From: Maxime Ripard <maxime@cerno.tech>
To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org,
linux-rpi-kernel@lists.infradead.org,
bcm-kernel-feedback-list@broadcom.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
Tim Gover <tim.gover@raspberrypi.com>,
Phil Elwell <phil@raspberrypi.com>,
Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH v4 55/78] drm/vc4: hdmi: Add a CSC setup callback
Date: Wed, 8 Jul 2020 19:42:03 +0200 [thread overview]
Message-ID: <7e00240a06b54e2ee7175a892310914d7f565426.1594230107.git-series.maxime@cerno.tech> (raw)
In-Reply-To: <cover.7a1aa1784976093af26cb31fd283cf5b3ed568bb.1594230107.git-series.maxime@cerno.tech>
Similarly to the previous patches, the CSC setup is slightly different in
the BCM2711 than in the previous generations. Let's add a callback for it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 142 +++++++++++++++++++---------------
drivers/gpu/drm/vc4/vc4_hdmi.h | 7 ++-
2 files changed, 89 insertions(+), 60 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 19897d6525ac..a50220bfd5dd 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -334,12 +334,44 @@ static void vc4_hdmi_encoder_disable(struct drm_encoder *encoder)
DRM_ERROR("Failed to release power domain: %d\n", ret);
}
-static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
+static void vc4_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi, bool enable)
+{
+ u32 csc_ctl;
+
+ csc_ctl = VC4_SET_FIELD(VC4_HD_CSC_CTL_ORDER_BGR,
+ VC4_HD_CSC_CTL_ORDER);
+
+ if (enable) {
+ /* CEA VICs other than #1 requre limited range RGB
+ * output unless overridden by an AVI infoframe.
+ * Apply a colorspace conversion to squash 0-255 down
+ * to 16-235. The matrix here is:
+ *
+ * [ 0 0 0.8594 16]
+ * [ 0 0.8594 0 16]
+ * [ 0.8594 0 0 16]
+ * [ 0 0 0 1]
+ */
+ csc_ctl |= VC4_HD_CSC_CTL_ENABLE;
+ csc_ctl |= VC4_HD_CSC_CTL_RGB2YCC;
+ csc_ctl |= VC4_SET_FIELD(VC4_HD_CSC_CTL_MODE_CUSTOM,
+ VC4_HD_CSC_CTL_MODE);
+
+ HDMI_WRITE(HDMI_CSC_12_11, (0x000 << 16) | 0x000);
+ HDMI_WRITE(HDMI_CSC_14_13, (0x100 << 16) | 0x6e0);
+ HDMI_WRITE(HDMI_CSC_22_21, (0x6e0 << 16) | 0x000);
+ HDMI_WRITE(HDMI_CSC_24_23, (0x100 << 16) | 0x000);
+ HDMI_WRITE(HDMI_CSC_32_31, (0x000 << 16) | 0x6e0);
+ HDMI_WRITE(HDMI_CSC_34_33, (0x100 << 16) | 0x000);
+ }
+
+ /* The RGB order applies even when CSC is disabled. */
+ HDMI_WRITE(HDMI_CSC_CTL, csc_ctl);
+}
+
+static void vc4_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
+ struct drm_display_mode *mode)
{
- struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
- struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
- struct vc4_hdmi_encoder *vc4_encoder = &vc4_hdmi->encoder;
- bool debug_dump_regs = false;
