[PATCH 4.4 00/60] 4.4.40-stable review

[PATCH 4.4 00/60] 4.4.40-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.4.40 release.
There are 60 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri Jan  6 20:06:51 UTC 2017.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.40-rc1.gz
or in the git tree and branch at:
  git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.4.40-rc1

Ming Lei <ming.lei@canonical.com>
    driver core: fix race between creating/querying glue dir and its cleanup

Eric Sandeen <sandeen@sandeen.net>
    xfs: set AGI buffer type in xlog_recover_clear_agi_bucket

Julien Grall <julien.grall@arm.com>
    arm/xen: Use alloc_percpu rather than __alloc_percpu

Boris Ostrovsky <boris.ostrovsky@oracle.com>
    xen/gntdev: Use VM_MIXEDMAP instead of VM_IO to avoid NUMA balancing

Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
    tpm xen: Remove bogus tpm_chip_unregister

Douglas Anderson <dianders@chromium.org>
    kernel/debug/debug_core.c: more properly delay for secondary CPUs

Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
    kernel/watchdog: use nmi registers snapshot in hardlockup handler

Pavel Shilovsky <pshilov@microsoft.com>
    CIFS: Fix a possible memory corruption in push locks

Pavel Shilovsky <pshilov@microsoft.com>
    CIFS: Fix missing nls unload in smb2_reconnect()

Pavel Shilovsky <pshilov@microsoft.com>
    CIFS: Fix a possible memory corruption during reconnect

Takashi Iwai <tiwai@suse.de>
    ASoC: intel: Fix crash at suspend/resume without card registration

Benjamin Marzinski <bmarzins@redhat.com>
    dm space map metadata: fix 'struct sm_metadata' leak on failed create

Ondrej Kozina <okozina@redhat.com>
    dm crypt: mark key as invalid until properly loaded

Wei Yongjun <weiyj.lk@gmail.com>
    dm flakey: return -EINVAL on interval bounds error in flakey_ctr()

Bart Van Assche <bart.vanassche@sandisk.com>
    blk-mq: Do not invoke .queue_rq() for a stopped queue

Felipe Balbi <felipe.balbi@linux.intel.com>
    usb: gadget: composite: always set ep->mult to a sensible value

Eric W. Biederman <ebiederm@xmission.com>
    exec: Ensure mm->user_ns contains the execed files

Aleksa Sarai <asarai@suse.de>
    fs: exec: apply CLOEXEC before changing dumpable task flags

Shaohua Li <shli@fb.com>
    mm/vmscan.c: set correct defer count for shrinker

Omar Sandoval <osandov@fb.com>
    loop: return proper error from loop_queue_rq()

Nicolai Stange <nicstange@gmail.com>
    f2fs: set ->owner for debugfs status file's file_operations

Sergey Karamov <skaramov@google.com>
    ext4: do not perform data journaling when data is encrypted

Dan Carpenter <dan.carpenter@oracle.com>
    ext4: return -ENOMEM instead of success

Darrick J. Wong <darrick.wong@oracle.com>
    ext4: reject inodes with negative size

Theodore Ts'o <tytso@mit.edu>
    ext4: add sanity checking to count_overhead()

Theodore Ts'o <tytso@mit.edu>
    ext4: fix in-superblock mount options processing

Theodore Ts'o <tytso@mit.edu>
    ext4: use more strict checks for inodes_per_block on mount

Chandan Rajendra <chandan@linux.vnet.ibm.com>
    ext4: fix stack memory corruption with 64k block size

Chandan Rajendra <chandan@linux.vnet.ibm.com>
    ext4: fix mballoc breakage with 64k block size

Alex Porosanu <alexandru.porosanu@nxp.com>
    crypto: caam - fix AEAD givenc descriptors

Eric W. Biederman <ebiederm@xmission.com>
    ptrace: Capture the ptracer's creds not PT_PTRACE_CAP

Eric W. Biederman <ebiederm@xmission.com>
    mm: Add a user_ns owner to mm_struct and fix ptrace permission checks

NeilBrown <neilb@suse.com>
    block_dev: don't test bdev->bd_contains when it is not stable

Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
    btrfs: make file clone aware of fatal signals

Josef Bacik <jbacik@fb.com>
    Btrfs: don't BUG() during drop snapshot

Liu Bo <bo.li.liu@oracle.com>
    Btrfs: fix memory leak in do_walk_down

Josef Bacik <jbacik@fb.com>
    Btrfs: don't leak reloc root nodes on error

Liu Bo <bo.li.liu@oracle.com>
    Btrfs: return gracefully from balance if fs tree is corrupted

Liu Bo <bo.li.liu@oracle.com>
    Btrfs: bail out if block group has different mixed flag

Liu Bo <bo.li.liu@oracle.com>
    Btrfs: fix memory leak in reading btree blocks

Richard Watts <rrw@kynesim.co.uk>
    clk: ti: omap36xx: Work around sprz319 advisory 2.1

Kai-Heng Feng <kai.heng.feng@canonical.com>
    ALSA: hda: when comparing pin configurations, ignore assoc in addition to seq

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Gate the mic jack on HP Z1 Gen3 AiO

Hui Wang <hui.wang@canonical.com>
    ALSA: hda - fix headset-mic problem on a Dell laptop

Hui Wang <hui.wang@canonical.com>
    ALSA: hda - ignore the assoc and seq when comparing pin configurations

Sven Hahne <hahne@zeitkunst.eu>
    ALSA: hda/ca0132 - Add quirk for Alienware 15 R2 2016

Jussi Laako <jussi@sonarnerd.net>
    ALSA: hiface: Fix M2Tech hiFace driver sampling rate change

Con Kolivas <con@kolivas.org>
    ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirks

Alan Stern <stern@rowland.harvard.edu>
    USB: UHCI: report non-PME wakeup signalling for Intel hardware

Felipe Balbi <felipe.balbi@linux.intel.com>
    usb: gadget: composite: correctly initialize ep->maxpacket

Peter Chen <peter.chen@nxp.com>
    usb: gadget: f_uac2: fix error handling at afunc_bind

Mathias Nyman <mathias.nyman@linux.intel.com>
    usb: hub: Fix auto-remount of safely removed or ejected USB-3 devices

Nathaniel Quillin <ndq@google.com>
    USB: cdc-acm: add device id for GW Instek AFG-125

Johan Hovold <johan@kernel.org>
    USB: serial: kl5kusb105: fix open error path

Giuseppe Lippolis <giu.lippolis@gmail.com>
    USB: serial: option: add dlink dwm-158

Daniele Palmas <dnlplm@gmail.com>
    USB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041

Filipe Manana <fdmanana@suse.com>
    Btrfs: fix qgroup rescan worker initialization

David Sterba <dsterba@suse.com>
    btrfs: store and load values of stripes_min/stripes_max in balance status item

Robbie Ko <robbieko@synology.com>
    Btrfs: fix tree search logic when replaying directory entry deletes

Maxim Patlasov <mpatlasov@virtuozzo.com>
    btrfs: limit async_work allocation and worker func duration


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm/xen/enlighten.c                           |   3 +-
 block/blk-mq.c                                     |   6 +-
 drivers/base/core.c                                |  39 ++++++--
 drivers/block/loop.c                               |   2 +-
 drivers/char/tpm/xen-tpmfront.c                    |   1 -
 drivers/clk/ti/clk-3xxx.c                          |  20 ++--
 drivers/clk/ti/clock.h                             |   9 ++
 drivers/clk/ti/dpll.c                              |  19 +++-
 drivers/clk/ti/dpll3xxx.c                          |  67 ++++++++++++++
 drivers/crypto/caam/caamalg.c                      |   4 +-
 drivers/md/dm-crypt.c                              |   7 +-
 drivers/md/dm-flakey.c                             |   2 +
 drivers/md/persistent-data/dm-space-map-metadata.c |  14 ++-
 drivers/usb/class/cdc-acm.c                        |   1 +
 drivers/usb/core/hub.c                             | 101 ++++++++-------------
 drivers/usb/gadget/composite.c                     |  11 ++-
 drivers/usb/gadget/function/f_uac2.c               |  14 +--
 drivers/usb/gadget/function/uvc_video.c            |   2 +-
 drivers/usb/host/uhci-pci.c                        |   4 +
 drivers/usb/serial/kl5kusb105.c                    |  33 +++++--
 drivers/usb/serial/option.c                        |   7 ++
 drivers/xen/gntdev.c                               |   2 +-
 fs/block_dev.c                                     |   2 +-
 fs/btrfs/async-thread.c                            |  14 +++
 fs/btrfs/async-thread.h                            |   1 +
 fs/btrfs/ctree.h                                   |   4 +
 fs/btrfs/delayed-inode.c                           |   6 +-
 fs/btrfs/extent-tree.c                             |  51 +++++++++--
 fs/btrfs/extent_io.c                               |   9 ++
 fs/btrfs/ioctl.c                                   |   5 +
 fs/btrfs/qgroup.c                                  |   5 +-
 fs/btrfs/relocation.c                              |  27 ++++--
 fs/btrfs/tree-log.c                                |   3 +-
 fs/cifs/cifsglob.h                                 |   3 +
 fs/cifs/cifsproto.h                                |   3 +
 fs/cifs/connect.c                                  |  34 +++++--
 fs/cifs/smb2file.c                                 |   2 +-
 fs/cifs/smb2pdu.c                                  |  77 +++++++++++-----
 fs/cifs/smb2proto.h                                |   1 +
 fs/exec.c                                          |  32 ++++++-
 fs/ext4/ext4_jbd2.h                                |  14 +--
 fs/ext4/inline.c                                   |   4 +-
 fs/ext4/inode.c                                    |   6 ++
 fs/ext4/mballoc.c                                  |   4 +-
 fs/ext4/super.c                                    |  69 ++++++++------
 fs/f2fs/debug.c                                    |   1 +
 fs/xfs/xfs_log_recover.c                           |   1 +
 include/linux/capability.h                         |   2 +
 include/linux/mm_types.h                           |   1 +
 include/linux/ptrace.h                             |   1 -
 include/linux/sched.h                              |   1 +
 kernel/capability.c                                |  36 +++++++-
 kernel/debug/debug_core.c                          |   4 +-
 kernel/fork.c                                      |   9 +-
 kernel/ptrace.c                                    |  28 +++---
 kernel/watchdog.c                                  |   1 -
 mm/init-mm.c                                       |   2 +
 mm/vmscan.c                                        |  14 ++-
 sound/pci/hda/hda_auto_parser.c                    |   4 +-
 sound/pci/hda/patch_ca0132.c                       |   1 +
 sound/pci/hda/patch_conexant.c                     |  17 ++++
 sound/pci/hda/patch_realtek.c                      |   3 +
 sound/soc/intel/atom/sst-mfld-platform-pcm.c       |   6 ++
 sound/usb/hiface/pcm.c                             |   2 +
 sound/usb/mixer.c                                  |   3 +-
 66 files changed, 630 insertions(+), 255 deletions(-)

[PATCH 4.4 01/60] btrfs: limit async_work allocation and worker func duration

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maxim Patlasov <mpatlasov@virtuozzo.com>

commit 2939e1a86f758b55cdba73e29397dd3d94df13bc upstream.

Problem statement: unprivileged user who has read-write access to more than
one btrfs subvolume may easily consume all kernel memory (eventually
triggering oom-killer).

Reproducer (./mkrmdir below essentially loops over mkdir/rmdir):

[root@kteam1 ~]# cat prep.sh

DEV=/dev/sdb
mkfs.btrfs -f $DEV
mount $DEV /mnt
for i in `seq 1 16`
do
	mkdir /mnt/$i
	btrfs subvolume create /mnt/SV_$i
	ID=`btrfs subvolume list /mnt |grep "SV_$i$" |cut -d ' ' -f 2`
	mount -t btrfs -o subvolid=$ID $DEV /mnt/$i
	chmod a+rwx /mnt/$i
done

[root@kteam1 ~]# sh prep.sh

[maxim@kteam1 ~]$ for i in `seq 1 16`; do ./mkrmdir /mnt/$i 2000 2000 & done

[root@kteam1 ~]# for i in `seq 1 4`; do grep "kmalloc-128" /proc/slabinfo | grep -v dma; sleep 60; done
kmalloc-128        10144  10144    128   32    1 : tunables    0    0    0 : slabdata    317    317      0
kmalloc-128       9992352 9992352    128   32    1 : tunables    0    0    0 : slabdata 312261 312261      0
kmalloc-128       24226752 24226752    128   32    1 : tunables    0    0    0 : slabdata 757086 757086      0
kmalloc-128       42754240 42754240    128   32    1 : tunables    0    0    0 : slabdata 1336070 1336070      0

The huge numbers above come from insane number of async_work-s allocated
and queued by btrfs_wq_run_delayed_node.

The problem is caused by btrfs_wq_run_delayed_node() queuing more and more
works if the number of delayed items is above BTRFS_DELAYED_BACKGROUND. The
worker func (btrfs_async_run_delayed_root) processes at least
BTRFS_DELAYED_BATCH items (if they are present in the list). So, the machinery
works as expected while the list is almost empty. As soon as it is getting
bigger, worker func starts to process more than one item at a time, it takes
longer, and the chances to have async_works queued more than needed is getting
higher.

The problem above is worsened by another flaw of delayed-inode implementation:
if async_work was queued in a throttling branch (number of items >=
BTRFS_DELAYED_WRITEBACK), corresponding worker func won't quit until
the number of items < BTRFS_DELAYED_BACKGROUND / 2. So, it is possible that
the func occupies CPU infinitely (up to 30sec in my experiments): while the
func is trying to drain the list, the user activity may add more and more
items to the list.

The patch fixes both problems in straightforward way: refuse queuing too
many works in btrfs_wq_run_delayed_node and bail out of worker func if
at least BTRFS_DELAYED_WRITEBACK items are processed.

Changed in v2: remove support of thresh == NO_THRESHOLD.

Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/async-thread.c  |   14 ++++++++++++++
 fs/btrfs/async-thread.h  |    1 +
 fs/btrfs/delayed-inode.c |    6 ++++--
 3 files changed, 19 insertions(+), 2 deletions(-)

--- a/fs/btrfs/async-thread.c
+++ b/fs/btrfs/async-thread.c
@@ -70,6 +70,20 @@ void btrfs_##name(struct work_struct *ar
 	normal_work_helper(work);					\
 }
 
+bool btrfs_workqueue_normal_congested(struct btrfs_workqueue *wq)
+{
+	/*
+	 * We could compare wq->normal->pending with num_online_cpus()
+	 * to support "thresh == NO_THRESHOLD" case, but it requires
+	 * moving up atomic_inc/dec in thresh_queue/exec_hook. Let's
+	 * postpone it until someone needs the support of that case.
+	 */
+	if (wq->normal->thresh == NO_THRESHOLD)
+		return false;
+
+	return atomic_read(&wq->normal->pending) > wq->normal->thresh * 2;
+}
+
 BTRFS_WORK_HELPER(worker_helper);
 BTRFS_WORK_HELPER(delalloc_helper);
 BTRFS_WORK_HELPER(flush_delalloc_helper);
--- a/fs/btrfs/async-thread.h
+++ b/fs/btrfs/async-thread.h
@@ -80,4 +80,5 @@ void btrfs_queue_work(struct btrfs_workq
 void btrfs_destroy_workqueue(struct btrfs_workqueue *wq);
 void btrfs_workqueue_set_max(struct btrfs_workqueue *wq, int max);
 void btrfs_set_work_high_priority(struct btrfs_work *work);
+bool btrfs_workqueue_normal_congested(struct btrfs_workqueue *wq);
 #endif
--- a/fs/btrfs/delayed-inode.c
+++ b/fs/btrfs/delayed-inode.c
@@ -1375,7 +1375,8 @@ release_path:
 	total_done++;
 
 	btrfs_release_prepared_delayed_node(delayed_node);
-	if (async_work->nr == 0 || total_done < async_work->nr)
+	if ((async_work->nr == 0 && total_done < BTRFS_DELAYED_WRITEBACK) ||
+	    total_done < async_work->nr)
 		goto again;
 
 free_path:
@@ -1391,7 +1392,8 @@ static int btrfs_wq_run_delayed_node(str
 {
 	struct btrfs_async_delayed_work *async_work;
 
-	if (atomic_read(&delayed_root->items) < BTRFS_DELAYED_BACKGROUND)
+	if (atomic_read(&delayed_root->items) < BTRFS_DELAYED_BACKGROUND ||
+	    btrfs_workqueue_normal_congested(fs_info->delayed_workers))
 		return 0;
 
 	async_work = kmalloc(sizeof(*async_work), GFP_NOFS);

[PATCH 4.4 02/60] Btrfs: fix tree search logic when replaying directory entry deletes

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Robbie Ko <robbieko@synology.com>

commit 2a7bf53f577e49c43de4ffa7776056de26db65d9 upstream.

If a log tree has a layout like the following:

leaf N:
        ...
        item 240 key (282 DIR_LOG_ITEM 0) itemoff 8189 itemsize 8
                dir log end 1275809046
leaf N + 1:
        item 0 key (282 DIR_LOG_ITEM 3936149215) itemoff 16275 itemsize 8
                dir log end 18446744073709551615
        ...

When we pass the value 1275809046 + 1 as the parameter start_ret to the
function tree-log.c:find_dir_range() (done by replay_dir_deletes()), we
end up with path->slots[0] having the value 239 (points to the last item
of leaf N, item 240). Because the dir log item in that position has an
offset value smaller than *start_ret (1275809046 + 1) we need to move on
to the next leaf, however the logic for that is wrong since it compares
the current slot to the number of items in the leaf, which is smaller
and therefore we don't lookup for the next leaf but instead we set the
slot to point to an item that does not exist, at slot 240, and we later
operate on that slot which has unexpected content or in the worst case
can result in an invalid memory access (accessing beyond the last page
of leaf N's extent buffer).

So fix the logic that checks when we need to lookup at the next leaf
by first incrementing the slot and only after to check if that slot
is beyond the last item of the current leaf.

Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Fixes: e02119d5a7b4 (Btrfs: Add a write ahead tree log to optimize synchronous operations)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
[Modified changelog for clarity and correctness]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/tree-log.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -1923,12 +1923,11 @@ static noinline int find_dir_range(struc
 next:
 	/* check the next slot in the tree to see if it is a valid item */
 	nritems = btrfs_header_nritems(path->nodes[0]);
+	path->slots[0]++;
 	if (path->slots[0] >= nritems) {
 		ret = btrfs_next_leaf(root, path);
 		if (ret)
 			goto out;
-	} else {
-		path->slots[0]++;
 	}
 
 	btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]);

[PATCH 4.4 03/60] btrfs: store and load values of stripes_min/stripes_max in balance status item

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Sterba <dsterba@suse.com>

commit ed0df618b1b06d7431ee4d985317fc5419a5d559 upstream.

