linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Wan Zongshun <vw@iommu.org>
To: Baoquan He <bhe@redhat.com>, joro@8bytes.org
Cc: linux-kernel@vger.kernel.org, vincent.wan@amd.com,
	iommu@lists.linux-foundation.org, dyoung@redhat.com
Subject: Re: [Patch v4 6/9] iommu/amd: Add function copy_dev_tables
Date: Sat, 28 May 2016 21:08:34 +0800	[thread overview]
Message-ID: <80e8478c-3797-df49-3bf9-e3c5d6879c8b@iommu.org> (raw)
In-Reply-To: <1464157735-8865-7-git-send-email-bhe@redhat.com>



-------- Original Message --------
> Add function copy_dev_tables to copy old DTE of the 1st kernel to
> the new DTE table. Since all iommu share the same DTE table the
> copy only need be done once as long as the physical address of
> old DTE table is retrieved from iommu reg. Besides the old domain
> id occupied in 1st kernel need be reserved in order to avoid touch
> the old translation tables.
>
> Signed-off-by: Baoquan He <bhe@redhat.com>
> ---
>  drivers/iommu/amd_iommu.c       |  2 +-
>  drivers/iommu/amd_iommu_init.c  | 38 ++++++++++++++++++++++++++++++++++++++
>  drivers/iommu/amd_iommu_types.h |  1 +
>  3 files changed, 40 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
> index 1c916cc..f3bd7fd 100644
> --- a/drivers/iommu/amd_iommu.c
> +++ b/drivers/iommu/amd_iommu.c
> @@ -2081,7 +2081,7 @@ static void set_dte_entry(u16 devid, struct protection_domain *domain, bool ats)
>  		flags    |= tmp;
>  	}
>
> -	flags &= ~(0xffffUL);
> +	flags &= ~DEV_DOMID_MASK;
>  	flags |= domain->id;
>
>  	amd_iommu_dev_table[devid].data[1]  = flags;
> diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
> index 9c1aa54..71c7ac9 100644
> --- a/drivers/iommu/amd_iommu_init.c
> +++ b/drivers/iommu/amd_iommu_init.c
> @@ -664,6 +664,44 @@ static int get_dev_entry_bit(u16 devid, u8 bit)
>  }
>
>
> +static int copy_dev_tables(void)
> +{
> +	u64 entry;
> +	u32 lo, hi, devid;
> +	phys_addr_t old_devtb_phys;
> +	struct dev_table_entry *old_devtb;
> +	u16 dom_id, dte_v;
> +	struct amd_iommu *iommu;
> +	static int copied;
> +
> +        for_each_iommu(iommu) {
> +		if (!translation_pre_enabled()) {
> +			pr_err("IOMMU:%d is not pre-enabled!/n", iommu->index);
> +			return -1;
> +		}

If one iommu is not pre-enabled, all iommus will be exit the copy.

> +
> +		if (copied)
> +			continue;
> +
> +                lo = readl(iommu->mmio_base + MMIO_DEV_TABLE_OFFSET);
> +                hi = readl(iommu->mmio_base + MMIO_DEV_TABLE_OFFSET + 4);
> +                entry = (((u64) hi) << 32) + lo;
> +                old_devtb_phys = entry & PAGE_MASK;
> +                old_devtb = memremap(old_devtb_phys, dev_table_size, MEMREMAP_WB);
> +                for (devid = 0; devid <= amd_iommu_last_bdf; ++devid) {
> +                        amd_iommu_dev_table[devid] = old_devtb[devid];
> +                        dom_id = amd_iommu_dev_table[devid].data[1] & DEV_DOMID_MASK;
> +			dte_v = amd_iommu_dev_table[devid].data[0] & DTE_FLAG_V;
> +			if (!dte_v)
> +				continue;
> +                        __set_bit(dom_id, amd_iommu_pd_alloc_bitmap);
> +                }
> +		memunmap(old_devtb);
> +		copied = 1;
> +        }
> +	return 0;
> +}
> +
>  void amd_iommu_apply_erratum_63(u16 devid)
>  {
>  	int sysmgt;
> diff --git a/drivers/iommu/amd_iommu_types.h b/drivers/iommu/amd_iommu_types.h
> index 7796edf..34acd73 100644
> --- a/drivers/iommu/amd_iommu_types.h
> +++ b/drivers/iommu/amd_iommu_types.h
> @@ -311,6 +311,7 @@
>  #define DTE_FLAG_MASK	(0x3ffULL << 32)
>  #define DTE_GLX_SHIFT	(56)
>  #define DTE_GLX_MASK	(3)
> +#define DEV_DOMID_MASK 	0xffffULL
>
>  #define DTE_GCR3_VAL_A(x)	(((x) >> 12) & 0x00007ULL)
>  #define DTE_GCR3_VAL_B(x)	(((x) >> 15) & 0x0ffffULL)
>

  reply	other threads:[~2016-05-28 13:08 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-25  6:28 [Patch v4 0/9] *** Fix kdump failure in system with amd iommu*** Baoquan He
2016-05-25  6:28 ` [Patch v4 1/9] iommu/amd: clean up the cmpxchg64 invocation Baoquan He
2016-05-25  6:28 ` [Patch v4 2/9] iommu/amd: Use standard bitmap operation to set bitmap Baoquan He
2016-05-25  6:28 ` [Patch v4 3/9] iommu/amd: Detect pre enabled translation Baoquan He
2016-05-28 12:49   ` Wan Zongshun
2016-05-30  3:24     ` Baoquan He
2016-05-30  3:27       ` Baoquan He
2016-05-25  6:28 ` [Patch v4 4/9] iommu/amd: add early_enable_iommu() helper function Baoquan He
2016-05-25  6:28 ` [Patch v4 5/9] iommu/amd: Define bit fields for DTE particularly Baoquan He
2016-05-25  6:28 ` [Patch v4 6/9] iommu/amd: Add function copy_dev_tables Baoquan He
2016-05-28 13:08   ` Wan Zongshun [this message]
2016-05-30  3:32     ` Baoquan He
2016-05-25  6:28 ` [Patch v4 7/9] iommu/amd: copy old trans table from old kernel Baoquan He
2016-05-28 13:25   ` Wan Zongshun
2016-05-25  6:28 ` [Patch v4 8/9] iommu/amd: Do not initialize dev tables again in kdump Baoquan He
2016-05-25  6:28 ` [Patch v4 9/9] iommu/amd: Check the validation of irq table and domain id Baoquan He
2016-05-28 13:30   ` Wan Zongshun
2016-05-30  5:10     ` Baoquan He
2016-05-25  7:02 ` [Patch v4 0/9] *** Fix kdump failure in system with amd iommu*** Baoquan He
2016-05-25  7:15   ` Baoquan He

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=80e8478c-3797-df49-3bf9-e3c5d6879c8b@iommu.org \
    --to=vw@iommu.org \
    --cc=bhe@redhat.com \
    --cc=dyoung@redhat.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vincent.wan@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).