bool hsync_pos = mode->flags & DRM_MODE_FLAG_PHSYNC;
bool vsync_pos = mode->flags & DRM_MODE_FLAG_PVSYNC;
bool interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE;
@@ -357,7 +389,41 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
mode->crtc_vsync_end -
interlaced,
VC4_HDMI_VERTB_VBP));
- u32 csc_ctl;
+
+ HDMI_WRITE(HDMI_HORZA,
+ (vsync_pos ? VC4_HDMI_HORZA_VPOS : 0) |
+ (hsync_pos ? VC4_HDMI_HORZA_HPOS : 0) |
+ VC4_SET_FIELD(mode->hdisplay * pixel_rep,
+ VC4_HDMI_HORZA_HAP));
+
+ HDMI_WRITE(HDMI_HORZB,
+ VC4_SET_FIELD((mode->htotal -
+ mode->hsync_end) * pixel_rep,
+ VC4_HDMI_HORZB_HBP) |
+ VC4_SET_FIELD((mode->hsync_end -
+ mode->hsync_start) * pixel_rep,
+ VC4_HDMI_HORZB_HSP) |
+ VC4_SET_FIELD((mode->hsync_start -
+ mode->hdisplay) * pixel_rep,
+ VC4_HDMI_HORZB_HFP));
+
+ HDMI_WRITE(HDMI_VERTA0, verta);
+ HDMI_WRITE(HDMI_VERTA1, verta);
+
+ HDMI_WRITE(HDMI_VERTB0, vertb_even);
+ HDMI_WRITE(HDMI_VERTB1, vertb);
+
+ HDMI_WRITE(HDMI_VID_CTL,
+ (vsync_pos ? 0 : VC4_HD_VID_CTL_VSYNC_LOW) |
+ (hsync_pos ? 0 : VC4_HD_VID_CTL_HSYNC_LOW));
+}
+
+static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
+{
+ struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
+ struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
+ struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder);
+ bool debug_dump_regs = false;
int ret;
ret = pm_runtime_get_sync(&vc4_hdmi->pdev->dev);
@@ -401,68 +467,22 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
VC4_HDMI_SCHEDULER_CONTROL_MANUAL_FORMAT |
VC4_HDMI_SCHEDULER_CONTROL_IGNORE_VSYNC_PREDICTS);
- HDMI_WRITE(HDMI_HORZA,
- (vsync_pos ? VC4_HDMI_HORZA_VPOS : 0) |
- (hsync_pos ? VC4_HDMI_HORZA_HPOS : 0) |
- VC4_SET_FIELD(mode->hdisplay * pixel_rep,
- VC4_HDMI_HORZA_HAP));
-
- HDMI_WRITE(HDMI_HORZB,
- VC4_SET_FIELD((mode->htotal -
- mode->hsync_end) * pixel_rep,
- VC4_HDMI_HORZB_HBP) |
- VC4_SET_FIELD((mode->hsync_end -
- mode->hsync_start) * pixel_rep,
- VC4_HDMI_HORZB_HSP) |
- VC4_SET_FIELD((mode->hsync_start -
- mode->hdisplay) * pixel_rep,
- VC4_HDMI_HORZB_HFP));
-
- HDMI_WRITE(HDMI_VERTA0, verta);
- HDMI_WRITE(HDMI_VERTA1, verta);
-
- HDMI_WRITE(HDMI_VERTB0, vertb_even);
- HDMI_WRITE(HDMI_VERTB1, vertb);
-
- HDMI_WRITE(HDMI_VID_CTL,
- (vsync_pos ? 0 : VC4_HD_VID_CTL_VSYNC_LOW) |
- (hsync_pos ? 0 : VC4_HD_VID_CTL_HSYNC_LOW));
-
- csc_ctl = VC4_SET_FIELD(VC4_HD_CSC_CTL_ORDER_BGR,
- VC4_HD_CSC_CTL_ORDER);
+ if (vc4_hdmi->variant->set_timings)
+ vc4_hdmi->variant->set_timings(vc4_hdmi, mode);
if (vc4_encoder->hdmi_monitor &&
- drm_default_rgb_quant_range(mode) ==
- HDMI_QUANTIZATION_RANGE_LIMITED) {
- /* CEA VICs other than #1 requre limited range RGB
- * output unless overridden by an AVI infoframe.
- * Apply a colorspace conversion to squash 0-255 down
- * to 16-235. The matrix here is:
- *
- * [ 0 0 0.8594 16]
- * [ 0 0.8594 0 16]
- * [ 0.8594 0 0 16]
- * [ 0 0 0 1]
- */
- csc_ctl |= VC4_HD_CSC_CTL_ENABLE;
- csc_ctl |= VC4_HD_CSC_CTL_RGB2YCC;
- csc_ctl |= VC4_SET_FIELD(VC4_HD_CSC_CTL_MODE_CUSTOM,
- VC4_HD_CSC_CTL_MODE);
+ drm_default_rgb_quant_range(mode) == HDMI_QUANTIZATION_RANGE_LIMITED) {
+ if (vc4_hdmi->variant->csc_setup)
+ vc4_hdmi->variant->csc_setup(vc4_hdmi, true);
- HDMI_WRITE(HDMI_CSC_12_11, (0x000 << 16) | 0x000);
- HDMI_WRITE(HDMI_CSC_14_13, (0x100 << 16) | 0x6e0);
- HDMI_WRITE(HDMI_CSC_22_21, (0x6e0 << 16) | 0x000);
- HDMI_WRITE(HDMI_CSC_24_23, (0x100 << 16) | 0x000);
- HDMI_WRITE(HDMI_CSC_32_31, (0x000 << 16) | 0x6e0);
- HDMI_WRITE(HDMI_CSC_34_33, (0x100 << 16) | 0x000);
vc4_encoder->limited_rgb_range = true;
} else {
+ if (vc4_hdmi->variant->csc_setup)
+ vc4_hdmi->variant->csc_setup(vc4_hdmi, false);
+
vc4_encoder->limited_rgb_range = false;
}
- /* The RGB order applies even when CSC is disabled. */
- HDMI_WRITE(HDMI_CSC_CTL, csc_ctl);
-
HDMI_WRITE(HDMI_FIFO_CTL, VC4_HDMI_FIFO_CTL_MASTER_SLAVE_N);
if (debug_dump_regs) {
@@ -1431,7 +1451,9 @@ static const struct vc4_hdmi_variant bcm2835_variant = {
.num_registers = ARRAY_SIZE(vc4_hdmi_fields),
.init_resources = vc4_hdmi_init_resources,
+ .csc_setup = vc4_hdmi_csc_setup,
.reset = vc4_hdmi_reset,
+ .set_timings = vc4_hdmi_set_timings,
.phy_init = vc4_hdmi_phy_init,
.phy_disable = vc4_hdmi_phy_disable,
.phy_rng_enable = vc4_hdmi_phy_rng_enable,
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 950accbc44e4..0c32dc46d289 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -41,6 +41,13 @@ struct vc4_hdmi_variant {
/* Callback to reset the HDMI block */
void (*reset)(struct vc4_hdmi *vc4_hdmi);
+ /* Callback to enable / disable the CSC */
+ void (*csc_setup)(struct vc4_hdmi *vc4_hdmi, bool enable);
+
+ /* Callback to configure the video timings in the HDMI block */
+ void (*set_timings)(struct vc4_hdmi *vc4_hdmi,
+ struct drm_display_mode *mode);
+
/* Callback to initialize the PHY according to the mode */
void (*phy_init)(struct vc4_hdmi *vc4_hdmi,
struct drm_display_mode *mode);
--
git-series 0.9.1
next prev parent reply other threads:[~2020-07-08 17:45 UTC|newest]
Thread overview: 144+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20200709070649epcas1p13664bacc66a0f73443bf4d3e8940f933@epcas1p1.samsung.com>
2020-07-08 17:41 ` [PATCH v4 00/78] drm/vc4: Support BCM2711 Display Pipeline Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 01/78] dt-bindings: display: Add support for the BCM2711 HVS Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 02/78] drm/vc4: Add support for the BCM2711 HVS5 Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 03/78] drm/vc4: hvs: Boost the core clock during modeset Maxime Ripard
2020-09-01 11:21 ` Chanwoo Choi
2020-09-01 11:48 ` Chanwoo Choi
2020-09-02 14:48 ` Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 04/78] drm/vc4: plane: Change LBM alignment constraint on LBM Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 05/78] drm/vc4: plane: Optimize the LBM allocation size Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 06/78] drm/vc4: plane: Create more planes Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 07/78] drm/vc4: crtc: Deal with different number of pixel per clock Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 08/78] drm/vc4: crtc: Use a shared interrupt Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 09/78] drm/vc4: crtc: Move the cob allocation outside of bind Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 10/78] drm/vc4: crtc: Rename HVS channel to output Maxime Ripard
2020-07-28 9:48 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 11/78] drm/vc4: crtc: Use local chan variable Maxime Ripard
2020-07-28 9:50 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 12/78] drm/vc4: crtc: Enable and disable the PV in atomic_enable / disable Maxime Ripard
2020-07-28 9:57 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 13/78] drm/vc4: kms: Convert to for_each_new_crtc_state Maxime Ripard
2020-07-29 15:02 ` Dave Stevenson
2020-09-02 17:59 ` Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 14/78] drm/vc4: crtc: Assign output to channel automatically Maxime Ripard
