linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] ARM64: dts: meson-gxbb-odroidc2: Fix usb phy regulator warning
@ 2019-01-11  9:22 Anand Moon
  2019-01-11 13:40 ` Neil Armstrong
  0 siblings, 1 reply; 4+ messages in thread
From: Anand Moon @ 2019-01-11  9:22 UTC (permalink / raw)
  To: devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
  Cc: Rob Herring, Mark Rutland, Kevin Hilman, Martin Blumenstingl,
	Jerome Brunet, Neil Armstrong

Add missing vin-supply 5V regulator node on usb_phy nodes needed
to power usb bus ports. Override the dr_mode from "host" to "peripheral"
for initialization of dwc2 usb0 phy node,changes fix the below
warning for usb initialization.

[    1.203900] phy phy-c0000000.phy.0: USB ID detect failed!
[    1.208048] phy phy-c0000000.phy.0: phy poweron failed --> -22
[    1.213877] WARNING: CPU: 1 PID: 44 at drivers/regulator/core.c:2054 _regulator_put.part.11+0xf0/0xf8
[    1.222953] Modules linked in:
[    1.225976] CPU: 1 PID: 44 Comm: kworker/1:1 Not tainted 5.0.0-rc1-xc2ml #3
[    1.232872] Hardware name: Hardkernel ODROID-C2 (DT)
[    1.237794] Workqueue: events deferred_probe_work_func
[    1.242878] pstate: 80000005 (Nzcv daif -PAN -UAO)
[    1.247623] pc : _regulator_put.part.11+0xf0/0xf8
[    1.252280] lr : regulator_put+0x34/0x48
[    1.256159] sp : ffff00001176bb00
[    1.259437] x29: ffff00001176bb00 x28: 0000000000000000
[    1.264698] x27: ffff80007f31beb8 x26: ffff000010eeb7e0
[    1.269959] x25: 0000000000000000 x24: 0000000000000009
[    1.275220] x23: ffff00001176bbc8 x22: ffff80007ed9d500
[    1.280482] x21: ffff0000111bd6c8 x20: ffff80007ed9d700
[    1.285743] x19: ffff80007ed9d700 x18: 000000000000006f
[    1.291004] x17: 0000000000000000 x16: 0000000000000000
[    1.296265] x15: 0000000000000400 x14: 0000000000000400
[    1.301527] x13: ff00000000000000 x12: ffffffffffffffff
[    1.306788] x11: 0000000000000038 x10: 0000000000000040
[    1.312049] x9 : ffff0000111d58b0 x8 : ffff0000111d58a8
[    1.317310] x7 : ffff80007ed9db00 x6 : ffff80007ec21b00
[    1.322571] x5 : ffff80007f400248 x4 : ffff80007fba9b00
[    1.327833] x3 : ffff0000112d9eb8 x2 : ffff80007ec21b00
[    1.333094] x1 : 0000000000000000 x0 : 0000000000000001
[    1.338356] Call trace:
[    1.340773]  _regulator_put.part.11+0xf0/0xf8
[    1.345085]  regulator_put+0x34/0x48
[    1.348621]  regulator_bulk_free+0x30/0x50
[    1.352675]  devm_regulator_bulk_release+0x18/0x20
[    1.357421]  release_nodes+0x1b0/0x220
[    1.361127]  devres_release_all+0x34/0x50
[    1.365094]  really_probe+0xec/0x290
[    1.368630]  driver_probe_device+0x54/0xe8
[    1.372684]  __device_attach_driver+0xb8/0xe8
[    1.376997]  bus_for_each_drv+0x78/0xc8
[    1.380792]  __device_attach+0xd4/0x130
[    1.384587]  device_initial_probe+0x10/0x18
[    1.388727]  bus_probe_device+0x90/0x98
[    1.392522]  deferred_probe_work_func+0x6c/0xa0
[    1.397010]  process_one_work+0x1e0/0x318
[    1.400975]  worker_thread+0x228/0x428
[    1.404684]  kthread+0x124/0x128
[    1.407876]  ret_from_fork+0x10/0x18
[    1.411410] ---[ end trace de5fd1b262c1f56a ]---
[    1.416055] WARNING: CPU: 1 PID: 44 at drivers/regulator/core.c:2054 _regulator_put.part.11+0xf0/0xf8
[    1.425123] Modules linked in:
[    1.428144] CPU: 1 PID: 44 Comm: kworker/1:1 Tainted: G        W         5.0.0-rc1-xc2ml #3
[    1.436422] Hardware name: Hardkernel ODROID-C2 (DT)
[    1.441340] Workqueue: events deferred_probe_work_func

