linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Heiner Kallweit <hkallweit1@gmail.com>
To: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>,
	Florian Fainelli <f.fainelli@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [RFC PATCH net v2] net: phy: Fix the issue that netif always links up after resuming
Date: Mon, 3 Dec 2018 08:20:54 +0100	[thread overview]
Message-ID: <7b8b2a82-d997-9dcd-8e3e-39ed80293e57@gmail.com> (raw)
In-Reply-To: <20181203133512.57D3.4A936039@socionext.com>

On 03.12.2018 05:35, Kunihiko Hayashi wrote:
> Hi Florian Heiner,
> 
> On Fri, 30 Nov 2018 19:47:37 +0100 <hkallweit1@gmail.com> wrote:
> 
>> On 30.11.2018 18:46, Florian Fainelli wrote:
>>>
>>>
>>> On 11/30/2018 1:25 AM, Kunihiko Hayashi wrote:
>>>> Even though the link is down before entering hibernation,
>>>> there is an issue that the network interface always links up after resuming
>>>> from hibernation.
>>>>
>>>> The phydev->state is PHY_READY before enabling the network interface, so
>>>> the link is down. After resuming from hibernation, the phydev->state is
>>>> forcibly set to PHY_UP in mdio_bus_phy_restore(), and the link becomes up.
>>>>
>>>> This patch adds a new convenient function to check whether the PHY is in
>>>> a started state, and expects to solve the issue by changing phydev->state
>>>> to PHY_UP and calling phy_start_machine() only when the PHY is started.
>>>>
>>>> Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
>>>> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
>>>> ---
>>>>  drivers/net/phy/phy.c        |  2 +-
>>>>  drivers/net/phy/phy_device.c |  9 +++++----
>>>>  include/linux/phy.h          | 10 ++++++++++
>>>>  3 files changed, 16 insertions(+), 5 deletions(-)
>>>>
>>>> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
>>>> index 1d73ac3..f484d03 100644
>>>> --- a/drivers/net/phy/phy.c
>>>> +++ b/drivers/net/phy/phy.c
>>>> @@ -670,7 +670,7 @@ void phy_stop_machine(struct phy_device *phydev)
>>>>  	cancel_delayed_work_sync(&phydev->state_queue);
>>>>  
>>>>  	mutex_lock(&phydev->lock);
>>>> -	if (phydev->state > PHY_UP && phydev->state != PHY_HALTED)
>>>> +	if (phy_is_started(phydev))
>>>>  		phydev->state = PHY_UP;
>>>>  	mutex_unlock(&phydev->lock);
>>>>  }
>>>> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
>>>> index ab33d17..2c39717 100644
>>>> --- a/drivers/net/phy/phy_device.c
>>>> +++ b/drivers/net/phy/phy_device.c
>>>> @@ -309,10 +309,11 @@ static int mdio_bus_phy_restore(struct device *dev)
>>>>  		return ret;
>>>>  
>>>>  	/* The PHY needs to renegotiate. */
>>>> -	phydev->link = 0;
>>>> -	phydev->state = PHY_UP;
>>>> -
>>>> -	phy_start_machine(phydev);
>>>> +	if (phy_is_started(phydev)) {
>>>> +		phydev->link = 0;
>>>> +		phydev->state = PHY_UP;
>>>> +		phy_start_machine(phydev);
>>>> +	}
>>>
>>> Don't you need some of these steps to be performed under phydev->lock
>>> being held? See comment below.
>>>
>> Yes, locking should be done. The old code sets phydev->state
>> w/o holding the lock, I'd says this was wrong.
> 
> Indeed. The phydev->state should be set with locking the mutex even here.
> 
> And it seems that setting phydev->link and calling phy_start_machine() don't
> need to hold the lock. Is it correct?
> 
Yes

>>>>  
>>>>  	return 0;
>>>>  }
>>>> diff --git a/include/linux/phy.h b/include/linux/phy.h
>>>> index 3ea87f7..c194b45 100644
>>>> --- a/include/linux/phy.h
>>>> +++ b/include/linux/phy.h
>>>> @@ -898,6 +898,16 @@ static inline bool phy_is_pseudo_fixed_link(struct phy_device *phydev)
>>>>  }
>>>>  
>>>>  /**
>>>> + * phy_is_started - Convenience function for testing whether a PHY is in
>>>> + * a started state
>>>> + * @phydev: the phy_device struct
>>>> + */
>>>> +static inline bool phy_is_started(struct phy_device *phydev)
>>>> +{
>>>
>>> An assert with the phydev->lock mutex being held here would greatly
>>> help, because otherwise this is possibly racy.
>>>
>> Have a look at __phy_resume() to see what is meant with this comment.
> 
> I see. I found that there was a lock detection in this function.
> The phy_is_started() should have the same detection, shouldn't it?
> 
Correct

> Thank you,
> 
>>>> +	return phydev->state >= PHY_UP && phydev->state != PHY_HALTED;
>>>> +}
>>>> +
>>>> +/**
>>>>   * phy_write_mmd - Convenience function for writing a register
>>>>   * on an MMD on a given PHY.
>>>>   * @phydev: The phy_device struct
>>>>
>>>
> 
> ---
> Best Regards,
> Kunihiko Hayashi
> 
Heiner
> 
> 


      reply	other threads:[~2018-12-03  7:21 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-30  9:25 [RFC PATCH net v2] net: phy: Fix the issue that netif always links up after resuming Kunihiko Hayashi
2018-11-30 17:46 ` Florian Fainelli
2018-11-30 18:47   ` Heiner Kallweit
2018-12-03  4:35     ` Kunihiko Hayashi
2018-12-03  7:20       ` Heiner Kallweit [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7b8b2a82-d997-9dcd-8e3e-39ed80293e57@gmail.com \
    --to=hkallweit1@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=hayashi.kunihiko@socionext.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).