[PATCH net-next v2 0/3] add phy shared storage

[PATCH net-next v2 0/3] add phy shared storage

[Michael Walle]

Introduce the concept of a shared PHY storage which can be used by some
QSGMII PHYs to ease initialization and access to global per-package
registers.

Changes since v1:
 - fix typos and add a comment, thanks Florian.
 - check for "addr < 0" in phy_package_join()
 - remove multiple blank lines and make "checkpatch.pl --strict" happy

Changes since RFC:
 - check return code of kzalloc()
 - fix local variable ordering (reverse christmas tree)
 - add priv_size argument to phy_package_join()
 - add Tested-by tag, thanks Vladimir.

Michael Walle (3):
  net: phy: add concept of shared storage for PHYs
  net: phy: bcm54140: use phy_package_shared
  net: phy: mscc: use phy_package_shared

 drivers/net/phy/bcm54140.c       |  57 +++----------
 drivers/net/phy/mdio_bus.c       |   1 +
 drivers/net/phy/mscc/mscc.h      |   1 -
 drivers/net/phy/mscc/mscc_main.c | 101 +++++++---------------
 drivers/net/phy/phy_device.c     | 138 +++++++++++++++++++++++++++++++
 include/linux/phy.h              |  90 ++++++++++++++++++++
 6 files changed, 271 insertions(+), 117 deletions(-)

-- 
2.20.1

[PATCH net-next v2 1/3] net: phy: add concept of shared storage for PHYs

[Michael Walle]

There are packages which contain multiple PHY devices, eg. a quad PHY
transceiver. Provide functions to allocate and free shared storage.

Usually, a quad PHY contains global registers, which don't belong to any
PHY. Provide convenience functions to access these registers.

Signed-off-by: Michael Walle <michael@walle.cc>
---
 drivers/net/phy/mdio_bus.c   |   1 +
 drivers/net/phy/phy_device.c | 138 +++++++++++++++++++++++++++++++++++
 include/linux/phy.h          |  89 ++++++++++++++++++++++
 3 files changed, 228 insertions(+)

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 3e79b96fa344..255fdfcc13a6 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -614,6 +614,7 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
 	}
 
 	mutex_init(&bus->mdio_lock);
+	mutex_init(&bus->shared_lock);
 
 	/* de-assert bus level PHY GPIO reset */
 	gpiod = devm_gpiod_get_optional(&bus->dev, "reset", GPIOD_OUT_LOW);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 7e1ddd5745d2..b1c5e4503bc4 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1461,6 +1461,144 @@ bool phy_driver_is_genphy_10g(struct phy_device *phydev)
 }
 EXPORT_SYMBOL_GPL(phy_driver_is_genphy_10g);
 