The balance status item contains currently known filter values, but the
stripes filter was unintentionally not among them. This would mean, that
interrupted and automatically restarted balance does not apply the
stripe filters.

Fixes: dee32d0ac3719ef8d640efaf0884111df444730f
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/ctree.h |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -3070,6 +3070,8 @@ btrfs_disk_balance_args_to_cpu(struct bt
 	cpu->target = le64_to_cpu(disk->target);
 	cpu->flags = le64_to_cpu(disk->flags);
 	cpu->limit = le64_to_cpu(disk->limit);
+	cpu->stripes_min = le32_to_cpu(disk->stripes_min);
+	cpu->stripes_max = le32_to_cpu(disk->stripes_max);
 }
 
 static inline void
@@ -3088,6 +3090,8 @@ btrfs_cpu_balance_args_to_disk(struct bt
 	disk->target = cpu_to_le64(cpu->target);
 	disk->flags = cpu_to_le64(cpu->flags);
 	disk->limit = cpu_to_le64(cpu->limit);
+	disk->stripes_min = cpu_to_le32(cpu->stripes_min);
+	disk->stripes_max = cpu_to_le32(cpu->stripes_max);
 }
 
 /* struct btrfs_super_block */

[PATCH 4.4 04/60] Btrfs: fix qgroup rescan worker initialization

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Filipe Manana <fdmanana@suse.com>

commit 8d9eddad19467b008e0c881bc3133d7da94b7ec1 upstream.

We were setting the qgroup_rescan_running flag to true only after the
rescan worker started (which is a task run by a queue). So if a user
space task starts a rescan and immediately after asks to wait for the
rescan worker to finish, this second call might happen before the rescan
worker task starts running, in which case the rescan wait ioctl returns
immediatley, not waiting for the rescan worker to finish.

This was making the fstest btrfs/022 fail very often.

Fixes: d2c609b834d6 (btrfs: properly track when rescan worker is running)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/qgroup.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -2283,10 +2283,6 @@ static void btrfs_qgroup_rescan_worker(s
 	int err = -ENOMEM;
 	int ret = 0;
 
-	mutex_lock(&fs_info->qgroup_rescan_lock);
-	fs_info->qgroup_rescan_running = true;
-	mutex_unlock(&fs_info->qgroup_rescan_lock);
-
 	path = btrfs_alloc_path();
 	if (!path)
 		goto out;
@@ -2397,6 +2393,7 @@ qgroup_rescan_init(struct btrfs_fs_info
 		sizeof(fs_info->qgroup_rescan_progress));
 	fs_info->qgroup_rescan_progress.objectid = progress_objectid;
 	init_completion(&fs_info->qgroup_rescan_completion);
+	fs_info->qgroup_rescan_running = true;
 
 	spin_unlock(&fs_info->qgroup_lock);
 	mutex_unlock(&fs_info->qgroup_rescan_lock);

[PATCH 4.4 05/60] USB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniele Palmas <dnlplm@gmail.com>

commit 5b09eff0c379002527ad72ea5ea38f25da8a8650 upstream.

This patch adds support for PIDs 0x1040, 0x1041 of Telit LE922A.

Since the interface positions are the same than the ones used
for other Telit compositions, previous defined blacklists are used.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -268,6 +268,8 @@ static void option_instat_callback(struc
 #define TELIT_PRODUCT_CC864_SINGLE		0x1006
 #define TELIT_PRODUCT_DE910_DUAL		0x1010
 #define TELIT_PRODUCT_UE910_V2			0x1012
+#define TELIT_PRODUCT_LE922_USBCFG1		0x1040
+#define TELIT_PRODUCT_LE922_USBCFG2		0x1041
 #define TELIT_PRODUCT_LE922_USBCFG0		0x1042
 #define TELIT_PRODUCT_LE922_USBCFG3		0x1043
 #define TELIT_PRODUCT_LE922_USBCFG5		0x1045
@@ -1210,6 +1212,10 @@ static const struct usb_device_id option
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG0),
 		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG1),
+		.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG2),
+		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG3),
 		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff),

[PATCH 4.4 06/60] USB: serial: option: add dlink dwm-158

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Giuseppe Lippolis <giu.lippolis@gmail.com>

commit d8a12b7117b42fd708f1e908498350232bdbd5ff upstream.

Adding registration for 3G modem DWM-158 in usb-serial-option

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1995,6 +1995,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x02, 0x01) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d04, 0xff) },			/* D-Link DWM-158 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e19, 0xff),			/* D-Link DWM-221 B1 */
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */

[PATCH 4.4 07/60] USB: serial: kl5kusb105: fix open error path

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 6774d5f53271d5f60464f824748995b71da401ab upstream.

Kill urbs and disable read before returning from open on failure to
retrieve the line state.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/kl5kusb105.c |   33 ++++++++++++++++++++++++---------
 1 file changed, 24 insertions(+), 9 deletions(-)

--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -296,7 +296,7 @@ static int  klsi_105_open(struct tty_str
 	rc = usb_serial_generic_open(tty, port);
 	if (rc) {
 		retval = rc;
-		goto exit;
+		goto err_free_cfg;
 	}
 
 	rc = usb_control_msg(port->serial->dev,
@@ -315,17 +315,32 @@ static int  klsi_105_open(struct tty_str
 		dev_dbg(&port->dev, "%s - enabled reading\n", __func__);
 
 	rc = klsi_105_get_line_state(port, &line_state);
-	if (rc >= 0) {
-		spin_lock_irqsave(&priv->lock, flags);
-		priv->line_state = line_state;
-		spin_unlock_irqrestore(&priv->lock, flags);
-		dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, line_state);
-		retval = 0;
-	} else
+	if (rc < 0) {
 		retval = rc;
+		goto err_disable_read;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->line_state = line_state;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__,
+			line_state);
+
+	return 0;
 
-exit:
+err_disable_read:
+	usb_control_msg(port->serial->dev,
+			     usb_sndctrlpipe(port->serial->dev, 0),
+			     KL5KUSB105A_SIO_CONFIGURE,
+			     USB_TYPE_VENDOR | USB_DIR_OUT,
+			     KL5KUSB105A_SIO_CONFIGURE_READ_OFF,
+			     0, /* index */
+			     NULL, 0,
+			     KLSI_TIMEOUT);
+	usb_serial_generic_close(port);
+err_free_cfg:
 	kfree(cfg);
+
 	return retval;
 }
 

[PATCH 4.4 08/60] USB: cdc-acm: add device id for GW Instek AFG-125

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nathaniel Quillin <ndq@google.com>

commit 301216044e4c27d5a7323c1fa766266fad00db5e upstream.

Add device-id entry for GW Instek AFG-125, which has a byte swapped
bInterfaceSubClass (0x20).

Signed-off-by: Nathaniel Quillin <ndq@google.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/cdc-acm.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1708,6 +1708,7 @@ static const struct usb_device_id acm_id
 	{ USB_DEVICE(0x20df, 0x0001), /* Simtec Electronics Entropy Key */
 	.driver_info = QUIRK_CONTROL_LINE_STATE, },
 	{ USB_DEVICE(0x2184, 0x001c) },	/* GW Instek AFG-2225 */
+	{ USB_DEVICE(0x2184, 0x0036) },	/* GW Instek AFG-125 */
 	{ USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
 	},
 	/* Motorola H24 HSPA module: */

[PATCH 4.4 09/60] usb: hub: Fix auto-remount of safely removed or ejected USB-3 devices

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit 37be66767e3cae4fd16e064d8bb7f9f72bf5c045 upstream.

USB-3 does not have any link state that will avoid negotiating a connection
with a plugged-in cable but will signal the host when the cable is
unplugged.

For USB-3 we used to first set the link to Disabled, then to RxDdetect to
be able to detect cable connects or disconnects. But in RxDetect the
connected device is detected again and eventually enabled.

Instead set the link into U3 and disable remote wakeups for the device.
This is what Windows does, and what Alan Stern suggested.

Cc: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/hub.c |  101 +++++++++++++++++--------------------------------
 1 file changed, 36 insertions(+), 65 deletions(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -101,6 +101,8 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rws
 
 static void hub_release(struct kref *kref);
 static int usb_reset_and_verify_device(struct usb_device *udev);
+static void hub_usb3_port_prepare_disable(struct usb_hub *hub,
+					  struct usb_port *port_dev);
 
 static inline char *portspeed(struct usb_hub *hub, int portstatus)
 {
@@ -883,82 +885,28 @@ static int hub_set_port_link_state(struc
 }
 
 /*
- * If USB 3.0 ports are placed into the Disabled state, they will no longer
- * detect any device connects or disconnects.  This is generally not what the
- * USB core wants, since it expects a disabled port to produce a port status
- * change event when a new device connects.
- *
- * Instead, set the link state to Disabled, wait for the link to settle into
- * that state, clear any change bits, and then put the port into the RxDetect
- * state.
+ * USB-3 does not have a similar link state as USB-2 that will avoid negotiating
+ * a connection with a plugged-in cable but will signal the host when the cable
+ * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices
  */
-static int hub_usb3_port_disable(struct usb_hub *hub, int port1)
-{
-	int ret;
-	int total_time;
-	u16 portchange, portstatus;
-
-	if (!hub_is_superspeed(hub->hdev))
-		return -EINVAL;
-
-	ret = hub_port_status(hub, port1, &portstatus, &portchange);
-	if (ret < 0)
-		return ret;
-
-	/*
-	 * USB controller Advanced Micro Devices, Inc. [AMD] FCH USB XHCI
-	 * Controller [1022:7814] will have spurious result making the following
-	 * usb 3.0 device hotplugging route to the 2.0 root hub and recognized
-	 * as high-speed device if we set the usb 3.0 port link state to
-	 * Disabled. Since it's already in USB_SS_PORT_LS_RX_DETECT state, we
-	 * check the state here to avoid the bug.
-	 */
-	if ((portstatus & USB_PORT_STAT_LINK_STATE) ==
-				USB_SS_PORT_LS_RX_DETECT) {
-		dev_dbg(&hub->ports[port1 - 1]->dev,
-			 "Not disabling port; link state is RxDetect\n");
-		return ret;
-	}
-
-	ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED);
-	if (ret)
-		return ret;
-
-	/* Wait for the link to enter the disabled state. */
-	for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) {
-		ret = hub_port_status(hub, port1, &portstatus, &portchange);
-		if (ret < 0)
-			return ret;
-
-		if ((portstatus & USB_PORT_STAT_LINK_STATE) ==
-				USB_SS_PORT_LS_SS_DISABLED)
-			break;
-		if (total_time >= HUB_DEBOUNCE_TIMEOUT)
-			break;
-		msleep(HUB_DEBOUNCE_STEP);
-	}
-	if (total_time >= HUB_DEBOUNCE_TIMEOUT)
-		dev_warn(&hub->ports[port1 - 1]->dev,
-				"Could not disable after %d ms\n", total_time);
-
-	return hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_RX_DETECT);
-}
-
 static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
 {
 	struct usb_port *port_dev = hub->ports[port1 - 1];
 	struct usb_device *hdev = hub->hdev;
 	int ret = 0;
 
-	if (port_dev->child && set_state)
-		usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
 	if (!hub->error) {
-		if (hub_is_superspeed(hub->hdev))
-			ret = hub_usb3_port_disable(hub, port1);
-		else
+		if (hub_is_superspeed(hub->hdev)) {
+			hub_usb3_port_prepare_disable(hub, port_dev);
+			ret = hub_set_port_link_state(hub, port_dev->portnum,
+						      USB_SS_PORT_LS_U3);
+		} else {
 			ret = usb_clear_port_feature(hdev, port1,
 					USB_PORT_FEAT_ENABLE);
+		}
 	}
+	if (port_dev->child && set_state)
+		usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
 	if (ret && ret != -ENODEV)
 		dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret);
 	return ret;
@@ -4073,6 +4021,26 @@ void usb_unlocked_enable_lpm(struct usb_
 }
 EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm);
 
+/* usb3 devices use U3 for disabled, make sure remote wakeup is disabled */
+static void hub_usb3_port_prepare_disable(struct usb_hub *hub,
+					  struct usb_port *port_dev)
+{
+	struct usb_device *udev = port_dev->child;
+	int ret;
+
+	if (udev && udev->port_is_suspended && udev->do_remote_wakeup) {
+		ret = hub_set_port_link_state(hub, port_dev->portnum,
+					      USB_SS_PORT_LS_U0);
+		if (!ret) {
+			msleep(USB_RESUME_TIMEOUT);
+			ret = usb_disable_remote_wakeup(udev);
+		}
+		if (ret)
+			dev_warn(&udev->dev,
+				 "Port disable: can't disable remote wake\n");
+		udev->do_remote_wakeup = 0;
+	}
+}
 
 #else	/* CONFIG_PM */
 
@@ -4080,6 +4048,9 @@ EXPORT_SYMBOL_GPL(usb_unlocked_enable_lp
 #define hub_resume		NULL
 #define hub_reset_resume	NULL
 
+static inline void hub_usb3_port_prepare_disable(struct usb_hub *hub,
+						 struct usb_port *port_dev) { }
+
 int usb_disable_lpm(struct usb_device *udev)
 {
 	return 0;

[PATCH 4.4 10/60] usb: gadget: f_uac2: fix error handling at afunc_bind

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Chen <peter.chen@nxp.com>

commit f1d3861d63a5d79b8968a02eea1dcb01bb684e62 upstream.

The current error handling flow uses incorrect goto label, fix it

Fixes: d12a8727171c ("usb: gadget: function: Remove redundant usb_free_all_descriptors")
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/function/f_uac2.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -1079,13 +1079,13 @@ afunc_bind(struct usb_configuration *cfg
 	agdev->out_ep = usb_ep_autoconfig(gadget, &fs_epout_desc);
 	if (!agdev->out_ep) {
 		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
-		goto err;
+		return ret;
 	}
 
 	agdev->in_ep = usb_ep_autoconfig(gadget, &fs_epin_desc);
 	if (!agdev->in_ep) {
 		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
-		goto err;
+		return ret;
 	}
 
 	uac2->p_prm.uac2 = uac2;
@@ -1102,7 +1102,7 @@ afunc_bind(struct usb_configuration *cfg
 
 	ret = usb_assign_descriptors(fn, fs_audio_desc, hs_audio_desc, NULL);
 	if (ret)
-		goto err;
+		return ret;
 
 	prm = &agdev->uac2.c_prm;
 	prm->max_psize = hs_epout_desc.wMaxPacketSize;
@@ -1117,19 +1117,19 @@ afunc_bind(struct usb_configuration *cfg
 	prm->rbuf = kzalloc(prm->max_psize * USB_XFERS, GFP_KERNEL);
 	if (!prm->rbuf) {
 		prm->max_psize = 0;
-		goto err_free_descs;
+		goto err;
 	}
 
 	ret = alsa_uac2_init(agdev);
 	if (ret)
-		goto err_free_descs;
+		goto err;
 	return 0;
 
-err_free_descs:
-	usb_free_all_descriptors(fn);
 err:
 	kfree(agdev->uac2.p_prm.rbuf);
 	kfree(agdev->uac2.c_prm.rbuf);
+err_free_descs:
+	usb_free_all_descriptors(fn);
 	return -EINVAL;
 }
 

[PATCH 4.4 11/60] usb: gadget: composite: correctly initialize ep->maxpacket

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felipe Balbi <felipe.balbi@linux.intel.com>

commit e8f29bb719b47a234f33b0af62974d7a9521a52c upstream.

usb_endpoint_maxp() returns wMaxPacketSize in its
raw form. Without taking into consideration that it
also contains other bits reserved for isochronous
endpoints.

This patch fixes one occasion where this is a
problem by making sure that we initialize
ep->maxpacket only with lower 10 bits of the value
returned by usb_endpoint_maxp(). Note that seperate
patches will be necessary to audit all call sites of
usb_endpoint_maxp() and make sure that
usb_endpoint_maxp() only returns lower 10 bits of
wMaxPacketSize.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/composite.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -144,7 +144,7 @@ int config_ep_by_speed(struct usb_gadget
 
 ep_found:
 	/* commit results */
-	_ep->maxpacket = usb_endpoint_maxp(chosen_desc);
+	_ep->maxpacket = usb_endpoint_maxp(chosen_desc) & 0x7ff;
 	_ep->desc = chosen_desc;
 	_ep->comp_desc = NULL;
 	_ep->maxburst = 0;

[PATCH 4.4 12/60] USB: UHCI: report non-PME wakeup signalling for Intel hardware

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit ccdb6be9ec6580ef69f68949ebe26e0fb58a6fb0 upstream.

The UHCI controllers in Intel chipsets rely on a platform-specific non-PME
mechanism for wakeup signalling.  They can generate wakeup signals even
though they don't support PME.

We need to let the USB core know this so that it will enable runtime
suspend for UHCI controllers.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/uhci-pci.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/host/uhci-pci.c
+++ b/drivers/usb/host/uhci-pci.c
@@ -129,6 +129,10 @@ static int uhci_pci_init(struct usb_hcd
 	if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_HP)
 		uhci->wait_for_hp = 1;
 
+	/* Intel controllers use non-PME wakeup signalling */
+	if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_INTEL)
+		device_set_run_wake(uhci_dev(uhci), 1);
+
 	/* Set up pointers to PCI-specific functions */
 	uhci->reset_hc = uhci_pci_reset_hc;
 	uhci->check_and_reset_hc = uhci_pci_check_and_reset_hc;

[PATCH 4.4 13/60] ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirks

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Con Kolivas <con@kolivas.org>

commit 82ffb6fc637150b279f49e174166d2aa3853eaf4 upstream.

The Logitech QuickCam Communicate Deluxe/S7500 microphone fails with the
following warning.

[    6.778995] usb 2-1.2.2.2: Warning! Unlikely big volume range (=3072),
cval->res is probably wrong.
[    6.778996] usb 2-1.2.2.2: [5] FU [Mic Capture Volume] ch = 1, val =
4608/7680/1

Adding it to the list of devices in volume_control_quirks makes it work
properly, fixing related typo.

Signed-off-by: Con Kolivas <kernel@kolivas.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/mixer.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -931,9 +931,10 @@ static void volume_control_quirks(struct
 	case USB_ID(0x046d, 0x0826): /* HD Webcam c525 */
 	case USB_ID(0x046d, 0x08ca): /* Logitech Quickcam Fusion */
 	case USB_ID(0x046d, 0x0991):
+	case USB_ID(0x046d, 0x09a2): /* QuickCam Communicate Deluxe/S7500 */
 	/* Most audio usb devices lie about volume resolution.
 	 * Most Logitech webcams have res = 384.
-	 * Proboly there is some logitech magic behind this number --fishor
+	 * Probably there is some logitech magic behind this number --fishor
 	 */
 		if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
 			usb_audio_info(chip,

[PATCH 4.4 14/60] ALSA: hiface: Fix M2Tech hiFace driver sampling rate change

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jussi Laako <jussi@sonarnerd.net>

commit 995c6a7fd9b9212abdf01160f6ce3193176be503 upstream.