Fixes: 5a0803bd5ae (ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes)
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
Fix the following power issue with usb device

[  795.380156] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[  798.356073] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[  801.331999] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[  804.307919] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[  807.283844] usb 1-1.2: reset high-speed USB device number 3 using dwc2

[alarm@archl-c2m ~]$ lsusb -t
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
        |__ Port 1: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 480M
        |__ Port 2: Dev 5, If 3, Class=Audio, Driver=, 480M
        |__ Port 2: Dev 5, If 1, Class=Video, Driver=uvcvideo, 480M
        |__ Port 2: Dev 5, If 2, Class=Audio, Driver=, 480M
        |__ Port 2: Dev 5, If 0, Class=Video, Driver=uvcvideo, 480M
        |__ Port 3: Dev 3, If 0, Class=Vendor Specific Class, Driver=, 480M

Similar Fix is need for Odroid C1+ to power on the phy nodes
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 2e1cd5e3a246..b4e14ff614c4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -28,6 +28,13 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
+	p5v0: regulator-p5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
 	usb_otg_pwr: regulator-usb-pwrs {
 		compatible = "regulator-fixed";
 
@@ -36,6 +43,8 @@
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 
+		vin-supply = <&p5v0>;
+
 		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
@@ -303,6 +312,7 @@
 
 &usb0 {
 	status = "okay";
+	dr_mode = "peripheral";
 };
 
 &usb1 {
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 4+ messages in thread

* Re: [PATCH] ARM64: dts: meson-gxbb-odroidc2: Fix usb phy regulator warning
  2019-01-11  9:22 [PATCH] ARM64: dts: meson-gxbb-odroidc2: Fix usb phy regulator warning Anand Moon
@ 2019-01-11 13:40 ` Neil Armstrong
  2019-01-11 16:16   ` Anand Moon
  0 siblings, 1 reply; 4+ messages in thread
From: Neil Armstrong @ 2019-01-11 13:40 UTC (permalink / raw)
  To: Anand Moon, devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
  Cc: Rob Herring, Mark Rutland, Kevin Hilman, Martin Blumenstingl,
	Jerome Brunet

Hi Anand,

On 11/01/2019 10:22, Anand Moon wrote:
> Add missing vin-supply 5V regulator node on usb_phy nodes needed
> to power usb bus ports. Override the dr_mode from "host" to "peripheral"
> for initialization of dwc2 usb0 phy node,changes fix the below
> warning for usb initialization.

I would have switch the dr_mode to peripheral in another patch,
fix the regulator issue in this patch only.

