linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Kyle Tso <kyletso@google.com>,
	heikki.krogerus@linux.intel.com, gregkh@linuxfoundation.org,
	robh+dt@kernel.org
Cc: badhri@google.com, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v4 2/2] usb: typec: tcpm: Support non-PD mode
Date: Thu, 29 Jul 2021 23:31:18 -0700	[thread overview]
Message-ID: <7f36b8b7-b770-6c29-b69f-f0e8ca06ff7d@roeck-us.net> (raw)
In-Reply-To: <20210730061832.1927936-3-kyletso@google.com>

On 7/29/21 11:18 PM, Kyle Tso wrote:
> Even if the Type-C controller supports PD, it is doable to disable PD
> capabilities with the current state machine in TCPM. Without enabling RX
> in low-level drivers and with skipping the power negotiation, the port
> is eligible to be a non-PD Type-C port. Use new flags whose values are
> populated from the device tree to decide the port PD capability. Adding
> "pd-unsupported" property in device tree indicates that the port does
> not support PD. If PD is not supported, the device tree property
> "typec-power-opmode" shall be added to specify the advertised Rp value
> if the port supports SRC role.
> 
> Signed-off-by: Kyle Tso <kyletso@google.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
> changes since v3:
> - commit msg updated
> - removed unnecessary empty lines
> - re-factored the code of reading device tree properties and the error
>    handling
> - removed unnecessay variable initialization
> - modified the comments
> 
>   drivers/usb/typec/tcpm/tcpm.c | 87 +++++++++++++++++++++++++++--------
>   1 file changed, 68 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> index 5b22a1c931a9..faea1bf9dce0 100644
> --- a/drivers/usb/typec/tcpm/tcpm.c
> +++ b/drivers/usb/typec/tcpm/tcpm.c
> @@ -316,6 +316,7 @@ struct tcpm_port {
>   	struct typec_partner *partner;
>   
>   	enum typec_cc_status cc_req;
> +	enum typec_cc_status src_rp;	/* work only if pd_supported == false */
>   
>   	enum typec_cc_status cc1;
>   	enum typec_cc_status cc2;
> @@ -323,6 +324,7 @@ struct tcpm_port {
>   
>   	bool attached;
>   	bool connected;
> +	bool pd_supported;
>   	enum typec_port_type port_type;
>   
>   	/*
> @@ -815,6 +817,9 @@ static enum typec_cc_status tcpm_rp_cc(struct tcpm_port *port)
>   	int nr_pdo = port->nr_src_pdo;
>   	int i;
>   
> +	if (!port->pd_supported)
> +		return port->src_rp;
> +
>   	/*
>   	 * Search for first entry with matching voltage.
>   	 * It should report the maximum supported current.
> @@ -3568,9 +3573,11 @@ static int tcpm_src_attach(struct tcpm_port *port)
>   	if (ret < 0)
>   		return ret;
>   
> -	ret = port->tcpc->set_pd_rx(port->tcpc, true);
> -	if (ret < 0)
> -		goto out_disable_mux;
> +	if (port->pd_supported) {
> +		ret = port->tcpc->set_pd_rx(port->tcpc, true);
> +		if (ret < 0)
> +			goto out_disable_mux;
> +	}
>   
>   	/*
>   	 * USB Type-C specification, version 1.2,
> @@ -3600,7 +3607,8 @@ static int tcpm_src_attach(struct tcpm_port *port)
>   out_disable_vconn:
>   	tcpm_set_vconn(port, false);
>   out_disable_pd:
> -	port->tcpc->set_pd_rx(port->tcpc, false);
> +	if (port->pd_supported)
> +		port->tcpc->set_pd_rx(port->tcpc, false);
>   out_disable_mux:
>   	tcpm_mux_set(port, TYPEC_STATE_SAFE, USB_ROLE_NONE,
>   		     TYPEC_ORIENTATION_NONE);
> @@ -3804,6 +3812,20 @@ static enum typec_pwr_opmode tcpm_get_pwr_opmode(enum typec_cc_status cc)
>   	}
>   }
>   
> +static enum typec_cc_status tcpm_pwr_opmode_to_rp(enum typec_pwr_opmode opmode)
> +{
> +	switch (opmode) {
> +	case TYPEC_PWR_MODE_USB:
> +		return TYPEC_CC_RP_DEF;
> +	case TYPEC_PWR_MODE_1_5A:
> +		return TYPEC_CC_RP_1_5;
> +	case TYPEC_PWR_MODE_3_0A:
> +	case TYPEC_PWR_MODE_PD:
> +	default:
> +		return TYPEC_CC_RP_3_0;
> +	}
> +}
> +
>   static void run_state_machine(struct tcpm_port *port)
>   {
>   	int ret;
> @@ -3914,6 +3936,10 @@ static void run_state_machine(struct tcpm_port *port)
>   		if (port->ams == POWER_ROLE_SWAP ||
>   		    port->ams == FAST_ROLE_SWAP)
>   			tcpm_ams_finish(port);
> +		if (!port->pd_supported) {
> +			tcpm_set_state(port, SRC_READY, 0);
> +			break;
> +		}
>   		port->upcoming_state = SRC_SEND_CAPABILITIES;
>   		tcpm_ams_start(port, POWER_NEGOTIATION);
>   		break;
> @@ -4161,7 +4187,10 @@ static void run_state_machine(struct tcpm_port *port)
>   				current_lim = PD_P_SNK_STDBY_MW / 5;
>   			tcpm_set_current_limit(port, current_lim, 5000);
