* [PATCH v5 1/2] MIPS: Loongson64: Add Loongson-2K1000 reset platform driver
@ 2021-06-29 1:19 Qing Zhang
2021-06-29 1:19 ` [PATCH v5 2/2] MIPS: Loongson64: Add pm block node for Loongson-2K1000 Qing Zhang
0 siblings, 1 reply; 4+ messages in thread
From: Qing Zhang @ 2021-06-29 1:19 UTC (permalink / raw)
To: Thomas Bogendoerfer, Rob Herring, Jiaxun Yang, Huacai Chen
Cc: devicetree, linux-mips, linux-kernel
Add power management register operations to support reboot and poweroff.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
---
v5-v6:
No change
drivers/platform/mips/Kconfig | 6 +++
drivers/platform/mips/Makefile | 1 +
drivers/platform/mips/ls2k-reset.c | 60 ++++++++++++++++++++++++++++++
3 files changed, 67 insertions(+)
create mode 100644 drivers/platform/mips/ls2k-reset.c
diff --git a/drivers/platform/mips/Kconfig b/drivers/platform/mips/Kconfig
index 8ac149173c64..d421e1482395 100644
--- a/drivers/platform/mips/Kconfig
+++ b/drivers/platform/mips/Kconfig
@@ -30,4 +30,10 @@ config RS780E_ACPI
help
Loongson RS780E PCH ACPI Controller driver.
+config LS2K_RESET
+ bool "Loongson-2K1000 Reset Controller"
+ depends on MACH_LOONGSON64 || COMPILE_TEST
+ help
+ Loongson-2K1000 Reset Controller driver.
+
endif # MIPS_PLATFORM_DEVICES
diff --git a/drivers/platform/mips/Makefile b/drivers/platform/mips/Makefile
index 178149098777..4c71444e453a 100644
--- a/drivers/platform/mips/Makefile
+++ b/drivers/platform/mips/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_CPU_HWMON) += cpu_hwmon.o
obj-$(CONFIG_RS780E_ACPI) += rs780e-acpi.o
+obj-$(CONFIG_LS2K_RESET) += ls2k-reset.o
diff --git a/drivers/platform/mips/ls2k-reset.c b/drivers/platform/mips/ls2k-reset.c
new file mode 100644
index 000000000000..c5f073c82c5e
--- /dev/null
+++ b/drivers/platform/mips/ls2k-reset.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021, Qing Zhang <zhangqing@loongson.cn>
+ * Loongson-2K1000 reset support
+ */
+
+#include <linux/of_address.h>
+#include <linux/pm.h>
+#include <asm/reboot.h>
+
+static char *pm_reg_name[] = {"pm1_sts", "pm1_cnt", "rst_cnt"};
+
+static void __iomem *get_reg_byname(struct device_node *node, const char *name)
+{
+ int index = of_property_match_string(node, "reg-names", name);
+
+ if (index < 0)
+ return NULL;
+
+ return of_iomap(node, index);
+}
+
+static void ls2k_restart(char *command)
+{
+ writel(0x1, (void *)pm_reg_name[2]);
+}
+
+static void ls2k_poweroff(void)
+{
+ /* Clear */
+ writel((readl((void *)pm_reg_name[0]) & 0xffffffff), (void *)pm_reg_name[0]);
+ /* Sleep Enable | Soft Off*/
+ writel(GENMASK(12, 10)|BIT(13), (void *)pm_reg_name[1]);
+}
+
+static int ls2k_reset_init(void)
+{
+ struct device_node *np;
+ int i;
+
+ np = of_find_node_by_type(NULL, "power management");
+ if (!np) {
+ pr_info("Failed to get PM node\n");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < sizeof(pm_reg_name)/sizeof(char *); i++) {
+ pm_reg_name[i] = get_reg_byname(np, pm_reg_name[i]);
+ if (!pm_reg_name[i])
+ iounmap(pm_reg_name[i]);
+ }
+
+ _machine_restart = ls2k_restart;
+ pm_power_off = ls2k_poweroff;
+
+ of_node_put(np);
+ return 0;
+}
+
+arch_initcall(ls2k_reset_init);
--
2.31.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v5 2/2] MIPS: Loongson64: Add pm block node for Loongson-2K1000
2021-06-29 1:19 [PATCH v5 1/2] MIPS: Loongson64: Add Loongson-2K1000 reset platform driver Qing Zhang
@ 2021-06-29 1:19 ` Qing Zhang
2021-06-29 3:16 ` Jiaxun Yang
2021-06-29 17:20 ` Sergei Shtylyov
0 siblings, 2 replies; 4+ messages in thread
From: Qing Zhang @ 2021-06-29 1:19 UTC (permalink / raw)
To: Thomas Bogendoerfer, Rob Herring, Jiaxun Yang, Huacai Chen
Cc: devicetree, linux-mips, linux-kernel
The module is now supported, enable it.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
---
v4-v5:
add missing spaces
arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
index 569e814def83..38bf14f00694 100644
--- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
@@ -101,6 +101,16 @@ uart0: serial@1fe00000 {
no-loopback-test;
};
+ pm: power-controller {
+ device_type = "power management";
+ compatible = "loongson, reset-controller";
+
+ reg = <0 0x1fe0700c 0 0x8>,
+ <0 0x1fe07014 0 0x8>,
+ <0 0x1fe07030 0 0x8>;
+ reg-names = "pm1_sts", "pm1_cnt", "rst_cnt";
+ };
+
pci@1a000000 {
compatible = "loongson,ls2k-pci";
device_type = "pci";
--
2.31.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH v5 2/2] MIPS: Loongson64: Add pm block node for Loongson-2K1000
2021-06-29 1:19 ` [PATCH v5 2/2] MIPS: Loongson64: Add pm block node for Loongson-2K1000 Qing Zhang
@ 2021-06-29 3:16 ` Jiaxun Yang
2021-06-29 17:20 ` Sergei Shtylyov
1 sibling, 0 replies; 4+ messages in thread
From: Jiaxun Yang @ 2021-06-29 3:16 UTC (permalink / raw)
To: Qing Zhang, Thomas Bogendoerfer, Rob Herring, Huacai Chen
Cc: devicetree, linux-mips, linux-kernel
在 2021/6/29 上午9:19, Qing Zhang 写道:
> The module is now supported, enable it.
>
> Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
> ---
>
> v4-v5:
> add missing spaces
>
> arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
> index 569e814def83..38bf14f00694 100644
> --- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
> +++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
> @@ -101,6 +101,16 @@ uart0: serial@1fe00000 {
> no-loopback-test;
> };
>
> + pm: power-controller {
^ power-management@1fe0700c
> + device_type = "power management";
^ Why do you need to specify device type?
> + compatible = "loongson, reset-controller";
^ why space?
I guess it should be loongson,ls2k-pm...
- Jiaxun
> +
> + reg = <0 0x1fe0700c 0 0x8>,
> + <0 0x1fe07014 0 0x8>,
> + <0 0x1fe07030 0 0x8>;
> + reg-names = "pm1_sts", "pm1_cnt", "rst_cnt";
^ I guess there is no need to specify three reg names, you can simply
tell driver 0x1fe07000
base address and calculate them on your own.
Thanks.
- Jiaxun
> + };
> +
> pci@1a000000 {
> compatible = "loongson,ls2k-pci";
> device_type = "pci";
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH v5 2/2] MIPS: Loongson64: Add pm block node for Loongson-2K1000
2021-06-29 1:19 ` [PATCH v5 2/2] MIPS: Loongson64: Add pm block node for Loongson-2K1000 Qing Zhang
2021-06-29 3:16 ` Jiaxun Yang
@ 2021-06-29 17:20 ` Sergei Shtylyov
1 sibling, 0 replies; 4+ messages in thread
From: Sergei Shtylyov @ 2021-06-29 17:20 UTC (permalink / raw)
To: Qing Zhang, Thomas Bogendoerfer, Rob Herring, Jiaxun Yang, Huacai Chen
Cc: devicetree, linux-mips, linux-kernel
On 6/29/21 4:19 AM, Qing Zhang wrote:
> The module is now supported, enable it.
>
> Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
> ---
>
> v4-v5:
> add missing spaces
>
> arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
> index 569e814def83..38bf14f00694 100644
> --- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
> +++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
> @@ -101,6 +101,16 @@ uart0: serial@1fe00000 {
> no-loopback-test;
> };
>
> + pm: power-controller {
> + device_type = "power management";
> + compatible = "loongson, reset-controller";
^
When I said te space aren't allowed, I meant this place. :-)
> +
> + reg = <0 0x1fe0700c 0 0x8>,
> + <0 0x1fe07014 0 0x8>,
> + <0 0x1fe07030 0 0x8>;
TY! :-)
[...]
MBR, Sergei
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-06-29 17:20 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-29 1:19 [PATCH v5 1/2] MIPS: Loongson64: Add Loongson-2K1000 reset platform driver Qing Zhang
2021-06-29 1:19 ` [PATCH v5 2/2] MIPS: Loongson64: Add pm block node for Loongson-2K1000 Qing Zhang
2021-06-29 3:16 ` Jiaxun Yang
2021-06-29 17:20 ` Sergei Shtylyov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).