LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Andy Lutomirski <luto@amacapital.net>
To: "H. Peter Anvin" <hpa@zytor.com>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	x86@kernel.org, Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Subject: [PATCH 1/2] x86_64,entry,xen: Do not invoke espfix64 on Xen
Date: Wed, 23 Jul 2014 08:34:11 -0700
Message-ID: <7b8f1d8ef6597cb16ae004a43c56980a7de3cf94.1406129132.git.luto@amacapital.net> (raw)
In-Reply-To: <cover.1406129131.git.luto@amacapital.net>

This moves the espfix64 logic into native_iret.  To make this work,
it gets rid of the native patch for INTERRUPT_RETURN:
INTERRUPT_RETURN on native kernels is now 'jmp native_iret'.

This changes the 16-bit SS behavior on Xen from OOPSing to leaking
some bits of the Xen hypervisor's RSP (I think).

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
---
 arch/x86/include/asm/irqflags.h     |  2 +-
 arch/x86/kernel/entry_64.S          | 28 ++++++++++------------------
 arch/x86/kernel/paravirt_patch_64.c |  2 --
 3 files changed, 11 insertions(+), 21 deletions(-)

diff --git a/arch/x86/include/asm/irqflags.h b/arch/x86/include/asm/irqflags.h
index bba3cf8..0a8b519 100644
--- a/arch/x86/include/asm/irqflags.h
+++ b/arch/x86/include/asm/irqflags.h
@@ -129,7 +129,7 @@ static inline notrace unsigned long arch_local_irq_save(void)
 
 #define PARAVIRT_ADJUST_EXCEPTION_FRAME	/*  */
 
-#define INTERRUPT_RETURN	iretq
+#define INTERRUPT_RETURN	jmp native_iret
 #define USERGS_SYSRET64				\
 	swapgs;					\
 	sysretq;
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index b25ca96..c844f08 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -830,27 +830,24 @@ restore_args:
 	RESTORE_ARGS 1,8,1
 
 irq_return:
+	INTERRUPT_RETURN
+
+ENTRY(native_iret)
 	/*
 	 * Are we returning to a stack segment from the LDT?  Note: in
 	 * 64-bit mode SS:RSP on the exception stack is always valid.
 	 */
 #ifdef CONFIG_X86_ESPFIX64
 	testb $4,(SS-RIP)(%rsp)
-	jnz irq_return_ldt
+	jnz native_irq_return_ldt
 #endif
 
-irq_return_iret:
-	INTERRUPT_RETURN
-	_ASM_EXTABLE(irq_return_iret, bad_iret)
-
-#ifdef CONFIG_PARAVIRT
-ENTRY(native_iret)
+native_irq_return_iret:
 	iretq
-	_ASM_EXTABLE(native_iret, bad_iret)
-#endif
+	_ASM_EXTABLE(native_irq_return_iret, bad_iret)
 
 #ifdef CONFIG_X86_ESPFIX64
-irq_return_ldt:
+native_irq_return_ldt:
 	pushq_cfi %rax
 	pushq_cfi %rdi
 	SWAPGS
@@ -872,7 +869,7 @@ irq_return_ldt:
 	SWAPGS
 	movq %rax,%rsp
 	popq_cfi %rax
-	jmp irq_return_iret
+	jmp native_irq_return_iret
 #endif
 
 	.section .fixup,"ax"
@@ -956,13 +953,8 @@ __do_double_fault:
 	cmpl $__KERNEL_CS,CS(%rdi)
 	jne do_double_fault
 	movq RIP(%rdi),%rax
-	cmpq $irq_return_iret,%rax
-#ifdef CONFIG_PARAVIRT
-	je 1f
-	cmpq $native_iret,%rax
-#endif
+	cmpq $native_irq_return_iret,%rax
 	jne do_double_fault		/* This shouldn't happen... */
-1:
 	movq PER_CPU_VAR(kernel_stack),%rax
 	subq $(6*8-KERNEL_STACK_OFFSET),%rax	/* Reset to original stack */
 	movq %rax,RSP(%rdi)
@@ -1428,7 +1420,7 @@ error_sti:
  */
 error_kernelspace:
 	incl %ebx
-	leaq irq_return_iret(%rip),%rcx
+	leaq native_irq_return_iret(%rip),%rcx
 	cmpq %rcx,RIP+8(%rsp)
 	je error_swapgs
 	movl %ecx,%eax	/* zero extend */
diff --git a/arch/x86/kernel/paravirt_patch_64.c b/arch/x86/kernel/paravirt_patch_64.c
index 3f08f34..a1da673 100644
--- a/arch/x86/kernel/paravirt_patch_64.c
+++ b/arch/x86/kernel/paravirt_patch_64.c
@@ -6,7 +6,6 @@ DEF_NATIVE(pv_irq_ops, irq_disable, "cli");
 DEF_NATIVE(pv_irq_ops, irq_enable, "sti");
 DEF_NATIVE(pv_irq_ops, restore_fl, "pushq %rdi; popfq");
 DEF_NATIVE(pv_irq_ops, save_fl, "pushfq; popq %rax");
-DEF_NATIVE(pv_cpu_ops, iret, "iretq");
 DEF_NATIVE(pv_mmu_ops, read_cr2, "movq %cr2, %rax");
 DEF_NATIVE(pv_mmu_ops, read_cr3, "movq %cr3, %rax");
 DEF_NATIVE(pv_mmu_ops, write_cr3, "movq %rdi, %cr3");
@@ -50,7 +49,6 @@ unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
 		PATCH_SITE(pv_irq_ops, save_fl);
 		PATCH_SITE(pv_irq_ops, irq_enable);
 		PATCH_SITE(pv_irq_ops, irq_disable);
-		PATCH_SITE(pv_cpu_ops, iret);
 		PATCH_SITE(pv_cpu_ops, irq_enable_sysexit);
 		PATCH_SITE(pv_cpu_ops, usergs_sysret32);
 		PATCH_SITE(pv_cpu_ops, usergs_sysret64);
-- 
1.9.3


  reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-23 15:34 [PATCH 0/2] x86_64: LRET to userspace Andy Lutomirski
2014-07-23 15:34 ` Andy Lutomirski [this message]
2014-07-28 22:33   ` [tip:x86/urgent] x86_64/entry/xen: Do not invoke espfix64 on Xen tip-bot for Andy Lutomirski
2014-07-29  3:39     ` Andy Lutomirski
2014-07-29  3:47       ` H. Peter Anvin
2014-07-23 15:34 ` [PATCH 2/2] x86_64,entry: Use lret to return to userspace when possible Andy Lutomirski

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7b8f1d8ef6597cb16ae004a43c56980a7de3cf94.1406129132.git.luto@amacapital.net \
    --to=luto@amacapital.net \
    --cc=bp@alien8.de \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox