From: Dio Putra <dioput12@gmail.com>
To: Greg KH <gregkh@linuxfoundation.org>
Cc: oneukum@suse.com, linux-usb@vger.kernel.org,
linux-scsi@vger.kernel.org, linux-usb@vger.kernel.org,
linux-scsi@vger.kernel.org, usb-storage@lists.one-eyed-alien.net,
stern@rowland.harvard.edu, linux-kernel@vger.kernel.org
Subject: Re: USB Attached SCSI breakage due no udev involvement
Date: Sun, 10 May 2020 16:48:30 +0700 [thread overview]
Message-ID: <80d4f4d9-91be-b7e8-1f64-13c2fe74f496@gmail.com> (raw)
In-Reply-To: <20200510084820.GA3598083@kroah.com>
[-- Attachment #1: Type: text/plain, Size: 4136 bytes --]
On 5/10/20 3:48 PM, Greg KH wrote:
> On Sun, May 10, 2020 at 03:35:34PM +0700, Dio Putra wrote:
>> On 5/10/20 2:32 PM, Greg KH wrote:
>>> On Sun, May 10, 2020 at 02:10:04PM +0700, Dio Putra wrote:
>>>> On 5/10/20 1:54 PM, Greg KH wrote:
>>>>> On Sun, May 10, 2020 at 01:48:24PM +0700, Dio Putra wrote:
>>>>>> On 5/10/20 12:47 PM, Greg KH wrote:
>>>>>>> On Sun, May 10, 2020 at 09:55:57AM +0700, Dio Putra wrote:
>>>>>>>> Hi, it's first time for me to report user-space breakage in here, so
>>>>>>>> i'm begging your pardon.
>>>>>>>>
>>>>>>>> I want to report that Linux 5.4 breaking my USB mount workflow due
>>>>>>>> udevadm monitor report here (I'm using vanilla kernel 5.4.39 on
>>>>>>>> Slackware64 Current and vanilla kernel 4.4.221 on Slackware64 14.2):
>>>>>>>
>>>>>>> <snip>
>>>>>>>
>>>>>>> Sorry, but what actually changed that you can see in the logs?
>>>>>> Sorry, what do you mean? The dmesg log or the kernel changelogs?
>>>>>
>>>>> Either, your message made them pretty impossible to compare with all of
>>>>> the line-wrapping :(
>>>>>
>>>> I'm so sorry for first message mess, because that message has been sent by
>>>> Gmail Website. Can I send my logs as attachment? I try to convenient everyone
>>>> here. ( FYI, I just switched to Thunderbird with these settings:
>>>> https://www.kernel.org/doc/html/v4.12/process/email-clients.html#thunderbird-gui )
>>>
>>> Sure, attachments work, but better yet, if you can show the difference
>>> in a few lines that is much nicer than having to dig through large
>>> numbers of log files.
>>>
>> Okay, I'll attach long messages and trim it as far as I can.
>
> Again, I really do not understand what exactly is "not working".
>
> Please explain that when you send the new log messages.
>
Okay, here's compilation of "dmesg | grep -i udev && udevadm
monitor && lsblk" on linux-4.4.221 vs linux-5.4.39. You can check
my attachment here because I can't explain it by words (I'm not
english native speaker anyway, which makes it so difficult to
explain it for me).
>>>>>>> What functionality broke? What used to work that no longer does work?
>>>>>>>
>>>>>> Yes, it supposed that just work and kernel could talk with udev, not just handled by the kernel.
>>>>>
>>>>> I don't understand, what functionality changed? What exactly used to
>>>>> work that no longer does?
>>>> linux-5.4 has been never called the udev dependencies whereas
>>>> linux-4.4 will call any udev dependencies if necessary, that's the problem.
>>>
>>> I do not understand what exactly you mean by "call udev dependencies".
>>>
>>> udev is used to create symlinks and set user/group permissions on device
>>> nodes in /dev/ which is created by devtmpfs. What exactly is not
>>> happening in your /dev/ with the move to a newer kernel?
>>>
>> Would I send my dmesg log with "udev.log-priority=debug" as attachment then?
>>
>>>>> Did you change anything else other than the kernel on your system? Did
>>>>> you change to a newer version of udev/systemd or anything else?
>>>>>
>>>> I'm using eudev-master from their official mirror github:
>>>> https://github.com/gentoo/eudev
>>>
>>> Have you contacted the eudev developers to see if something different
>>> needs to be set in your kernel when moving 4 years in kernel development
>>> forward? Are you sure you have all the correct config options enabled?
>>>
>> It's my bad not to contact the eudev developers first. However I'm not quite
>> sure to contact the eudev developers would solve the problem, but CMIIW.
>>
>>> Why such a huge leap forward all at once, how about going from 4.4.y to
>>> 4.9.y and then 4.14.y and then 5.4.y? That might help narrow things
>>> down a bit easier.
>>>
>> Unfortunately I need to think twice due almost ran out of electricity
>> here every time I power on my laptop for long time. So maybe I can't.
>>
>> But if these steps are necessary, I'll think solution later.
>
> Why would it take a long time to do this type of change?
>
It's a weak machine, it took appropriately 2 hours to just compiling
linux kernel. I need to think twice too because electricity is expensive here.
> thanks,
>
> greg k-h
>
[-- Attachment #2: linux-4.4.221-compilation_log.txt --]
[-- Type: text/plain, Size: 40551 bytes --]
[linux-4.4.221]$ sudo dmesg | grep -i udev
...<snip>...