Sampling rate changes after first set one are not reflected to the
hardware, while driver and ALSA think the rate has been changed.

Fix the problem by properly stopping the interface at the beginning of
prepare call, allowing new rate to be set to the hardware. This keeps
the hardware in sync with the driver.

Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/hiface/pcm.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/usb/hiface/pcm.c
+++ b/sound/usb/hiface/pcm.c
@@ -445,6 +445,8 @@ static int hiface_pcm_prepare(struct snd
 
 	mutex_lock(&rt->stream_mutex);
 
+	hiface_pcm_stream_stop(rt);
+
 	sub->dma_off = 0;
 	sub->period_off = 0;
 

[PATCH 4.4 15/60] ALSA: hda/ca0132 - Add quirk for Alienware 15 R2 2016

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sven Hahne <hahne@zeitkunst.eu>

commit b5337cfe067e96b8a98699da90c7dcd2bec21133 upstream.

I'm using an Alienware 15 R2 and had to use the alienware quirks to
get my headphone output working.

I fixed it by adding, SND_PCI_QUIRK(0x1028, 0x0708, "Alienware 15 R2
2016", QUIRK_ALIENWARE) to the patch.

Signed-off-by: Sven Hahne <hahne@zeitkunst.eu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_ca0132.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -780,6 +780,7 @@ static const struct hda_pintbl alienware
 static const struct snd_pci_quirk ca0132_quirks[] = {
 	SND_PCI_QUIRK(0x1028, 0x0685, "Alienware 15 2015", QUIRK_ALIENWARE),
 	SND_PCI_QUIRK(0x1028, 0x0688, "Alienware 17 2015", QUIRK_ALIENWARE),
+	SND_PCI_QUIRK(0x1028, 0x0708, "Alienware 15 R2 2016", QUIRK_ALIENWARE),
 	{}
 };
 

[PATCH 4.4 16/60] ALSA: hda - ignore the assoc and seq when comparing pin configurations

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hui Wang <hui.wang@canonical.com>

commit 64047d7f4912de1769d1bf0d34c6322494b13779 upstream.

More and more pin configurations have been adding to the pin quirk
table, lots of them are only different from assoc and seq, but they
all apply to the same QUIRK_FIXUP, if we don't compare assoc and seq
when matching pin configurations, it will greatly reduce the pin
quirk table size.

We have tested this change on a couple of Dell laptops, it worked
well.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/hda_auto_parser.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/hda_auto_parser.c
+++ b/sound/pci/hda/hda_auto_parser.c
@@ -901,7 +901,7 @@ static bool pin_config_match(struct hda_
 		for (; t_pins->nid; t_pins++) {
 			if (t_pins->nid == nid) {
 				found = 1;
-				if (t_pins->val == cfg)
+				if ((t_pins->val & 0xfffffff0) == (cfg & 0xfffffff0))
 					break;
 				else if ((cfg & 0xf0000000) == 0x40000000 && (t_pins->val & 0xf0000000) == 0x40000000)
 					break;

[PATCH 4.4 17/60] ALSA: hda - fix headset-mic problem on a Dell laptop

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hui Wang <hui.wang@canonical.com>

commit 989dbe4a30728c047316ab87e5fa8b609951ce7c upstream.

This group of new pins is not in the pin quirk table yet, adding
them to the pin quirk table to fix the headset-mic problem.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5899,6 +5899,9 @@ static const struct snd_hda_pin_quirk al
 		{0x12, 0x90a60180},
 		{0x14, 0x90170120},
 		{0x21, 0x02211030}),
+	SND_HDA_PIN_QUIRK(0x10ec0255, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE,
+		{0x1b, 0x01011020},
+		{0x21, 0x02211010}),
 	SND_HDA_PIN_QUIRK(0x10ec0256, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE,
 		{0x12, 0x90a60160},
 		{0x14, 0x90170120},

[PATCH 4.4 18/60] ALSA: hda - Gate the mic jack on HP Z1 Gen3 AiO

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit f73cd43ac3b41c0f09a126387f302bbc0d9c726d upstream.

HP Z1 Gen3 AiO with Conexant codec doesn't give an unsolicited event
to the headset mic pin upon the jack plugging, it reports only to the
headphone pin.  It results in the missing mic switching.  Let's fix up
by simply gating the jack event.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_conexant.c |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)

--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -262,6 +262,7 @@ enum {
 	CXT_FIXUP_CAP_MIX_AMP_5047,
 	CXT_FIXUP_MUTE_LED_EAPD,
 	CXT_FIXUP_HP_SPECTRE,
+	CXT_FIXUP_HP_GATE_MIC,
 };
 
 /* for hda_fixup_thinkpad_acpi() */
@@ -633,6 +634,17 @@ static void cxt_fixup_cap_mix_amp_5047(s
 				  (1 << AC_AMPCAP_MUTE_SHIFT));
 }
 
+static void cxt_fixup_hp_gate_mic_jack(struct hda_codec *codec,
+				       const struct hda_fixup *fix,
+				       int action)
+{
+	/* the mic pin (0x19) doesn't give an unsolicited event;
+	 * probe the mic pin together with the headphone pin (0x16)
+	 */
+	if (action == HDA_FIXUP_ACT_PROBE)
+		snd_hda_jack_set_gating_jack(codec, 0x19, 0x16);
+}
+
 /* ThinkPad X200 & co with cxt5051 */
 static const struct hda_pintbl cxt_pincfg_lenovo_x200[] = {
 	{ 0x16, 0x042140ff }, /* HP (seq# overridden) */
@@ -774,6 +786,10 @@ static const struct hda_fixup cxt_fixups
 			{ }
 		}
 	},
+	[CXT_FIXUP_HP_GATE_MIC] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = cxt_fixup_hp_gate_mic_jack,
+	},
 };
 
 static const struct snd_pci_quirk cxt5045_fixups[] = {
@@ -824,6 +840,7 @@ static const struct snd_pci_quirk cxt506
 	SND_PCI_QUIRK(0x1025, 0x054c, "Acer Aspire 3830TG", CXT_FIXUP_ASPIRE_DMIC),
 	SND_PCI_QUIRK(0x1025, 0x054f, "Acer Aspire 4830T", CXT_FIXUP_ASPIRE_DMIC),
 	SND_PCI_QUIRK(0x103c, 0x8174, "HP Spectre x360", CXT_FIXUP_HP_SPECTRE),
+	SND_PCI_QUIRK(0x103c, 0x8115, "HP Z1 Gen3", CXT_FIXUP_HP_GATE_MIC),
 	SND_PCI_QUIRK(0x1043, 0x138d, "Asus", CXT_FIXUP_HEADPHONE_MIC_PIN),
 	SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT_FIXUP_OLPC_XO),
 	SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo T400", CXT_PINCFG_LENOVO_TP410),

[PATCH 4.4 19/60] ALSA: hda: when comparing pin configurations, ignore assoc in addition to seq

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

commit 5e0ad0d8747f3e4803a9c3d96d64dd7332506d3c upstream.

Commit [64047d7f4912 ALSA: hda - ignore the assoc and seq when comparing
pin configurations] intented to ignore both seq and assoc at pin
comparing, but it only ignored seq. So that commit may still fail to
match pins on some machines.
Change the bitmask to also ignore assoc.

v2: Use macro to do bit masking.

Thanks to Hui Wang for the analysis.

Fixes: 64047d7f4912 ("ALSA: hda - ignore the assoc and seq when comparing...")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/hda_auto_parser.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/sound/pci/hda/hda_auto_parser.c
+++ b/sound/pci/hda/hda_auto_parser.c
@@ -884,6 +884,8 @@ void snd_hda_apply_fixup(struct hda_code
 }
 EXPORT_SYMBOL_GPL(snd_hda_apply_fixup);
 
+#define IGNORE_SEQ_ASSOC (~(AC_DEFCFG_SEQUENCE | AC_DEFCFG_DEF_ASSOC))
+
 static bool pin_config_match(struct hda_codec *codec,
 			     const struct hda_pintbl *pins)
 {
@@ -901,7 +903,7 @@ static bool pin_config_match(struct hda_
 		for (; t_pins->nid; t_pins++) {
 			if (t_pins->nid == nid) {
 				found = 1;
-				if ((t_pins->val & 0xfffffff0) == (cfg & 0xfffffff0))
+				if ((t_pins->val & IGNORE_SEQ_ASSOC) == (cfg & IGNORE_SEQ_ASSOC))
 					break;
 				else if ((cfg & 0xf0000000) == 0x40000000 && (t_pins->val & 0xf0000000) == 0x40000000)
 					break;

[PATCH 4.4 20/60] clk: ti: omap36xx: Work around sprz319 advisory 2.1

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Watts <rrw@kynesim.co.uk>

commit 035cd485a47dda64f25ccf8a90b11a07d0b7aa7a upstream.

The OMAP36xx DPLL5, driving EHCI USB, can be subject to a long-term
frequency drift. The frequency drift magnitude depends on the VCO update
rate, which is inversely proportional to the PLL divider. The kernel
DPLL configuration code results in a high value for the divider, leading
to a long term drift high enough to cause USB transmission errors. In
the worst case the USB PHY's ULPI interface can stop responding,
breaking USB operation completely. This manifests itself on the
Beagleboard xM by the LAN9514 reporting 'Cannot enable port 2. Maybe the
cable is bad?' in the kernel log.

Errata sprz319 advisory 2.1 documents PLL values that minimize the
drift. Use them automatically when DPLL5 is used for USB operation,
which we detect based on the requested clock rate. The clock framework
will still compute the PLL parameters and resulting rate as usual, but
the PLL M and N values will then be overridden. This can result in the
effective clock rate being slightly different than the rate cached by
the clock framework, but won't cause any adverse effect to USB
operation.

Signed-off-by: Richard Watts <rrw@kynesim.co.uk>
[Upported from v3.2 to v4.9]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Adam Ford <aford173@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clk/ti/clk-3xxx.c |   20 ++++++-------
 drivers/clk/ti/clock.h    |    9 ++++++
 drivers/clk/ti/dpll.c     |   19 ++++++++++++-
 drivers/clk/ti/dpll3xxx.c |   67 ++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 104 insertions(+), 11 deletions(-)

--- a/drivers/clk/ti/clk-3xxx.c
+++ b/drivers/clk/ti/clk-3xxx.c
@@ -22,13 +22,6 @@
 
 #include "clock.h"
 
-/*
- * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
- * that are sourced by DPLL5, and both of these require this clock
- * to be at 120 MHz for proper operation.
- */
-#define DPLL5_FREQ_FOR_USBHOST		120000000
-
 #define OMAP3430ES2_ST_DSS_IDLE_SHIFT			1
 #define OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT		5
 #define OMAP3430ES2_ST_SSI_IDLE_SHIFT			8
@@ -546,14 +539,21 @@ void __init omap3_clk_lock_dpll5(void)
 	struct clk *dpll5_clk;
 	struct clk *dpll5_m2_clk;
 
+	/*
+	 * Errata sprz319f advisory 2.1 documents a USB host clock drift issue
+	 * that can be worked around using specially crafted dpll5 settings
+	 * with a dpll5_m2 divider set to 8. Set the dpll5 rate to 8x the USB
+	 * host clock rate, its .set_rate handler() will detect that frequency
+	 * and use the errata settings.
+	 */
 	dpll5_clk = clk_get(NULL, "dpll5_ck");
-	clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
+	clk_set_rate(dpll5_clk, OMAP3_DPLL5_FREQ_FOR_USBHOST * 8);
 	clk_prepare_enable(dpll5_clk);
 
-	/* Program dpll5_m2_clk divider for no division */
+	/* Program dpll5_m2_clk divider */
 	dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
 	clk_prepare_enable(dpll5_m2_clk);
-	clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
+	clk_set_rate(dpll5_m2_clk, OMAP3_DPLL5_FREQ_FOR_USBHOST);
 
 	clk_disable_unprepare(dpll5_m2_clk);
 	clk_disable_unprepare(dpll5_clk);
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -257,11 +257,20 @@ long omap2_dpll_round_rate(struct clk_hw
 unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 				    unsigned long parent_rate);
 
+/*
+ * OMAP3_DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
+ * that are sourced by DPLL5, and both of these require this clock
+ * to be at 120 MHz for proper operation.
+ */
+#define OMAP3_DPLL5_FREQ_FOR_USBHOST	120000000
+
 unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
 int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
 			 unsigned long parent_rate);
 int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
 				    unsigned long parent_rate, u8 index);
+int omap3_dpll5_set_rate(struct clk_hw *hw, unsigned long rate,
+			 unsigned long parent_rate);
 void omap3_clk_lock_dpll5(void);
 
 unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
--- a/drivers/clk/ti/dpll.c
+++ b/drivers/clk/ti/dpll.c
@@ -114,6 +114,18 @@ static const struct clk_ops omap3_dpll_c
 	.round_rate	= &omap2_dpll_round_rate,
 };
 
+static const struct clk_ops omap3_dpll5_ck_ops = {
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+	.get_parent	= &omap2_init_dpll_parent,
+	.recalc_rate	= &omap3_dpll_recalc,
+	.set_rate	= &omap3_dpll5_set_rate,
+	.set_parent	= &omap3_noncore_dpll_set_parent,
+	.set_rate_and_parent	= &omap3_noncore_dpll_set_rate_and_parent,
+	.determine_rate	= &omap3_noncore_dpll_determine_rate,
+	.round_rate	= &omap2_dpll_round_rate,
+};
+
 static const struct clk_ops omap3_dpll_per_ck_ops = {
 	.enable		= &omap3_noncore_dpll_enable,
 	.disable	= &omap3_noncore_dpll_disable,
@@ -461,7 +473,12 @@ static void __init of_ti_omap3_dpll_setu
 		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
 	};
 
-	of_ti_dpll_setup(node, &omap3_dpll_ck_ops, &dd);
+	if ((of_machine_is_compatible("ti,omap3630") ||
+	     of_machine_is_compatible("ti,omap36xx")) &&
+	    !strcmp(node->name, "dpll5_ck"))
+		of_ti_dpll_setup(node, &omap3_dpll5_ck_ops, &dd);
+	else
+		of_ti_dpll_setup(node, &omap3_dpll_ck_ops, &dd);
 }
 CLK_OF_DECLARE(ti_omap3_dpll_clock, "ti,omap3-dpll-clock",
 	       of_ti_omap3_dpll_setup);
--- a/drivers/clk/ti/dpll3xxx.c
+++ b/drivers/clk/ti/dpll3xxx.c
@@ -815,3 +815,70 @@ int omap3_dpll4_set_rate_and_parent(stru
 	return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate,
 						      index);
 }
+
+/* Apply DM3730 errata sprz319 advisory 2.1. */
+static bool omap3_dpll5_apply_errata(struct clk_hw *hw,
+				     unsigned long parent_rate)
+{
+	struct omap3_dpll5_settings {
+		unsigned int rate, m, n;
+	};
+
+	static const struct omap3_dpll5_settings precomputed[] = {
+		/*
+		 * From DM3730 errata advisory 2.1, table 35 and 36.
+		 * The N value is increased by 1 compared to the tables as the
+		 * errata lists register values while last_rounded_field is the
+		 * real divider value.
+		 */
+		{ 12000000,  80,  0 + 1 },
+		{ 13000000, 443,  5 + 1 },
+		{ 19200000,  50,  0 + 1 },
+		{ 26000000, 443, 11 + 1 },
+		{ 38400000,  25,  0 + 1 }
+	};
+
+	const struct omap3_dpll5_settings *d;
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	struct dpll_data *dd;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(precomputed); ++i) {
+		if (parent_rate == precomputed[i].rate)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(precomputed))
+		return false;
+
+	d = &precomputed[i];
+
+	/* Update the M, N and rounded rate values and program the DPLL. */
+	dd = clk->dpll_data;
+	dd->last_rounded_m = d->m;
+	dd->last_rounded_n = d->n;
+	dd->last_rounded_rate = div_u64((u64)parent_rate * d->m, d->n);
+	omap3_noncore_dpll_program(clk, 0);
+
+	return true;
+}
+
+/**
+ * omap3_dpll5_set_rate - set rate for omap3 dpll5
+ * @hw: clock to change
+ * @rate: target rate for clock
+ * @parent_rate: rate of the parent clock
+ *
+ * Set rate for the DPLL5 clock. Apply the sprz319 advisory 2.1 on OMAP36xx if
+ * the DPLL is used for USB host (detected through the requested rate).
+ */
+int omap3_dpll5_set_rate(struct clk_hw *hw, unsigned long rate,
+			 unsigned long parent_rate)
+{
+	if (rate == OMAP3_DPLL5_FREQ_FOR_USBHOST * 8) {
+		if (omap3_dpll5_apply_errata(hw, parent_rate))
+			return 0;
+	}
+
+	return omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
+}

[PATCH 4.4 21/60] Btrfs: fix memory leak in reading btree blocks

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liu Bo <bo.li.liu@oracle.com>

commit 2571e739677f1e4c0c63f5ed49adcc0857923625 upstream.

So we can read a btree block via readahead or intentional read,
and we can end up with a memory leak when something happens as
follows,
1) readahead starts to read block A but does not wait for read
   completion,
2) btree_readpage_end_io_hook finds that block A is corrupted,
   and it needs to clear all block A's pages' uptodate bit.
3) meanwhile an intentional read kicks in and checks block A's
   pages' uptodate to decide which page needs to be read.
4) when some pages have the uptodate bit during 3)'s check so
   3) doesn't count them for eb->io_pages, but they are later
   cleared by 2) so we has to readpage on the page, we get
   the wrong eb->io_pages which results in a memory leak of
   this block.