Neil

> 
> [    1.203900] phy phy-c0000000.phy.0: USB ID detect failed!
> [    1.208048] phy phy-c0000000.phy.0: phy poweron failed --> -22
> [    1.213877] WARNING: CPU: 1 PID: 44 at drivers/regulator/core.c:2054 _regulator_put.part.11+0xf0/0xf8
> [    1.222953] Modules linked in:
> [    1.225976] CPU: 1 PID: 44 Comm: kworker/1:1 Not tainted 5.0.0-rc1-xc2ml #3
> [    1.232872] Hardware name: Hardkernel ODROID-C2 (DT)
> [    1.237794] Workqueue: events deferred_probe_work_func
> [    1.242878] pstate: 80000005 (Nzcv daif -PAN -UAO)
> [    1.247623] pc : _regulator_put.part.11+0xf0/0xf8
> [    1.252280] lr : regulator_put+0x34/0x48
> [    1.256159] sp : ffff00001176bb00
> [    1.259437] x29: ffff00001176bb00 x28: 0000000000000000
> [    1.264698] x27: ffff80007f31beb8 x26: ffff000010eeb7e0
> [    1.269959] x25: 0000000000000000 x24: 0000000000000009
> [    1.275220] x23: ffff00001176bbc8 x22: ffff80007ed9d500
> [    1.280482] x21: ffff0000111bd6c8 x20: ffff80007ed9d700
> [    1.285743] x19: ffff80007ed9d700 x18: 000000000000006f
> [    1.291004] x17: 0000000000000000 x16: 0000000000000000
> [    1.296265] x15: 0000000000000400 x14: 0000000000000400
> [    1.301527] x13: ff00000000000000 x12: ffffffffffffffff
> [    1.306788] x11: 0000000000000038 x10: 0000000000000040
> [    1.312049] x9 : ffff0000111d58b0 x8 : ffff0000111d58a8
> [    1.317310] x7 : ffff80007ed9db00 x6 : ffff80007ec21b00
> [    1.322571] x5 : ffff80007f400248 x4 : ffff80007fba9b00
> [    1.327833] x3 : ffff0000112d9eb8 x2 : ffff80007ec21b00
> [    1.333094] x1 : 0000000000000000 x0 : 0000000000000001
> [    1.338356] Call trace:
> [    1.340773]  _regulator_put.part.11+0xf0/0xf8
> [    1.345085]  regulator_put+0x34/0x48
> [    1.348621]  regulator_bulk_free+0x30/0x50
> [    1.352675]  devm_regulator_bulk_release+0x18/0x20
> [    1.357421]  release_nodes+0x1b0/0x220
> [    1.361127]  devres_release_all+0x34/0x50
> [    1.365094]  really_probe+0xec/0x290
> [    1.368630]  driver_probe_device+0x54/0xe8
> [    1.372684]  __device_attach_driver+0xb8/0xe8
> [    1.376997]  bus_for_each_drv+0x78/0xc8
> [    1.380792]  __device_attach+0xd4/0x130
> [    1.384587]  device_initial_probe+0x10/0x18
> [    1.388727]  bus_probe_device+0x90/0x98
> [    1.392522]  deferred_probe_work_func+0x6c/0xa0
> [    1.397010]  process_one_work+0x1e0/0x318
> [    1.400975]  worker_thread+0x228/0x428
> [    1.404684]  kthread+0x124/0x128
> [    1.407876]  ret_from_fork+0x10/0x18
> [    1.411410] ---[ end trace de5fd1b262c1f56a ]---
> [    1.416055] WARNING: CPU: 1 PID: 44 at drivers/regulator/core.c:2054 _regulator_put.part.11+0xf0/0xf8
> [    1.425123] Modules linked in:
> [    1.428144] CPU: 1 PID: 44 Comm: kworker/1:1 Tainted: G        W         5.0.0-rc1-xc2ml #3
> [    1.436422] Hardware name: Hardkernel ODROID-C2 (DT)
> [    1.441340] Workqueue: events deferred_probe_work_func
> 
> Fixes: 5a0803bd5ae (ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes)
> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Cc: Jerome Brunet <jbrunet@baylibre.com>
> Cc: Neil Armstrong <narmstrong@baylibre.com>
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> ---
> Fix the following power issue with usb device
> 
> [  795.380156] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> [  798.356073] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> [  801.331999] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> [  804.307919] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> [  807.283844] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> 
> [alarm@archl-c2m ~]$ lsusb -t
> /:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M
>     |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
>         |__ Port 1: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 480M
>         |__ Port 2: Dev 5, If 3, Class=Audio, Driver=, 480M
>         |__ Port 2: Dev 5, If 1, Class=Video, Driver=uvcvideo, 480M
>         |__ Port 2: Dev 5, If 2, Class=Audio, Driver=, 480M
>         |__ Port 2: Dev 5, If 0, Class=Video, Driver=uvcvideo, 480M
>         |__ Port 3: Dev 3, If 0, Class=Vendor Specific Class, Driver=, 480M
> 
> Similar Fix is need for Odroid C1+ to power on the phy nodes
> ---
>  arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> index 2e1cd5e3a246..b4e14ff614c4 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> @@ -28,6 +28,13 @@
>  		reg = <0x0 0x0 0x0 0x80000000>;
>  	};
>  
> +	p5v0: regulator-p5v0 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "P5V0";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +	};
> +
>  	usb_otg_pwr: regulator-usb-pwrs {
>  		compatible = "regulator-fixed";
>  
> @@ -36,6 +43,8 @@
>  		regulator-min-microvolt = <5000000>;
>  		regulator-max-microvolt = <5000000>;
>  
> +		vin-supply = <&p5v0>;
> +
>  		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
>  		enable-active-high;
>  	};
> @@ -303,6 +312,7 @@
>  
>  &usb0 {
>  	status = "okay";
> +	dr_mode = "peripheral";
>  };
>  
>  &usb1 {
> 


