[PATCH v3 4/4] ACPI: processor: thermal: Update CPU cooling devices on cpufreq policy changes

["Rafael J. Wysocki" <rjw@rjwysocki.net>]

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

When a cpufreq policy appears or goes away, the CPU cooling devices for
the CPUs covered by that policy need to be updated so that the new
processor_get_max_state() value is stored as max_state and the
statistics in sysfs are rearranged for each of them.

Do that accordingly in acpi_thermal_cpufreq_init() and
acpi_thermal_cpufreq_exit().

Fixes: a365105c685c("thermal: sysfs: Reuse cdev->max_state")
Reported-by: Wang, Quanxian <quanxian.wang@intel.com>
Link: https://lore.kernel.org/linux-pm/53ec1f06f61c984100868926f282647e57ecfb2d.camel@intel.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
---

v2 -> v3: Add tags from Rui.

v1 -> v2: Remove the now redundant IS_ERR() checks on cdev before calling
          thermal_cooling_device_update().

---
 drivers/acpi/processor_thermal.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

Index: linux-pm/drivers/acpi/processor_thermal.c
===================================================================
--- linux-pm.orig/drivers/acpi/processor_thermal.c
+++ linux-pm/drivers/acpi/processor_thermal.c
@@ -140,9 +140,13 @@ void acpi_thermal_cpufreq_init(struct cp
 		ret = freq_qos_add_request(&policy->constraints,
 					   &pr->thermal_req,
 					   FREQ_QOS_MAX, INT_MAX);
-		if (ret < 0)
+		if (ret < 0) {
 			pr_err("Failed to add freq constraint for CPU%d (%d)\n",
 			       cpu, ret);
+			continue;
+		}
+
+		thermal_cooling_device_update(pr->cdev);
 	}
 }
 
@@ -153,8 +157,12 @@ void acpi_thermal_cpufreq_exit(struct cp
 	for_each_cpu(cpu, policy->related_cpus) {
 		struct acpi_processor *pr = per_cpu(processors, cpu);
 
-		if (pr)
-			freq_qos_remove_request(&pr->thermal_req);
+		if (!pr)
+			continue;
+
+		freq_qos_remove_request(&pr->thermal_req);
+
+		thermal_cooling_device_update(pr->cdev);
 	}
 }
 #else				/* ! CONFIG_CPU_FREQ */