This fixes the problem by firstly getting all pages's locking and
then checking pages' uptodate bit.

   t1(readahead)                              t2(readahead endio)                                       t3(the following read)
read_extent_buffer_pages                    end_bio_extent_readpage
  for pg in eb:                                for page 0,1,2 in eb:
      if pg is uptodate:                           btree_readpage_end_io_hook(pg)
          num_reads++                              if uptodate:
  eb->io_pages = num_reads                             SetPageUptodate(pg)              _______________
  for pg in eb:                                for page 3 in eb:                                     read_extent_buffer_pages
       if pg is NOT uptodate:                      btree_readpage_end_io_hook(pg)                       for pg in eb:
           __extent_read_full_page(pg)                 sanity check reports something wrong                 if pg is uptodate:
                                                       clear_extent_buffer_uptodate(eb)                         num_reads++
                                                           for pg in eb:                                eb->io_pages = num_reads
                                                               ClearPageUptodate(page)  _______________
                                                                                                        for pg in eb:
                                                                                                            if pg is NOT uptodate:
                                                                                                                __extent_read_full_page(pg)

So t3's eb->io_pages is not consistent with the number of pages it's reading,
and during endio(), atomic_dec_and_test(&eb->io_pages) will get a negative
number so that we're not able to free the eb.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/extent_io.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -5294,11 +5294,20 @@ int read_extent_buffer_pages(struct exte
 			lock_page(page);
 		}
 		locked_pages++;
+	}
+	/*
+	 * We need to firstly lock all pages to make sure that
+	 * the uptodate bit of our pages won't be affected by
+	 * clear_extent_buffer_uptodate().
+	 */
+	for (i = start_i; i < num_pages; i++) {
+		page = eb->pages[i];
 		if (!PageUptodate(page)) {
 			num_reads++;
 			all_uptodate = 0;
 		}
 	}
+
 	if (all_uptodate) {
 		if (start_i == 0)
 			set_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags);

[PATCH 4.4 22/60] Btrfs: bail out if block group has different mixed flag

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liu Bo <bo.li.liu@oracle.com>

commit 49303381f19ab16a371a061b67e783d3f570d56e upstream.

Currently we allow inconsistence about mixed flag
 (BTRFS_BLOCK_GROUP_METADATA | BTRFS_BLOCK_GROUP_DATA).

We'd get ENOSPC if block group has mixed flag and btrfs doesn't.
If that happens, we have one space_info with mixed flag and another
space_info only with BTRFS_BLOCK_GROUP_METADATA, and
global_block_rsv.space_info points to the latter one, but all bytes
from block_group contributes to the mixed space_info, thus all the
allocation will fail with ENOSPC.

This adds a check for the above case.

Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
[ updated message ]
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/extent-tree.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -9686,6 +9686,11 @@ int btrfs_read_block_groups(struct btrfs
 	struct extent_buffer *leaf;
 	int need_clear = 0;
 	u64 cache_gen;
+	u64 feature;
+	int mixed;
+
+	feature = btrfs_super_incompat_flags(info->super_copy);
+	mixed = !!(feature & BTRFS_FEATURE_INCOMPAT_MIXED_GROUPS);
 
 	root = info->extent_root;
 	key.objectid = 0;
@@ -9739,6 +9744,15 @@ int btrfs_read_block_groups(struct btrfs
 				   btrfs_item_ptr_offset(leaf, path->slots[0]),
 				   sizeof(cache->item));
 		cache->flags = btrfs_block_group_flags(&cache->item);
+		if (!mixed &&
+		    ((cache->flags & BTRFS_BLOCK_GROUP_METADATA) &&
+		    (cache->flags & BTRFS_BLOCK_GROUP_DATA))) {
+			btrfs_err(info,
+"bg %llu is a mixed block group but filesystem hasn't enabled mixed block groups",
+				  cache->key.objectid);
+			ret = -EINVAL;
+			goto error;
+		}
 
 		key.objectid = found_key.objectid + found_key.offset;
 		btrfs_release_path(path);

[PATCH 4.4 23/60] Btrfs: return gracefully from balance if fs tree is corrupted

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liu Bo <bo.li.liu@oracle.com>

commit 3561b9db70928f207be4570b48fc19898eeaef54 upstream.

When relocating tree blocks, we firstly get block information from
back references in the extent tree, we then search fs tree to try to
find all parents of a block.

However, if fs tree is corrupted, eg. if there're some missing
items, we could come across these WARN_ONs and BUG_ONs.

This makes us print some error messages and return gracefully
from balance.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/relocation.c |   23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -921,9 +921,16 @@ again:
 			path2->slots[level]--;
 
 		eb = path2->nodes[level];
-		WARN_ON(btrfs_node_blockptr(eb, path2->slots[level]) !=
-			cur->bytenr);
-
+		if (btrfs_node_blockptr(eb, path2->slots[level]) !=
+		    cur->bytenr) {
+			btrfs_err(root->fs_info,
+	"couldn't find block (%llu) (level %d) in tree (%llu) with key (%llu %u %llu)",
+				  cur->bytenr, level - 1, root->objectid,
+				  node_key->objectid, node_key->type,
+				  node_key->offset);
+			err = -ENOENT;
+			goto out;
+		}
 		lower = cur;
 		need_check = true;
 		for (; level < BTRFS_MAX_LEVEL; level++) {
@@ -2676,11 +2683,15 @@ static int do_relocation(struct btrfs_tr
 
 		if (!upper->eb) {
 			ret = btrfs_search_slot(trans, root, key, path, 0, 1);
-			if (ret < 0) {
-				err = ret;
+			if (ret) {
+				if (ret < 0)
+					err = ret;
+				else
+					err = -ENOENT;
+
+				btrfs_release_path(path);
 				break;
 			}
-			BUG_ON(ret > 0);
 
 			if (!upper->eb) {
 				upper->eb = path->nodes[upper->level];

[PATCH 4.4 24/60] Btrfs: dont leak reloc root nodes on error

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Josef Bacik <jbacik@fb.com>

commit 6bdf131fac2336adb1a628f992ba32384f653a55 upstream.

We don't track the reloc roots in any sort of normal way, so the only way the
root/commit_root nodes get free'd is if the relocation finishes successfully and
the reloc root is deleted.  Fix this by free'ing them in free_reloc_roots.
Thanks,

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/relocation.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -2350,6 +2350,10 @@ void free_reloc_roots(struct list_head *
 	while (!list_empty(list)) {
 		reloc_root = list_entry(list->next, struct btrfs_root,
 					root_list);
+		free_extent_buffer(reloc_root->node);
+		free_extent_buffer(reloc_root->commit_root);
+		reloc_root->node = NULL;
+		reloc_root->commit_root = NULL;
 		__del_reloc_root(reloc_root);
 	}
 }

[PATCH 4.4 25/60] Btrfs: fix memory leak in do_walk_down

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liu Bo <bo.li.liu@oracle.com>

commit a958eab0ed7fdc1b977bc25d3af6efedaa945488 upstream.

The extent buffer 'next' needs to be free'd conditionally.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/extent-tree.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -8488,6 +8488,7 @@ static noinline int do_walk_down(struct
 				       &wc->flags[level - 1]);
 	if (ret < 0) {
 		btrfs_tree_unlock(next);
+		free_extent_buffer(next);
 		return ret;
 	}
 

[PATCH 4.4 26/60] Btrfs: dont BUG() during drop snapshot

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Josef Bacik <jbacik@fb.com>

commit 4867268c57ff709a7b6b86ae6f6537d846d1443a upstream.

Really there's lots of things that can go wrong here, kill all the
BUG_ON()'s and replace the logic ones with ASSERT()'s and return EIO
instead.

Signed-off-by: Josef Bacik <jbacik@fb.com>
[ switched to btrfs_err, errors go to common label ]
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/extent-tree.c |   38 +++++++++++++++++++++++++++-----------
 1 file changed, 27 insertions(+), 11 deletions(-)

--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -8486,15 +8486,13 @@ static noinline int do_walk_down(struct
 	ret = btrfs_lookup_extent_info(trans, root, bytenr, level - 1, 1,
 				       &wc->refs[level - 1],
 				       &wc->flags[level - 1]);
-	if (ret < 0) {
-		btrfs_tree_unlock(next);
-		free_extent_buffer(next);
-		return ret;
-	}
+	if (ret < 0)
+		goto out_unlock;
 
 	if (unlikely(wc->refs[level - 1] == 0)) {
 		btrfs_err(root->fs_info, "Missing references.");
-		BUG();
+		ret = -EIO;
+		goto out_unlock;
 	}
 	*lookup_info = 0;
 
@@ -8546,7 +8544,12 @@ static noinline int do_walk_down(struct
 	}
 
 	level--;
-	BUG_ON(level != btrfs_header_level(next));
+	ASSERT(level == btrfs_header_level(next));
+	if (level != btrfs_header_level(next)) {
+		btrfs_err(root->fs_info, "mismatched level");
+		ret = -EIO;
+		goto out_unlock;
+	}
 	path->nodes[level] = next;
 	path->slots[level] = 0;
 	path->locks[level] = BTRFS_WRITE_LOCK_BLOCKING;
@@ -8561,8 +8564,15 @@ skip:
 		if (wc->flags[level] & BTRFS_BLOCK_FLAG_FULL_BACKREF) {
 			parent = path->nodes[level]->start;
 		} else {
-			BUG_ON(root->root_key.objectid !=
+			ASSERT(root->root_key.objectid ==
 			       btrfs_header_owner(path->nodes[level]));
+			if (root->root_key.objectid !=
+			    btrfs_header_owner(path->nodes[level])) {
+				btrfs_err(root->fs_info,
+						"mismatched block owner");
+				ret = -EIO;
+				goto out_unlock;
+			}
 			parent = 0;
 		}
 
@@ -8579,12 +8589,18 @@ skip:
 		}
 		ret = btrfs_free_extent(trans, root, bytenr, blocksize, parent,
 				root->root_key.objectid, level - 1, 0);
-		BUG_ON(ret); /* -ENOMEM */
+		if (ret)
+			goto out_unlock;
 	}
+
+	*lookup_info = 1;
+	ret = 1;
+
+out_unlock:
 	btrfs_tree_unlock(next);
 	free_extent_buffer(next);
-	*lookup_info = 1;
-	return 1;
+
+	return ret;
 }
 
 /*

[PATCH 4.4 27/60] btrfs: make file clone aware of fatal signals

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>

commit 69ae5e4459e43e56f03d0987e865fbac2b05af2a upstream.

Indeed this just make the behavior similar to xfs when process has
fatal signals pending, and it'll make fstests/generic/298 happy.

Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/ioctl.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -3825,6 +3825,11 @@ process_slot:
 		}
 		btrfs_release_path(path);
 		key.offset = next_key_min_offset;
+
+		if (fatal_signal_pending(current)) {
+			ret = -EINTR;
+			goto out;
+		}
 	}
 	ret = 0;
 

[PATCH 4.4 28/60] block_dev: dont test bdev->bd_contains when it is not stable

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: NeilBrown <neilb@suse.com>

commit bcc7f5b4bee8e327689a4d994022765855c807ff upstream.

bdev->bd_contains is not stable before calling __blkdev_get().
When __blkdev_get() is called on a parition with ->bd_openers == 0
it sets
  bdev->bd_contains = bdev;
which is not correct for a partition.
After a call to __blkdev_get() succeeds, ->bd_openers will be > 0
and then ->bd_contains is stable.

When FMODE_EXCL is used, blkdev_get() calls
   bd_start_claiming() ->  bd_prepare_to_claim() -> bd_may_claim()

This call happens before __blkdev_get() is called, so ->bd_contains
is not stable.  So bd_may_claim() cannot safely use ->bd_contains.
It currently tries to use it, and this can lead to a BUG_ON().

This happens when a whole device is already open with a bd_holder (in
use by dm in my particular example) and two threads race to open a
partition of that device for the first time, one opening with O_EXCL and
one without.

The thread that doesn't use O_EXCL gets through blkdev_get() to
__blkdev_get(), gains the ->bd_mutex, and sets bdev->bd_contains = bdev;

Immediately thereafter the other thread, using FMODE_EXCL, calls
bd_start_claiming() from blkdev_get().  This should fail because the
whole device has a holder, but because bdev->bd_contains == bdev
bd_may_claim() incorrectly reports success.
This thread continues and blocks on bd_mutex.

The first thread then sets bdev->bd_contains correctly and drops the mutex.
The thread using FMODE_EXCL then continues and when it calls bd_may_claim()
again in:
			BUG_ON(!bd_may_claim(bdev, whole, holder));
The BUG_ON fires.

Fix this by removing the dependency on ->bd_contains in
bd_may_claim().  As bd_may_claim() has direct access to the whole
device, it can simply test if the target bdev is the whole device.

Fixes: 6b4517a7913a ("block: implement bd_claiming and claiming block")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/block_dev.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -759,7 +759,7 @@ static bool bd_may_claim(struct block_de
 		return true;	 /* already a holder */
 	else if (bdev->bd_holder != NULL)
 		return false; 	 /* held by someone else */
-	else if (bdev->bd_contains == bdev)
+	else if (whole == bdev)
 		return true;  	 /* is a whole device which isn't held */
 
 	else if (whole->bd_holder == bd_may_claim)

[PATCH 4.4 29/60] mm: Add a user_ns owner to mm_struct and fix ptrace permission checks

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric W. Biederman <ebiederm@xmission.com>

commit bfedb589252c01fa505ac9f6f2a3d5d68d707ef4 upstream.

During exec dumpable is cleared if the file that is being executed is
not readable by the user executing the file.  A bug in
ptrace_may_access allows reading the file if the executable happens to
enter into a subordinate user namespace (aka clone(CLONE_NEWUSER),
unshare(CLONE_NEWUSER), or setns(fd, CLONE_NEWUSER).

This problem is fixed with only necessary userspace breakage by adding
a user namespace owner to mm_struct, captured at the time of exec, so
it is clear in which user namespace CAP_SYS_PTRACE must be present in
to be able to safely give read permission to the executable.

The function ptrace_may_access is modified to verify that the ptracer
has CAP_SYS_ADMIN in task->mm->user_ns instead of task->cred->user_ns.
This ensures that if the task changes it's cred into a subordinate
user namespace it does not become ptraceable.

The function ptrace_attach is modified to only set PT_PTRACE_CAP when
CAP_SYS_PTRACE is held over task->mm->user_ns.  The intent of
PT_PTRACE_CAP is to be a flag to note that whatever permission changes
the task might go through the tracer has sufficient permissions for
it not to be an issue.  task->cred->user_ns is always the same
as or descendent of mm->user_ns.  Which guarantees that having
CAP_SYS_PTRACE over mm->user_ns is the worst case for the tasks
credentials.

To prevent regressions mm->dumpable and mm->user_ns are not considered
when a task has no mm.  As simply failing ptrace_may_attach causes
regressions in privileged applications attempting to read things
such as /proc/<pid>/stat

Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Cyrill Gorcunov <gorcunov@openvz.org>
Fixes: 8409cca70561 ("userns: allow ptrace from non-init user namespaces")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/mm_types.h |    1 +
 kernel/fork.c            |    9 ++++++---
 kernel/ptrace.c          |   26 +++++++++++---------------
 mm/init-mm.c             |    2 ++
 4 files changed, 20 insertions(+), 18 deletions(-)

--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -469,6 +469,7 @@ struct mm_struct {
 	 */
 	struct task_struct __rcu *owner;
 #endif
+	struct user_namespace *user_ns;
 
 	/* store ref to file /proc/<pid>/exe symlink points to */
 	struct file __rcu *exe_file;
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -585,7 +585,8 @@ static void mm_init_owner(struct mm_stru
 #endif
 }
 
-static struct mm_struct *mm_init(struct mm_struct *mm, struct task_struct *p)
+static struct mm_struct *mm_init(struct mm_struct *mm, struct task_struct *p,
+	struct user_namespace *user_ns)
 {
 	mm->mmap = NULL;
 	mm->mm_rb = RB_ROOT;
@@ -625,6 +626,7 @@ static struct mm_struct *mm_init(struct
 	if (init_new_context(p, mm))
 		goto fail_nocontext;
 
+	mm->user_ns = get_user_ns(user_ns);
 	return mm;
 
 fail_nocontext:
@@ -670,7 +672,7 @@ struct mm_struct *mm_alloc(void)
 		return NULL;
 
 	memset(mm, 0, sizeof(*mm));
-	return mm_init(mm, current);
+	return mm_init(mm, current, current_user_ns());
 }
 
 /*
@@ -685,6 +687,7 @@ void __mmdrop(struct mm_struct *mm)
 	destroy_context(mm);
 	mmu_notifier_mm_destroy(mm);
 	check_mm(mm);
+	put_user_ns(mm->user_ns);
 	free_mm(mm);
 }
 EXPORT_SYMBOL_GPL(__mmdrop);
@@ -942,7 +945,7 @@ static struct mm_struct *dup_mm(struct t
 
 	memcpy(mm, oldmm, sizeof(*mm));
 
-	if (!mm_init(mm, tsk))
+	if (!mm_init(mm, tsk, mm->user_ns))
 		goto fail_nomem;
 
 	err = dup_mmap(mm, oldmm);
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -219,7 +219,7 @@ static int ptrace_has_cap(struct user_na
 static int __ptrace_may_access(struct task_struct *task, unsigned int mode)
 {
 	const struct cred *cred = current_cred(), *tcred;
-	int dumpable = 0;
+	struct mm_struct *mm;
 	kuid_t caller_uid;
 	kgid_t caller_gid;
 
@@ -270,16 +270,11 @@ static int __ptrace_may_access(struct ta
 	return -EPERM;
 ok:
 	rcu_read_unlock();
-	smp_rmb();
-	if (task->mm)
-		dumpable = get_dumpable(task->mm);
-	rcu_read_lock();
-	if (dumpable != SUID_DUMP_USER &&
-	    !ptrace_has_cap(__task_cred(task)->user_ns, mode)) {
-		rcu_read_unlock();
-		return -EPERM;
-	}
-	rcu_read_unlock();
+	mm = task->mm;
+	if (mm &&
+	    ((get_dumpable(mm) != SUID_DUMP_USER) &&
+	     !ptrace_has_cap(mm->user_ns, mode)))
+	    return -EPERM;
 
 	return security_ptrace_access_check(task, mode);
 }
@@ -330,6 +325,11 @@ static int ptrace_attach(struct task_str
 
 	task_lock(task);
 	retval = __ptrace_may_access(task, PTRACE_MODE_ATTACH_REALCREDS);
+	if (!retval) {
+		struct mm_struct *mm = task->mm;
+		if (mm && ns_capable(mm->user_ns, CAP_SYS_PTRACE))
+			flags |= PT_PTRACE_CAP;
+	}
 	task_unlock(task);
 	if (retval)
 		goto unlock_creds;
@@ -343,10 +343,6 @@ static int ptrace_attach(struct task_str
 
 	if (seize)
 		flags |= PT_SEIZED;
-	rcu_read_lock();
-	if (ns_capable(__task_cred(task)->user_ns, CAP_SYS_PTRACE))
-		flags |= PT_PTRACE_CAP;
-	rcu_read_unlock();
 	task->ptrace = flags;
 
 	__ptrace_link(task, current);
--- a/mm/init-mm.c
+++ b/mm/init-mm.c
@@ -6,6 +6,7 @@
 #include <linux/cpumask.h>
 
 #include <linux/atomic.h>
+#include <linux/user_namespace.h>
 #include <asm/pgtable.h>
 #include <asm/mmu.h>
 
@@ -21,5 +22,6 @@ struct mm_struct init_mm = {
 	.mmap_sem	= __RWSEM_INITIALIZER(init_mm.mmap_sem),
 	.page_table_lock =  __SPIN_LOCK_UNLOCKED(init_mm.page_table_lock),
 	.mmlist		= LIST_HEAD_INIT(init_mm.mmlist),
+	.user_ns	= &init_user_ns,
 	INIT_MM_CONTEXT(init_mm)
 };

[PATCH 4.4 30/60] ptrace: Capture the ptracers creds not PT_PTRACE_CAP

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric W. Biederman <ebiederm@xmission.com>

commit 64b875f7ac8a5d60a4e191479299e931ee949b67 upstream.

When the flag PT_PTRACE_CAP was added the PTRACE_TRACEME path was
overlooked.  This can result in incorrect behavior when an application
like strace traces an exec of a setuid executable.

Further PT_PTRACE_CAP does not have enough information for making good
security decisions as it does not report which user namespace the
capability is in.  This has already allowed one mistake through
insufficient granulariy.

I found this issue when I was testing another corner case of exec and
discovered that I could not get strace to set PT_PTRACE_CAP even when
running strace as root with a full set of caps.

This change fixes the above issue with strace allowing stracing as
root a setuid executable without disabling setuid.  More fundamentaly
this change allows what is allowable at all times, by using the correct
information in it's decision.

Fixes: 4214e42f96d4 ("v2.4.9.11 -> v2.4.9.12")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/exec.c                  |    2 +-
 include/linux/capability.h |    1 +
 include/linux/ptrace.h     |    1 -
 include/linux/sched.h      |    1 +
 kernel/capability.c        |   20 ++++++++++++++++++++
 kernel/ptrace.c            |   12 +++++++-----
 6 files changed, 30 insertions(+), 7 deletions(-)

--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1254,7 +1254,7 @@ static void check_unsafe_exec(struct lin
 	unsigned n_fs;
 
 	if (p->ptrace) {
-		if (p->ptrace & PT_PTRACE_CAP)
+		if (ptracer_capable(p, current_user_ns()))
 			bprm->unsafe |= LSM_UNSAFE_PTRACE_CAP;
 		else
 			bprm->unsafe |= LSM_UNSAFE_PTRACE;
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -249,6 +249,7 @@ static inline bool ns_capable_noaudit(st
 #endif /* CONFIG_MULTIUSER */
 extern bool capable_wrt_inode_uidgid(const struct inode *inode, int cap);
 extern bool file_ns_capable(const struct file *file, struct user_namespace *ns, int cap);
+extern bool ptracer_capable(struct task_struct *tsk, struct user_namespace *ns);
 
 /* audit system wants to get cap info from files as well */
 extern int get_vfs_caps_from_disk(const struct dentry *dentry, struct cpu_vfs_cap_data *cpu_caps);
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -19,7 +19,6 @@
 #define PT_SEIZED	0x00010000	/* SEIZE used, enable new behavior */
 #define PT_PTRACED	0x00000001
 #define PT_DTRACE	0x00000002	/* delayed trace (used on m68k, i386) */
-#define PT_PTRACE_CAP	0x00000004	/* ptracer can follow suid-exec */
 
 #define PT_OPT_FLAG_SHIFT	3
 /* PT_TRACE_* event enable flags */
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1540,6 +1540,7 @@ struct task_struct {
 	struct list_head cpu_timers[3];
 
 /* process credentials */
+	const struct cred __rcu *ptracer_cred; /* Tracer's credentials at attach */
 	const struct cred __rcu *real_cred; /* objective and real subjective task
 					 * credentials (COW) */
 	const struct cred __rcu *cred;	/* effective (overridable) subjective task
--- a/kernel/capability.c
+++ b/kernel/capability.c
@@ -473,3 +473,23 @@ bool capable_wrt_inode_uidgid(const stru
 		kgid_has_mapping(ns, inode->i_gid);
 }
 EXPORT_SYMBOL(capable_wrt_inode_uidgid);
+
+/**
+ * ptracer_capable - Determine if the ptracer holds CAP_SYS_PTRACE in the namespace
+ * @tsk: The task that may be ptraced
+ * @ns: The user namespace to search for CAP_SYS_PTRACE in
+ *
+ * Return true if the task that is ptracing the current task had CAP_SYS_PTRACE
+ * in the specified user namespace.
+ */
+bool ptracer_capable(struct task_struct *tsk, struct user_namespace *ns)
+{
+	int ret = 0;  /* An absent tracer adds no restrictions */
+	const struct cred *cred;
+	rcu_read_lock();
+	cred = rcu_dereference(tsk->ptracer_cred);
+	if (cred)
+		ret = security_capable_noaudit(cred, ns, CAP_SYS_PTRACE);
+	rcu_read_unlock();
+	return (ret == 0);
+}
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -39,6 +39,9 @@ void __ptrace_link(struct task_struct *c
 	BUG_ON(!list_empty(&child->ptrace_entry));
 	list_add(&child->ptrace_entry, &new_parent->ptraced);
 	child->parent = new_parent;
+	rcu_read_lock();
+	child->ptracer_cred = get_cred(__task_cred(new_parent));
+	rcu_read_unlock();
 }
 
 /**
@@ -71,11 +74,15 @@ void __ptrace_link(struct task_struct *c
  */
 void __ptrace_unlink(struct task_struct *child)
 {
+	const struct cred *old_cred;
 	BUG_ON(!child->ptrace);
 
 	child->ptrace = 0;
 	child->parent = child->real_parent;
 	list_del_init(&child->ptrace_entry);
+	old_cred = child->ptracer_cred;
+	child->ptracer_cred = NULL;
+	put_cred(old_cred);
 
 	spin_lock(&child->sighand->siglock);
 
@@ -325,11 +332,6 @@ static int ptrace_attach(struct task_str
 
 	task_lock(task);
 	retval = __ptrace_may_access(task, PTRACE_MODE_ATTACH_REALCREDS);
-	if (!retval) {
-		struct mm_struct *mm = task->mm;
-		if (mm && ns_capable(mm->user_ns, CAP_SYS_PTRACE))
-			flags |= PT_PTRACE_CAP;
-	}
 	task_unlock(task);
 	if (retval)
 		goto unlock_creds;

[PATCH 4.4 32/60] ext4: fix mballoc breakage with 64k block size

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chandan Rajendra <chandan@linux.vnet.ibm.com>

commit 69e43e8cc971a79dd1ee5d4343d8e63f82725123 upstream.

'border' variable is set to a value of 2 times the block size of the
underlying filesystem. With 64k block size, the resulting value won't
fit into a 16-bit variable. Hence this commit changes the data type of
'border' to 'unsigned int'.

Fixes: c9de560ded61f
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/mballoc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -669,7 +669,7 @@ static void ext4_mb_mark_free_simple(str
 	ext4_grpblk_t min;
 	ext4_grpblk_t max;
 	ext4_grpblk_t chunk;
-	unsigned short border;
+	unsigned int border;
 
 	BUG_ON(len > EXT4_CLUSTERS_PER_GROUP(sb));
 

[PATCH 4.4 33/60] ext4: fix stack memory corruption with 64k block size

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chandan Rajendra <chandan@linux.vnet.ibm.com>

commit 30a9d7afe70ed6bd9191d3000e2ef1a34fb58493 upstream.

The number of 'counters' elements needed in 'struct sg' is
super_block->s_blocksize_bits + 2. Presently we have 16 'counters'
elements in the array. This is insufficient for block sizes >= 32k. In
such cases the memcpy operation performed in ext4_mb_seq_groups_show()
would cause stack memory corruption.

Fixes: c9de560ded61f
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/mballoc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -2287,7 +2287,7 @@ static int ext4_mb_seq_groups_show(struc
 	struct ext4_group_info *grinfo;
 	struct sg {
 		struct ext4_group_info info;
-		ext4_grpblk_t counters[16];
+		ext4_grpblk_t counters[EXT4_MAX_BLOCK_LOG_SIZE + 2];
 	} sg;
 
 	group--;

[PATCH 4.4 34/60] ext4: use more strict checks for inodes_per_block on mount

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit cd6bb35bf7f6d7d922509bf50265383a0ceabe96 upstream.

Centralize the checks for inodes_per_block and be more strict to make
sure the inodes_per_block_group can't end up being zero.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/super.c |   15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3496,12 +3496,16 @@ static int ext4_fill_super(struct super_
 
 	sbi->s_blocks_per_group = le32_to_cpu(es->s_blocks_per_group);
 	sbi->s_inodes_per_group = le32_to_cpu(es->s_inodes_per_group);
-	if (EXT4_INODE_SIZE(sb) == 0 || EXT4_INODES_PER_GROUP(sb) == 0)
-		goto cantfind_ext4;
 
 	sbi->s_inodes_per_block = blocksize / EXT4_INODE_SIZE(sb);
 	if (sbi->s_inodes_per_block == 0)
 		goto cantfind_ext4;
+	if (sbi->s_inodes_per_group < sbi->s_inodes_per_block ||
+	    sbi->s_inodes_per_group > blocksize * 8) {
+		ext4_msg(sb, KERN_ERR, "invalid inodes per group: %lu\n",
+			 sbi->s_blocks_per_group);
+		goto failed_mount;
+	}
 	sbi->s_itb_per_group = sbi->s_inodes_per_group /
 					sbi->s_inodes_per_block;
 	sbi->s_desc_per_block = blocksize / EXT4_DESC_SIZE(sb);
@@ -3584,13 +3588,6 @@ static int ext4_fill_super(struct super_
 	}
 	sbi->s_cluster_ratio = clustersize / blocksize;
 
-	if (sbi->s_inodes_per_group > blocksize * 8) {
-		ext4_msg(sb, KERN_ERR,
-		       "#inodes per group too big: %lu",
-		       sbi->s_inodes_per_group);
-		goto failed_mount;
-	}
-
 	/* Do we have standard group size of clustersize * 8 blocks ? */
 	if (sbi->s_blocks_per_group == clustersize << 3)
 		set_opt2(sb, STD_GROUP_SIZE);

[PATCH 4.4 35/60] ext4: fix in-superblock mount options processing

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit 5aee0f8a3f42c94c5012f1673420aee96315925a upstream.

Fix a large number of problems with how we handle mount options in the
superblock.  For one, if the string in the superblock is long enough
that it is not null terminated, we could run off the end of the string
and try to interpret superblocks fields as characters.  It's unlikely
this will cause a security problem, but it could result in an invalid
parse.  Also, parse_options is destructive to the string, so in some
cases if there is a comma-separated string, it would be modified in
the superblock.  (Fortunately it only happens on file systems with a
1k block size.)

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/super.c |   38 +++++++++++++++++++++++---------------
 1 file changed, 23 insertions(+), 15 deletions(-)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3130,7 +3130,7 @@ static int ext4_fill_super(struct super_
 	char *orig_data = kstrdup(data, GFP_KERNEL);
 	struct buffer_head *bh;
 	struct ext4_super_block *es = NULL;
-	struct ext4_sb_info *sbi;
+	struct ext4_sb_info *sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
 	ext4_fsblk_t block;
 	ext4_fsblk_t sb_block = get_sb_block(&data);
 	ext4_fsblk_t logical_sb_block;
@@ -3149,16 +3149,14 @@ static int ext4_fill_super(struct super_
 	unsigned int journal_ioprio = DEFAULT_JOURNAL_IOPRIO;
 	ext4_group_t first_not_zeroed;
 
-	sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
-	if (!sbi)
-		goto out_free_orig;
+	if ((data && !orig_data) || !sbi)
+		goto out_free_base;
 
 	sbi->s_blockgroup_lock =
 		kzalloc(sizeof(struct blockgroup_lock), GFP_KERNEL);
-	if (!sbi->s_blockgroup_lock) {
-		kfree(sbi);
-		goto out_free_orig;
-	}
+	if (!sbi->s_blockgroup_lock)
+		goto out_free_base;
+
 	sb->s_fs_info = sbi;
 	sbi->s_sb = sb;
 	sbi->s_inode_readahead_blks = EXT4_DEF_INODE_READAHEAD_BLKS;
@@ -3304,11 +3302,19 @@ static int ext4_fill_super(struct super_
 	 */
 	sbi->s_li_wait_mult = EXT4_DEF_LI_WAIT_MULT;
 
-	if (!parse_options((char *) sbi->s_es->s_mount_opts, sb,
-			   &journal_devnum, &journal_ioprio, 0)) {
-		ext4_msg(sb, KERN_WARNING,
-			 "failed to parse options in superblock: %s",
-			 sbi->s_es->s_mount_opts);
+	if (sbi->s_es->s_mount_opts[0]) {
+		char *s_mount_opts = kstrndup(sbi->s_es->s_mount_opts,
+					      sizeof(sbi->s_es->s_mount_opts),
+					      GFP_KERNEL);
+		if (!s_mount_opts)
+			goto failed_mount;
+		if (!parse_options(s_mount_opts, sb, &journal_devnum,
+				   &journal_ioprio, 0)) {
+			ext4_msg(sb, KERN_WARNING,
+				 "failed to parse options in superblock: %s",
+				 s_mount_opts);
+		}
+		kfree(s_mount_opts);
 	}
 	sbi->s_def_mount_opt = sbi->s_mount_opt;
 	if (!parse_options((char *) data, sb, &journal_devnum,
@@ -3991,7 +3997,9 @@ no_journal:
 
 	if (___ratelimit(&ext4_mount_msg_ratelimit, "EXT4-fs mount"))
 		ext4_msg(sb, KERN_INFO, "mounted filesystem with%s. "
-			 "Opts: %s%s%s", descr, sbi->s_es->s_mount_opts,
+			 "Opts: %.*s%s%s", descr,
+			 (int) sizeof(sbi->s_es->s_mount_opts),
+			 sbi->s_es->s_mount_opts,
 			 *sbi->s_es->s_mount_opts ? "; " : "", orig_data);
 
 	if (es->s_error_count)
@@ -4061,8 +4069,8 @@ failed_mount:
 out_fail:
 	sb->s_fs_info = NULL;
 	kfree(sbi->s_blockgroup_lock);
+out_free_base:
 	kfree(sbi);
-out_free_orig:
 	kfree(orig_data);
 	return err ? err : ret;
 }

[PATCH 4.4 36/60] ext4: add sanity checking to count_overhead()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit c48ae41bafe31e9a66d8be2ced4e42a6b57fa814 upstream.

The commit "ext4: sanity check the block and cluster size at mount
time" should prevent any problems, but in case the superblock is
modified while the file system is mounted, add an extra safety check
to make sure we won't overrun the allocated buffer.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/super.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3037,10 +3037,15 @@ static int count_overhead(struct super_b
 			ext4_set_bit(s++, buf);
 			count++;
 		}
-		for (j = ext4_bg_num_gdb(sb, grp); j > 0; j--) {
-			ext4_set_bit(EXT4_B2C(sbi, s++), buf);
-			count++;
+		j = ext4_bg_num_gdb(sb, grp);
+		if (s + j > EXT4_BLOCKS_PER_GROUP(sb)) {
+			ext4_error(sb, "Invalid number of block group "
+				   "descriptor blocks: %d", j);
+			j = EXT4_BLOCKS_PER_GROUP(sb) - s;
 		}
+		count += j;
+		for (; j > 0; j--)
+			ext4_set_bit(EXT4_B2C(sbi, s++), buf);
 	}
 	if (!count)
 		return 0;

[PATCH 4.4 37/60] ext4: reject inodes with negative size

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Darrick J. Wong <darrick.wong@oracle.com>

commit 7e6e1ef48fc02f3ac5d0edecbb0c6087cd758d58 upstream.

Don't load an inode with a negative size; this causes integer overflow
problems in the VFS.

[ Added EXT4_ERROR_INODE() to mark file system as corrupted. -TYT]

Fixes: a48380f769df (ext4: rename i_dir_acl to i_size_high)
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/inode.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4175,6 +4175,7 @@ struct inode *ext4_iget(struct super_blo
 	struct inode *inode;
 	journal_t *journal = EXT4_SB(sb)->s_journal;
 	long ret;
+	loff_t size;
 	int block;
 	uid_t i_uid;
 	gid_t i_gid;
@@ -4266,6 +4267,11 @@ struct inode *ext4_iget(struct super_blo
 		ei->i_file_acl |=
 			((__u64)le16_to_cpu(raw_inode->i_file_acl_high)) << 32;
 	inode->i_size = ext4_isize(raw_inode);
+	if ((size = i_size_read(inode)) < 0) {
+		EXT4_ERROR_INODE(inode, "bad i_size value: %lld", size);
+		ret = -EFSCORRUPTED;
+		goto bad_inode;
+	}
 	ei->i_disksize = inode->i_size;
 #ifdef CONFIG_QUOTA
 	ei->i_reserved_quota = 0;

[PATCH 4.4 38/60] ext4: return -ENOMEM instead of success

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 578620f451f836389424833f1454eeeb2ffc9e9f upstream.

We should set the error code if kzalloc() fails.

Fixes: 67cf5b09a46f ("ext4: add the basic function for inline data support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/inline.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -336,8 +336,10 @@ static int ext4_update_inline_data(handl
 
 	len -= EXT4_MIN_INLINE_DATA_SIZE;
 	value = kzalloc(len, GFP_NOFS);
-	if (!value)
+	if (!value) {
+		error = -ENOMEM;
 		goto out;
+	}
 
 	error = ext4_xattr_ibody_get(inode, i.name_index, i.name,
 				     value, len);

[PATCH 4.4 39/60] ext4: do not perform data journaling when data is encrypted

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sergey Karamov <skaramov@google.com>

commit 73b92a2a5e97d17cc4d5c4fe9d724d3273fb6fd2 upstream.

Currently data journalling is incompatible with encryption: enabling both
at the same time has never been supported by design, and would result in
unpredictable behavior. However, users are not precluded from turning on
both features simultaneously. This change programmatically replaces data
journaling for encrypted regular files with ordered data journaling mode.

Background:
Journaling encrypted data has not been supported because it operates on
buffer heads of the page in the page cache. Namely, when the commit
happens, which could be up to five seconds after caching, the commit
thread uses the buffer heads attached to the page to copy the contents of
the page to the journal. With encryption, it would have been required to
keep the bounce buffer with ciphertext for up to the aforementioned five
seconds, since the page cache can only hold plaintext and could not be
used for journaling. Alternatively, it would be required to setup the
journal to initiate a callback at the commit time to perform deferred
encryption - in this case, not only would the data have to be written
twice, but it would also have to be encrypted twice. This level of
complexity was not justified for a mode that in practice is very rarely
used because of the overhead from the data journalling.

Solution:
If data=journaled has been set as a mount option for a filesystem, or if
journaling is enabled on a regular file, do not perform journaling if the
file is also encrypted, instead fall back to the data=ordered mode for the
file.

