[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.4.39 (oe-user@oe-host) (gcc version 9.2.0 (GCC)) #1 SMP PREEMPT Wed Jun 3 11:14:56 UTC 2020 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TQ TQMa6Q on MBa6x [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 160 MiB at 0x46000000 [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] Normal zone: 2048 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 262144 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 20 pages/cpu s50664 r8192 d23064 u81920 [ 0.000000] pcpu-alloc: s50664 r8192 d23064 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260096 [ 0.000000] Kernel command line: root=/dev/mmcblk1p2 ro rootwait console=ttymxc1,115200 spi_imx.dyndbg=+p consoleblank=0 cma=160M [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 850004K/1048576K available (12288K kernel code, 942K rwdata, 3656K rodata, 1024K init, 6554K bss, 34732K reserved, 163840K cma-reserved, 0K highmem) [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x20/0x2b8 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 34625 entries in 68 pages [ 0.000000] Running RCU self tests [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 errata 752271 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000040] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001637] Console: colour dummy device 80x30 [ 0.001676] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001700] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001722] ... MAX_LOCK_DEPTH: 48 [ 0.001743] ... MAX_LOCKDEP_KEYS: 8192 [ 0.001764] ... CLASSHASH_SIZE: 4096 [ 0.001786] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001807] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001828] ... CHAINHASH_SIZE: 32768 [ 0.001848] memory used by lock dependency info: 3997 kB [ 0.001869] memory used for stack traces: 2112 kB [ 0.001891] per task-struct memory footprint: 1536 bytes [ 0.001965] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.002000] pid_max: default: 32768 minimum: 301 [ 0.002538] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002588] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.005116] CPU: Testing write buffer coherency: ok [ 0.005199] CPU0: Spectre v2: using BPIALL workaround [ 0.006482] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.059670] Setting up static identity map for 0x10100000 - 0x10100060 [ 0.079540] rcu: Hierarchical SRCU implementation. [ 0.129545] smp: Bringing up secondary CPUs ... [ 0.209995] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.210010] CPU1: Spectre v2: using BPIALL workaround [ 0.289894] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.289908] CPU2: Spectre v2: using BPIALL workaround [ 0.369892] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.369907] CPU3: Spectre v2: using BPIALL workaround [ 0.370533] smp: Brought up 1 node, 4 CPUs [ 0.370565] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.370593] CPU: All CPU(s) started in SVC mode. [ 0.372563] devtmpfs: initialized [ 0.411077] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.413214] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.413275] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.421595] pinctrl core: initialized pinctrl subsystem [ 0.426328] NET: Registered protocol family 16 [ 0.433888] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.437697] cpuidle: using governor ladder [ 0.437979] CPU identified as i.MX6Q, silicon rev 1.5 [ 0.471307] vdd1p1: supplied by regulator-dummy [ 0.473459] vdd3p0: supplied by regulator-dummy [ 0.475362] vdd2p5: supplied by regulator-dummy [ 0.477218] vddarm: supplied by regulator-dummy [ 0.479284] vddpu: supplied by regulator-dummy [ 0.481213] vddsoc: supplied by regulator-dummy [ 0.520384] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.520451] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.523614] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.641569] mxs-dma 110000.dma-apbh: initialized [ 0.650195] vgaarb: loaded [ 0.651759] SCSI subsystem initialized [ 0.652513] libata version 3.00 loaded. [ 0.653576] usbcore: registered new interface