[ 179.985628] udevd[597]: Validate module index
[ 179.985738] udevd[597]: seq 3190 queued, 'add' 'usb'
[ 179.986082] udevd[597]: seq 3190 forked new worker [2261]
[ 179.986562] udevd[2261]: seq 3190 running
[ 179.986905] udevd[2261]: no db file to read /run/udev/data/c189:130: No such file or directory
[ 179.987221] udevd[2261]: IMPORT builtin 'usb_id' /lib/udev/rules.d/40-libgphoto2.rules:11
[ 179.988381] udevd[597]: seq 3191 queued, 'add' 'usb'
[ 179.988827] udevd[597]: seq 3192 queued, 'add' 'scsi'
[ 179.988889] udevd[597]: seq 3193 queued, 'add' 'scsi_host'
[ 179.989999] udevd[2261]: IMPORT builtin skip 'usb_id' /lib/udev/rules.d/50-udev-default.rules:13
[ 179.990013] udevd[2261]: IMPORT builtin 'hwdb' /lib/udev/rules.d/50-udev-default.rules:13
[ 179.990245] udevd[2261]: MODE 0664 /lib/udev/rules.d/50-udev-default.rules:41
[ 179.990326] udevd[2261]: PROGRAM '/usr/sbin/obex-check-device 125f dc1a' /lib/udev/rules.d/60-openobex.rules:3
[ 179.991094] udevd[2265]: starting '/usr/sbin/obex-check-device 125f dc1a'
[ 179.998059] udevd[2261]: '/usr/sbin/obex-check-device 125f dc1a' [2265] exit with return code 1
[ 179.998489] udevd[2261]: PROGRAM 'mtp-probe /sys/devices/pci0000:00/0000:00:14.0/usb2/2-2 2 3' /lib/udev/rules.d/69-libmtp.rules:2041
[ 179.998971] udevd[2267]: starting 'mtp-probe /sys/devices/pci0000:00/0000:00:14.0/usb2/2-2 2 3'
[ 180.001904] udevd[2261]: 'mtp-probe /sys/devices/pci0000:00/0000:00:14.0/usb2/2-2 2 3'(out) '0'
[ 180.002014] udevd[2261]: 'mtp-probe /sys/devices/pci0000:00/0000:00:14.0/usb2/2-2 2 3' [2267] exit with return code 0
[ 180.002934] udevd[2261]: handling device node '/dev/bus/usb/002/003', devnum=c189:130, mode=0664, uid=0, gid=0
[ 180.002951] udevd[2261]: set permissions /dev/bus/usb/002/003, 020664, uid=0, gid=0
[ 180.002990] udevd[2261]: creating symlink '/dev/char/189:130' to '../bus/usb/002/003'
[ 180.003099] udevd[2261]: created db file '/run/udev/data/c189:130' for '/devices/pci0000:00/0000:00:14.0/usb2/2-2'
[ 180.024941] udevd[2261]: passed device to netlink monitor 0xaeb610
[ 180.024949] udevd[2261]: seq 3190 processed
[ 180.030287] udevd[597]: passed 294 byte device to netlink monitor 0xae2130
[ 180.030335] udevd[2261]: seq 3191 running
[ 180.030458] udevd[2261]: no db file to read /run/udev/data/+usb:2-2:1.0: No such file or directory
[ 180.030673] udevd[2261]: IMPORT builtin 'hwdb' /lib/udev/rules.d/50-udev-default.rules:15
[ 180.030848] udevd[2261]: RUN 'kmod load $env{MODALIAS}' /lib/udev/rules.d/80-drivers.rules:5
[ 180.031005] udevd[2261]: created db file '/run/udev/data/+usb:2-2:1.0' for '/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0'
[ 180.031019] udevd[2261]: Execute 'load' 'usb:v125FpDC1Ad1100dc00dsc00dp00ic08isc06ip50in00'
[ 180.031220] udevd[2261]: Inserted 'uas'
[ 180.031247] udevd[2261]: Inserted 'usb_storage'
[ 180.031312] udevd[2261]: passed device to netlink monitor 0xaeb610
[ 180.031318] udevd[2261]: seq 3191 processed
[ 180.031864] udevd[597]: passed 187 byte device to netlink monitor 0xae2130
[ 180.032255] udevd[2261]: seq 3192 running
[ 180.032336] udevd[2261]: no db file to read /run/udev/data/+scsi:host9: No such file or directory
[ 180.032731] udevd[2261]: passed device to netlink monitor 0xaeb610
[ 180.032737] udevd[2261]: seq 3192 processed
[ 180.032848] udevd[597]: passed 190 byte device to netlink monitor 0xae2130
[ 180.033444] udevd[2261]: seq 3193 running
[ 180.033514] udevd[2261]: no db file to read /run/udev/data/+scsi_host:host9: No such file or directory
[ 180.034120] udevd[2261]: passed device to netlink monitor 0xaeb610
[ 180.034127] udevd[2261]: seq 3193 processed
[ 181.253295] udevd[597]: seq 3194 queued, 'add' 'scsi'
[ 181.253360] udevd[597]: passed 201 byte device to netlink monitor 0xae2130
[ 181.253451] udevd[2261]: seq 3194 running
[ 181.253492] udevd[597]: seq 3195 queued, 'add' 'scsi'
[ 181.253575] udevd[597]: seq 3196 queued, 'add' 'scsi_disk'
[ 181.253635] udevd[2261]: no db file to read /run/udev/data/+scsi:target9:0:0: No such file or directory
[ 181.253647] udevd[597]: seq 3197 queued, 'add' 'scsi_device'
[ 181.253725] udevd[597]: seq 3198 queued, 'add' 'bsg'
[ 181.254339] udevd[2261]: passed device to netlink monitor 0xaeb610
[ 181.254350] udevd[2261]: seq 3194 processed
[ 181.255242] udevd[597]: passed 230 byte device to netlink monitor 0xae2130
[ 181.255328] udevd[2261]: seq 3195 running
[ 181.255440] udevd[2261]: no db file to read /run/udev/data/+scsi:9:0:0:0: No such file or directory
[ 181.255466] udevd[2261]: IMPORT builtin 'hwdb' /lib/udev/rules.d/50-udev-default.rules:15
[ 181.255594] udevd[2261]: no db file to read /run/udev/data/+scsi:target9:0:0: No such file or directory
[ 181.255680] udevd[2261]: no db file to read /run/udev/data/+scsi:host9: No such file or directory
[ 181.255803] udevd[2261]: IMPORT builtin 'hwdb' returned non-zero
[ 181.256027] udevd[2261]: RUN 'kmod load $env{MODALIAS}' /lib/udev/rules.d/80-drivers.rules:5
[ 181.256268] udevd[2261]: Execute 'load' 'scsi:t-0x00'
[ 181.256293] udevd[2261]: No module matches 'scsi:t-0x00'
[ 181.256353] udevd[2261]: passed device to netlink monitor 0xaeb610
[ 181.256361] udevd[2261]: seq 3195 processed
[ 181.256889] udevd[597]: passed 212 byte device to netlink monitor 0xae2130
[ 181.257277] udevd[597]: seq 3197 forked new worker [2289]
[ 181.257589] udevd[597]: seq 3198 forked new worker [2290]
[ 181.258064] udevd[2261]: seq 3196 running
[ 181.258177] udevd[2261]: no db file to read /run/udev/data/+scsi_disk:9:0:0:0: No such file or directory
[ 181.258996] udevd[2261]: passed device to netlink monitor 0xaeb610
[ 181.259006] udevd[2261]: seq 3196 processed
[ 181.260725] udevd[2290]: seq 3198 running
[ 181.260762] udevd[2289]: seq 3197 running
[ 181.260972] udevd[2289]: no db file to read /run/udev/data/+scsi_device:9:0:0:0: No such file or directory
[ 181.260974] udevd[2290]: no db file to read /run/udev/data/c250:2: No such file or directory
[ 181.261977] udevd[2290]: handling device node '/dev/bsg/9:0:0:0', devnum=c250:2, mode=0600, uid=0, gid=0
[ 181.261994] udevd[2290]: preserve permissions /dev/bsg/9:0:0:0, 020600, uid=0, gid=0
[ 181.262030] udevd[2290]: creating symlink '/dev/char/250:2' to '../bsg/9:0:0:0'
[ 181.262103] udevd[2290]: created empty file '/run/udev/data/c250:2' for '/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/bsg/9:0:0:0'
[ 181.262849] udevd[597]: seq 3199 queued, 'add' 'bdi'
[ 181.262946] udevd[597]: passed 138 byte device to netlink monitor 0xae2130
[ 181.263043] udevd[2261]: seq 3199 running
[ 181.263109] udevd[2261]: no db file to read /run/udev/data/+bdi:8:32: No such file or directory
[ 181.263311] udevd[2261]: passed device to netlink monitor 0xaeb610
[ 181.263319] udevd[2261]: seq 3199 processed
[ 181.263996] udevd[2289]: passed device to netlink monitor 0xae44a0
[ 181.264004] udevd[2289]: seq 3197 processed
[ 181.264116] udevd[2290]: passed device to netlink monitor 0xaf5ce0
[ 181.264125] udevd[2290]: seq 3198 processed
[ 181.270013] udevd[597]: seq 3200 queued, 'add' 'block'
[ 181.270071] udevd[597]: passed 247 byte device to netlink monitor 0xae2130
[ 181.270157] udevd[2289]: seq 3200 running
[ 181.270185] udevd[597]: seq 3201 queued, 'add' 'block'
[ 181.270266] udevd[597]: seq 3202 queued, 'add' 'block'
[ 181.271450] udevd[2289]: no db file to read /run/udev/data/b8:32: No such file or directory
[ 181.272310] udevd[2289]: GROUP 6 /lib/udev/rules.d/50-udev-default.rules:55
[ 181.272551] udevd[2289]: IMPORT builtin 'usb_id' /lib/udev/rules.d/60-persistent-storage.rules:31
[ 181.272711] udevd[2289]: /sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0: if_class 8 protocol 6
[ 181.273055] udevd[2289]: LINK 'disk/by-id/usb-ADATA_USB_Flash_Drive_25B2521060220044-0:0' /lib/udev/rules.d/60-persistent-storage.rules:36
[ 181.273147] udevd[2289]: IMPORT builtin 'path_id' /lib/udev/rules.d/60-persistent-storage.rules:54
[ 181.273335] udevd[2289]: LINK 'disk/by-path/pci-0000:00:14.0-usb-0:2:1.0-scsi-0:0:0:0' /lib/udev/rules.d/60-persistent-storage.rules:55
[ 181.273348] udevd[2289]: IMPORT builtin 'blkid' /lib/udev/rules.d/60-persistent-storage.rules:66
[ 181.273874] udevd[2289]: probe /dev/sdc raid offset=0
[ 181.331985] udevd[2289]: GROUP 6 /lib/udev/rules.d/65-permissions.rules:13
[ 181.332004] udevd[2289]: GROUP 83 /lib/udev/rules.d/65-permissions.rules:16
[ 181.332202] udevd[2289]: IMPORT 'udisks-part-id /dev/sdc' /lib/udev/rules.d/80-udisks.rules:84
[ 181.332732] udevd[2291]: starting 'udisks-part-id /dev/sdc'
[ 181.339628] udevd[2289]: 'udisks-part-id /dev/sdc'(err) 'using device_file=/dev/sdc syspath=/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc, offset=0 ao=0 and number=0 for /dev/sdc'
[ 181.339771] udevd[2289]: 'udisks-part-id /dev/sdc'(err) 'Entering MS-DOS parser (offset=0, size=15518924800)'
[ 181.339800] udevd[2289]: 'udisks-part-id /dev/sdc'(err) 'MSDOS_MAGIC found'
[ 181.339812] udevd[2289]: 'udisks-part-id /dev/sdc'(err) 'looking at part 0 (offset 1048576, size 4293918720, type 0x0b)'
[ 181.339818] udevd[2289]: 'udisks-part-id /dev/sdc'(err) 'new part entry'
[ 181.339829] udevd[2289]: 'udisks-part-id /dev/sdc'(err) 'looking at part 1 (offset 4294967296, size 11223957504, type 0x83)'
[ 181.339835] udevd[2289]: 'udisks-part-id /dev/sdc'(err) 'new part entry'
[ 181.339841] udevd[2289]: 'udisks-part-id /dev/sdc'(err) 'looking at part 2 (offset 0, size 0, type 0x00)'
[ 181.339852] udevd[2289]: 'udisks-part-id /dev/sdc'(err) 'new part entry'
[ 181.339858] udevd[2289]: 'udisks-part-id /dev/sdc'(err) 'looking at part 3 (offset 0, size 0, type 0x00)'
[ 181.339864] udevd[2289]: 'udisks-part-id /dev/sdc'(err) 'new part entry'
[ 181.339869] udevd[2289]: 'udisks-part-id /dev/sdc'(err) 'Exiting MS-DOS parser'
[ 181.339875] udevd[2289]: 'udisks-part-id /dev/sdc'(err) 'MSDOS partition table detected'
[ 181.339931] udevd[2289]: 'udisks-part-id /dev/sdc'(out) 'UDISKS_PARTITION_TABLE=1'
[ 181.339951] udevd[2289]: 'udisks-part-id /dev/sdc'(out) 'UDISKS_PARTITION_TABLE_SCHEME=mbr'
[ 181.339958] udevd[2289]: 'udisks-part-id /dev/sdc'(out) 'UDISKS_PARTITION_TABLE_COUNT=2'
[ 181.340528] udevd[2289]: 'udisks-part-id /dev/sdc' [2291] exit with return code 0
[ 181.340729] udevd[2289]: handling device node '/dev/sdc', devnum=b8:32, mode=0660, uid=0, gid=83
[ 181.340742] udevd[2289]: set permissions /dev/sdc, 060660, uid=0, gid=83
[ 181.340773] udevd[2289]: creating symlink '/dev/block/8:32' to '../sdc'
[ 181.340804] udevd[2289]: creating link '/dev/disk/by-id/usb-ADATA_USB_Flash_Drive_25B2521060220044-0:0' to '/dev/sdc'
[ 181.340816] udevd[2289]: creating symlink '/dev/disk/by-id/usb-ADATA_USB_Flash_Drive_25B2521060220044-0:0' to '../../sdc'
[ 181.340864] udevd[2289]: creating link '/dev/disk/by-path/pci-0000:00:14.0-usb-0:2:1.0-scsi-0:0:0:0' to '/dev/sdc'
[ 181.340874] udevd[2289]: creating symlink '/dev/disk/by-path/pci-0000:00:14.0-usb-0:2:1.0-scsi-0:0:0:0' to '../../sdc'
[ 181.341006] udevd[2289]: created db file '/run/udev/data/b8:32' for '/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc'
[ 181.341022] udevd[2289]: adding watch on '/dev/sdc'
[ 181.341104] udevd[2289]: created db file '/run/udev/data/b8:32' for '/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc'
[ 181.341387] udevd[2289]: passed device to netlink monitor 0xae44a0
[ 181.341394] udevd[2289]: seq 3200 processed
[ 181.341752] udevd[597]: passed 258 byte device to netlink monitor 0xae2130
[ 181.341773] udevd[597]: passed 258 byte device to netlink monitor 0xae2130
[ 181.342140] udevd[2290]: seq 3202 running
[ 181.342577] udevd[2289]: seq 3201 running
[ 181.344183] udevd[2290]: no db file to read /run/udev/data/b8:34: No such file or directory
[ 181.344945] udevd[2290]: GROUP 6 /lib/udev/rules.d/50-udev-default.rules:55
[ 181.345086] udevd[2290]: LINK 'disk/by-id/usb-ADATA_USB_Flash_Drive_25B2521060220044-0:0-part2' /lib/udev/rules.d/60-persistent-storage.rules:37
[ 181.345165] udevd[2290]: LINK 'disk/by-path/pci-0000:00:14.0-usb-0:2:1.0-scsi-0:0:0:0-part2' /lib/udev/rules.d/60-persistent-storage.rules:56
[ 181.345174] udevd[2290]: IMPORT builtin 'blkid' /lib/udev/rules.d/60-persistent-storage.rules:66
[ 181.345795] udevd[2290]: probe /dev/sdc2 raid offset=0
[ 181.348112] udevd[2289]: no db file to read /run/udev/data/b8:33: No such file or directory
[ 181.348869] udevd[2289]: GROUP 6 /lib/udev/rules.d/50-udev-default.rules:55
[ 181.348987] udevd[2289]: LINK 'disk/by-id/usb-ADATA_USB_Flash_Drive_25B2521060220044-0:0-part1' /lib/udev/rules.d/60-persistent-storage.rules:37
[ 181.349064] udevd[2289]: LINK 'disk/by-path/pci-0000:00:14.0-usb-0:2:1.0-scsi-0:0:0:0-part1' /lib/udev/rules.d/60-persistent-storage.rules:56