2020-07-29 14:31 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 15/78] drm/vc4: crtc: Add FIFO depth to vc4_crtc_data Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 16/78] drm/vc4: crtc: Add function to compute FIFO level bits Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 17/78] drm/vc4: crtc: Rename HDMI encoder type to HDMI0 Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 18/78] drm/vc4: crtc: Add HDMI1 encoder type Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 19/78] drm/vc4: crtc: Disable color management for HVS5 Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 20/78] drm/vc4: crtc: Turn pixelvalve reset into a function Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 21/78] drm/vc4: crtc: Move PV dump to config_pv Maxime Ripard
2020-07-28 10:30 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 22/78] drm/vc4: crtc: Move HVS init and close to a function Maxime Ripard
2020-07-28 10:31 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 23/78] drm/vc4: crtc: Move the HVS gamma LUT setup to our init function Maxime Ripard
2020-07-29 14:42 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 24/78] drm/vc4: hvs: Make sure our channel is reset Maxime Ripard
2020-07-28 10:37 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 25/78] drm/vc4: crtc: Remove mode_set_nofb Maxime Ripard
2020-07-28 10:38 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 26/78] drm/vc4: crtc: Remove redundant pixelvalve reset Maxime Ripard
2020-07-28 10:39 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 27/78] drm/vc4: crtc: Move HVS channel init before the PV initialisation Maxime Ripard
2020-07-28 10:40 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 28/78] drm/vc4: encoder: Add finer-grained encoder callbacks Maxime Ripard
2020-07-28 11:25 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 29/78] drm/vc4: crtc: Add a delay after disabling the PixelValve output Maxime Ripard
2020-07-29 14:09 ` Dave Stevenson
2020-07-29 14:42 ` Maxime Ripard
2020-07-29 14:45 ` Dave Stevenson
2020-07-29 15:50 ` Stefan Wahren
2020-08-25 15:06 ` Maxime Ripard
2020-08-25 21:30 ` Stefan Wahren
2020-09-01 9:58 ` Maxime Ripard
2020-09-01 16:31 ` Stefan Wahren
2020-09-02 15:08 ` Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 30/78] drm/vc4: crtc: Clear the PixelValve FIFO on disable Maxime Ripard
2020-07-28 11:40 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 31/78] drm/vc4: crtc: Clear the PixelValve FIFO during configuration Maxime Ripard
2020-07-28 11:41 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 32/78] drm/vc4: hvs: Make the stop_channel function public Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 33/78] drm/vc4: hvs: Introduce a function to get the assigned FIFO Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 34/78] drm/vc4: crtc: Move the CRTC disable out Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 35/78] drm/vc4: drv: Disable the CRTC at boot time Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 36/78] dt-bindings: display: vc4: pv: Add BCM2711 pixel valves Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 37/78] drm/vc4: crtc: Add BCM2711 pixelvalves Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 38/78] drm/vc4: hdmi: Use debugfs private field Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 39/78] drm/vc4: hdmi: Move structure to header Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 40/78] drm/vc4: hdmi: rework connectors and encoders Maxime Ripard
2020-07-28 11:58 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 41/78] drm/vc4: hdmi: Remove DDC argument to connector_init Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 42/78] drm/vc4: hdmi: Rename hdmi to vc4_hdmi Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 43/78] drm/vc4: hdmi: Move accessors " Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 44/78] drm/vc4: hdmi: Use local vc4_hdmi directly Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 45/78] drm/vc4: hdmi: Add container_of macros for encoders and connectors Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 46/78] drm/vc4: hdmi: Pass vc4_hdmi to CEC code Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 47/78] drm/vc4: hdmi: Retrieve the vc4_hdmi at unbind using our device Maxime Ripard
2020-07-28 12:32 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 48/78] drm/vc4: hdmi: Remove vc4_dev hdmi pointer Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 49/78] drm/vc4: hdmi: Remove vc4_hdmi_connector Maxime Ripard
2020-07-08 17:41 ` [PATCH v4 50/78] drm/vc4: hdmi: Introduce resource init and variant Maxime Ripard
2020-07-28 12:37 ` Dave Stevenson