driver usbfs [ 0.653839] usbcore: registered new interface driver hub [ 0.654185] usbcore: registered new device driver usb [ 0.654675] usb_phy_generic usbphynop1: usbphynop1 supply vcc not found, using dummy regulator [ 0.655594] usb_phy_generic usbphynop2: usbphynop2 supply vcc not found, using dummy regulator [ 0.662480] i2c i2c-0: IMX I2C adapter registered [ 0.663519] pps_core: LinuxPPS API ver. 1 registered [ 0.663553] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.663633] PTP clock support registered [ 0.669341] clocksource: Switched to clocksource mxc_timer1 [ 1.731456] thermal_sys: Registered thermal governor 'fair_share' [ 1.731471] thermal_sys: Registered thermal governor 'step_wise' [ 1.731511] thermal_sys: Registered thermal governor 'user_space' [ 1.732403] NET: Registered protocol family 2 [ 1.734356] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes, linear) [ 1.734496] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.734731] TCP bind hash table entries: 8192 (order: 6, 294912 bytes, linear) [ 1.735980] TCP: Hash tables configured (established 8192 bind 8192) [ 1.736595] UDP hash table entries: 512 (order: 3, 40960 bytes, linear) [ 1.736831] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes, linear) [ 1.737590] NET: Registered protocol family 1 [ 1.740117] RPC: Registered named UNIX socket transport module. [ 1.740181] RPC: Registered udp transport module. [ 1.740210] RPC: Registered tcp transport module. [ 1.740236] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.751620] PCI: CLS 0 bytes, default 64 [ 1.752717] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 1.753573] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.759505] Initialise system trusted keyrings [ 1.760259] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 1.783839] NFS: Registering the id_resolver key type [ 1.784003] Key type id_resolver registered [ 1.784071] Key type id_legacy registered [ 1.784133] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.784940] fuse: init (API version 7.31) [ 1.787110] NILFS version 2 loaded [ 1.831059] Key type asymmetric registered [ 1.831173] Asymmetric key parser 'x509' registered [ 1.831346] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.831432] io scheduler mq-deadline registered [ 1.831465] io scheduler kyber registered [ 1.839429] imx6q-pcie 1ffc000.pcie: host bridge /soc/pcie@1ffc000 ranges: [ 1.839650] imx6q-pcie 1ffc000.pcie: IO 0x01f80000..0x01f8ffff -> 0x00000000 [ 1.839837] imx6q-pcie 1ffc000.pcie: MEM 0x01000000..0x01efffff -> 0x01000000 [ 1.850946] pfuze100-regulator 0-0008: Full layer: 2, Metal layer: 1 [ 1.851908] pfuze100-regulator 0-0008: FAB: 0, FIN: 0 [ 1.851943] pfuze100-regulator 0-0008: pfuze100 found. [ 1.882760] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 66, base_baud = 5000000) is a IMX [ 2.669689] printk: console [ttymxc1] enabled [ 2.676079] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 67, base_baud = 5000000) is a IMX [ 2.686581] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 68, base_baud = 5000000) is a IMX [ 2.697034] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 69, base_baud = 5000000) is a IMX [ 2.730520] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 2.736883] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 2.743284] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 2.748990] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108 [ 2.756158] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 2.762471] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 [ 2.768608] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 2.777809] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 2.790180] imx-ipuv3 2400000.ipu: IPUv3H probed [ 2.798262] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.805012] [drm] No driver support for vblank timestamp query. [ 2.812143] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 2.820052] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 2.827960] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) [ 2.835872] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) [ 