Rationale:
The intent is to allow seamless and proper filesystem operation when
journaling and encryption have both been enabled, and have these two
conflicting features gracefully resolved by the filesystem.

Fixes: 4461471107b7
Signed-off-by: Sergey Karamov <skaramov@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/ext4_jbd2.h |   14 ++++++++------
 fs/ext4/super.c     |    5 +++++
 2 files changed, 13 insertions(+), 6 deletions(-)

--- a/fs/ext4/ext4_jbd2.h
+++ b/fs/ext4/ext4_jbd2.h
@@ -395,17 +395,19 @@ static inline int ext4_inode_journal_mod
 		return EXT4_INODE_WRITEBACK_DATA_MODE;	/* writeback */
 	/* We do not support data journalling with delayed allocation */
 	if (!S_ISREG(inode->i_mode) ||
-	    test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA)
-		return EXT4_INODE_JOURNAL_DATA_MODE;	/* journal data */
-	if (ext4_test_inode_flag(inode, EXT4_INODE_JOURNAL_DATA) &&
-	    !test_opt(inode->i_sb, DELALLOC))
+	    test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA ||
+	    (ext4_test_inode_flag(inode, EXT4_INODE_JOURNAL_DATA) &&
+	    !test_opt(inode->i_sb, DELALLOC))) {
+		/* We do not support data journalling for encrypted data */
+		if (S_ISREG(inode->i_mode) && ext4_encrypted_inode(inode))
+			return EXT4_INODE_ORDERED_DATA_MODE;  /* ordered */
 		return EXT4_INODE_JOURNAL_DATA_MODE;	/* journal data */
+	}
 	if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA)
 		return EXT4_INODE_ORDERED_DATA_MODE;	/* ordered */
 	if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_WRITEBACK_DATA)
 		return EXT4_INODE_WRITEBACK_DATA_MODE;	/* writeback */
-	else
-		BUG();
+	BUG();
 }
 
 static inline int ext4_should_journal_data(struct inode *inode)
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3345,6 +3345,11 @@ static int ext4_fill_super(struct super_
 				 "both data=journal and dax");
 			goto failed_mount;
 		}
+		if (ext4_has_feature_encrypt(sb)) {
+			ext4_msg(sb, KERN_WARNING,
+				 "encrypted files will use data=ordered "
+				 "instead of data journaling mode");
+		}
 		if (test_opt(sb, DELALLOC))
 			clear_opt(sb, DELALLOC);
 	} else {

[PATCH 4.4 40/60] f2fs: set ->owner for debugfs status files file_operations

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicolai Stange <nicstange@gmail.com>

commit 05e6ea2685c964db1e675a24a4f4e2adc22d2388 upstream.

The struct file_operations instance serving the f2fs/status debugfs file
lacks an initialization of its ->owner.

This means that although that file might have been opened, the f2fs module
can still get removed. Any further operation on that opened file, releasing
included,  will cause accesses to unmapped memory.

Indeed, Mike Marshall reported the following:

  BUG: unable to handle kernel paging request at ffffffffa0307430
  IP: [<ffffffff8132a224>] full_proxy_release+0x24/0x90
  <...>
  Call Trace:
   [] __fput+0xdf/0x1d0
   [] ____fput+0xe/0x10
   [] task_work_run+0x8e/0xc0
   [] do_exit+0x2ae/0xae0
   [] ? __audit_syscall_entry+0xae/0x100
   [] ? syscall_trace_enter+0x1ca/0x310
   [] do_group_exit+0x44/0xc0
   [] SyS_exit_group+0x14/0x20
   [] do_syscall_64+0x61/0x150
   [] entry_SYSCALL64_slow_path+0x25/0x25
  <...>
  ---[ end trace f22ae883fa3ea6b8 ]---
  Fixing recursive fault but reboot is needed!

Fix this by initializing the f2fs/status file_operations' ->owner with
THIS_MODULE.

This will allow debugfs to grab a reference to the f2fs module upon any
open on that file, thus preventing it from getting removed.

Fixes: 902829aa0b72 ("f2fs: move proc files to debugfs")
Reported-by: Mike Marshall <hubcap@omnibond.com>
Reported-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/f2fs/debug.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/f2fs/debug.c
+++ b/fs/f2fs/debug.c
@@ -352,6 +352,7 @@ static int stat_open(struct inode *inode
 }
 
 static const struct file_operations stat_fops = {
+	.owner = THIS_MODULE,
 	.open = stat_open,
 	.read = seq_read,
 	.llseek = seq_lseek,

[PATCH 4.4 41/60] loop: return proper error from loop_queue_rq()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Omar Sandoval <osandov@fb.com>

commit b4a567e8114327518c09f5632339a5954ab975a3 upstream.

->queue_rq() should return one of the BLK_MQ_RQ_QUEUE_* constants, not
an errno.

Fixes: f4aa4c7bbac6 ("block: loop: convert to per-device workqueue")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/loop.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -1657,7 +1657,7 @@ static int loop_queue_rq(struct blk_mq_h
 	blk_mq_start_request(bd->rq);
 
 	if (lo->lo_state != Lo_bound)
-		return -EIO;
+		return BLK_MQ_RQ_QUEUE_ERROR;
 
 	if (lo->use_dio && !(cmd->rq->cmd_flags & (REQ_FLUSH |
 					REQ_DISCARD)))

[PATCH 4.4 42/60] mm/vmscan.c: set correct defer count for shrinker

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shaohua Li <shli@fb.com>

commit 5f33a0803bbd781de916f5c7448cbbbbc763d911 upstream.

Our system uses significantly more slab memory with memcg enabled with
the latest kernel.  With 3.10 kernel, slab uses 2G memory, while with
4.6 kernel, 6G memory is used.  The shrinker has problem.  Let's see we
have two memcg for one shrinker.  In do_shrink_slab:

1. Check cg1.  nr_deferred = 0, assume total_scan = 700.  batch size
   is 1024, then no memory is freed.  nr_deferred = 700

2. Check cg2.  nr_deferred = 700.  Assume freeable = 20, then
   total_scan = 10 or 40.  Let's assume it's 10.  No memory is freed.
   nr_deferred = 10.

The deferred share of cg1 is lost in this case.  kswapd will free no
memory even run above steps again and again.

The fix makes sure one memcg's deferred share isn't lost.

Link: http://lkml.kernel.org/r/2414be961b5d25892060315fbb56bb19d81d0c07.1476227351.git.shli@fb.com
Signed-off-by: Shaohua Li <shli@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/vmscan.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -277,6 +277,7 @@ static unsigned long do_shrink_slab(stru
 	int nid = shrinkctl->nid;
 	long batch_size = shrinker->batch ? shrinker->batch
 					  : SHRINK_BATCH;
+	long scanned = 0, next_deferred;
 
 	freeable = shrinker->count_objects(shrinker, shrinkctl);
 	if (freeable == 0)
@@ -298,7 +299,9 @@ static unsigned long do_shrink_slab(stru
 		pr_err("shrink_slab: %pF negative objects to delete nr=%ld\n",
 		       shrinker->scan_objects, total_scan);
 		total_scan = freeable;
-	}
+		next_deferred = nr;
+	} else
+		next_deferred = total_scan;
 
 	/*
 	 * We need to avoid excessive windup on filesystem shrinkers
@@ -355,17 +358,22 @@ static unsigned long do_shrink_slab(stru
 
 		count_vm_events(SLABS_SCANNED, nr_to_scan);
 		total_scan -= nr_to_scan;
+		scanned += nr_to_scan;
 
 		cond_resched();
 	}
 
+	if (next_deferred >= scanned)
+		next_deferred -= scanned;
+	else
+		next_deferred = 0;
 	/*
 	 * move the unused scan count back into the shrinker in a
 	 * manner that handles concurrent updates. If we exhausted the
 	 * scan, there is no need to do an update.
 	 */
-	if (total_scan > 0)
-		new_nr = atomic_long_add_return(total_scan,
+	if (next_deferred > 0)
+		new_nr = atomic_long_add_return(next_deferred,
 						&shrinker->nr_deferred[nid]);
 	else
 		new_nr = atomic_long_read(&shrinker->nr_deferred[nid]);

[PATCH 4.4 43/60] fs: exec: apply CLOEXEC before changing dumpable task flags

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aleksa Sarai <asarai@suse.de>

commit 613cc2b6f272c1a8ad33aefa21cad77af23139f7 upstream.

If you have a process that has set itself to be non-dumpable, and it
then undergoes exec(2), any CLOEXEC file descriptors it has open are
"exposed" during a race window between the dumpable flags of the process
being reset for exec(2) and CLOEXEC being applied to the file
descriptors. This can be exploited by a process by attempting to access
/proc/<pid>/fd/... during this window, without requiring CAP_SYS_PTRACE.

The race in question is after set_dumpable has been (for get_link,
though the trace is basically the same for readlink):

[vfs]
-> proc_pid_link_inode_operations.get_link
   -> proc_pid_get_link
      -> proc_fd_access_allowed
         -> ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS);

Which will return 0, during the race window and CLOEXEC file descriptors
will still be open during this window because do_close_on_exec has not
been called yet. As a result, the ordering of these calls should be
reversed to avoid this race window.

This is of particular concern to container runtimes, where joining a
PID namespace with file descriptors referring to the host filesystem
can result in security issues (since PRCTL_SET_DUMPABLE doesn't protect
against access of CLOEXEC file descriptors -- file descriptors which may
reference filesystem objects the container shouldn't have access to).

Cc: dev@opencontainers.org
Cc: <stable@vger.kernel.org> # v3.2+
Reported-by: Michael Crosby <crosbymichael@gmail.com>
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/exec.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/fs/exec.c
+++ b/fs/exec.c
@@ -19,7 +19,7 @@
  * current->executable is only used by the procfs.  This allows a dispatch
  * table to check for several different types  of binary formats.  We keep
  * trying until we recognize the file or we run out of supported binary
- * formats. 
+ * formats.
  */
 
 #include <linux/slab.h>
@@ -1114,6 +1114,13 @@ int flush_old_exec(struct linux_binprm *
 	flush_thread();
 	current->personality &= ~bprm->per_clear;
 
+	/*
+	 * We have to apply CLOEXEC before we change whether the process is
+	 * dumpable (in setup_new_exec) to avoid a race with a process in userspace
+	 * trying to access the should-be-closed file descriptors of a process
+	 * undergoing exec(2).
+	 */
+	do_close_on_exec(current->files);
 	return 0;
 
 out:
@@ -1163,7 +1170,6 @@ void setup_new_exec(struct linux_binprm
 	   group */
 	current->self_exec_id++;
 	flush_signal_handlers(current, 0);
-	do_close_on_exec(current->files);
 }
 EXPORT_SYMBOL(setup_new_exec);
 

[PATCH 4.4 44/60] exec: Ensure mm->user_ns contains the execed files

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric W. Biederman <ebiederm@xmission.com>

commit f84df2a6f268de584a201e8911384a2d244876e3 upstream.

When the user namespace support was merged the need to prevent
ptrace from revealing the contents of an unreadable executable
was overlooked.

Correct this oversight by ensuring that the executed file
or files are in mm->user_ns, by adjusting mm->user_ns.

Use the new function privileged_wrt_inode_uidgid to see if
the executable is a member of the user namespace, and as such
if having CAP_SYS_PTRACE in the user namespace should allow
tracing the executable.  If not update mm->user_ns to
the parent user namespace until an appropriate parent is found.

Reported-by: Jann Horn <jann@thejh.net>
Fixes: 9e4a36ece652 ("userns: Fail exec for suid and sgid binaries with ids outside our user namespace.")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/exec.c                  |   20 ++++++++++++++++++--
 include/linux/capability.h |    1 +
 kernel/capability.c        |   16 ++++++++++++++--
 3 files changed, 33 insertions(+), 4 deletions(-)

--- a/fs/exec.c
+++ b/fs/exec.c
@@ -56,6 +56,7 @@
 #include <linux/pipe_fs_i.h>
 #include <linux/oom.h>
 #include <linux/compat.h>
+#include <linux/user_namespace.h>
 
 #include <asm/uaccess.h>
 #include <asm/mmu_context.h>
@@ -1130,8 +1131,22 @@ EXPORT_SYMBOL(flush_old_exec);
 
 void would_dump(struct linux_binprm *bprm, struct file *file)
 {
-	if (inode_permission(file_inode(file), MAY_READ) < 0)
+	struct inode *inode = file_inode(file);
+	if (inode_permission(inode, MAY_READ) < 0) {
+		struct user_namespace *old, *user_ns;
 		bprm->interp_flags |= BINPRM_FLAGS_ENFORCE_NONDUMP;
+
+		/* Ensure mm->user_ns contains the executable */
+		user_ns = old = bprm->mm->user_ns;
+		while ((user_ns != &init_user_ns) &&
+		       !privileged_wrt_inode_uidgid(user_ns, inode))
+			user_ns = user_ns->parent;
+
+		if (old != user_ns) {
+			bprm->mm->user_ns = get_user_ns(user_ns);
+			put_user_ns(old);
+		}
+	}
 }
 EXPORT_SYMBOL(would_dump);
 
@@ -1161,7 +1176,6 @@ void setup_new_exec(struct linux_binprm
 	    !gid_eq(bprm->cred->gid, current_egid())) {
 		current->pdeath_signal = 0;
 	} else {
-		would_dump(bprm, bprm->file);
 		if (bprm->interp_flags & BINPRM_FLAGS_ENFORCE_NONDUMP)
 			set_dumpable(current->mm, suid_dumpable);
 	}
@@ -1593,6 +1607,8 @@ static int do_execveat_common(int fd, st
 	if (retval < 0)
 		goto out;
 
+	would_dump(bprm, bprm->file);
+
 	retval = exec_binprm(bprm);
 	if (retval < 0)
 		goto out;
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -247,6 +247,7 @@ static inline bool ns_capable_noaudit(st
 	return true;
 }
 #endif /* CONFIG_MULTIUSER */
+extern bool privileged_wrt_inode_uidgid(struct user_namespace *ns, const struct inode *inode);
 extern bool capable_wrt_inode_uidgid(const struct inode *inode, int cap);
 extern bool file_ns_capable(const struct file *file, struct user_namespace *ns, int cap);
 extern bool ptracer_capable(struct task_struct *tsk, struct user_namespace *ns);
--- a/kernel/capability.c
+++ b/kernel/capability.c
@@ -457,6 +457,19 @@ bool file_ns_capable(const struct file *
 EXPORT_SYMBOL(file_ns_capable);
 
 /**
+ * privileged_wrt_inode_uidgid - Do capabilities in the namespace work over the inode?
+ * @ns: The user namespace in question
+ * @inode: The inode in question
+ *
+ * Return true if the inode uid and gid are within the namespace.
+ */
+bool privileged_wrt_inode_uidgid(struct user_namespace *ns, const struct inode *inode)
+{
+	return kuid_has_mapping(ns, inode->i_uid) &&
+		kgid_has_mapping(ns, inode->i_gid);
+}
+
+/**
  * capable_wrt_inode_uidgid - Check nsown_capable and uid and gid mapped
  * @inode: The inode in question
  * @cap: The capability in question
@@ -469,8 +482,7 @@ bool capable_wrt_inode_uidgid(const stru
 {
 	struct user_namespace *ns = current_user_ns();
 
-	return ns_capable(ns, cap) && kuid_has_mapping(ns, inode->i_uid) &&
-		kgid_has_mapping(ns, inode->i_gid);
+	return ns_capable(ns, cap) && privileged_wrt_inode_uidgid(ns, inode);
 }
 EXPORT_SYMBOL(capable_wrt_inode_uidgid);
 

[PATCH 4.4 45/60] usb: gadget: composite: always set ep->mult to a sensible value

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felipe Balbi <felipe.balbi@linux.intel.com>

commit eaa496ffaaf19591fe471a36cef366146eeb9153 upstream.

ep->mult is supposed to be set to Isochronous and
Interrupt Endapoint's multiplier value. This value
is computed from different places depending on the
link speed.

If we're dealing with HighSpeed, then it's part of
bits [12:11] of wMaxPacketSize. This case wasn't
taken into consideration before.

While at that, also make sure the ep->mult defaults
to one so drivers can use it unconditionally and
assume they'll never multiply ep->maxpacket to zero.

Cc: <stable@vger.kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/composite.c          |    9 +++++++--
 drivers/usb/gadget/function/uvc_video.c |    2 +-
 2 files changed, 8 insertions(+), 3 deletions(-)

--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -148,7 +148,12 @@ ep_found:
 	_ep->desc = chosen_desc;
 	_ep->comp_desc = NULL;
 	_ep->maxburst = 0;
-	_ep->mult = 0;
+	_ep->mult = 1;
+
+	if (g->speed == USB_SPEED_HIGH && (usb_endpoint_xfer_isoc(_ep->desc) ||
+				usb_endpoint_xfer_int(_ep->desc)))
+		_ep->mult = usb_endpoint_maxp(_ep->desc) & 0x7ff;
+
 	if (!want_comp_desc)
 		return 0;
 
@@ -165,7 +170,7 @@ ep_found:
 		switch (usb_endpoint_type(_ep->desc)) {
 		case USB_ENDPOINT_XFER_ISOC:
 			/* mult: bits 1:0 of bmAttributes */
-			_ep->mult = comp_desc->bmAttributes & 0x3;
+			_ep->mult = (comp_desc->bmAttributes & 0x3) + 1;
 		case USB_ENDPOINT_XFER_BULK:
 		case USB_ENDPOINT_XFER_INT:
 			_ep->maxburst = comp_desc->bMaxBurst + 1;
--- a/drivers/usb/gadget/function/uvc_video.c
+++ b/drivers/usb/gadget/function/uvc_video.c
@@ -243,7 +243,7 @@ uvc_video_alloc_requests(struct uvc_vide
 
 	req_size = video->ep->maxpacket
 		 * max_t(unsigned int, video->ep->maxburst, 1)
-		 * (video->ep->mult + 1);
+		 * (video->ep->mult);
 
 	for (i = 0; i < UVC_NUM_REQUESTS; ++i) {
 		video->req_buffer[i] = kmalloc(req_size, GFP_KERNEL);

[PATCH 4.4 46/60] blk-mq: Do not invoke .queue_rq() for a stopped queue

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bart Van Assche <bart.vanassche@sandisk.com>

commit bc27c01b5c46d3bfec42c96537c7a3fae0bb2cc4 upstream.

The meaning of the BLK_MQ_S_STOPPED flag is "do not call
.queue_rq()". Hence modify blk_mq_make_request() such that requests
are queued instead of issued if a queue has been stopped.