+/**
+ * phy_package_join - join a common PHY group
+ * @phydev: target phy_device struct
+ * @addr: cookie and PHY address for global register access
+ * @priv_size: if non-zero allocate this amount of bytes for private data
+ *
+ * This joins a PHY group and provides a shared storage for all phydevs in
+ * this group. This is intended to be used for packages which contain
+ * more than one PHY, for example a quad PHY transceiver.
+ *
+ * The addr parameter serves as a cookie which has to have the same value
+ * for all members of one group and as a PHY address to access generic
+ * registers of a PHY package. Usually, one of the PHY addresses of the
+ * different PHYs in the package provides access to these global registers.
+ * The address which is given here, will be used in the phy_package_read()
+ * and phy_package_write() convenience functions. If your PHY doesn't have
+ * global registers you can just pick any of the PHY addresses.
+ *
+ * This will set the shared pointer of the phydev to the shared storage.
+ * If this is the first call for a this cookie the shared storage will be
+ * allocated. If priv_size is non-zero, the given amount of bytes are
+ * allocated for the priv member.
+ *
+ * Returns < 1 on error, 0 on success. Esp. calling phy_package_join()
+ * with the same cookie but a different priv_size is an error.
+ */
+int phy_package_join(struct phy_device *phydev, int addr, size_t priv_size)
+{
+	struct mii_bus *bus = phydev->mdio.bus;
+	struct phy_package_shared *shared;
+	int ret;
+
+	if (addr < 0 || addr >= PHY_MAX_ADDR)
+		return -EINVAL;
+
+	mutex_lock(&bus->shared_lock);
+	shared = bus->shared[addr];
+	if (!shared) {
+		ret = -ENOMEM;
+		shared = kzalloc(sizeof(*shared), GFP_KERNEL);
+		if (!shared)
+			goto err_unlock;
+		if (priv_size) {
+			shared->priv = kzalloc(priv_size, GFP_KERNEL);
+			if (!shared->priv)
+				goto err_free;
+			shared->priv_size = priv_size;
+		}
+		shared->addr = addr;
+		refcount_set(&shared->refcnt, 1);
+		bus->shared[addr] = shared;
+	} else {
+		ret = -EINVAL;
+		if (priv_size && priv_size != shared->priv_size)
+			goto err_unlock;
+		refcount_inc(&shared->refcnt);
+	}
+	mutex_unlock(&bus->shared_lock);
+
+	phydev->shared = shared;
+
+	return 0;
+
+err_free:
+	kfree(shared);
+err_unlock:
+	mutex_unlock(&bus->shared_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_package_join);
+
+/**
+ * phy_package_leave - leave a common PHY group
+ * @phydev: target phy_device struct
+ *
+ * This leaves a PHY group created by phy_package_join(). If this phydev
+ * was the last user of the shared data between the group, this data is
+ * freed. Resets the phydev->shared pointer to NULL.
+ */
+void phy_package_leave(struct phy_device *phydev)
+{
+	struct phy_package_shared *shared = phydev->shared;
+	struct mii_bus *bus = phydev->mdio.bus;
+
+	if (!shared)
+		return;
+
+	if (refcount_dec_and_mutex_lock(&shared->refcnt, &bus->shared_lock)) {
+		bus->shared[shared->addr] = NULL;
+		mutex_unlock(&bus->shared_lock);
+		kfree(shared->priv);
+		kfree(shared);
+	}
+
+	phydev->shared = NULL;
+}
+EXPORT_SYMBOL_GPL(phy_package_leave);
+
+static void devm_phy_package_leave(struct device *dev, void *res)
+{
+	phy_package_leave(*(struct phy_device **)res);
+}
+
+/**
+ * devm_phy_package_join - resource managed phy_package_join()
+ * @dev: device that is registering this PHY package
+ * @phydev: target phy_device struct
+ * @addr: cookie and PHY address for global register access
+ * @priv_size: if non-zero allocate this amount of bytes for private data
+ *
+ * Managed phy_package_join(). Shared storage fetched by this function,
+ * phy_package_leave() is automatically called on driver detach. See
+ * phy_package_join() for more information.
+ */
+int devm_phy_package_join(struct device *dev, struct phy_device *phydev,
+			  int addr, size_t priv_size)
+{
+	struct phy_device **ptr;
+	int ret;
+
+	ptr = devres_alloc(devm_phy_package_leave, sizeof(*ptr),
+			   GFP_KERNEL);
+	if (!ptr)
+		return -ENOMEM;
+
+	ret = phy_package_join(phydev, addr, priv_size);
+
+	if (!ret) {
+		*ptr = phydev;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(devm_phy_package_join);
+
 /**
  * phy_detach - detach a PHY device from its network device
  * @phydev: target phy_device struct
diff --git a/include/linux/phy.h b/include/linux/phy.h
index e2bfb9240587..1d36ac608159 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -25,6 +25,7 @@
 #include <linux/u64_stats_sync.h>
 #include <linux/irqreturn.h>
 #include <linux/iopoll.h>
+#include <linux/refcount.h>
 
 #include <linux/atomic.h>
 
@@ -227,6 +228,28 @@ struct mdio_bus_stats {
 	struct u64_stats_sync syncp;
 };
 