2.844823] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 2.853135] imx-ipuv3 2800000.ipu: IPUv3H probed [ 2.903242] loop: module loaded [ 2.908961] at24 0-0050: 8192 byte 24c64 EEPROM, writable, 32 bytes/write [ 2.918060] at24 0-0057: 8192 byte 24c64 EEPROM, writable, 32 bytes/write [ 2.927890] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.936036] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.944137] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.952406] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.959373] imx6q-pcie 1ffc000.pcie: Phy link never came up [ 2.960434] ahci-imx 2200000.sata: 2200000.sata supply ahci not found, using dummy regulator [ 2.969739] imx6q-pcie 1ffc000.pcie: PCI host bridge to bus 0000:00 [ 2.974757] ahci-imx 2200000.sata: 2200000.sata supply phy not found, using dummy regulator [ 2.980503] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.980527] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.989621] ahci-imx 2200000.sata: 2200000.sata supply target not found, using dummy regulator [ 2.994457] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff] [ 3.004372] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 3.009553] pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400 [ 3.016256] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 3.023358] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 3.029328] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 3.038191] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] [ 3.060649] pci 0000:00:00.0: Limiting cfg_size to 512 [ 3.064643] scsi host0: ahci-imx [ 3.066123] pci 0000:00:00.0: supports D1 [ 3.070725] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 72 [ 3.073170] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold [ 3.083689] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 3.089605] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 3.093078] PCI: bus0: Fast back to back transfers disabled [ 3.094697] libphy: Fixed MDIO Bus: probed [ 3.103260] PCI: bus1: Fast back to back transfers enabled [ 3.104606] CAN device driver interface [ 3.108844] pci 0000:00:00.0: BAR 0: assigned [mem 0x01000000-0x010fffff] [ 3.113402] flexcan 2090000.flexcan: 2090000.flexcan supply xceiver not found, using dummy regulator [ 3.119579] pci 0000:00:00.0: BAR 6: assigned [mem 0x01100000-0x0110ffff pref] [ 3.131978] flexcan 2094000.flexcan: 2094000.flexcan supply xceiver not found, using dummy regulator [ 3.136184] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 3.152528] pcieport 0000:00:00.0: PME: Signaling with IRQ 305 [ 3.158817] pps pps0: new PPS source ptp0 [ 3.160067] pcieport 0000:00:00.0: AER: enabled with IRQ 305 [ 3.171233] libphy: fec_enet_mii_bus: probed [ 3.180357] fec 2188000.ethernet eth0: registered PHC device 0 [ 3.187018] usbcore: registered new interface driver cdc_ether [ 3.193126] usbcore: registered new interface driver smsc95xx [ 3.198921] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.205600] ehci-pci: EHCI PCI platform driver [ 3.215616] imx_usb 2184000.usb: No over current polarity defined [ 3.226333] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 3.231739] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 3.269404] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 3.276501] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 3.284966] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.292293] usb usb1: Product: EHCI Host Controller [ 3.297205] usb usb1: Manufacturer: Linux 5.4.39 ehci_hcd [ 3.302693] usb usb1: SerialNumber: ci_hdrc.0 [ 3.310269] hub 1-0:1.0: USB hub found [ 3.314340] hub 1-0:1.0: 1 port detected [ 3.322494] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 3.335438] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 3.340496] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 3.379392] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 3.385909] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 3.394313] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.401640] usb usb2: Product: EHCI Host Controller [ 3.406552] usb usb2: Manufacturer: Linux 5.4.39 ehci_hcd [ 3.411856] ata1: SATA link down (SStatus 0 SControl 300) [ 3.412039] usb usb2: SerialNumber: ci_hdrc.1 [ 3.417608] ahci-imx 2200000.sata: no device found, disabling link. [ 3.423741] hub 2-0:1.0: USB hub found [ 3.428150] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 3.434978] hub 2-0:1.0: 1 port detected [ 3.447810] mousedev: PS/2 mouse device common for all mice [ 3.462702] rtc-ds1307 0-0068: registered as rtc0 [ 3.469592] i2c /dev entries driver [ 3.474598] IR NEC protocol handler initialized [ 3.479392] IR RC5(x/sz) protocol handler initialized [ 3.484480] IR RC6 protocol handler initialized [ 3.489042] IR JVC protocol handler initialized [ 3.493679] IR Sony protocol handler initialized [ 3.498329] IR SANYO protocol handler initialized [ 3.503123] IR Sharp protocol handler initialized [ 3.507859] IR MCE Keyboard/mouse protocol handler initialized [ 3.513792] IR XMP protocol handler initialized [ 3.525088] lm75 0-0048: hwmon0: sensor 'lm75' [ 3.532050] lm75 0-0049: hwmon1: sensor 'lm75' [ 3.541609] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 3.550983] sdhci: Secure Digital Host Controller Interface driver [ 3.557200] sdhci: Copyright(c) Pierre Ossman [ 3.561645] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.569245] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 3.574584] sdhci-esdhc-imx 2194000.usdhc: Got WP GPIO [ 3.615109] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 3.663861] mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 3.675749] mmc1: new high speed SD card at address 1234 [ 3.684804] ledtrig-cpu: registered to indicate activity on CPUs [ 3.686753] mmcblk1: mmc1:1234 SA02G 1.84 GiB [ 3.695954] caam 2100000.caam: Entropy delay = 3200 [ 3.726346] mmcblk1: p1 p2 [ 3.759484] mmc0: new DDR MMC card at address 0001 [ 3.761722] caam 2100000.caam: Instantiated RNG4 SH0 [ 3.766564] mmcblk0: mmc0:0001 MMC04G 3.52 GiB [ 3.774965] mmcblk0boot0: mmc0:0001 MMC04G partition 1 16.0 MiB [ 3.782020] mmcblk0boot1: mmc0:0001 MMC04G partition 2 16.0 MiB [ 3.788801] mmcblk0rpmb: mmc0:0001 MMC04G partition 3 128 KiB, chardev (248:0) [ 3.809508] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 3.822488] caam 2100000.caam: Instantiated RNG4 SH1 [ 3.827505] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4) [ 3.834033] caam 2100000.caam: job rings = 2, qi = 0 [ 3.893947] caam algorithms registered in /proc/crypto [ 3.914486] caam_jr 2101000.jr0: registering rng-caam [ 3.921677] hidraw: raw HID events driver (C) Jiri Kosina [ 3.932331] NET: Registered protocol family 10 [ 3.951379] Segment Routing with IPv6 [ 3.955215] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.964456] NET: Registered protocol family 17 [ 3.968981] can: controller area network core (rev 20170425 abi 9) [ 3.975525] NET: Registered protocol family 29 [ 3.980171] can: raw protocol (rev 20170425) [ 3.984577] can: broadcast manager protocol (rev 20170425 t) [ 3.990353] can: netlink gateway (rev 20190810) max_hops=1 [ 3.996508] Key type dns_resolver registered [ 4.014442] Registering SWP/SWPB emulation handler [ 4.020962] Loading compiled-in X.509 certificates [ 4.027971] Key type ._fscrypt registered [ 4.033037] Key type .fscrypt registered [ 4.041073] usb 2-1: New USB device found, idVendor=0424, idProduct=2517, bcdDevice= 0.02 [ 4.049486] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.059458] hub 2-1:1.0: USB hub found [ 4.063530] hub 2-1:1.0: 7 ports detected [ 4.190411] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 4.192458] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 4.196045] imx_thermal tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 4.207779] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 4.209719] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 4.211635] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 4.213461] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 4.217231] random: fast init done [ 4.221458] rtc-ds1307 0-0068: setting system clock to 2000-01-01T00:01:44 UTC (946684904) [ 4.230839] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.251771] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.259615] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.268548] cfg80211: failed to load regulatory.db [ 4.299097] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 4.306662] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 4.399421] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ 4.581061] usb 2-1.1: New USB device found, idVendor=0424, idProduct=9e00, bcdDevice= 3.00 [ 4.589791] usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.601185] smsc95xx v1.0.6 [ 4.742162] smsc95xx 2-1.1:1.0 eth1: register 'smsc95xx' at usb-ci_hdrc.1-1.1, smsc95xx USB 2.0 Ethernet, 76:e5:42:55:c2:31 [ 4.758029] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 4.762043] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 5.707941] EXT4-fs (mmcblk1p2): recovery complete [ 5.833929] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.842879] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 5.855145] devtmpfs: mounted [ 5.880843] Freeing unused kernel memory: 1024K [ 5.886304] Run /sbin/init as init process [ 6.439183] systemd[1]: System time before build time, advancing clock. [ 6.534977] systemd[1]: systemd 243.2+ running in system mode. (-PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 6.561863] systemd[1]: Detected architecture arm. [ 6.633882] systemd[1]: Set hostname to . [ 7.484040] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket \xe2\x86\x92 /run/dbus/system_bus_socket; please update the unit file accordingly. [ 7.850932] systemd[1]: /lib/systemd/system/rpcbind.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/rpcbind.sock \xe2\x86\x92 /run/rpcbind.sock; please update the unit file accordingly. [ 7.899201] random: systemd: uninitialized urandom read (16 bytes read) [ 7.910873] systemd[1]: Created slice system-getty.slice. [ 7.950702] random: systemd: uninitialized urandom read (16 bytes read) [ 7.961539] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.000090] random: systemd: uninitialized urandom read (16 bytes read) [ 8.010535] systemd[1]: Created slice User and Session Slice. [ 8.052505] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 8.092382] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.977008] random: crng init done [ 8.980558] random: 7 urandom warning(s) missed due to ratelimiting [ 9.504982] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) [ 9.517861] ext4 filesystem being remounted at / supports timestamps until 2038 (0x7fffffff) [ 9.955588] systemd[296]: systemd-udevd.service: ProtectHostname=yes is configured, but the kernel does not support UTS namespaces, ignoring namespace setup. [ 10.490241] systemd-journald[278]: Received client request to flush runtime journal. [ 12.246258] input: gpio-beeper as /devices/soc0/gpio-beeper/input/input0 [ 12.257435] input: gpio-buttons as /devices/soc0/gpio-buttons/input/input1 [ 12.295253] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 12.297356] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 12.306997] mc: Linux media interface: v0.10 [ 12.326806] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 12.330068] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 12.425369] videodev: Linux video capture interface: v2.00 [ 12.575588] imx_media_common: module is from the staging directory, the quality is unknown, you have been warned. [ 12.590078] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 12.594493] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 12.632029] imx6_media: module is from the staging directory, the quality is unknown, you have been warned. [ 12.669711] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 12.671959] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 12.828772] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 12.856939] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 12.859008] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 12.904014] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 12.906008] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 12.909950] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 12.917798] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 [ 13.001771] coda 2040000.vpu: Using fallback firmware vpu/vpu_fw_imx6q.bin [ 13.254639] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 13.256768] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 13.259092] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 13.561498] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 13.562322] Micrel KSZ9031 Gigabit PHY 2188000.ethernet-1:03: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet-1:03, irq=104) [ 13.572649] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 13.585755] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 13.587007] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 13.620981] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video0 [ 13.654748] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video1 [ 13.713210] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video2 [ 13.731003] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0 [ 13.732313] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 13.736105] imx-media: ipu1_csi0:1 -> ipu1_vdic:0 [ 13.736492] coda 2040000.vpu: Firmware code revision: 570363 [ 13.738275] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 13.740542] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 13.779426] coda 2040000.vpu: Initialized CODA960. [ 13.779569] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0 [ 13.784278] coda 2040000.vpu: Firmware version: 3.1.1 [ 13.789235] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0 [ 13.821066] coda 2040000.vpu: encoder registered as video3 [ 13.839704] coda 2040000.vpu: decoder registered as video4 [ 13.869408] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0 [ 13.874770] imx-media: subdev ipu1_csi0 bound [ 13.908819] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5 [ 13.915439] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0 [ 13.934020] imx-media: ipu1_csi1:1 -> ipu1_vdic:0 [ 13.969412] imx-media: subdev ipu1_csi1 bound [ 13.980431] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video6 [ 14.009598] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video7 [ 14.039600] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video8 [ 14.046609] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0 [ 14.068880] imx-media: ipu2_csi0:1 -> ipu2_vdic:0 [ 14.089544] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0 [ 14.094513] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0 [ 14.119717] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0 [ 14.125002] imx-media: subdev ipu2_csi0 bound [ 14.161085] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video9 [ 14.167331] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0 [ 14.185161] imx-media: ipu2_csi1:1 -> ipu2_vdic:0 [ 14.206001] imx-media: subdev ipu2_csi1 bound [ 14.430499] spi spi0.0: spi_imx_setup: mode 0, 8 bpw, 50000000 hz [ 14.433744] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.438794] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.439074] spi-nor spi0.0: n25q128a13 [ 14.456688] spi-nor spi0.0: spi_nor_info_init_params: 03 [ 14.483944] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.484980] imx-sdma 20ec000.sdma: loaded firmware 3.5 [ 14.509935] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.510436] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.510535] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.510700] spi-nor spi0.0: Header: 53 [ 14.514506] spi-nor spi0.0: Header: 46 [ 14.518310] spi-nor spi0.0: Header: 44 [ 14.549558] spi-nor spi0.0: Header: 50 [ 14.553372] spi-nor spi0.0: Header: 05 [ 14.557161] spi-nor spi0.0: Header: 01 [ 14.575109] spi-nor spi0.0: Header: 01 [ 14.589472] spi-nor spi0.0: Header: ff [ 14.593459] spi-nor spi0.0: Header: 00 [ 14.597269] spi-nor spi0.0: Header: 05 [ 14.601153] spi-nor spi0.0: Header: 01 [ 14.604972] spi-nor spi0.0: Header: 10 [ 14.608791] spi-nor spi0.0: Header: 30 [ 14.679359] spi-nor spi0.0: Header: 00 [ 14.683279] spi-nor spi0.0: Header: 00 [ 14.687066] spi-nor spi0.0: Header: ff [ 14.710045] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.710235] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.710330] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.710418] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.710557] spi-nor