_EXTIRQ)			+= irq-ls-extirq.o
 obj-$(CONFIG_LS_SCFG_MSI)		+= irq-ls-scfg-msi.o
-obj-$(CONFIG_EZNPS_GIC)			+= irq-eznps.o
 obj-$(CONFIG_ARCH_ASPEED)		+= irq-aspeed-vic.o irq-aspeed-i2c-ic.o irq-aspeed-scu-ic.o
 obj-$(CONFIG_STM32_EXTI) 		+= irq-stm32-exti.o
 obj-$(CONFIG_QCOM_IRQ_COMBINER)		+= qcom-irq-combiner.o
diff --git a/drivers/irqchip/irq-eznps.c b/drivers/irqchip/irq-eznps.c
deleted file mode 100644
index 2a7a388..0000000
--- a/drivers/irqchip/irq-eznps.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * Copyright (c) 2016, Mellanox Technologies. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/irqchip.h>
-#include <soc/nps/common.h>
-
-#define NPS_NR_CPU_IRQS 8  /* number of interrupt lines of NPS400 CPU */
-#define NPS_TIMER0_IRQ  3
-
-/*
- * NPS400 core includes an Interrupt Controller (IC) support.
- * All cores can deactivate level irqs at first level control
- * at cores mesh layer called MTM.
- * For devices out side chip e.g. uart, network there is another
- * level called Global Interrupt Manager (GIM).
- * This second level can control level and edge interrupt.
- *
- * NOTE: AUX_IENABLE and CTOP_AUX_IACK are auxiliary registers
- * with private HW copy per CPU.
- */
-
-static void nps400_irq_mask(struct irq_data *irqd)
-{
-	unsigned int ienb;
-	unsigned int irq = irqd_to_hwirq(irqd);
-
-	ienb = read_aux_reg(AUX_IENABLE);
-	ienb &= ~(1 << irq);
-	write_aux_reg(AUX_IENABLE, ienb);
-}
-
-static void nps400_irq_unmask(struct irq_data *irqd)
-{
-	unsigned int ienb;
-	unsigned int irq = irqd_to_hwirq(irqd);
-
-	ienb = read_aux_reg(AUX_IENABLE);
-	ienb |= (1 << irq);
-	write_aux_reg(AUX_IENABLE, ienb);
-}
-
-static void nps400_irq_eoi_global(struct irq_data *irqd)
-{
-	unsigned int __maybe_unused irq = irqd_to_hwirq(irqd);
-
-	write_aux_reg(CTOP_AUX_IACK, 1 << irq);
-
-	/* Don't ack GIC before all device access attempts are done */
-	mb();
-
-	nps_ack_gic();
-}
-
-static void nps400_irq_ack(struct irq_data *irqd)
-{
-	unsigned int __maybe_unused irq = irqd_to_hwirq(irqd);
-
-	write_aux_reg(CTOP_AUX_IACK, 1 << irq);
-}
-
-static struct irq_chip nps400_irq_chip_fasteoi = {
-	.name		= "NPS400 IC Global",
-	.irq_mask	= nps400_irq_mask,
-	.irq_unmask	= nps400_irq_unmask,
-	.irq_eoi	= nps400_irq_eoi_global,
-};
-
-static struct irq_chip nps400_irq_chip_percpu = {
-	.name		= "NPS400 IC",
-	.irq_mask	= nps400_irq_mask,
-	.irq_unmask	= nps400_irq_unmask,
-	.irq_ack	= nps400_irq_ack,
-};
-
-static int nps400_irq_map(struct irq_domain *d, unsigned int virq,
-			  irq_hw_number_t hw)
-{
-	switch (hw) {
-	case NPS_TIMER0_IRQ:
-#ifdef CONFIG_SMP
-	case NPS_IPI_IRQ:
-#endif
-		irq_set_percpu_devid(virq);
-		irq_set_chip_and_handler(virq, &nps400_irq_chip_percpu,
-					 handle_percpu_devid_irq);
-		break;
-	default:
-		irq_set_chip_and_handler(virq, &nps400_irq_chip_fasteoi,
-					 handle_fasteoi_irq);
-		break;
-	}
-
-	return 0;
-}
-
-static const struct irq_domain_ops nps400_irq_ops = {
-	.xlate = irq_domain_xlate_onecell,
-	.map = nps400_irq_map,
-};
-
-static int __init nps400_of_init(struct device_node *node,
-				 struct device_node *parent)
-{
-	struct irq_domain *nps400_root_domain;
-
-	if (parent) {
-		pr_err("DeviceTree incore ic not a root irq controller\n");
-		return -EINVAL;
-	}
-
-	nps400_root_domain = irq_domain_add_linear(node, NPS_NR_CPU_IRQS,
-						   &nps400_irq_ops, NULL);
-
-	if (!nps400_root_domain) {
-		pr_err("nps400 root irq domain not avail\n");
-		return -ENOMEM;
-	}
-
-	/*
-	 * Needed for primary domain lookup to succeed
-	 * This is a primary irqchip, and can never have a parent
-	 */
-	irq_set_default_host(nps400_root_domain);
-
-#ifdef CONFIG_SMP
-	irq_create_mapping(nps400_root_domain, NPS_IPI_IRQ);
-#endif
-
-	return 0;
-}
-IRQCHIP_DECLARE(ezchip_nps400_ic, "ezchip,nps400-ic", nps400_of_init);

Re: [PATCH 0/3] Remove drivers used by EZChip NPS platform

[Marc Zyngier]

On Thu, 5 Nov 2020 13:22:07 -0800, Vineet Gupta wrote:
> This series removes any drivers associated with EZChip NPS platform
> which was removed from ARC in 5.10-rc1.
> 
> Vineet Gupta (3):
>   drivers/clocksource: Remove EZChip NPS clocksource driver
>   drivers/irqchip: Remove EZChip NPS interrupt controller
>   include/soc: remove headers for EZChip NPS
> 
> [...]

Applied to irq/irqchip-next, thanks!

[2/3] drivers/irqchip: Remove EZChip NPS interrupt controller
      commit: 04e7f423f4a96ad492fd51bf2234b8982400ab5f

Please route the two other patches via their respective trees.

Cheers,

	M.
-- 
Without deviation from the norm, progress is not possible.