Reported-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/blk-mq.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1313,9 +1313,9 @@ static blk_qc_t blk_mq_make_request(stru
 		blk_mq_put_ctx(data.ctx);
 		if (!old_rq)
 			goto done;
-		if (!blk_mq_direct_issue_request(old_rq, &cookie))
-			goto done;
-		blk_mq_insert_request(old_rq, false, true, true);
+		if (test_bit(BLK_MQ_S_STOPPED, &data.hctx->state) ||
+		    blk_mq_direct_issue_request(old_rq, &cookie) != 0)
+			blk_mq_insert_request(old_rq, false, true, true);
 		goto done;
 	}
 

[PATCH 4.4 47/60] dm flakey: return -EINVAL on interval bounds error in flakey_ctr()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wei Yongjun <weiyj.lk@gmail.com>

commit bff7e067ee518f9ed7e1cbc63e4c9e01670d0b71 upstream.

Fix to return error code -EINVAL instead of 0, as is done elsewhere in
this function.

Fixes: e80d1c805a3b ("dm: do not override error code returned from dm_get_device()")
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-flakey.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/md/dm-flakey.c
+++ b/drivers/md/dm-flakey.c
@@ -200,11 +200,13 @@ static int flakey_ctr(struct dm_target *
 
 	if (!(fc->up_interval + fc->down_interval)) {
 		ti->error = "Total (up + down) interval is zero";
+		r = -EINVAL;
 		goto bad;
 	}
 
 	if (fc->up_interval + fc->down_interval < fc->up_interval) {
 		ti->error = "Interval overflow";
+		r = -EINVAL;
 		goto bad;
 	}
 

[PATCH 4.4 48/60] dm crypt: mark key as invalid until properly loaded

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ondrej Kozina <okozina@redhat.com>

commit 265e9098bac02bc5e36cda21fdbad34cb5b2f48d upstream.

In crypt_set_key(), if a failure occurs while replacing the old key
(e.g. tfm->setkey() fails) the key must not have DM_CRYPT_KEY_VALID flag
set.  Otherwise, the crypto layer would have an invalid key that still
has DM_CRYPT_KEY_VALID flag set.

Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-crypt.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -1500,12 +1500,15 @@ static int crypt_set_key(struct crypt_co
 	if (!cc->key_size && strcmp(key, "-"))
 		goto out;
 
+	/* clear the flag since following operations may invalidate previously valid key */
+	clear_bit(DM_CRYPT_KEY_VALID, &cc->flags);
+
 	if (cc->key_size && crypt_decode_key(cc->key, key, cc->key_size) < 0)
 		goto out;
 
-	set_bit(DM_CRYPT_KEY_VALID, &cc->flags);
-
 	r = crypt_setkey_allcpus(cc);
+	if (!r)
+		set_bit(DM_CRYPT_KEY_VALID, &cc->flags);
 
 out:
 	/* Hex key string not needed after here, so wipe it. */

[PATCH 4.4 49/60] dm space map metadata: fix struct sm_metadata leak on failed create

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benjamin Marzinski <bmarzins@redhat.com>

commit 314c25c56c1ee5026cf99c570bdfe01847927acb upstream.

In dm_sm_metadata_create() we temporarily change the dm_space_map
operations from 'ops' (whose .destroy function deallocates the
sm_metadata) to 'bootstrap_ops' (whose .destroy function doesn't).

If dm_sm_metadata_create() fails in sm_ll_new_metadata() or
sm_ll_extend(), it exits back to dm_tm_create_internal(), which calls
dm_sm_destroy() with the intention of freeing the sm_metadata, but it
doesn't (because the dm_space_map operations is still set to
'bootstrap_ops').

Fix this by setting the dm_space_map operations back to 'ops' if
dm_sm_metadata_create() fails when it is set to 'bootstrap_ops'.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/persistent-data/dm-space-map-metadata.c |   14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

--- a/drivers/md/persistent-data/dm-space-map-metadata.c
+++ b/drivers/md/persistent-data/dm-space-map-metadata.c
@@ -775,17 +775,15 @@ int dm_sm_metadata_create(struct dm_spac
 	memcpy(&smm->sm, &bootstrap_ops, sizeof(smm->sm));
 
 	r = sm_ll_new_metadata(&smm->ll, tm);
+	if (!r) {
+		if (nr_blocks > DM_SM_METADATA_MAX_BLOCKS)
+			nr_blocks = DM_SM_METADATA_MAX_BLOCKS;
+		r = sm_ll_extend(&smm->ll, nr_blocks);
+	}
+	memcpy(&smm->sm, &ops, sizeof(smm->sm));
 	if (r)
 		return r;
 
-	if (nr_blocks > DM_SM_METADATA_MAX_BLOCKS)
-		nr_blocks = DM_SM_METADATA_MAX_BLOCKS;
-	r = sm_ll_extend(&smm->ll, nr_blocks);
-	if (r)
-		return r;
-
-	memcpy(&smm->sm, &ops, sizeof(smm->sm));
-
 	/*
 	 * Now we need to update the newly created data structures with the
 	 * allocated blocks that they were built from.

[PATCH 4.4 50/60] ASoC: intel: Fix crash at suspend/resume without card registration

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 2fc995a87f2efcd803438f07bfecd35cc3d90d32 upstream.

When ASoC Intel SST Medfield driver is probed but without codec / card
assigned, it causes an Oops and freezes the kernel at suspend/resume,

 PM: Suspending system (freeze)
 Suspending console(s) (use no_console_suspend to debug)
 BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
 IP: [<ffffffffc09d9409>] sst_soc_prepare+0x19/0xa0 [snd_soc_sst_mfld_platform]
 Oops: 0000 [#1] PREEMPT SMP
 CPU: 0 PID: 1552 Comm: systemd-sleep Tainted: G W 4.9.0-rc6-1.g5f5c2ad-default #1
 Call Trace:
  [<ffffffffb45318f9>] dpm_prepare+0x209/0x460
  [<ffffffffb4531b61>] dpm_suspend_start+0x11/0x60
  [<ffffffffb40d3cc2>] suspend_devices_and_enter+0xb2/0x710
  [<ffffffffb40d462e>] pm_suspend+0x30e/0x390
  [<ffffffffb40d2eba>] state_store+0x8a/0x90
  [<ffffffffb43c670f>] kobj_attr_store+0xf/0x20
  [<ffffffffb42b0d97>] sysfs_kf_write+0x37/0x40
  [<ffffffffb42b02bc>] kernfs_fop_write+0x11c/0x1b0
  [<ffffffffb422be68>] __vfs_write+0x28/0x140
  [<ffffffffb43728a8>] ? apparmor_file_permission+0x18/0x20
  [<ffffffffb433b2ab>] ? security_file_permission+0x3b/0xc0
  [<ffffffffb422d095>] vfs_write+0xb5/0x1a0
  [<ffffffffb422e3d6>] SyS_write+0x46/0xa0
  [<ffffffffb4719fbb>] entry_SYSCALL_64_fastpath+0x1e/0xad

Add proper NULL checks in the PM code of mdfld driver.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/intel/atom/sst-mfld-platform-pcm.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/sound/soc/intel/atom/sst-mfld-platform-pcm.c
+++ b/sound/soc/intel/atom/sst-mfld-platform-pcm.c
@@ -762,6 +762,9 @@ static int sst_soc_prepare(struct device
 	struct sst_data *drv = dev_get_drvdata(dev);
 	int i;
 
+	if (!drv->soc_card)
+		return 0;
+
 	/* suspend all pcms first */
 	snd_soc_suspend(drv->soc_card->dev);
 	snd_soc_poweroff(drv->soc_card->dev);
@@ -784,6 +787,9 @@ static void sst_soc_complete(struct devi
 	struct sst_data *drv = dev_get_drvdata(dev);
 	int i;
 
+	if (!drv->soc_card)
+		return;
+
 	/* restart SSPs */
 	for (i = 0; i < drv->soc_card->num_rtd; i++) {
 		struct snd_soc_dai *dai = drv->soc_card->rtd[i].cpu_dai;

[PATCH 4.4 51/60] CIFS: Fix a possible memory corruption during reconnect

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pavel Shilovsky <pshilov@microsoft.com>

commit 53e0e11efe9289535b060a51d4cf37c25e0d0f2b upstream.

We can not unlock/lock cifs_tcp_ses_lock while walking through ses
and tcon lists because it can corrupt list iterator pointers and
a tcon structure can be released if we don't hold an extra reference.
Fix it by moving a reconnect process to a separate delayed work
and acquiring a reference to every tcon that needs to be reconnected.
Also do not send an echo request on newly established connections.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/cifsglob.h  |    3 ++
 fs/cifs/cifsproto.h |    3 ++
 fs/cifs/connect.c   |   34 ++++++++++++++++++-----
 fs/cifs/smb2pdu.c   |   75 +++++++++++++++++++++++++++++++++++-----------------
 fs/cifs/smb2proto.h |    1 
 5 files changed, 85 insertions(+), 31 deletions(-)

--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -627,6 +627,8 @@ struct TCP_Server_Info {
 #ifdef CONFIG_CIFS_SMB2
 	unsigned int	max_read;
 	unsigned int	max_write;
+	struct delayed_work reconnect; /* reconnect workqueue job */
+	struct mutex reconnect_mutex; /* prevent simultaneous reconnects */
 #endif /* CONFIG_CIFS_SMB2 */
 };
 
@@ -826,6 +828,7 @@ cap_unix(struct cifs_ses *ses)
 struct cifs_tcon {
 	struct list_head tcon_list;
 	int tc_count;
+	struct list_head rlist; /* reconnect list */
 	struct list_head openFileList;
 	spinlock_t open_file_lock; /* protects list above */
 	struct cifs_ses *ses;	/* pointer to session associated with */
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -205,6 +205,9 @@ extern void cifs_add_pending_open_locked
 					 struct tcon_link *tlink,
 					 struct cifs_pending_open *open);
 extern void cifs_del_pending_open(struct cifs_pending_open *open);
+extern void cifs_put_tcp_session(struct TCP_Server_Info *server,
+				 int from_reconnect);
+extern void cifs_put_tcon(struct cifs_tcon *tcon);
 
 #if IS_ENABLED(CONFIG_CIFS_DFS_UPCALL)
 extern void cifs_dfs_release_automount_timer(void);
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -52,6 +52,9 @@
 #include "nterr.h"
 #include "rfc1002pdu.h"
 #include "fscache.h"
+#ifdef CONFIG_CIFS_SMB2
+#include "smb2proto.h"
+#endif
 
 #define CIFS_PORT 445
 #define RFC1001_PORT 139
@@ -2113,8 +2116,8 @@ cifs_find_tcp_session(struct smb_vol *vo
 	return NULL;
 }
 
-static void
-cifs_put_tcp_session(struct TCP_Server_Info *server)
+void
+cifs_put_tcp_session(struct TCP_Server_Info *server, int from_reconnect)
 {
 	struct task_struct *task;
 
@@ -2131,6 +2134,19 @@ cifs_put_tcp_session(struct TCP_Server_I
 
 	cancel_delayed_work_sync(&server->echo);
 
+#ifdef CONFIG_CIFS_SMB2
+	if (from_reconnect)
+		/*
+		 * Avoid deadlock here: reconnect work calls
+		 * cifs_put_tcp_session() at its end. Need to be sure
+		 * that reconnect work does nothing with server pointer after
+		 * that step.
+		 */
+		cancel_delayed_work(&server->reconnect);
+	else
+		cancel_delayed_work_sync(&server->reconnect);
+#endif
+
 	spin_lock(&GlobalMid_Lock);
 	server->tcpStatus = CifsExiting;
 	spin_unlock(&GlobalMid_Lock);
@@ -2195,6 +2211,10 @@ cifs_get_tcp_session(struct smb_vol *vol
 	INIT_LIST_HEAD(&tcp_ses->tcp_ses_list);
 	INIT_LIST_HEAD(&tcp_ses->smb_ses_list);
 	INIT_DELAYED_WORK(&tcp_ses->echo, cifs_echo_request);
+#ifdef CONFIG_CIFS_SMB2
+	INIT_DELAYED_WORK(&tcp_ses->reconnect, smb2_reconnect_server);
+	mutex_init(&tcp_ses->reconnect_mutex);
+#endif
 	memcpy(&tcp_ses->srcaddr, &volume_info->srcaddr,
 	       sizeof(tcp_ses->srcaddr));
 	memcpy(&tcp_ses->dstaddr, &volume_info->dstaddr,
@@ -2347,7 +2367,7 @@ cifs_put_smb_ses(struct cifs_ses *ses)
 	spin_unlock(&cifs_tcp_ses_lock);
 
 	sesInfoFree(ses);
-	cifs_put_tcp_session(server);
+	cifs_put_tcp_session(server, 0);
 }
 
 #ifdef CONFIG_KEYS
@@ -2521,7 +2541,7 @@ cifs_get_smb_ses(struct TCP_Server_Info
 		mutex_unlock(&ses->session_mutex);
 
 		/* existing SMB ses has a server reference already */
-		cifs_put_tcp_session(server);
+		cifs_put_tcp_session(server, 0);
 		free_xid(xid);
 		return ses;
 	}
@@ -2611,7 +2631,7 @@ cifs_find_tcon(struct cifs_ses *ses, con
 	return NULL;
 }
 
-static void
+void
 cifs_put_tcon(struct cifs_tcon *tcon)
 {
 	unsigned int xid;
@@ -3767,7 +3787,7 @@ mount_fail_check:
 		else if (ses)
 			cifs_put_smb_ses(ses);
 		else
-			cifs_put_tcp_session(server);
+			cifs_put_tcp_session(server, 0);
 		bdi_destroy(&cifs_sb->bdi);
 	}
 
@@ -4078,7 +4098,7 @@ cifs_construct_tcon(struct cifs_sb_info
 	ses = cifs_get_smb_ses(master_tcon->ses->server, vol_info);
 	if (IS_ERR(ses)) {
 		tcon = (struct cifs_tcon *)ses;
-		cifs_put_tcp_session(master_tcon->ses->server);
+		cifs_put_tcp_session(master_tcon->ses->server, 0);
 		goto out;
 	}
 
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -1822,6 +1822,54 @@ smb2_echo_callback(struct mid_q_entry *m
 	add_credits(server, credits_received, CIFS_ECHO_OP);
 }
 
+void smb2_reconnect_server(struct work_struct *work)
+{
+	struct TCP_Server_Info *server = container_of(work,
+					struct TCP_Server_Info, reconnect.work);
+	struct cifs_ses *ses;
+	struct cifs_tcon *tcon, *tcon2;
+	struct list_head tmp_list;
+	int tcon_exist = false;
+
+	/* Prevent simultaneous reconnects that can corrupt tcon->rlist list */
+	mutex_lock(&server->reconnect_mutex);
+
+	INIT_LIST_HEAD(&tmp_list);
+	cifs_dbg(FYI, "Need negotiate, reconnecting tcons\n");
+
+	spin_lock(&cifs_tcp_ses_lock);
+	list_for_each_entry(ses, &server->smb_ses_list, smb_ses_list) {
+		list_for_each_entry(tcon, &ses->tcon_list, tcon_list) {
+			if (tcon->need_reconnect) {
+				tcon->tc_count++;
+				list_add_tail(&tcon->rlist, &tmp_list);
+				tcon_exist = true;
+			}
+		}
+	}
+	/*
+	 * Get the reference to server struct to be sure that the last call of
+	 * cifs_put_tcon() in the loop below won't release the server pointer.
+	 */
+	if (tcon_exist)
+		server->srv_count++;
+
+	spin_unlock(&cifs_tcp_ses_lock);
+
+	list_for_each_entry_safe(tcon, tcon2, &tmp_list, rlist) {
+		smb2_reconnect(SMB2_ECHO, tcon);
+		list_del_init(&tcon->rlist);
+		cifs_put_tcon(tcon);
+	}
+
+	cifs_dbg(FYI, "Reconnecting tcons finished\n");
+	mutex_unlock(&server->reconnect_mutex);
+
+	/* now we can safely release srv struct */
+	if (tcon_exist)
+		cifs_put_tcp_session(server, 1);
+}
+
 int
 SMB2_echo(struct TCP_Server_Info *server)
 {
@@ -1834,32 +1882,11 @@ SMB2_echo(struct TCP_Server_Info *server
 	cifs_dbg(FYI, "In echo request\n");
 
 	if (server->tcpStatus == CifsNeedNegotiate) {
-		struct list_head *tmp, *tmp2;
-		struct cifs_ses *ses;
-		struct cifs_tcon *tcon;
-
-		cifs_dbg(FYI, "Need negotiate, reconnecting tcons\n");
-		spin_lock(&cifs_tcp_ses_lock);
-		list_for_each(tmp, &server->smb_ses_list) {
-			ses = list_entry(tmp, struct cifs_ses, smb_ses_list);
-			list_for_each(tmp2, &ses->tcon_list) {
-				tcon = list_entry(tmp2, struct cifs_tcon,
-						  tcon_list);
-				/* add check for persistent handle reconnect */
-				if (tcon && tcon->need_reconnect) {
-					spin_unlock(&cifs_tcp_ses_lock);
-					rc = smb2_reconnect(SMB2_ECHO, tcon);
-					spin_lock(&cifs_tcp_ses_lock);
-				}
-			}
-		}
-		spin_unlock(&cifs_tcp_ses_lock);
+		/* No need to send echo on newly established connections */
+		queue_delayed_work(cifsiod_wq, &server->reconnect, 0);
+		return rc;
 	}
 
-	/* if no session, renegotiate failed above */
-	if (server->tcpStatus == CifsNeedNegotiate)
-		return -EIO;
-
 	rc = small_smb2_init(SMB2_ECHO, NULL, (void **)&req);
 	if (rc)
 		return rc;
--- a/fs/cifs/smb2proto.h
+++ b/fs/cifs/smb2proto.h
@@ -95,6 +95,7 @@ extern int smb2_open_file(const unsigned
 extern int smb2_unlock_range(struct cifsFileInfo *cfile,
 			     struct file_lock *flock, const unsigned int xid);
 extern int smb2_push_mandatory_locks(struct cifsFileInfo *cfile);
+extern void smb2_reconnect_server(struct work_struct *work);
 
 /*
  * SMB2 Worker functions - most of protocol specific implementation details

[PATCH 4.4 52/60] CIFS: Fix missing nls unload in smb2_reconnect()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pavel Shilovsky <pshilov@microsoft.com>

commit 4772c79599564bd08ee6682715a7d3516f67433f upstream.

Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/smb2pdu.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -278,7 +278,7 @@ out:
 	case SMB2_CHANGE_NOTIFY:
 	case SMB2_QUERY_INFO:
 	case SMB2_SET_INFO:
-		return -EAGAIN;
+		rc = -EAGAIN;
 	}
 	unload_nls(nls_codepage);
 	return rc;

[PATCH 4.4 53/60] CIFS: Fix a possible memory corruption in push locks

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pavel Shilovsky <pshilov@microsoft.com>

commit e3d240e9d505fc67f8f8735836df97a794bbd946 upstream.