+/* Represents a shared structure between different phydev's in the same
+ * package, for example a quad PHY. See phy_package_join() and
+ * phy_package_leave().
+ */
+struct phy_package_shared {
+	int addr;
+	refcount_t refcnt;
+	unsigned long flags;
+	size_t priv_size;
+
+	/* private data pointer */
+	/* note that this pointer is shared between different phydevs and
+	 * the user has to take care of appropriate locking. It is allocated
+	 * and freed automatically by phy_package_join() and
+	 * phy_package_leave().
+	 */
+	void *priv;
+};
+
+/* used as bit number in atomic bitops */
+#define PHY_SHARED_F_INIT_DONE 0
+
 /*
  * The Bus class for PHYs.  Devices which provide access to
  * PHYs should register using this structure
@@ -278,6 +301,12 @@ struct mii_bus {
 	int reset_delay_us;
 	/* RESET GPIO descriptor pointer */
 	struct gpio_desc *reset_gpiod;
+
+	/* protect access to the shared element */
+	struct mutex shared_lock;
+
+	/* shared state across different PHYs */
+	struct phy_package_shared *shared[PHY_MAX_ADDR];
 };
 #define to_mii_bus(d) container_of(d, struct mii_bus, dev)
 
@@ -478,6 +507,10 @@ struct phy_device {
 	/* For use by PHYs to maintain extra state */
 	void *priv;
 
+	/* shared data pointer */
+	/* For use by PHYs inside the same package that need a shared state. */
+	struct phy_package_shared *shared;
+
 	/* Interrupt and Polling infrastructure */
 	struct delayed_work state_queue;
 
@@ -1354,6 +1387,10 @@ int phy_ethtool_get_link_ksettings(struct net_device *ndev,
 int phy_ethtool_set_link_ksettings(struct net_device *ndev,
 				   const struct ethtool_link_ksettings *cmd);
 int phy_ethtool_nway_reset(struct net_device *ndev);
+int phy_package_join(struct phy_device *phydev, int addr, size_t priv_size);
+void phy_package_leave(struct phy_device *phydev);
+int devm_phy_package_join(struct device *dev, struct phy_device *phydev,
+			  int addr, size_t priv_size);
 
 #if IS_ENABLED(CONFIG_PHYLIB)
 int __init mdio_bus_init(void);
@@ -1406,6 +1443,58 @@ static inline int phy_ethtool_get_stats(struct phy_device *phydev,
 	return 0;
 }
 
+static inline int phy_package_read(struct phy_device *phydev, u32 regnum)
+{
+	struct phy_package_shared *shared = phydev->shared;
+
+	if (!shared)
+		return -EIO;
+
+	return mdiobus_read(phydev->mdio.bus, shared->addr, regnum);
+}
+
+static inline int __phy_package_read(struct phy_device *phydev, u32 regnum)
+{
+	struct phy_package_shared *shared = phydev->shared;
+
+	if (!shared)
+		return -EIO;
+
+	return __mdiobus_read(phydev->mdio.bus, shared->addr, regnum);
+}
+
+static inline int phy_package_write(struct phy_device *phydev,
+				    u32 regnum, u16 val)
+{
+	struct phy_package_shared *shared = phydev->shared;
+
+	if (!shared)
+		return -EIO;
+
+	return mdiobus_write(phydev->mdio.bus, shared->addr, regnum, val);
+}
+
+static inline int __phy_package_write(struct phy_device *phydev,
+				      u32 regnum, u16 val)
+{
+	struct phy_package_shared *shared = phydev->shared;
+
+	if (!shared)
+		return -EIO;
+
+	return __mdiobus_write(phydev->mdio.bus, shared->addr, regnum, val);
+}
+
+static inline bool phy_package_init_once(struct phy_device *phydev)
+{
+	struct phy_package_shared *shared = phydev->shared;
+
+	if (!shared)
+		return false;
+
+	return !test_and_set_bit(PHY_SHARED_F_INIT_DONE, &shared->flags);
+}
+
 extern struct bus_type mdio_bus_type;
 
 struct mdio_board_info {
-- 
2.20.1

[PATCH net-next v2 2/3] net: phy: bcm54140: use phy_package_shared

[Michael Walle]

Use the new phy_package_shared common storage to ease the package
initialization and to access the global registers.