[ 181.349073] udevd[2289]: IMPORT builtin 'blkid' /lib/udev/rules.d/60-persistent-storage.rules:66
[ 181.350313] udevd[2289]: probe /dev/sdc1 raid offset=0
[ 181.393994] udevd[2289]: LINK 'disk/by-uuid/F200-1CEE' /lib/udev/rules.d/60-persistent-storage.rules:69
[ 181.394063] udevd[2289]: GROUP 6 /lib/udev/rules.d/65-permissions.rules:13
[ 181.394108] udevd[2289]: GROUP 83 /lib/udev/rules.d/65-permissions.rules:17
[ 181.394533] udevd[2289]: IMPORT 'udisks-part-id /dev/sdc1' /lib/udev/rules.d/80-udisks.rules:84
[ 181.394890] udevd[2294]: starting 'udisks-part-id /dev/sdc1'
[ 181.406063] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) 'using device_file=/dev/sdc syspath=/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc, offset=1048576 ao=0 and number=1 for /dev/sdc1'
[ 181.406988] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) 'Entering MS-DOS parser (offset=0, size=15518924800)'
[ 181.407016] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) ''
[ 181.407057] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) 'MSDOS_MAGIC found'
[ 181.407076] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) ''
[ 181.407101] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) 'looking at part 0 (offset 1048576, size 4293918720, type 0x0b)'
[ 181.407119] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) ''
[ 181.407138] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) 'new part entry'
[ 181.407156] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) ''
[ 181.407188] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) 'looking at part 1 (offset 4294967296, size 11223957504, type 0x83)'
[ 181.407207] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) ''
[ 181.407235] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) 'new part entry'
[ 181.407701] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) ''
[ 181.407739] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) 'looking at part 2 (offset 0, size 0, type 0x00)'
[ 181.407757] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) ''
[ 181.407776] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) 'new part entry'
[ 181.407794] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) ''
[ 181.407815] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) 'looking at part 3 (offset 0, size 0, type 0x00)'
[ 181.407833] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) ''
[ 181.407852] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) 'new part entry'
[ 181.407870] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) ''
[ 181.407890] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) 'Exiting MS-DOS parser'
[ 181.407908] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) ''
[ 181.407927] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) 'MSDOS partition table detected'
[ 181.407945] udevd[2289]: 'udisks-part-id /dev/sdc1'(err) ''
[ 181.408033] udevd[2289]: 'udisks-part-id /dev/sdc1'(out) 'UDISKS_PARTITION=1'
[ 181.408066] udevd[2289]: 'udisks-part-id /dev/sdc1'(out) 'UDISKS_PARTITION_SCHEME=mbr'
[ 181.408092] udevd[2289]: 'udisks-part-id /dev/sdc1'(out) 'UDISKS_PARTITION_NUMBER=1'
[ 181.408117] udevd[2289]: 'udisks-part-id /dev/sdc1'(out) 'UDISKS_PARTITION_TYPE=0x0b'
[ 181.408142] udevd[2289]: 'udisks-part-id /dev/sdc1'(out) 'UDISKS_PARTITION_SIZE=4293918720'
[ 181.408167] udevd[2289]: 'udisks-part-id /dev/sdc1'(out) 'UDISKS_PARTITION_LABEL='
[ 181.408192] udevd[2289]: 'udisks-part-id /dev/sdc1'(out) 'UDISKS_PARTITION_UUID='
[ 181.408216] udevd[2289]: 'udisks-part-id /dev/sdc1'(out) 'UDISKS_PARTITION_FLAGS='
[ 181.408983] udevd[2289]: 'udisks-part-id /dev/sdc1'(out) 'UDISKS_PARTITION_SLAVE=/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc'
[ 181.409014] udevd[2289]: 'udisks-part-id /dev/sdc1'(out) 'UDISKS_PARTITION_OFFSET=1048576'
[ 181.409050] udevd[2289]: 'udisks-part-id /dev/sdc1'(out) 'UDISKS_PARTITION_ALIGNMENT_OFFSET=0'
[ 181.409600] udevd[2289]: 'udisks-part-id /dev/sdc1' [2294] exit with return code 0
[ 181.409842] udevd[2289]: handling device node '/dev/sdc1', devnum=b8:33, mode=0660, uid=0, gid=83
[ 181.409852] udevd[2289]: set permissions /dev/sdc1, 060660, uid=0, gid=83
[ 181.409880] udevd[2289]: creating symlink '/dev/block/8:33' to '../sdc1'
[ 181.409907] udevd[2289]: creating link '/dev/disk/by-id/usb-ADATA_USB_Flash_Drive_25B2521060220044-0:0-part1' to '/dev/sdc1'
[ 181.409917] udevd[2289]: creating symlink '/dev/disk/by-id/usb-ADATA_USB_Flash_Drive_25B2521060220044-0:0-part1' to '../../sdc1'
[ 181.409958] udevd[2289]: creating link '/dev/disk/by-path/pci-0000:00:14.0-usb-0:2:1.0-scsi-0:0:0:0-part1' to '/dev/sdc1'
[ 181.409967] udevd[2289]: creating symlink '/dev/disk/by-path/pci-0000:00:14.0-usb-0:2:1.0-scsi-0:0:0:0-part1' to '../../sdc1'
[ 181.410001] udevd[2289]: creating link '/dev/disk/by-uuid/F200-1CEE' to '/dev/sdc1'
[ 181.410010] udevd[2289]: creating symlink '/dev/disk/by-uuid/F200-1CEE' to '../../sdc1'
[ 181.410127] udevd[2289]: created db file '/run/udev/data/b8:33' for '/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc/sdc1'
[ 181.410141] udevd[2289]: adding watch on '/dev/sdc1'
[ 181.410250] udevd[2289]: created db file '/run/udev/data/b8:33' for '/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc/sdc1'
[ 181.410317] udevd[2289]: passed device to netlink monitor 0xae44a0
[ 181.410322] udevd[2289]: seq 3201 processed
[ 181.441837] udevd[2290]: LINK 'disk/by-uuid/47e5c8f0-10a8-48c6-aafd-d45598c31b6d' /lib/udev/rules.d/60-persistent-storage.rules:69
[ 181.441904] udevd[2290]: GROUP 6 /lib/udev/rules.d/65-permissions.rules:13
[ 181.441947] udevd[2290]: GROUP 83 /lib/udev/rules.d/65-permissions.rules:17
[ 181.442109] udevd[2290]: IMPORT 'udisks-part-id /dev/sdc2' /lib/udev/rules.d/80-udisks.rules:84
[ 181.442659] udevd[2297]: starting 'udisks-part-id /dev/sdc2'
[ 181.460380] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) 'using device_file=/dev/sdc syspath=/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc, offset=4294967296 ao=0 and number=2 for /dev/sdc2'
[ 181.460667] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) 'Entering MS-DOS parser (offset=0, size=15518924800)'
[ 181.460693] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) ''