If maxBuf is not 0 but less than a size of SMB2 lock structure
we can end up with a memory corruption.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/smb2file.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/cifs/smb2file.c
+++ b/fs/cifs/smb2file.c
@@ -260,7 +260,7 @@ smb2_push_mandatory_locks(struct cifsFil
 	 * and check it for zero before using.
 	 */
 	max_buf = tlink_tcon(cfile->tlink)->ses->server->maxBuf;
-	if (!max_buf) {
+	if (max_buf < sizeof(struct smb2_lock_element)) {
 		free_xid(xid);
 		return -EINVAL;
 	}

[PATCH 4.4 54/60] kernel/watchdog: use nmi registers snapshot in hardlockup handler

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>

commit 4d1f0fb096aedea7bb5489af93498a82e467c480 upstream.

NMI handler doesn't call set_irq_regs(), it's set only by normal IRQ.
Thus get_irq_regs() returns NULL or stale registers snapshot with IP/SP
pointing to the code interrupted by IRQ which was interrupted by NMI.
NULL isn't a problem: in this case watchdog calls dump_stack() and
prints full stack trace including NMI.  But if we're stuck in IRQ
handler then NMI watchlog will print stack trace without IRQ part at
all.

This patch uses registers snapshot passed into NMI handler as arguments:
these registers point exactly to the instruction interrupted by NMI.

Fixes: 55537871ef66 ("kernel/watchdog.c: perform all-CPU backtrace in case of hard lockup")
Link: http://lkml.kernel.org/r/146771764784.86724.6006627197118544150.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/watchdog.c |    1 -
 1 file changed, 1 deletion(-)

--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -328,7 +328,6 @@ static void watchdog_overflow_callback(s
 	 */
 	if (is_hardlockup()) {
 		int this_cpu = smp_processor_id();
-		struct pt_regs *regs = get_irq_regs();
 
 		/* only print hardlockups once */
 		if (__this_cpu_read(hard_watchdog_warn) == true)

[PATCH 4.4 55/60] kernel/debug/debug_core.c: more properly delay for secondary CPUs

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Douglas Anderson <dianders@chromium.org>

commit 2d13bb6494c807bcf3f78af0e96c0b8615a94385 upstream.

We've got a delay loop waiting for secondary CPUs.  That loop uses
loops_per_jiffy.  However, loops_per_jiffy doesn't actually mean how
many tight loops make up a jiffy on all architectures.  It is quite
common to see things like this in the boot log:

  Calibrating delay loop (skipped), value calculated using timer
  frequency.. 48.00 BogoMIPS (lpj=24000)

In my case I was seeing lots of cases where other CPUs timed out
entering the debugger only to print their stack crawls shortly after the
kdb> prompt was written.

Elsewhere in kgdb we already use udelay(), so that should be safe enough
to use to implement our timeout.  We'll delay 1 ms for 1000 times, which
should give us a full second of delay (just like the old code wanted)
but allow us to notice that we're done every 1 ms.

[akpm@linux-foundation.org: simplifications, per Daniel]
Link: http://lkml.kernel.org/r/1477091361-2039-1-git-send-email-dianders@chromium.org
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/debug/debug_core.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -598,11 +598,11 @@ return_normal:
 	/*
 	 * Wait for the other CPUs to be notified and be waiting for us:
 	 */
-	time_left = loops_per_jiffy * HZ;
+	time_left = MSEC_PER_SEC;
 	while (kgdb_do_roundup && --time_left &&
 	       (atomic_read(&masters_in_kgdb) + atomic_read(&slaves_in_kgdb)) !=
 		   online_cpus)
-		cpu_relax();
+		udelay(1000);
 	if (!time_left)
 		pr_crit("Timed out waiting for secondary CPUs.\n");
 

[PATCH 4.4 56/60] tpm xen: Remove bogus tpm_chip_unregister

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>

commit 1f0f30e404b3d8f4597a2d9b77fba55452f8fd0e upstream.

tpm_chip_unregister can only be called after tpm_chip_register.
devm manages the allocation so no unwind is needed here.

Fixes: afb5abc262e96 ("tpm: two-phase chip management functions")
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/tpm/xen-tpmfront.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/char/tpm/xen-tpmfront.c
+++ b/drivers/char/tpm/xen-tpmfront.c
@@ -305,7 +305,6 @@ static int tpmfront_probe(struct xenbus_
 	rv = setup_ring(dev, priv);
 	if (rv) {
 		chip = dev_get_drvdata(&dev->dev);
-		tpm_chip_unregister(chip);
 		ring_free(priv);
 		return rv;
 	}

[PATCH 4.4 57/60] xen/gntdev: Use VM_MIXEDMAP instead of VM_IO to avoid NUMA balancing

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Boris Ostrovsky <boris.ostrovsky@oracle.com>

commit 30faaafdfa0c754c91bac60f216c9f34a2bfdf7e upstream.

Commit 9c17d96500f7 ("xen/gntdev: Grant maps should not be subject to
NUMA balancing") set VM_IO flag to prevent grant maps from being
subjected to NUMA balancing.

It was discovered recently that this flag causes get_user_pages() to
always fail with -EFAULT.

check_vma_flags
__get_user_pages
__get_user_pages_locked
__get_user_pages_unlocked
get_user_pages_fast
iov_iter_get_pages
dio_refill_pages
do_direct_IO
do_blockdev_direct_IO
do_blockdev_direct_IO
ext4_direct_IO_read
generic_file_read_iter
aio_run_iocb

(which can happen if guest's vdisk has direct-io-safe option).

To avoid this let's use VM_MIXEDMAP flag instead --- it prevents
NUMA balancing just as VM_IO does and has no effect on
check_vma_flags().


Reported-by: Olaf Hering <olaf@aepfle.de>
Suggested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Hugh Dickins <hughd@google.com>
Tested-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/gntdev.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -804,7 +804,7 @@ static int gntdev_mmap(struct file *flip
 
 	vma->vm_ops = &gntdev_vmops;
 
-	vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP | VM_IO;
+	vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP | VM_MIXEDMAP;
 
 	if (use_ptemod)
 		vma->vm_flags |= VM_DONTCOPY;

[PATCH 4.4 58/60] arm/xen: Use alloc_percpu rather than __alloc_percpu

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julien Grall <julien.grall@arm.com>

commit 24d5373dda7c00a438d26016bce140299fae675e upstream.

The function xen_guest_init is using __alloc_percpu with an alignment
which are not power of two.

However, the percpu allocator never supported alignments which are not power
of two and has always behaved incorectly in thise case.

Commit 3ca45a4 "percpu: ensure requested alignment is power of two"
introduced a check which trigger a warning [1] when booting linux-next
on Xen. But in reality this bug was always present.

This can be fixed by replacing the call to __alloc_percpu with
alloc_percpu. The latter will use an alignment which are a power of two.

[1]

[    0.023921] illegal size (48) or align (48) for percpu allocation
[    0.024167] ------------[ cut here ]------------
[    0.024344] WARNING: CPU: 0 PID: 1 at linux/mm/percpu.c:892 pcpu_alloc+0x88/0x6c0
[    0.024584] Modules linked in:
[    0.024708]
[    0.024804] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
4.9.0-rc7-next-20161128 #473
[    0.025012] Hardware name: Foundation-v8A (DT)
[    0.025162] task: ffff80003d870000 task.stack: ffff80003d844000
[    0.025351] PC is at pcpu_alloc+0x88/0x6c0
[    0.025490] LR is at pcpu_alloc+0x88/0x6c0
[    0.025624] pc : [<ffff00000818e678>] lr : [<ffff00000818e678>]
pstate: 60000045
[    0.025830] sp : ffff80003d847cd0
[    0.025946] x29: ffff80003d847cd0 x28: 0000000000000000
[    0.026147] x27: 0000000000000000 x26: 0000000000000000
[    0.026348] x25: 0000000000000000 x24: 0000000000000000
[    0.026549] x23: 0000000000000000 x22: 00000000024000c0
[    0.026752] x21: ffff000008e97000 x20: 0000000000000000
[    0.026953] x19: 0000000000000030 x18: 0000000000000010
[    0.027155] x17: 0000000000000a3f x16: 00000000deadbeef
[    0.027357] x15: 0000000000000006 x14: ffff000088f79c3f
[    0.027573] x13: ffff000008f79c4d x12: 0000000000000041
[    0.027782] x11: 0000000000000006 x10: 0000000000000042
[    0.027995] x9 : ffff80003d847a40 x8 : 6f697461636f6c6c
[    0.028208] x7 : 6120757063726570 x6 : ffff000008f79c84
[    0.028419] x5 : 0000000000000005 x4 : 0000000000000000
[    0.028628] x3 : 0000000000000000 x2 : 000000000000017f
[    0.028840] x1 : ffff80003d870000 x0 : 0000000000000035
[    0.029056]
[    0.029152] ---[ end trace 0000000000000000 ]---
[    0.029297] Call trace:
[    0.029403] Exception stack(0xffff80003d847b00 to
                               0xffff80003d847c30)
[    0.029621] 7b00: 0000000000000030 0001000000000000
ffff80003d847cd0 ffff00000818e678
[    0.029901] 7b20: 0000000000000002 0000000000000004
ffff000008f7c060 0000000000000035
[    0.030153] 7b40: ffff000008f79000 ffff000008c4cd88
ffff80003d847bf0 ffff000008101778
[    0.030402] 7b60: 0000000000000030 0000000000000000
ffff000008e97000 00000000024000c0
[    0.030647] 7b80: 0000000000000000 0000000000000000
0000000000000000 0000000000000000
[    0.030895] 7ba0: 0000000000000035 ffff80003d870000
000000000000017f 0000000000000000
[    0.031144] 7bc0: 0000000000000000 0000000000000005
ffff000008f79c84 6120757063726570
[    0.031394] 7be0: 6f697461636f6c6c ffff80003d847a40
0000000000000042 0000000000000006
[    0.031643] 7c00: 0000000000000041 ffff000008f79c4d
ffff000088f79c3f 0000000000000006
[    0.031877] 7c20: 00000000deadbeef 0000000000000a3f
[    0.032051] [<ffff00000818e678>] pcpu_alloc+0x88/0x6c0
[    0.032229] [<ffff00000818ece8>] __alloc_percpu+0x18/0x20
[    0.032409] [<ffff000008d9606c>] xen_guest_init+0x174/0x2f4
[    0.032591] [<ffff0000080830f8>] do_one_initcall+0x38/0x130
[    0.032783] [<ffff000008d90c34>] kernel_init_freeable+0xe0/0x248
[    0.032995] [<ffff00000899a890>] kernel_init+0x10/0x100
[    0.033172] [<ffff000008082ec0>] ret_from_fork+0x10/0x50

Reported-by: Wei Chen <wei.chen@arm.com>
Link: https://lkml.org/lkml/2016/11/28/669
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/xen/enlighten.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -239,8 +239,7 @@ static int __init xen_guest_init(void)
 	 * for secondary CPUs as they are brought up.
 	 * For uniformity we use VCPUOP_register_vcpu_info even on cpu0.
 	 */
-	xen_vcpu_info = __alloc_percpu(sizeof(struct vcpu_info),
-			                       sizeof(struct vcpu_info));
+	xen_vcpu_info = alloc_percpu(struct vcpu_info);
 	if (xen_vcpu_info == NULL)
 		return -ENOMEM;
 

[PATCH 4.4 59/60] xfs: set AGI buffer type in xlog_recover_clear_agi_bucket

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Sandeen <sandeen@sandeen.net>

commit 6b10b23ca94451fae153a5cc8d62fd721bec2019 upstream.

xlog_recover_clear_agi_bucket didn't set the
type to XFS_BLFT_AGI_BUF, so we got a warning during log
replay (or an ASSERT on a debug build).

    XFS (md0): Unknown buffer type 0!
    XFS (md0): _xfs_buf_ioapply: no ops on block 0xaea8802/0x1

Fix this, as was done in f19b872b for 2 other locations
with the same problem.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xfs/xfs_log_recover.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -3980,6 +3980,7 @@ xlog_recover_clear_agi_bucket(
 	agi->agi_unlinked[bucket] = cpu_to_be32(NULLAGINO);
 	offset = offsetof(xfs_agi_t, agi_unlinked) +
 		 (sizeof(xfs_agino_t) * bucket);
+	xfs_trans_buf_set_type(tp, agibp, XFS_BLFT_AGI_BUF);
 	xfs_trans_log_buf(tp, agibp, offset,
 			  (offset + sizeof(xfs_agino_t) - 1));
 

[PATCH 4.4 60/60] driver core: fix race between creating/querying glue dir and its cleanup

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ming Lei <ming.lei@canonical.com>

commit cebf8fd16900fdfd58c0028617944f808f97fe50 upstream.

The global mutex of 'gdp_mutex' is used to serialize creating/querying
glue dir and its cleanup. Turns out it isn't a perfect way because
part(kobj_kset_leave()) of the actual cleanup action() is done inside
the release handler of the glue dir kobject. That means gdp_mutex has
to be held before releasing the last reference count of the glue dir
kobject.

This patch moves glue dir's cleanup after kobject_del() in device_del()
for avoiding the race.

Cc: Yijing Wang <wangyijing@huawei.com>
Reported-by: Chandra Sekhar Lingutla <clingutla@codeaurora.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/base/core.c |   39 +++++++++++++++++++++++++++++----------
 1 file changed, 29 insertions(+), 10 deletions(-)

--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -836,11 +836,29 @@ static struct kobject *get_device_parent
 	return NULL;
 }
 
+static inline bool live_in_glue_dir(struct kobject *kobj,
+				    struct device *dev)
+{
+	if (!kobj || !dev->class ||
+	    kobj->kset != &dev->class->p->glue_dirs)
+		return false;
+	return true;
+}
+
+static inline struct kobject *get_glue_dir(struct device *dev)
+{
+	return dev->kobj.parent;
+}
+
+/*
+ * make sure cleaning up dir as the last step, we need to make
+ * sure .release handler of kobject is run with holding the
+ * global lock
+ */
 static void cleanup_glue_dir(struct device *dev, struct kobject *glue_dir)
 {
 	/* see if we live in a "glue" directory */
-	if (!glue_dir || !dev->class ||
-	    glue_dir->kset != &dev->class->p->glue_dirs)
+	if (!live_in_glue_dir(glue_dir, dev))
 		return;
 
 	mutex_lock(&gdp_mutex);
@@ -848,11 +866,6 @@ static void cleanup_glue_dir(struct devi
 	mutex_unlock(&gdp_mutex);
 }
 
-static void cleanup_device_parent(struct device *dev)
-{
-	cleanup_glue_dir(dev, dev->kobj.parent);
-}
-
 static int device_add_class_symlinks(struct device *dev)
 {
 	struct device_node *of_node = dev_of_node(dev);
@@ -1028,6 +1041,7 @@ int device_add(struct device *dev)
 	struct kobject *kobj;
 	struct class_interface *class_intf;
 	int error = -EINVAL;
+	struct kobject *glue_dir = NULL;
 
 	dev = get_device(dev);
 	if (!dev)
@@ -1072,8 +1086,10 @@ int device_add(struct device *dev)
 	/* first, register with generic layer. */
 	/* we require the name to be set before, and pass NULL */
 	error = kobject_add(&dev->kobj, dev->kobj.parent, NULL);
-	if (error)
+	if (error) {
+		glue_dir = get_glue_dir(dev);
 		goto Error;
+	}
 
 	/* notify platform of device entry */
 	if (platform_notify)
@@ -1154,9 +1170,10 @@ done:
 	device_remove_file(dev, &dev_attr_uevent);
  attrError:
 	kobject_uevent(&dev->kobj, KOBJ_REMOVE);
+	glue_dir = get_glue_dir(dev);
 	kobject_del(&dev->kobj);
  Error:
-	cleanup_device_parent(dev);
+	cleanup_glue_dir(dev, glue_dir);
 	put_device(parent);
 name_error:
 	kfree(dev->p);
@@ -1232,6 +1249,7 @@ EXPORT_SYMBOL_GPL(put_device);
 void device_del(struct device *dev)
 {
 	struct device *parent = dev->parent;
+	struct kobject *glue_dir = NULL;
 	struct class_interface *class_intf;
 
 	/* Notify clients of device removal.  This call must come
@@ -1276,8 +1294,9 @@ void device_del(struct device *dev)
 		blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
 					     BUS_NOTIFY_REMOVED_DEVICE, dev);
 	kobject_uevent(&dev->kobj, KOBJ_REMOVE);
-	cleanup_device_parent(dev);
+	glue_dir = get_glue_dir(dev);
 	kobject_del(&dev->kobj);
+	cleanup_glue_dir(dev, glue_dir);
 	put_device(parent);
 }
 EXPORT_SYMBOL_GPL(device_del);

Re: [PATCH 4.4 00/60] 4.4.40-stable review

[Shuah Khan]

On 01/04/2017 01:46 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.40 release.
> There are 60 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri Jan  6 20:06:51 UTC 2017.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.40-rc1.gz
> or in the git tree and branch at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

-- 
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America(Silicon Valley)
shuah.kh@samsung.com

Re: [PATCH 4.4 00/60] 4.4.40-stable review

[Guenter Roeck]

On 01/04/2017 12:46 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.40 release.
> There are 60 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri Jan  6 20:06:51 UTC 2017.
> Anything received after that time might be too late.
>
Build results:
	total: 149 pass: 149 fail: 0
Qemu test results:
	total: 115 pass: 115 fail: 0

Details are available at http://kerneltests.org/builders.

Guenter

Re: [PATCH 4.4 00/60] 4.4.40-stable review

[Guillaume Nault]

On Wed, Jan 04, 2017 at 09:46:45PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.40 release.
> There are 60 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
Please also consider applying 205e1e255c47 ("ppp: defer netns reference
release for ppp channel") if it's not too late. It fixes 1f461dcdd296
("ppp: take reference on channels netns"), which is commit 046ea8180eca
in linux-4.4.y.

Thanks,

Guillaume

Re: [PATCH 4.4 00/60] 4.4.40-stable review

[Greg Kroah-Hartman]

On Thu, Jan 05, 2017 at 04:33:56PM +0100, Guillaume Nault wrote:
> On Wed, Jan 04, 2017 at 09:46:45PM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.4.40 release.
> > There are 60 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> Please also consider applying 205e1e255c47 ("ppp: defer netns reference
> release for ppp channel") if it's not too late. It fixes 1f461dcdd296
> ("ppp: take reference on channels netns"), which is commit 046ea8180eca
> in linux-4.4.y.

Sorry about that, you told me about this a few weeks ago, and I missed
it for this release (still in my huge backlog).  Now queued up.

thanks,

greg k-h