Signed-off-by: Michael Walle <michael@walle.cc>
---
 drivers/net/phy/bcm54140.c | 57 ++++++++------------------------------
 1 file changed, 11 insertions(+), 46 deletions(-)

diff --git a/drivers/net/phy/bcm54140.c b/drivers/net/phy/bcm54140.c
index 400d7c3c405a..9ef37a3bc2bb 100644
--- a/drivers/net/phy/bcm54140.c
+++ b/drivers/net/phy/bcm54140.c
@@ -132,7 +132,6 @@ struct bcm54140_priv {
 	int port;
 	int base_addr;
 #if IS_ENABLED(CONFIG_HWMON)
-	bool pkg_init;
 	/* protect the alarm bits */
 	struct mutex alarm_lock;
 	u16 alarm;
@@ -407,36 +406,6 @@ static int bcm54140_enable_monitoring(struct phy_device *phydev)
 	return bcm_phy_modify_rdb(phydev, BCM54140_RDB_MON_CTRL, mask, set);
 }
 
-/* Check if one PHY has already done the init of the parts common to all PHYs
- * in the Quad PHY package.
- */
-static bool bcm54140_is_pkg_init(struct phy_device *phydev)
-{
-	struct bcm54140_priv *priv = phydev->priv;
-	struct mii_bus *bus = phydev->mdio.bus;
-	int base_addr = priv->base_addr;
-	struct phy_device *phy;
-	int i;
-
-	/* Quad PHY */
-	for (i = 0; i < 4; i++) {
-		phy = mdiobus_get_phy(bus, base_addr + i);
-		if (!phy)
-			continue;
-
-		if ((phy->phy_id & phydev->drv->phy_id_mask) !=
-		    (phydev->drv->phy_id & phydev->drv->phy_id_mask))
-			continue;
-
-		priv = phy->priv;
-
-		if (priv && priv->pkg_init)
-			return true;
-	}
-
-	return false;
-}
-
 static int bcm54140_probe_once(struct phy_device *phydev)
 {
 	struct device *hwmon;
@@ -457,38 +426,34 @@ static int bcm54140_probe_once(struct phy_device *phydev)
 
 static int bcm54140_base_read_rdb(struct phy_device *phydev, u16 rdb)
 {
-	struct bcm54140_priv *priv = phydev->priv;
-	struct mii_bus *bus = phydev->mdio.bus;
 	int ret;
 
-	mutex_lock(&bus->mdio_lock);
-	ret = __mdiobus_write(bus, priv->base_addr, MII_BCM54XX_RDB_ADDR, rdb);
+	phy_lock_mdio_bus(phydev);
+	ret = __phy_package_write(phydev, MII_BCM54XX_RDB_ADDR, rdb);
 	if (ret < 0)
 		goto out;
 
-	ret = __mdiobus_read(bus, priv->base_addr, MII_BCM54XX_RDB_DATA);
+	ret = __phy_package_read(phydev, MII_BCM54XX_RDB_DATA);
 
 out:
-	mutex_unlock(&bus->mdio_lock);
+	phy_unlock_mdio_bus(phydev);
 	return ret;
 }
 
 static int bcm54140_base_write_rdb(struct phy_device *phydev,
 				   u16 rdb, u16 val)
 {
-	struct bcm54140_priv *priv = phydev->priv;
-	struct mii_bus *bus = phydev->mdio.bus;
 	int ret;
 
-	mutex_lock(&bus->mdio_lock);
-	ret = __mdiobus_write(bus, priv->base_addr, MII_BCM54XX_RDB_ADDR, rdb);
+	phy_lock_mdio_bus(phydev);
+	ret = __phy_package_write(phydev, MII_BCM54XX_RDB_ADDR, rdb);
 	if (ret < 0)
 		goto out;
 
-	ret = __mdiobus_write(bus, priv->base_addr, MII_BCM54XX_RDB_DATA, val);
+	ret = __phy_package_write(phydev, MII_BCM54XX_RDB_DATA, val);
 
 out:
-	mutex_unlock(&bus->mdio_lock);
+	phy_unlock_mdio_bus(phydev);
 	return ret;
 }
 