spi0.0: bfpt addr=30 len=40 [ 14.715233] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.715336] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.715425] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.715512] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.716167] spi-nor spi0.0: DMA transfer: 64 [ 14.716864] spi-nor spi0.0: bfpt: e5 [ 14.722770] spi-nor spi0.0: bfpt: 20 [ 14.727480] spi-nor spi0.0: bfpt: f1 [ 14.749386] spi-nor spi0.0: bfpt: ff [ 14.753001] spi-nor spi0.0: bfpt: ff [ 14.756614] spi-nor spi0.0: bfpt: ff [ 14.779416] spi-nor spi0.0: bfpt: ff [ 14.783137] spi-nor spi0.0: bfpt: 07 [ 14.786752] spi-nor spi0.0: bfpt: 29 [ 14.790452] spi-nor spi0.0: bfpt: eb [ 14.794066] spi-nor spi0.0: bfpt: 27 [ 14.797734] spi-nor spi0.0: bfpt: 6b [ 14.797763] spi-nor spi0.0: bfpt: 27 [ 14.797779] spi-nor spi0.0: bfpt: 3b [ 14.797794] spi-nor spi0.0: bfpt: 27 [ 14.797808] spi-nor spi0.0: bfpt: bb [ 14.797823] spi-nor spi0.0: bfpt: ff [ 14.797838] spi-nor spi0.0: bfpt: ff [ 14.797851] spi-nor spi0.0: bfpt: ff [ 14.797865] spi-nor spi0.0: bfpt: ff [ 14.797879] spi-nor spi0.0: bfpt: ff [ 14.797893] spi-nor spi0.0: bfpt: ff [ 14.797907] spi-nor spi0.0: bfpt: 27 [ 14.797921] spi-nor spi0.0: bfpt: bb [ 14.797935] spi-nor spi0.0: bfpt: ff [ 14.797949] spi-nor spi0.0: bfpt: ff [ 14.797963] spi-nor spi0.0: bfpt: 29 [ 14.797976] spi-nor spi0.0: bfpt: eb [ 14.797990] spi-nor spi0.0: bfpt: 0c [ 14.798004] spi-nor spi0.0: bfpt: 20 [ 14.798018] spi-nor spi0.0: bfpt: 10 [ 14.798032] spi-nor spi0.0: bfpt: d8 [ 14.798046] spi-nor spi0.0: bfpt: 00 [ 14.798060] spi-nor spi0.0: bfpt: 00 [ 14.798074] spi-nor spi0.0: bfpt: 00 [ 14.798088] spi-nor spi0.0: bfpt: 00 [ 14.798102] spi-nor spi0.0: bfpt: 35 [ 14.798116] spi-nor spi0.0: bfpt: 8a [ 14.798129] spi-nor spi0.0: bfpt: 01 [ 14.798144] spi-nor spi0.0: bfpt: 00 [ 14.798157] spi-nor spi0.0: bfpt: 82 [ 14.798171] spi-nor spi0.0: bfpt: a3 [ 14.798185] spi-nor spi0.0: bfpt: 03 [ 14.798199] spi-nor spi0.0: bfpt: cb [ 14.798213] spi-nor spi0.0: bfpt: ac [ 14.798226] spi-nor spi0.0: bfpt: c1 [ 14.798240] spi-nor spi0.0: bfpt: 04 [ 14.798254] spi-nor spi0.0: bfpt: 2e [ 14.798267] spi-nor spi0.0: bfpt: 7a [ 14.798281] spi-nor spi0.0: bfpt: 75 [ 14.798295] spi-nor spi0.0: bfpt: 7a [ 14.798309] spi-nor spi0.0: bfpt: 75 [ 14.798323] spi-nor spi0.0: bfpt: fb [ 14.798336] spi-nor spi0.0: bfpt: 00 [ 14.798350] spi-nor spi0.0: bfpt: 00 [ 14.798364] spi-nor spi0.0: bfpt: 80 [ 14.798377] spi-nor spi0.0: bfpt: 08 [ 14.798391] spi-nor spi0.0: bfpt: 0f [ 14.798405] spi-nor spi0.0: bfpt: 82 [ 14.798419] spi-nor spi0.0: bfpt: ff [ 14.798432] spi-nor spi0.0: bfpt: 81 [ 14.798447] spi-nor spi0.0: bfpt: 3d [ 14.798460] spi-nor spi0.0: bfpt: 00 [ 14.798474] spi-nor spi0.0: bfpt: 00 [ 14.798492] spi-nor spi0.0: spi_nor_parse_bfpt: 03 [ 14.798510] spi-nor spi0.0: spi_nor_parse_bfpt: 0c [ 14.798527] spi-nor spi0.0: param headers: 03 [ 14.798541] spi-nor spi0.0: param headers: 00 [ 14.798556] spi-nor spi0.0: param headers: 01 [ 14.798570] spi-nor spi0.0: param headers: 02 [ 14.798584] spi-nor spi0.0: param headers: 00 [ 14.798597] spi-nor spi0.0: param headers: 01 [ 14.798611] spi-nor spi0.0: param headers: 00 [ 14.798625] spi-nor spi0.0: param headers: ff [ 14.798665] spi-nor spi0.0: has uniform erase [ 14.798681] spi-nor spi0.0: spi_nor_select_erase: 08 [ 14.798700] spi-nor spi0.0: n25q128a13 (16384 Kbytes) [ 14.838235] spi spi0.1: spi_imx_setup: mode 0, 8 bpw, 1000000 hz [ 14.870741] spi_imx 2008000.spi: probed [ 14.899712] spi spi4.0: spi_imx_setup: mode 0, 8 bpw, 1000000 hz [ 14.910546] spi_imx 2018000.spi: probed [ 14.911988] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 15.139628] imx-tlv320aic32x4 sound: tlv320aic32x4-hifi <-> 2028000.ssi mapping ok [ 15.527854] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready [ 16.570506] IPv6: ADDRCONF(NETDEV_CHANGE): can1: link becomes ready [ 17.318990] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 17.326952] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready