From: Finn Thain <fthain@telegraphics.com.au>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Joshua Thompson <funaho@jurai.org>,
linux-m68k@lists.linux-m68k.org, linuxppc-dev@lists.ozlabs.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 1/8] macintosh/adb-iop: Remove dead and redundant code
Date: Sun, 31 May 2020 09:17:03 +1000 [thread overview]
Message-ID: <7720ffb559c334504e16b24d9c2f3b8973d2d674.1590880623.git.fthain@telegraphics.com.au> (raw)
In-Reply-To: <cover.1590880623.git.fthain@telegraphics.com.au>
Cc: Joshua Thompson <funaho@jurai.org>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
---
drivers/macintosh/adb-iop.c | 29 -----------------------------
1 file changed, 29 deletions(-)
diff --git a/drivers/macintosh/adb-iop.c b/drivers/macintosh/adb-iop.c
index fca31640e3ef..ce28ff40fb9c 100644
--- a/drivers/macintosh/adb-iop.c
+++ b/drivers/macintosh/adb-iop.c
@@ -18,24 +18,16 @@
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/init.h>
-#include <linux/proc_fs.h>
#include <asm/macintosh.h>
#include <asm/macints.h>
#include <asm/mac_iop.h>
-#include <asm/mac_oss.h>
#include <asm/adb_iop.h>
#include <linux/adb.h>
-/*#define DEBUG_ADB_IOP*/
-
static struct adb_request *current_req;
static struct adb_request *last_req;
-#if 0
-static unsigned char reply_buff[16];
-static unsigned char *reply_ptr;
-#endif
static enum adb_iop_state {
idle,
@@ -104,22 +96,11 @@ static void adb_iop_listen(struct iop_msg *msg)
struct adb_iopmsg *amsg = (struct adb_iopmsg *)msg->message;
struct adb_request *req;
unsigned long flags;
-#ifdef DEBUG_ADB_IOP
- int i;
-#endif
local_irq_save(flags);
req = current_req;
-#ifdef DEBUG_ADB_IOP
- printk("adb_iop_listen %p: rcvd packet, %d bytes: %02X %02X", req,
- (uint)amsg->count + 2, (uint)amsg->flags, (uint)amsg->cmd);
- for (i = 0; i < amsg->count; i++)
- printk(" %02X", (uint)amsg->data[i]);
- printk("\n");
-#endif
-
/* Handle a timeout. Timeout packets seem to occur even after */
/* we've gotten a valid reply to a TALK, so I'm assuming that */
/* a "timeout" is actually more like an "end-of-data" signal. */
@@ -163,9 +144,6 @@ static void adb_iop_start(void)
unsigned long flags;
struct adb_request *req;
struct adb_iopmsg amsg;
-#ifdef DEBUG_ADB_IOP
- int i;
-#endif
/* get the packet to send */
req = current_req;
@@ -174,13 +152,6 @@ static void adb_iop_start(void)
local_irq_save(flags);
-#ifdef DEBUG_ADB_IOP
- printk("adb_iop_start %p: sending packet, %d bytes:", req, req->nbytes);
- for (i = 0; i < req->nbytes; i++)
- printk(" %02X", (uint)req->data[i]);
- printk("\n");
-#endif
-
/* The IOP takes MacII-style packets, so */
/* strip the initial ADB_PACKET byte. */
--
2.26.2
next prev parent reply other threads:[~2020-05-30 23:20 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-30 23:17 [PATCH 0/8] Mac ADB IOP driver fixes Finn Thain
2020-05-30 23:17 ` [PATCH 2/8] macintosh/adb-iop: Correct comment text Finn Thain
2020-05-30 23:17 ` [PATCH 7/8] macintosh/adb-iop: Implement sending -> idle state transition Finn Thain
2020-05-30 23:17 ` [PATCH 6/8] macintosh/adb-iop: Implement idle -> sending " Finn Thain
2020-05-30 23:17 ` [PATCH 8/8] macintosh/adb-iop: Implement SRQ autopolling Finn Thain
2020-05-31 8:38 ` Geert Uytterhoeven
2020-06-01 0:14 ` Finn Thain
2020-06-01 9:12 ` Geert Uytterhoeven
2020-06-01 23:49 ` Finn Thain
2020-05-30 23:17 ` [PATCH 3/8] macintosh/adb-iop: Adopt bus reset algorithm from via-macii driver Finn Thain
2020-05-30 23:17 ` [PATCH 4/8] macintosh/adb-iop: Access current_req and adb_iop_state when inside lock Finn Thain
2020-05-30 23:17 ` Finn Thain [this message]
2020-05-30 23:17 ` [PATCH 5/8] macintosh/adb-iop: Resolve static checker warnings Finn Thain
2020-07-27 7:26 ` [PATCH 0/8] Mac ADB IOP driver fixes Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7720ffb559c334504e16b24d9c2f3b8973d2d674.1590880623.git.fthain@telegraphics.com.au \
--to=fthain@telegraphics.com.au \
--cc=benh@kernel.crashing.org \
--cc=funaho@jurai.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).