@@ -618,16 +583,16 @@ static int bcm54140_probe(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
+	devm_phy_package_join(&phydev->mdio.dev, phydev, priv->base_addr, 0);
+
 #if IS_ENABLED(CONFIG_HWMON)
 	mutex_init(&priv->alarm_lock);
 
-	if (!bcm54140_is_pkg_init(phydev)) {
+	if (phy_package_init_once(phydev)) {
 		ret = bcm54140_probe_once(phydev);
 		if (ret)
 			return ret;
 	}
-
-	priv->pkg_init = true;
 #endif
 
 	phydev_dbg(phydev, "probed (port %d, base PHY address %d)\n",
-- 
2.20.1

[PATCH net-next v2 3/3] net: phy: mscc: use phy_package_shared

[Michael Walle]

Use the new phy_package_shared common storage to ease the package
initialization and to access the global registers.

Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 drivers/net/phy/mscc/mscc.h      |   1 -
 drivers/net/phy/mscc/mscc_main.c | 101 ++++++++++---------------------
 2 files changed, 31 insertions(+), 71 deletions(-)

diff --git a/drivers/net/phy/mscc/mscc.h b/drivers/net/phy/mscc/mscc.h
index 030bf8b600df..acdd8ee61a39 100644
--- a/drivers/net/phy/mscc/mscc.h
+++ b/drivers/net/phy/mscc/mscc.h
@@ -353,7 +353,6 @@ struct vsc8531_private {
 	const struct vsc85xx_hw_stat *hw_stats;
 	u64 *stats;
 	int nstats;
-	bool pkg_init;
 	/* For multiple port PHYs; the MDIO address of the base PHY in the
 	 * package.
 	 */
diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c
index 5391acdece05..a505286b2195 100644
--- a/drivers/net/phy/mscc/mscc_main.c
+++ b/drivers/net/phy/mscc/mscc_main.c
@@ -691,27 +691,23 @@ static int vsc85xx_eee_init_seq_set(struct phy_device *phydev)
 /* phydev->bus->mdio_lock should be locked when using this function */
 static int phy_base_write(struct phy_device *phydev, u32 regnum, u16 val)
 {
-	struct vsc8531_private *priv = phydev->priv;
-
 	if (unlikely(!mutex_is_locked(&phydev->mdio.bus->mdio_lock))) {
 		dev_err(&phydev->mdio.dev, "MDIO bus lock not held!\n");
 		dump_stack();
 	}
 
-	return __mdiobus_write(phydev->mdio.bus, priv->base_addr, regnum, val);
+	return __phy_package_write(phydev, regnum, val);
 }
 
 /* phydev->bus->mdio_lock should be locked when using this function */
 static int phy_base_read(struct phy_device *phydev, u32 regnum)
 {
-	struct vsc8531_private *priv = phydev->priv;
-
 	if (unlikely(!mutex_is_locked(&phydev->mdio.bus->mdio_lock))) {
 		dev_err(&phydev->mdio.dev, "MDIO bus lock not held!\n");
 		dump_stack();
 	}
 
-	return __mdiobus_read(phydev->mdio.bus, priv->base_addr, regnum);
+	return __phy_package_read(phydev, regnum);
 }
 
 /* bus->mdio_lock should be locked when using this function */
@@ -1287,65 +1283,36 @@ static int vsc8584_config_pre_init(struct phy_device *phydev)
 	return ret;
 }
 
-/* Check if one PHY has already done the init of the parts common to all PHYs
- * in the Quad PHY package.
- */
-static bool vsc8584_is_pkg_init(struct phy_device *phydev, bool reversed)
+static void vsc8584_get_base_addr(struct phy_device *phydev)
 {
-	struct mii_bus *bus = phydev->mdio.bus;
-	struct vsc8531_private *vsc8531;
-	struct phy_device *phy;
-	int i, addr;
-
-	/* VSC8584 is a Quad PHY */
-	for (i = 0; i < 4; i++) {
-		vsc8531 = phydev->priv;
-
-		if (reversed)
-			addr = vsc8531->base_addr - i;
-		else
-			addr = vsc8531->base_addr + i;
-
-		phy = mdiobus_get_phy(bus, addr);
-		if (!phy)
-			continue;
+	struct vsc8531_private *vsc8531 = phydev->priv;
+	u16 val, addr;
 
-		if ((phy->phy_id & phydev->drv->phy_id_mask) !=
-		    (phydev->drv->phy_id & phydev->drv->phy_id_mask))
-			continue;
+	mutex_lock(&phydev->mdio.bus->mdio_lock);
+	__phy_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED);
 
-		vsc8531 = phy->priv;
+	addr = __phy_read(phydev, MSCC_PHY_EXT_PHY_CNTL_4);
+	addr >>= PHY_CNTL_4_ADDR_POS;
 
-		if (vsc8531 && vsc8531->pkg_init)
-			return true;
-	}
+	val = __phy_read(phydev, MSCC_PHY_ACTIPHY_CNTL);
+	mutex_unlock(&phydev->mdio.bus->mdio_lock);
 
-	return false;
+	if (val & PHY_ADDR_REVERSED)
+		vsc8531->base_addr = phydev->mdio.addr + addr;
+	else
+		vsc8531->base_addr = phydev->mdio.addr - addr;
 }
 
 static int vsc8584_config_init(struct phy_device *phydev)
 {
 	struct vsc8531_private *vsc8531 = phydev->priv;
-	u16 addr, val;
 	int ret, i;
+	u16 val;
 
 	phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
 
 	mutex_lock(&phydev->mdio.bus->mdio_lock);
 
-	__mdiobus_write(phydev->mdio.bus, phydev->mdio.addr,
-			MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED);
-	addr = __mdiobus_read(phydev->mdio.bus, phydev->mdio.addr,
-			      MSCC_PHY_EXT_PHY_CNTL_4);
-	addr >>= PHY_CNTL_4_ADDR_POS;
-
-	val = __mdiobus_read(phydev->mdio.bus, phydev->mdio.addr,
-			     MSCC_PHY_ACTIPHY_CNTL);
-	if (val & PHY_ADDR_REVERSED)
-		vsc8531->base_addr = phydev->mdio.addr + addr;
-	else
-		vsc8531->base_addr = phydev->mdio.addr - addr;
-
 	/* Some parts of the init sequence are identical for every PHY in the
 	 * package. Some parts are modifying the GPIO register bank which is a
 	 * set of registers that are affecting all PHYs, a few resetting the
@@ -1359,7 +1326,7 @@ static int vsc8584_config_init(struct phy_device *phydev)
 	 * do the correct init sequence for all PHYs that are package-critical
 	 * in this pre-init function.
 	 */
-	if (!vsc8584_is_pkg_init(phydev, val & PHY_ADDR_REVERSED ? 1 : 0)) {
+	if (phy_package_init_once(phydev)) {
 		/* The following switch statement assumes that the lowest
 		 * nibble of the phy_id_mask is always 0. This works because
 		 * the lowest nibble of the PHY_ID's below are also 0.
@@ -1388,8 +1355,6 @@ static int vsc8584_config_init(struct phy_device *phydev)
 			goto err;
 	}
 
-	vsc8531->pkg_init = true;
-
 	phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
 		       MSCC_PHY_PAGE_EXTENDED_GPIO);
 
@@ -1427,7 +1392,8 @@ static int vsc8584_config_init(struct phy_device *phydev)
 
 	/* Disable SerDes for 100Base-FX */
 	ret = vsc8584_cmd(phydev, PROC_CMD_FIBER_MEDIA_CONF |
-			  PROC_CMD_FIBER_PORT(addr) | PROC_CMD_FIBER_DISABLE |
+			  PROC_CMD_FIBER_PORT(vsc8531->base_addr) |
+			  PROC_CMD_FIBER_DISABLE |
 			  PROC_CMD_READ_MOD_WRITE_PORT |
 			  PROC_CMD_RST_CONF_PORT | PROC_CMD_FIBER_100BASE_FX);
 	if (ret)
@@ -1435,7 +1401,8 @@ static int vsc8584_config_init(struct phy_device *phydev)
 