2020-07-08 17:41 ` [PATCH v4 51/78] drm/vc4: hdmi: Implement a register layout abstraction Maxime Ripard
2020-07-28 12:59 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 52/78] drm/vc4: hdmi: Add reset callback Maxime Ripard
2020-07-28 13:00 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 53/78] drm/vc4: hdmi: Add PHY init and disable function Maxime Ripard
2020-07-28 13:03 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 54/78] drm/vc4: hdmi: Add PHY RNG enable / " Maxime Ripard
2020-07-28 13:04 ` Dave Stevenson
2020-07-08 17:42 ` Maxime Ripard [this message]
2020-07-28 13:12 ` [PATCH v4 55/78] drm/vc4: hdmi: Add a CSC setup callback Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 56/78] drm/vc4: hdmi: Store the encoder type in the variant structure Maxime Ripard
2020-07-28 13:18 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 57/78] drm/vc4: hdmi: Deal with multiple debugfs files Maxime Ripard
2020-07-28 13:20 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 58/78] drm/vc4: hdmi: Move CEC init to its own function Maxime Ripard
2020-07-28 13:23 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 59/78] drm/vc4: hdmi: Add CEC support flag Maxime Ripard
2020-07-28 13:25 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 60/78] drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define Maxime Ripard
2020-07-28 13:26 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 61/78] drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid Maxime Ripard
2020-07-28 14:45 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 62/78] drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate Maxime Ripard
2020-07-28 14:56 ` Dave Stevenson
2020-09-01 4:36 ` Chanwoo Choi
2020-09-01 9:45 ` Maxime Ripard
2020-09-01 10:48 ` Chanwoo Choi
2020-07-08 17:42 ` [PATCH v4 63/78] drm/vc4: hdmi: Use clk_set_min_rate instead Maxime Ripard
2020-07-28 14:57 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 64/78] drm/vc4: hdmi: Use reg-names to retrieve the HDMI audio registers Maxime Ripard
2020-07-08 17:42 ` [PATCH v4 65/78] drm/vc4: hdmi: Reset audio infoframe on encoder_enable if previously streaming Maxime Ripard
2020-07-08 17:42 ` [PATCH v4 66/78] drm/vc4: hdmi: Set the b-frame marker to the match ALSA's default Maxime Ripard
2020-07-08 17:42 ` [PATCH v4 67/78] drm/vc4: hdmi: Add audio-related callbacks Maxime Ripard
2020-07-08 17:42 ` [PATCH v4 68/78] drm/vc4: hdmi: Deal with multiple ALSA cards Maxime Ripard
2020-07-28 15:00 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 69/78] drm/vc4: hdmi: Remove register dumps in enable Maxime Ripard
2020-07-28 15:01 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 70/78] drm/vc4: hdmi: Always recenter the HDMI FIFO Maxime Ripard
2020-07-28 15:03 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 71/78] drm/vc4: hdmi: Implement finer-grained hooks Maxime Ripard
2020-07-28 15:04 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 72/78] drm/vc4: hdmi: Do the VID_CTL configuration at once Maxime Ripard
2020-07-28 15:06 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 73/78] drm/vc4: hdmi: Switch to blank pixels when disabled Maxime Ripard
2020-07-28 15:09 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 74/78] drm/vc4: hdmi: Support the BCM2711 HDMI controllers Maxime Ripard
2020-07-28 15:21 ` Dave Stevenson
2020-07-08 17:42 ` [PATCH v4 75/78] dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings Maxime Ripard
2020-09-01 4:45 ` Chanwoo Choi
2020-09-01 9:52 ` Maxime Ripard
2020-07-08 17:42 ` [PATCH v4 76/78] dt-bindings: display: vc4: Document BCM2711 VC5 Maxime Ripard
2020-07-08 17:42 ` [PATCH v4 77/78] drm/vc4: drv: Support BCM2711 Maxime Ripard
2020-07-28 15:30 ` Dave Stevenson
2020-09-01 10:19 ` Maxime Ripard
2020-07-08 17:42 ` [PATCH v4 78/78] ARM: dts: bcm2711: Enable the display pipeline Maxime Ripard
2020-07-28 15:35 ` Dave Stevenson
2020-07-10 7:37 ` [PATCH v4 00/78] drm/vc4: Support BCM2711 Display Pipeline Jian-Hong Pan
2020-07-10 9:58 ` Stefan Wahren
2020-08-21 7:18 ` Hoegeun Kwon
2020-09-02 13:32 ` Maxime Ripard
2020-09-02 13:52 ` Maxime Ripard
2020-08-31 2:36 ` Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7e00240a06b54e2ee7175a892310914d7f565426.1594230107.git-series.maxime@cerno.tech \
--to=maxime@cerno.tech \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=eric@anholt.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=nsaenzjulienne@suse.de \
--cc=phil@raspberrypi.com \
--cc=tim.gover@raspberrypi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).