Re: [PATCH v2 0/5] arm64: meson: add support for SM1 Power Domains

[Kevin Hilman <khilman@baylibre.com>]

Neil Armstrong <narmstrong@baylibre.com> writes:

> This patchset introduces a new "Everything-Else Power Domain Controller"
> designed to handle all the different non-Always On peripherals like :
> - VPU
> - Ethernet Memories
> - USB, PCIe, Audio, NNA on SM1
>
> The current "gx-vpu-pwrc" process has been integrated to support the VPU
> and the other power domains in a single driver.
>
> Support for SoC domains has been made generic and easily extendable.
>
> In order to restart from clean architecture :
> - the PWRC node has been moved into the HHI simple-mfd, this suits much
>   better than beeing in the AO RTI simple-mfd
> - a brand new yaml bindings schemas has been written
> - reset-names has been added to clarify which resets are needed, so we can
>   dispatch them to domains
>
> For G12A, the PWRC now offers support for the ethmac memory power domain.
>
> For SM1, it also offers support for PCIe, USB, NNA, ethmac and Audio power
> domains.
>
> The DOS domains has been excluded for now, but can be added very easily.
>
> GX hasn't been integrated for now, but it would follow the same scheme
> as G12A support.
>
> Changes since v1 at [1]:
> - removed open-coded reset & clock get, enable/assert, disable/deassert
> - moved to clk_bulk and reset_array with count check with a warning
> - removed remaining sm1_pwrc in probe
> - reordered arguments for VPU_PD and TOP_PD
> - added get_power for TOP_PD aswell
> - ported special VPU handling from gx-vpu-pwrc
> - added shutdown driver call to avoid errors on reboot
> - fixed patch 4 commit log
> - collected rob's review tag on patch 1
>
> [1] https://patchwork.kernel.org/cover/11106393/

Series queued for v5.4...

> Neil Armstrong (5):
>   dt-bindings: power: add Amlogic Everything-Else power domains bindings
>   soc: amlogic: Add support for Everything-Else power domains controller

These two in v5.4/drivers,

>   arm64: meson-g12: add Everything-Else power domain controller
>   arm64: dts: meson-sm1-sei610: add HDMI display support
>   arm64: dts: meson-sm1-sei610: add USB support

and these 3 in v5.4/dt64,

Thanks,

Kevin