[ 181.460737] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) 'MSDOS_MAGIC found'
[ 181.460966] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) ''
[ 181.460996] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) 'looking at part 0 (offset 1048576, size 4293918720, type 0x0b)'
[ 181.461015] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) ''
[ 181.461034] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) 'new part entry'
[ 181.461421] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) ''
[ 181.461461] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) 'looking at part 1 (offset 4294967296, size 11223957504, type 0x83)'
[ 181.461480] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) ''
[ 181.461499] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) 'new part entry'
[ 181.461517] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) ''
[ 181.461539] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) 'looking at part 2 (offset 0, size 0, type 0x00)'
[ 181.461558] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) ''
[ 181.461576] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) 'new part entry'
[ 181.461595] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) ''
[ 181.461616] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) 'looking at part 3 (offset 0, size 0, type 0x00)'
[ 181.461634] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) ''
[ 181.461653] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) 'new part entry'
[ 181.461670] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) ''
[ 181.461691] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) 'Exiting MS-DOS parser'
[ 181.461709] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) ''
[ 181.461728] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) 'MSDOS partition table detected'
[ 181.461746] udevd[2290]: 'udisks-part-id /dev/sdc2'(err) ''
[ 181.464076] udevd[2290]: 'udisks-part-id /dev/sdc2'(out) 'UDISKS_PARTITION=1'
[ 181.464125] udevd[2290]: 'udisks-part-id /dev/sdc2'(out) 'UDISKS_PARTITION_SCHEME=mbr'
[ 181.464154] udevd[2290]: 'udisks-part-id /dev/sdc2'(out) 'UDISKS_PARTITION_NUMBER=2'
[ 181.464180] udevd[2290]: 'udisks-part-id /dev/sdc2'(out) 'UDISKS_PARTITION_TYPE=0x83'
[ 181.464207] udevd[2290]: 'udisks-part-id /dev/sdc2'(out) 'UDISKS_PARTITION_SIZE=11223957504'
[ 181.464250] udevd[2290]: 'udisks-part-id /dev/sdc2'(out) 'UDISKS_PARTITION_LABEL='
[ 181.464278] udevd[2290]: 'udisks-part-id /dev/sdc2'(out) 'UDISKS_PARTITION_UUID='
[ 181.464304] udevd[2290]: 'udisks-part-id /dev/sdc2'(out) 'UDISKS_PARTITION_FLAGS=boot'
[ 181.464333] udevd[2290]: 'udisks-part-id /dev/sdc2'(out) 'UDISKS_PARTITION_SLAVE=/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc'
[ 181.464361] udevd[2290]: 'udisks-part-id /dev/sdc2'(out) 'UDISKS_PARTITION_OFFSET=4294967296'
[ 181.464391] udevd[2290]: 'udisks-part-id /dev/sdc2'(out) 'UDISKS_PARTITION_ALIGNMENT_OFFSET=0'
[ 181.464779] udevd[2290]: 'udisks-part-id /dev/sdc2' [2297] exit with return code 0
[ 181.465023] udevd[2290]: handling device node '/dev/sdc2', devnum=b8:34, mode=0660, uid=0, gid=83
[ 181.465033] udevd[2290]: set permissions /dev/sdc2, 060660, uid=0, gid=83
[ 181.465061] udevd[2290]: creating symlink '/dev/block/8:34' to '../sdc2'
[ 181.465088] udevd[2290]: creating link '/dev/disk/by-id/usb-ADATA_USB_Flash_Drive_25B2521060220044-0:0-part2' to '/dev/sdc2'
[ 181.465098] udevd[2290]: creating symlink '/dev/disk/by-id/usb-ADATA_USB_Flash_Drive_25B2521060220044-0:0-part2' to '../../sdc2'
[ 181.465139] udevd[2290]: creating link '/dev/disk/by-path/pci-0000:00:14.0-usb-0:2:1.0-scsi-0:0:0:0-part2' to '/dev/sdc2'
[ 181.465148] udevd[2290]: creating symlink '/dev/disk/by-path/pci-0000:00:14.0-usb-0:2:1.0-scsi-0:0:0:0-part2' to '../../sdc2'
[ 181.465181] udevd[2290]: creating link '/dev/disk/by-uuid/47e5c8f0-10a8-48c6-aafd-d45598c31b6d' to '/dev/sdc2'
[ 181.465191] udevd[2290]: creating symlink '/dev/disk/by-uuid/47e5c8f0-10a8-48c6-aafd-d45598c31b6d' to '../../sdc2'
[ 181.465309] udevd[2290]: created db file '/run/udev/data/b8:34' for '/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc/sdc2'
[ 181.465324] udevd[2290]: adding watch on '/dev/sdc2'
[ 181.465399] udevd[2290]: created db file '/run/udev/data/b8:34' for '/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc/sdc2'
[ 181.465473] udevd[2290]: passed device to netlink monitor 0xaf5ce0
[ 181.465478] udevd[2290]: seq 3202 processed
[ 184.470471] udevd[597]: cleanup idle workers
[ 184.470553] udevd[597]: Validate module index
[ 184.470829] udevd[2289]: Unload module index
[ 184.470872] udevd[2290]: Unload module index
[ 184.471291] udevd[597]: worker [2289] exited
[ 184.471340] udevd[597]: worker [2290] exited
[ 184.471420] udevd[2261]: Unload module index
[ 184.471968] udevd[597]: worker [2261] exited
[ 192.508736] udevd[597]: Validate module index
[ 192.508816] udevd[597]: seq 3203 queued, 'change' 'block'
[ 192.509046] udevd[597]: seq 3203 forked new worker [2311]
[ 192.511242] udevd[2311]: seq 3203 running
[ 192.513727] udevd[2311]: removing watch on '/dev/sdc'
[ 192.514447] udevd[597]: seq 3204 queued, 'remove' 'block'
[ 192.514582] udevd[597]: seq 3205 queued, 'remove' 'block'
[ 192.514633] udevd[2311]: IMPORT builtin 'usb_id' /lib/udev/rules.d/60-persistent-storage.rules:31
[ 192.514757] udevd[2311]: /sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0: if_class 8 protocol 6
[ 192.515224] udevd[2311]: LINK 'disk/by-id/usb-ADATA_USB_Flash_Drive_25B2521060220044-0:0' /lib/udev/rules.d/60-persistent-storage.rules:36
[ 192.521803] udevd[2311]: IMPORT builtin 'path_id' /lib/udev/rules.d/60-persistent-storage.rules:54
[ 192.521954] udevd[2311]: LINK 'disk/by-path/pci-0000:00:14.0-usb-0:2:1.0-scsi-0:0:0:0' /lib/udev/rules.d/60-persistent-storage.rules:55
[ 192.521965] udevd[2311]: IMPORT builtin 'blkid' /lib/udev/rules.d/60-persistent-storage.rules:66
[ 192.525420] udevd[2311]: Failure opening block device /dev/sdc: No medium found
[ 192.525498] udevd[2311]: GROUP 6 /lib/udev/rules.d/65-permissions.rules:13
[ 192.525507] udevd[2311]: GROUP 83 /lib/udev/rules.d/65-permissions.rules:16
[ 192.526826] udevd[2311]: IMPORT 'udisks-part-id /dev/sdc' /lib/udev/rules.d/80-udisks.rules:84
[ 192.532851] udevd[2312]: starting 'udisks-part-id /dev/sdc'