 	/* Disable SerDes for 1000Base-X */
 	ret = vsc8584_cmd(phydev, PROC_CMD_FIBER_MEDIA_CONF |
-			  PROC_CMD_FIBER_PORT(addr) | PROC_CMD_FIBER_DISABLE |
+			  PROC_CMD_FIBER_PORT(vsc8531->base_addr) |
+			  PROC_CMD_FIBER_DISABLE |
 			  PROC_CMD_READ_MOD_WRITE_PORT |
 			  PROC_CMD_RST_CONF_PORT | PROC_CMD_FIBER_1000BASE_X);
 	if (ret)
@@ -1750,26 +1717,14 @@ static int vsc8514_config_init(struct phy_device *phydev)
 {
 	struct vsc8531_private *vsc8531 = phydev->priv;
 	unsigned long deadline;
-	u16 val, addr;
 	int ret, i;
+	u16 val;
 	u32 reg;
 
 	phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
 
 	mutex_lock(&phydev->mdio.bus->mdio_lock);
 
-	__phy_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED);
-
-	addr = __phy_read(phydev, MSCC_PHY_EXT_PHY_CNTL_4);
-	addr >>= PHY_CNTL_4_ADDR_POS;
-
-	val = __phy_read(phydev, MSCC_PHY_ACTIPHY_CNTL);
-
-	if (val & PHY_ADDR_REVERSED)
-		vsc8531->base_addr = phydev->mdio.addr + addr;
-	else
-		vsc8531->base_addr = phydev->mdio.addr - addr;
-
 	/* Some parts of the init sequence are identical for every PHY in the
 	 * package. Some parts are modifying the GPIO register bank which is a
 	 * set of registers that are affecting all PHYs, a few resetting the
@@ -1781,11 +1736,9 @@ static int vsc8514_config_init(struct phy_device *phydev)
 	 * do the correct init sequence for all PHYs that are package-critical
 	 * in this pre-init function.
 	 */
-	if (!vsc8584_is_pkg_init(phydev, val & PHY_ADDR_REVERSED ? 1 : 0))
+	if (phy_package_init_once(phydev))
 		vsc8514_config_pre_init(phydev);
 
-	vsc8531->pkg_init = true;
-
 	phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
 		       MSCC_PHY_PAGE_EXTENDED_GPIO);
 
@@ -1991,6 +1944,10 @@ static int vsc8514_probe(struct phy_device *phydev)
 
 	phydev->priv = vsc8531;
 
+	vsc8584_get_base_addr(phydev);
+	devm_phy_package_join(&phydev->mdio.dev, phydev,
+			      vsc8531->base_addr, 0);
+
 	vsc8531->nleds = 4;
 	vsc8531->supp_led_modes = VSC85XX_SUPP_LED_MODES;
 	vsc8531->hw_stats = vsc85xx_hw_stats;
@@ -2046,6 +2003,10 @@ static int vsc8584_probe(struct phy_device *phydev)
 
 	phydev->priv = vsc8531;
 
+	vsc8584_get_base_addr(phydev);
+	devm_phy_package_join(&phydev->mdio.dev, phydev,
+			      vsc8531->base_addr, 0);
+
 	vsc8531->nleds = 4;
 	vsc8531->supp_led_modes = VSC8584_SUPP_LED_MODES;
 	vsc8531->hw_stats = vsc8584_hw_stats;
-- 
2.20.1

Re: [PATCH net-next v2 2/3] net: phy: bcm54140: use phy_package_shared

[Andrew Lunn]

On Mon, May 04, 2020 at 11:31:35PM +0200, Michael Walle wrote:
> Use the new phy_package_shared common storage to ease the package
> initialization and to access the global registers.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH net-next v2 3/3] net: phy: mscc: use phy_package_shared

