From: Shengjiu Wang <shengjiu.wang@nxp.com>
To: timur@kernel.org, nicoleotsuka@gmail.com, Xiubo.Lee@gmail.com,
festevam@gmail.com, broonie@kernel.org, perex@perex.cz,
tiwai@suse.com, alsa-devel@alsa-project.org, lgirdwood@gmail.com,
robh+dt@kernel.org, devicetree@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 2/2] ASoC: fsl_spdif: Add support for imx6sx platform
Date: Wed, 17 Jun 2020 14:58:01 +0800 [thread overview]
Message-ID: <7a343edd5f8487abad248a0b862f45fd95067751.1592376770.git.shengjiu.wang@nxp.com> (raw)
In-Reply-To: <feda3bb02296455d43aeebb7575918d9b28e1a3f.1592376770.git.shengjiu.wang@nxp.com>
In-Reply-To: <feda3bb02296455d43aeebb7575918d9b28e1a3f.1592376770.git.shengjiu.wang@nxp.com>
The one difference on imx6sx platform is that the root clock
is shared with ASRC module, so we add a new flags
"shared_root_clock" which means the root clock is not independent,
then we will not do the clk_set_rate and clk_round_rate to avoid
impact ASRC module usage.
As add a new flags, we include the soc specific data struct.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
---
changes in v3
- refine some comments
- add Reviewed-by: Nicolin Chen
changes in v2
- use shared_root_clk instead ind_root_clk.
- add fsl_spdif_can_set_clk_rate function.
sound/soc/fsl/fsl_spdif.c | 50 +++++++++++++++++++++++++++++++++++----
1 file changed, 45 insertions(+), 5 deletions(-)
diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
index 1b2e516f9162..5bc0e4729341 100644
--- a/sound/soc/fsl/fsl_spdif.c
+++ b/sound/soc/fsl/fsl_spdif.c
@@ -42,6 +42,18 @@ static u8 srpc_dpll_locked[] = { 0x0, 0x1, 0x2, 0x3, 0x4, 0xa, 0xb };
#define DEFAULT_RXCLK_SRC 1
+/**
+ * struct fsl_spdif_soc_data: soc specific data
+ *
+ * @imx: for imx platform
+ * @shared_root_clock: flag of sharing a clock source with others;
+ * so the driver shouldn't set root clock rate
+ */
+struct fsl_spdif_soc_data {
+ bool imx;
+ bool shared_root_clock;
+};
+
/*
* SPDIF control structure
* Defines channel status, subcode and Q sub
@@ -89,6 +101,7 @@ struct spdif_mixer_control {
* @dma_params_rx: DMA parameters for receive channel
*/
struct fsl_spdif_priv {
+ const struct fsl_spdif_soc_data *soc;
struct spdif_mixer_control fsl_spdif_control;
struct snd_soc_dai_driver cpu_dai_drv;
struct platform_device *pdev;
@@ -110,6 +123,27 @@ struct fsl_spdif_priv {
u32 regcache_srpc;
};
+static struct fsl_spdif_soc_data fsl_spdif_vf610 = {
+ .imx = false,
+ .shared_root_clock = false,
+};
+
+static struct fsl_spdif_soc_data fsl_spdif_imx35 = {
+ .imx = true,
+ .shared_root_clock = false,
+};
+
+static struct fsl_spdif_soc_data fsl_spdif_imx6sx = {
+ .imx = true,
+ .shared_root_clock = true,
+};
+
+/* Check if clk is a root clock that does not share clock source with others */
+static inline bool fsl_spdif_can_set_clk_rate(struct fsl_spdif_priv *spdif, int clk)
+{
+ return (clk == STC_TXCLK_SPDIF_ROOT) && !spdif->soc->shared_root_clock;
+}
+
/* DPLL locked and lock loss interrupt handler */
static void spdif_irq_dpll_lock(struct fsl_spdif_priv *spdif_priv)
{
@@ -420,8 +454,7 @@ static int spdif_set_sample_rate(struct snd_pcm_substream *substream,
sysclk_df = spdif_priv->sysclk_df[rate];
- /* Don't mess up the clocks from other modules */
- if (clk != STC_TXCLK_SPDIF_ROOT)
+ if (!fsl_spdif_can_set_clk_rate(spdif_priv, clk))
goto clk_set_bypass;
/* The S/PDIF block needs a clock of 64 * fs * txclk_df */
@@ -1186,7 +1219,7 @@ static int fsl_spdif_probe_txclk(struct fsl_spdif_priv *spdif_priv,
continue;
ret = fsl_spdif_txclk_caldiv(spdif_priv, clk, savesub, index,
- i == STC_TXCLK_SPDIF_ROOT);
+ fsl_spdif_can_set_clk_rate(spdif_priv, i));
if (savesub == ret)
continue;
@@ -1230,6 +1263,12 @@ static int fsl_spdif_probe(struct platform_device *pdev)
spdif_priv->pdev = pdev;
+ spdif_priv->soc = of_device_get_match_data(&pdev->dev);
+ if (!spdif_priv->soc) {
+ dev_err(&pdev->dev, "failed to get soc data\n");
+ return -ENODEV;
+ }
+
/* Initialize this copy of the CPU DAI driver structure */
memcpy(&spdif_priv->cpu_dai_drv, &fsl_spdif_dai, sizeof(fsl_spdif_dai));
spdif_priv->cpu_dai_drv.name = dev_name(&pdev->dev);
@@ -1359,8 +1398,9 @@ static const struct dev_pm_ops fsl_spdif_pm = {
};
static const struct of_device_id fsl_spdif_dt_ids[] = {
- { .compatible = "fsl,imx35-spdif", },
- { .compatible = "fsl,vf610-spdif", },
+ { .compatible = "fsl,imx35-spdif", .data = &fsl_spdif_imx35, },
+ { .compatible = "fsl,vf610-spdif", .data = &fsl_spdif_vf610, },
+ { .compatible = "fsl,imx6sx-spdif", .data = &fsl_spdif_imx6sx, },
{}
};
MODULE_DEVICE_TABLE(of, fsl_spdif_dt_ids);
--
2.21.0
next prev parent reply other threads:[~2020-06-17 7:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-17 6:58 [PATCH v3 1/2] ASoC: bindings: fsl_spdif: Add new compatible string for imx6sx Shengjiu Wang
2020-06-17 6:58 ` Shengjiu Wang [this message]
2020-06-17 13:30 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7a343edd5f8487abad248a0b862f45fd95067751.1592376770.git.shengjiu.wang@nxp.com \
--to=shengjiu.wang@nxp.com \
--cc=Xiubo.Lee@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=nicoleotsuka@gmail.com \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=timur@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).