[ 192.538980] udevd[2311]: 'udisks-part-id /dev/sdc'(err) 'using device_file=/dev/sdc syspath=/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc, offset=0 ao=0 and number=0 for /dev/sdc'
[ 192.539760] udevd[2311]: 'udisks-part-id /dev/sdc'(err) 'Error opening /dev/sdc: No medium found'
[ 192.540125] udevd[2311]: 'udisks-part-id /dev/sdc' [2312] exit with return code 0
[ 192.540302] udevd[2311]: handling device node '/dev/sdc', devnum=b8:32, mode=0660, uid=0, gid=83
[ 192.540312] udevd[2311]: preserve permissions /dev/sdc, 060660, uid=0, gid=83
[ 192.540333] udevd[2311]: preserve already existing symlink '/dev/block/8:32' to '../sdc'
[ 192.540366] udevd[2311]: found 'b8:32' claiming '/run/udev/links/\x2fdisk\x2fby-id\x2fusb-ADATA_USB_Flash_Drive_25B2521060220044-0:0'
[ 192.540377] udevd[2311]: creating link '/dev/disk/by-id/usb-ADATA_USB_Flash_Drive_25B2521060220044-0:0' to '/dev/sdc'
[ 192.540390] udevd[2311]: preserve already existing symlink '/dev/disk/by-id/usb-ADATA_USB_Flash_Drive_25B2521060220044-0:0' to '../../sdc'
[ 192.540420] udevd[2311]: found 'b8:32' claiming '/run/udev/links/\x2fdisk\x2fby-path\x2fpci-0000:00:14.0-usb-0:2:1.0-scsi-0:0:0:0'
[ 192.540429] udevd[2311]: creating link '/dev/disk/by-path/pci-0000:00:14.0-usb-0:2:1.0-scsi-0:0:0:0' to '/dev/sdc'
[ 192.540440] udevd[2311]: preserve already existing symlink '/dev/disk/by-path/pci-0000:00:14.0-usb-0:2:1.0-scsi-0:0:0:0' to '../../sdc'
[ 192.540520] udevd[2311]: created db file '/run/udev/data/b8:32' for '/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc'
[ 192.540540] udevd[2311]: adding watch on '/dev/sdc'
[ 192.540623] udevd[2311]: created db file '/run/udev/data/b8:32' for '/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc'
[ 192.540685] udevd[2311]: passed device to netlink monitor 0xae8a40
[ 192.540691] udevd[2311]: seq 3203 processed
[ 192.543612] udevd[597]: passed 261 byte device to netlink monitor 0xae2130
[ 192.543847] udevd[597]: seq 3205 forked new worker [2313]
[ 192.545561] udevd[2311]: seq 3204 running
[ 192.545708] udevd[2311]: removing watch on '/dev/sdc1'
[ 192.546207] udevd[2311]: no reference left, remove '/dev/disk/by-id/usb-ADATA_USB_Flash_Drive_25B2521060220044-0:0-part1'
[ 192.546264] udevd[2311]: no reference left, remove '/dev/disk/by-path/pci-0000:00:14.0-usb-0:2:1.0-scsi-0:0:0:0-part1'
[ 192.546290] udevd[2311]: no reference left, remove '/dev/disk/by-uuid/F200-1CEE'
[ 192.546369] udevd[2311]: passed device to netlink monitor 0xae8a40
[ 192.546376] udevd[2311]: seq 3204 processed
[ 192.548629] udevd[2313]: seq 3205 running
[ 192.548788] udevd[2313]: removing watch on '/dev/sdc2'
[ 192.552831] udevd[2313]: no reference left, remove '/dev/disk/by-id/usb-ADATA_USB_Flash_Drive_25B2521060220044-0:0-part2'
[ 192.552873] udevd[2313]: no reference left, remove '/dev/disk/by-path/pci-0000:00:14.0-usb-0:2:1.0-scsi-0:0:0:0-part2'
[ 192.552899] udevd[2313]: no reference left, remove '/dev/disk/by-uuid/47e5c8f0-10a8-48c6-aafd-d45598c31b6d'
[ 192.555590] udevd[2313]: passed device to netlink monitor 0xaeb310
[ 192.555603] udevd[2313]: seq 3205 processed
[ 195.310805] udevd[597]: seq 3206 queued, 'remove' 'bsg'
[ 195.310961] udevd[597]: passed 246 byte device to netlink monitor 0xae2130
[ 195.311102] udevd[597]: seq 3207 queued, 'remove' 'scsi_device'
[ 195.311182] udevd[597]: passed 219 byte device to netlink monitor 0xae2130
[ 195.311255] udevd[597]: seq 3208 queued, 'remove' 'scsi_disk'
[ 195.311698] udevd[597]: seq 3208 forked new worker [2315]
[ 195.311796] udevd[2313]: seq 3206 running
[ 195.312444] udevd[2313]: passed device to netlink monitor 0xaeb310
[ 195.312454] udevd[2313]: seq 3206 processed
[ 195.312543] udevd[2311]: seq 3207 running
[ 195.312590] udevd[2311]: no db file to read /run/udev/data/+scsi_device:9:0:0:0: No such file or directory
[ 195.313199] udevd[2311]: passed device to netlink monitor 0xae8a40
[ 195.313211] udevd[2311]: seq 3207 processed
[ 195.313760] udevd[2315]: seq 3208 running
[ 195.313902] udevd[2315]: no db file to read /run/udev/data/+scsi_disk:9:0:0:0: No such file or directory
[ 195.314589] udevd[2315]: passed device to netlink monitor 0xaf35b0
[ 195.314601] udevd[2315]: seq 3208 processed
[ 195.316654] udevd[597]: seq 3209 queued, 'remove' 'block'
[ 195.316710] udevd[597]: passed 250 byte device to netlink monitor 0xae2130
[ 195.317160] udevd[2315]: seq 3209 running
[ 195.317343] udevd[2315]: removing watch on '/dev/sdc'
[ 195.318074] udevd[2315]: no reference left, remove '/dev/disk/by-id/usb-ADATA_USB_Flash_Drive_25B2521060220044-0:0'
[ 195.318165] udevd[2315]: no reference left, remove '/dev/disk/by-path/pci-0000:00:14.0-usb-0:2:1.0-scsi-0:0:0:0'
[ 195.319033] udevd[2315]: passed device to netlink monitor 0xaf35b0
[ 195.319048] udevd[2315]: seq 3209 processed
[ 195.321146] udevd[597]: seq 3210 queued, 'remove' 'scsi'
[ 195.321189] udevd[597]: passed 233 byte device to netlink monitor 0xae2130
[ 195.321391] udevd[2315]: seq 3210 running
[ 195.321437] udevd[2315]: no db file to read /run/udev/data/+scsi:9:0:0:0: No such file or directory
[ 195.322568] udevd[2315]: passed device to netlink monitor 0xaf35b0
[ 195.322618] udevd[2315]: seq 3210 processed
[ 195.324052] udevd[597]: seq 3211 queued, 'remove' 'bdi'
[ 195.324156] udevd[597]: passed 141 byte device to netlink monitor 0xae2130
[ 195.324208] udevd[2315]: seq 3211 running
[ 195.324251] udevd[597]: seq 3212 queued, 'remove' 'scsi'
[ 195.324263] udevd[2315]: no db file to read /run/udev/data/+bdi:8:32: No such file or directory
[ 195.324279] udevd[597]: passed 204 byte device to netlink monitor 0xae2130
[ 195.324509] udevd[2313]: seq 3212 running
[ 195.324519] udevd[2315]: passed device to netlink monitor 0xaf35b0
[ 195.324529] udevd[2315]: seq 3211 processed
[ 195.324549] udevd[2313]: no db file to read /run/udev/data/+scsi:target9:0:0: No such file or directory
[ 195.324962] udevd[2313]: passed device to netlink monitor 0xaeb310
[ 195.324972] udevd[2313]: seq 3212 processed
[ 195.337157] udevd[597]: seq 3213 queued, 'remove' 'scsi_host'
[ 195.337287] udevd[597]: passed 193 byte device to netlink monitor 0xae2130
[ 195.337403] udevd[597]: seq 3214 queued, 'remove' 'scsi'
[ 195.338366] udevd[597]: seq 3215 queued, 'remove' 'usb'
[ 195.338454] udevd[597]: seq 3216 queued, 'remove' 'usb'