>   			tcpm_set_charge(port, true);
> -			tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0);
> +			if (!port->pd_supported)
> +				tcpm_set_state(port, SNK_READY, 0);
> +			else
> +				tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0);
>   			break;
>   		}
>   		/*
> @@ -4389,7 +4418,8 @@ static void run_state_machine(struct tcpm_port *port)
>   		tcpm_set_vbus(port, true);
>   		if (port->ams == HARD_RESET)
>   			tcpm_ams_finish(port);
> -		port->tcpc->set_pd_rx(port->tcpc, true);
> +		if (port->pd_supported)
> +			port->tcpc->set_pd_rx(port->tcpc, true);
>   		tcpm_set_attached_state(port, true);
>   		tcpm_set_state(port, SRC_UNATTACHED, PD_T_PS_SOURCE_ON);
>   		break;
> @@ -5898,6 +5928,7 @@ EXPORT_SYMBOL_GPL(tcpm_tcpc_reset);
>   static int tcpm_fw_get_caps(struct tcpm_port *port,
>   			    struct fwnode_handle *fwnode)
>   {
> +	const char *opmode_str;
>   	const char *cap_str;
>   	int ret;
>   	u32 mw, frs_current;
> @@ -5932,22 +5963,37 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
>   		return ret;
>   	port->typec_caps.type = ret;
>   	port->port_type = port->typec_caps.type;
> +	port->pd_supported = !fwnode_property_read_bool(fwnode, "pd-unsupported");
>   
>   	port->slow_charger_loop = fwnode_property_read_bool(fwnode, "slow-charger-loop");
>   	if (port->port_type == TYPEC_PORT_SNK)
>   		goto sink;
>   
> -	/* Get source pdos */
> -	ret = fwnode_property_count_u32(fwnode, "source-pdos");
> -	if (ret <= 0)
> -		return -EINVAL;
> +	/* Get Source PDOs for the PD port or Source Rp value for the non-PD port */
> +	if (port->pd_supported) {
> +		ret = fwnode_property_count_u32(fwnode, "source-pdos");
> +		if (ret == 0)
> +			return -EINVAL;
> +		else if (ret < 0)
> +			return ret;
>   
> -	port->nr_src_pdo = min(ret, PDO_MAX_OBJECTS);
> -	ret = fwnode_property_read_u32_array(fwnode, "source-pdos",
> -					     port->src_pdo, port->nr_src_pdo);
> -	if ((ret < 0) || tcpm_validate_caps(port, port->src_pdo,
> -					    port->nr_src_pdo))
> -		return -EINVAL;
> +		port->nr_src_pdo = min(ret, PDO_MAX_OBJECTS);
> +		ret = fwnode_property_read_u32_array(fwnode, "source-pdos",
> +						     port->src_pdo, port->nr_src_pdo);
> +		if (ret)
> +			return ret;
> +		ret = tcpm_validate_caps(port, port->src_pdo, port->nr_src_pdo);
> +		if (ret)
> +			return ret;
> +	} else {
> +		ret = fwnode_property_read_string(fwnode, "typec-power-opmode", &opmode_str);
> +		if (ret)
> +			return ret;
> +		ret = typec_find_pwr_opmode(opmode_str);
> +		if (ret < 0)
> +			return ret;
> +		port->src_rp = tcpm_pwr_opmode_to_rp(ret);
> +	}
>   
>   	if (port->port_type == TYPEC_PORT_SRC)
>   		return 0;
> @@ -5961,6 +6007,11 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
>   	if (port->typec_caps.prefer_role < 0)
>   		return -EINVAL;
>   sink:
> +	port->self_powered = fwnode_property_read_bool(fwnode, "self-powered");
> +
> +	if (!port->pd_supported)
> +		return 0;
> +
>   	/* Get sink pdos */
>   	ret = fwnode_property_count_u32(fwnode, "sink-pdos");
>   	if (ret <= 0)
> @@ -5977,9 +6028,7 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
>   		return -EINVAL;
>   	port->operating_snk_mw = mw / 1000;
>   
> -	port->self_powered = fwnode_property_read_bool(fwnode, "self-powered");
> -
> -	/* FRS can only be supported byb DRP ports */
> +	/* FRS can only be supported by DRP ports */
>   	if (port->port_type == TYPEC_PORT_DRP) {
>   		ret = fwnode_property_read_u32(fwnode, "new-source-frs-typec-current",
>   					       &frs_current);
> 


      reply	other threads:[~2021-07-30  6:31 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-30  6:18 [PATCH v4 0/2] TCPM " Kyle Tso
2021-07-30  6:18 ` [PATCH v4 1/2] dt-bindings: connector: Add pd-supported property Kyle Tso
2021-07-30  6:29   ` Guenter Roeck
2021-08-03 19:33     ` Rob Herring
2021-08-03 19:35       ` Rob Herring
2021-08-03 19:37   ` Rob Herring
2021-07-30  6:18 ` [PATCH v4 2/2] usb: typec: tcpm: Support non-PD mode Kyle Tso
2021-07-30  6:31   ` Guenter Roeck [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7f36b8b7-b770-6c29-b69f-f0e8ca06ff7d@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=badhri@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=kyletso@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH v4 2/2] usb: typec: tcpm: Support non-PD mode' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).