linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yi Li <yi1.li@linux.intel.com>
To: matthew.gerlach@linux.intel.com, Anatolij Gustschin <agust@denx.de>
Cc: linux-fpga@vger.kernel.org,
	Alan Tull <atull@opensource.altera.com>,
	Moritz Fischer <moritz.fischer@ettus.com>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3] fpga manager: Add Altera CvP driver
Date: Tue, 25 Apr 2017 11:49:23 -0500	[thread overview]
Message-ID: <8112fa5e-299f-27fa-b3b7-4a42866ba6c1@linux.intel.com> (raw)
In-Reply-To: <8178cbaa-0f36-5553-dfa0-3286ae10ddce@linux.intel.com>

hi Anatolij


On 04/21/2017 04:14 PM, Li, Yi wrote:
>
> On 4/20/2017 12:29 PM, matthew.gerlach@linux.intel.com wrote:
>>
>>
>> On Thu, 20 Apr 2017, Anatolij Gustschin wrote:
>>
>>> Add FPGA manager driver for loading Arria/Cyclone/Stratix
>>> FPGAs via CvP.
>>>
>>> Signed-off-by: Anatolij Gustschin <agust@denx.de>
>>> ---
>>
>> Hi Anatolij,
>>
>> Since you say the driver works with Arria-10, I thought I would give 
>> it a try with the Altera Arria10 PCIe DevKit I am using.  I successfully
>> compiled your patch as an out of tree module against a 3.10 kernel.  
>> The module successfully loaded and created instances for both boards 
>> in the host.
>> Now that I have the driver instances running, I'm not sure howto 
>> actually perform CvP.  Do you use a debugfs interface or something 
>> else?  Do you use the sof or an rbf file?
>>
>> Thanks,
>> Matthew Gerlach
>>
>>> Changes in v3:
>>>
>>>  - removed V-series from description (since the driver works
>>>    also with Arria-10). Also renamed functions, config option
>>>    and driver file name. Changed module description in Kconfig
> From the User guild 
> https://www.altera.com/documentation/dsu1441819344145.html#dsu1442261652730, 
> it says Configuration via Protocol (CvP) is a configuration scheme 
> supported inArria^® V,Cyclone^® V,Stratix^® V, andArria^® 10device 
> families. But I have seen different CvP registers bitmask defines 
> somewhere else, so I am not positive that there is only one CvP 
> protocol for all Altera FPGAs. Maybe we could put those Vs + Arria 10 
> as supported devices on the Kconfig file on the safe side?

Reviewed the rest of the driver and it looks good to me.

>
>>> ...
>>>
>>> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
>>> index 161ba9d..be48c2e 100644
>>> --- a/drivers/fpga/Kconfig
>>> +++ b/drivers/fpga/Kconfig
>>> @@ -26,6 +26,13 @@ config FPGA_MGR_ICE40_SPI
>>>     help
>>>       FPGA manager driver support for Lattice iCE40 FPGAs over SPI.
>>>
>>> +config FPGA_MGR_ALTERA_CVP
>>> +    tristate "Altera Arria/Cyclone/Stratix CvP FPGA Manager"
>>> +    depends on PCI
>>> +    help
>>> +      FPGA manager driver support for Altera FPGAs using the
>>> +      CvP interface over PCIe.
>>> +
>>> config FPGA_MGR_SOCFPGA
>>>     tristate "Altera SOCFPGA FPGA Manager"
>>>     depends on ARCH_SOCFPGA || COMPILE_TEST
>>> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
>>> index 2a4f021..2e5c8b6 100644
>>> --- a/drivers/fpga/Makefile
>>> +++ b/drivers/fpga/Makefile
>>> @@ -6,6 +6,7 @@
>>> obj-$(CONFIG_FPGA)            += fpga-mgr.o
> ...

  reply	other threads:[~2017-04-25 16:54 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-20 14:58 [PATCH v3] fpga manager: Add Altera CvP driver Anatolij Gustschin
2017-04-20 17:29 ` matthew.gerlach
2017-04-20 17:47   ` Anatolij Gustschin
2017-04-21 21:14   ` Li, Yi
2017-04-25 16:49     ` Yi Li [this message]
2017-04-26 16:36     ` Anatolij Gustschin
2017-04-26 17:10 ` Alan Tull

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8112fa5e-299f-27fa-b3b7-4a42866ba6c1@linux.intel.com \
    --to=yi1.li@linux.intel.com \
    --cc=agust@denx.de \
    --cc=atull@opensource.altera.com \
    --cc=linux-fpga@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=matthew.gerlach@linux.intel.com \
    --cc=moritz.fischer@ettus.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).