[ 195.338502] udevd[2315]: seq 3213 running
[ 195.338552] udevd[2315]: no db file to read /run/udev/data/+scsi_host:host9: No such file or directory
[ 195.339749] udevd[2315]: passed device to netlink monitor 0xaf35b0
[ 195.339763] udevd[2315]: seq 3213 processed
[ 195.339873] udevd[597]: passed 190 byte device to netlink monitor 0xae2130
[ 195.340384] udevd[2315]: seq 3214 running
[ 195.340435] udevd[2315]: no db file to read /run/udev/data/+scsi:host9: No such file or directory
[ 195.341159] udevd[2315]: passed device to netlink monitor 0xaf35b0
[ 195.341170] udevd[2315]: seq 3214 processed
[ 195.341256] udevd[597]: passed 297 byte device to netlink monitor 0xae2130
[ 195.341866] udevd[2315]: seq 3215 running
[ 195.342952] udevd[2315]: passed device to netlink monitor 0xaf35b0
[ 195.342962] udevd[2315]: seq 3215 processed
[ 195.343044] udevd[597]: passed 281 byte device to netlink monitor 0xae2130
[ 195.343379] udevd[2315]: seq 3216 running
[ 195.356321] udevd[2315]: passed device to netlink monitor 0xaf35b0
[ 195.356329] udevd[2315]: seq 3216 processed
[ 198.360090] udevd[597]: cleanup idle workers
[ 198.360212] udevd[597]: Validate module index
[ 198.360435] udevd[2315]: Unload module index
[ 198.360485] udevd[2311]: Unload module index
[ 198.361128] udevd[2313]: Unload module index
[ 198.361452] udevd[597]: worker [2311] exited
[ 198.361492] udevd[597]: worker [2313] exited
[ 198.361512] udevd[597]: worker [2315] exited
[linux-4.4.221]$ udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent
KERNEL[179.968349] add /devices/pci0000:00/0000:00:14.0/usb2/2-2 (usb)
KERNEL[179.971025] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0 (usb)
KERNEL[179.971803] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9 (scsi)
KERNEL[179.971845] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/scsi_host/host9 (scsi_host)
UDEV [180.007808] add /devices/pci0000:00/0000:00:14.0/usb2/2-2 (usb)
UDEV [180.014520] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0 (usb)
UDEV [180.015556] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9 (scsi)
UDEV [180.016946] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/scsi_host/host9 (scsi_host)
KERNEL[181.235551] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0 (scsi)
KERNEL[181.235643] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0 (scsi)
KERNEL[181.235693] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/scsi_disk/9:0:0:0 (scsi_disk)
KERNEL[181.235859] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/scsi_device/9:0:0:0 (scsi_devic
e)
KERNEL[181.237516] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/bsg/9:0:0:0 (bsg)
UDEV [181.237558] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0 (scsi)
UDEV [181.239223] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0 (scsi)
UDEV [181.241877] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/scsi_disk/9:0:0:0 (scsi_disk)
KERNEL[181.245467] add /devices/virtual/bdi/8:32 (bdi)
UDEV [181.245520] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/bsg/9:0:0:0 (bsg)
UDEV [181.246144] add /devices/virtual/bdi/8:32 (bdi)
UDEV [181.246733] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/scsi_device/9:0:0:0 (scsi_device)
KERNEL[181.252544] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc (block)
KERNEL[181.252618] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc/sdc1 (block)
KERNEL[181.252665] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc/sdc2 (block)
UDEV [181.324316] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc (block)
UDEV [181.393395] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc/sdc1 (block)
UDEV [181.448493] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc/sdc2 (block)
KERNEL[192.491802] change /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc (block)
KERNEL[192.495169] remove /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc/sdc1 (block)
UDEV [192.535497] remove /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc/sdc2 (block)
KERNEL[195.292684] remove /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/bsg/9:0:0:0 (bsg)
KERNEL[195.292758] remove /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/scsi_device/9:0:0:0 (scsi_device)
KERNEL[195.292803] remove /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/scsi_disk/9:0:0:0 (scsi_disk)
UDEV [195.297493] remove /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/bsg/9:0:0:0 (bsg)
UDEV [195.297551] remove /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/scsi_device/9:0:0:0 (scsi_device)
UDEV [195.297583] remove /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/scsi_disk/9:0:0:0 (scsi_disk)
KERNEL[195.298954] remove /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc (block)
UDEV [195.300748] remove /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0/block/sdc (block)
KERNEL[195.302153] remove /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0 (scsi)
UDEV [195.304384] remove /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0/9:0:0:0 (scsi)
KERNEL[195.306367] remove /devices/virtual/bdi/8:32 (bdi)
KERNEL[195.306431] remove /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0 (scsi)
UDEV [195.306823] remove /devices/virtual/bdi/8:32 (bdi)
UDEV [195.307661] remove /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/target9:0:0 (scsi)
KERNEL[195.319442] remove /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/scsi_host/host9 (scsi_host)
KERNEL[195.319509] remove /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9 (scsi)
KERNEL[195.320220] remove /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0 (usb)
KERNEL[195.320662] remove /devices/pci0000:00/0000:00:14.0/usb2/2-2 (usb)
UDEV [195.322037] remove /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9/scsi_host/host9 (scsi_host)
UDEV [195.323158] remove /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host9 (scsi)
UDEV [195.324609] remove /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0 (usb)
UDEV [195.338750] remove /devices/pci0000:00/0000:00:14.0/usb2/2-2 (usb)
[linux-4.4.221]$ lsblk | grep sdc
sdc 8:32 1 14.5G 0 disk
|-sdc1 8:33 1 4G 0 part /run/media/dioput/F200-1CEE
`-sdc2 8:34 1 10.5G 0 part
[-- Attachment #3: linux-5.4.39-compilation_log.txt --]
[-- Type: text/plain, Size: 6454 bytes --]
$ sudo dmesg | grep -i udev
...<snip>...
[ 355.780264] udevd[659]: Validate module index
[ 355.780607] udevd[659]: seq 4158 queued, 'add' 'usb'
[ 355.781220] udevd[659]: seq 4158 forked new worker [2436]
[ 355.782401] udevd[2436]: seq 4158 running
[ 355.782729] udevd[2436]: no db file to read /run/udev/data/c189:257: No such file or directory
[ 355.782856] udevd[2436]: IMPORT builtin 'usb_id' /lib/udev/rules.d/40-libgphoto2.rules:9
[ 355.783937] udevd[659]: seq 4159 queued, 'add' 'usb'
[ 355.784125] udevd[659]: seq 4160 queued, 'bind' 'usb'
[ 355.784754] udevd[2436]: IMPORT builtin skip 'usb_id' /lib/udev/rules.d/50-udev-default.rules:13
[ 355.784765] udevd[2436]: IMPORT builtin 'hwdb' /lib/udev/rules.d/50-udev-default.rules:13
[ 365.648261] udevd[659]: Validate module index
[ 365.648410] udevd[659]: seq 4178 queued, 'remove' 'bsg'
[ 365.648901] udevd[659]: seq 4178 forked new worker [2454]
[ 365.649301] udevd[659]: seq 4179 queued, 'remove' 'scsi_device'
[ 365.649724] udevd[659]: seq 4179 forked new worker [2455]
[ 365.649941] udevd[659]: seq 4180 queued, 'remove' 'scsi_disk'
[ 365.649951] udevd[2454]: seq 4178 running
[ 365.650385] udevd[659]: seq 4180 forked new worker [2456]
[ 365.651134] udevd[2455]: seq 4179 running
[ 365.651236] udevd[2455]: no db file to read /run/udev/data/+scsi_device:5:0:0:0: No such file or directory
$ udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent
KERNEL[355.829048] add /devices/pci0000:00/0000:00:14.0/usb3/3-2 (usb)
KERNEL[355.832118] add /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0 (usb)
KERNEL[355.832388] bind /devices/pci0000:00/0000:00:14.0/usb3/3-2 (usb)
KERNEL[355.919912] add /module/usb_storage (module)
KERNEL[355.921133] add /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5 (scsi)
KERNEL[355.921180] add /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5/scsi_host/host5 (scsi_host)
KERNEL[355.922414] bind /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0 (usb)
KERNEL[355.922461] add /bus/usb/drivers/usb-storage (drivers)
KERNEL[355.933664] add /module/uas (module)
KERNEL[355.933968] add /bus/usb/drivers/uas (drivers)
KERNEL[357.206092] add /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5/target5:0:0 (scsi)
KERNEL[357.206156] add /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5/target5:0:0/5:0:0:0 (scsi)
KERNEL[357.206183] add /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5/target5:0:0/5:0:0:0/scsi_device/5:0:0:0 (scsi_device)
KERNEL[357.206933] add /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5/target5:0:0/5:0:0:0/scsi_disk/5:0:0:0 (scsi_disk)
KERNEL[357.207906] add /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5/target5:0:0/5:0:0:0/bsg/5:0:0:0 (bsg)
KERNEL[357.215925] add /devices/virtual/bdi/8:32 (bdi)
KERNEL[357.220995] add /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5/target5:0:0/5:0:0:0/block/sdc (block)
KERNEL[357.221049] add /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5/target5:0:0/5:0:0:0/block/sdc/sdc1 (block)
KERNEL[357.221078] add /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5/target5:0:0/5:0:0:0/block/sdc/sdc2 (block)
KERNEL[357.223736] bind /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5/target5:0:0/5:0:0:0 (scsi)
KERNEL[365.696363] remove /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5/target5:0:0/5:0:0:0/bsg/5:0:0:0 (bsg)
KERNEL[365.696523] remove /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5/target5:0:0/5:0:0:0/scsi_device/5:0:0:0 (scsi_device)
KERNEL[365.696989] remove /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5/target5:0:0/5:0:0:0/scsi_disk/5:0:0:0 (scsi_disk)
KERNEL[365.703826] change /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5/target5:0:0/5:0:0:0/block/sdc (block)
KERNEL[365.704161] remove /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5/target5:0:0/5:0:0:0/block/sdc/sdc2 (block)
KERNEL[365.704284] remove /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5/target5:0:0/5:0:0:0/block/sdc/sdc1 (block)
KERNEL[365.704740] remove /devices/virtual/bdi/8:32 (bdi)
KERNEL[365.704873] remove /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5/target5:0:0/5:0:0:0/block/sdc (block)
KERNEL[365.712037] unbind /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5/target5:0:0/5:0:0:0 (scsi)
KERNEL[365.712094] remove /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5/target5:0:0/5:0:0:0 (scsi)
KERNEL[365.728351] remove /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5/target5:0:0 (scsi)
KERNEL[365.728419] remove /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5/scsi_host/host5 (scsi_host)
KERNEL[365.728446] remove /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/host5 (scsi)
KERNEL[365.737169] unbind /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0 (usb)
KERNEL[365.737264] remove /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0 (usb)
KERNEL[365.737881] unbind /devices/pci0000:00/0000:00:14.0/usb3/3-2 (usb)
KERNEL[365.737940] remove /devices/pci0000:00/0000:00:14.0/usb3/3-2 (usb)
$ lsblk | grep sdc
sdc 8:32 1 14.5G 0 disk
|-sdc1 8:33 1 4G 0 part
`-sdc2 8:34 1 10.5G 0 part
next prev parent reply other threads:[~2020-05-10 9:48 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-10 2:55 USB Attached SCSI breakage due no udev involvement Dio Putra
2020-05-10 5:47 ` Greg KH
2020-05-10 6:48 ` Dio Putra
2020-05-10 6:54 ` Greg KH
2020-05-10 7:10 ` Dio Putra
2020-05-10 7:32 ` Greg KH
2020-05-10 8:35 ` Dio Putra
2020-05-10 8:48 ` Greg KH
2020-05-10 9:48 ` Dio Putra [this message]
2020-05-10 13:15 ` Dio Putra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=80d4f4d9-91be-b7e8-1f64-13c2fe74f496@gmail.com \
--to=dioput12@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=oneukum@suse.com \
--cc=stern@rowland.harvard.edu \
--cc=usb-storage@lists.one-eyed-alien.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).