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH] ARM64: dts: meson-gxbb-odroidc2: Fix usb phy regulator warning
  2019-01-11 13:40 ` Neil Armstrong
@ 2019-01-11 16:16   ` Anand Moon
  2019-01-11 18:51     ` Kevin Hilman
  0 siblings, 1 reply; 4+ messages in thread
From: Anand Moon @ 2019-01-11 16:16 UTC (permalink / raw)
  To: Neil Armstrong
  Cc: devicetree, linux-arm-kernel, linux-amlogic, Linux Kernel,
	Rob Herring, Mark Rutland, Kevin Hilman, Martin Blumenstingl,
	Jerome Brunet

Hi Neil,

On Fri, 11 Jan 2019 at 19:10, Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Hi Anand,
>
> On 11/01/2019 10:22, Anand Moon wrote:
> > Add missing vin-supply 5V regulator node on usb_phy nodes needed
> > to power usb bus ports. Override the dr_mode from "host" to "peripheral"
> > for initialization of dwc2 usb0 phy node,changes fix the below
> > warning for usb initialization.
>
> I would have switch the dr_mode to peripheral in another patch,
> fix the regulator issue in this patch only.
>
> Neil
>
[snip]

Ok will split this into two patches and send after next dts updates.

Best Regards
-Anand

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH] ARM64: dts: meson-gxbb-odroidc2: Fix usb phy regulator warning
  2019-01-11 16:16   ` Anand Moon
@ 2019-01-11 18:51     ` Kevin Hilman
  0 siblings, 0 replies; 4+ messages in thread
From: Kevin Hilman @ 2019-01-11 18:51 UTC (permalink / raw)
  To: Anand Moon, Neil Armstrong
  Cc: devicetree, linux-arm-kernel, linux-amlogic, Linux Kernel,
	Rob Herring, Mark Rutland, Martin Blumenstingl, Jerome Brunet

Anand Moon <linux.amoon@gmail.com> writes:

> Hi Neil,
>
> On Fri, 11 Jan 2019 at 19:10, Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> Hi Anand,
>>
>> On 11/01/2019 10:22, Anand Moon wrote:
>> > Add missing vin-supply 5V regulator node on usb_phy nodes needed
>> > to power usb bus ports. Override the dr_mode from "host" to "peripheral"
>> > for initialization of dwc2 usb0 phy node,changes fix the below
>> > warning for usb initialization.
>>
>> I would have switch the dr_mode to peripheral in another patch,
>> fix the regulator issue in this patch only.
>>
>> Neil
>>
> [snip]
>
> Ok will split this into two patches and send after next dts updates.
>

When you split, please be specific about which part fixes which
problem.  e.g. it appears the dr_mode fixes the WARNING from the
regulator core by itself, and the vin-supply fixes the usb resets,
correct?  It wasn't obvious upon reading the changelog.

In either case, feel free to add:

Tested-by: Kevin Hilman <khilman@baylibre.com>

I tested on meson-gxbb-odroidc2 and it looks good.

Thanks for fixing this,

Kevin


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2019-01-11 18:51 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-11  9:22 [PATCH] ARM64: dts: meson-gxbb-odroidc2: Fix usb phy regulator warning Anand Moon
2019-01-11 13:40 ` Neil Armstrong
2019-01-11 16:16   ` Anand Moon
2019-01-11 18:51     ` Kevin Hilman

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).