[Andrew Lunn]

On Mon, May 04, 2020 at 11:31:36PM +0200, Michael Walle wrote:
> Use the new phy_package_shared common storage to ease the package
> initialization and to access the global registers.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>
> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH net-next v2 1/3] net: phy: add concept of shared storage for PHYs

[Andrew Lunn]

On Mon, May 04, 2020 at 11:31:34PM +0200, Michael Walle wrote:
> There are packages which contain multiple PHY devices, eg. a quad PHY
> transceiver. Provide functions to allocate and free shared storage.
> 
> Usually, a quad PHY contains global registers, which don't belong to any
> PHY. Provide convenience functions to access these registers.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH net-next v2 1/3] net: phy: add concept of shared storage for PHYs

[Florian Fainelli]

On 5/4/2020 2:31 PM, Michael Walle wrote:
> There are packages which contain multiple PHY devices, eg. a quad PHY
> transceiver. Provide functions to allocate and free shared storage.
> 
> Usually, a quad PHY contains global registers, which don't belong to any
> PHY. Provide convenience functions to access these registers.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH net-next v2 2/3] net: phy: bcm54140: use phy_package_shared

[Florian Fainelli]

On 5/4/2020 2:31 PM, Michael Walle wrote:
> Use the new phy_package_shared common storage to ease the package
> initialization and to access the global registers.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH net-next v2 3/3] net: phy: mscc: use phy_package_shared

[Florian Fainelli]

On 5/4/2020 2:31 PM, Michael Walle wrote:
> Use the new phy_package_shared common storage to ease the package
> initialization and to access the global registers.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>
> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH net-next v2 3/3] net: phy: mscc: use phy_package_shared

[Antoine Tenart]

Hello Michael,

Quoting Michael Walle (2020-05-04 23:31:36)
> 
> diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c
> index 5391acdece05..a505286b2195 100644
> --- a/drivers/net/phy/mscc/mscc_main.c
> +++ b/drivers/net/phy/mscc/mscc_main.c
> -static bool vsc8584_is_pkg_init(struct phy_device *phydev, bool reversed)
> +static void vsc8584_get_base_addr(struct phy_device *phydev)
>  {
> -       struct mii_bus *bus = phydev->mdio.bus;
> -       struct vsc8531_private *vsc8531;
> -       struct phy_device *phy;
> -       int i, addr;
> -
> -       /* VSC8584 is a Quad PHY */
> -       for (i = 0; i < 4; i++) {
> -               vsc8531 = phydev->priv;
> -
> -               if (reversed)
> -                       addr = vsc8531->base_addr - i;
> -               else
> -                       addr = vsc8531->base_addr + i;
> -
> -               phy = mdiobus_get_phy(bus, addr);
> -               if (!phy)
> -                       continue;
> +       struct vsc8531_private *vsc8531 = phydev->priv;
> +       u16 val, addr;
>  
> -               if ((phy->phy_id & phydev->drv->phy_id_mask) !=
> -                   (phydev->drv->phy_id & phydev->drv->phy_id_mask))
> -                       continue;
> +       mutex_lock(&phydev->mdio.bus->mdio_lock);
> +       __phy_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED);
>  
> -               vsc8531 = phy->priv;
> +       addr = __phy_read(phydev, MSCC_PHY_EXT_PHY_CNTL_4);
> +       addr >>= PHY_CNTL_4_ADDR_POS;
>  
> -               if (vsc8531 && vsc8531->pkg_init)
> -                       return true;
> -       }
> +       val = __phy_read(phydev, MSCC_PHY_ACTIPHY_CNTL);

You should restore the page to MSCC_PHY_PAGE_STANDARD here.

> +       mutex_unlock(&phydev->mdio.bus->mdio_lock);
>  
> -       return false;
> +       if (val & PHY_ADDR_REVERSED)
> +               vsc8531->base_addr = phydev->mdio.addr + addr;
> +       else
> +               vsc8531->base_addr = phydev->mdio.addr - addr;
>  }

Thanks for the series!
Antoine

-- 
Antoine Ténart, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com