From: Akira Tsukamoto <akira.tsukamoto@gmail.com>
To: "Paul Walmsley" <paul.walmsley@sifive.com>,
"Palmer Dabbelt" <palmer@dabbelt.com>,
"Albert Ou" <aou@eecs.berkeley.edu>,
"Atish Patra" <atish.patra@wdc.com>,
"Anup Patel" <anup.patel@wdc.com>,
"Emil Renner Berthing" <kernel@esmil.dk>,
"Björn Töpel" <bjorn@kernel.org>,
"Sagar Shrikant Kadam" <sagar.kadam@sifive.com>,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/1] config: Enable jh7100 SoC
Date: Wed, 23 Jun 2021 21:46:54 +0900 [thread overview]
Message-ID: <82328d90-2769-6bd0-a28e-b501fba63d76@gmail.com> (raw)
In-Reply-To: <f22f6d7e-97ab-85db-5448-c2bcef0ea0e7@gmail.com>
Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com>
---
arch/riscv/configs/defconfig | 105 +++++++++++++++++++++++++++++++++++
1 file changed, 105 insertions(+)
diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index 1f2be234b11c..e07d26d2743c 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -138,3 +138,108 @@ CONFIG_DEBUG_BLOCK_EXT_DEVT=y
CONFIG_MEMTEST=y
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_EFI=y
+CONFIG_FB_STARFIVE=y
+CONFIG_FB_STARFIVE_HDMI_ADV7513=y
+CONFIG_FB_STARFIVE_HDMI_TDA998X=y
+CONFIG_FB_STARFIVE_SEEED5INCH=y
+CONFIG_FB_STARFIVE_VIDEO=y
+CONFIG_HW_RANDOM_STARFIVE_VIC=y
+CONFIG_SOC_STARFIVE_VIC7100=y
+CONFIG_FPGA_GMAC_FLUSH_DDR=y
+CONFIG_MMC_DW_FLUSH_DDR=y
+CONFIG_USB_CDNS3_HOST_FLUSH_DMA=y
+CONFIG_SOC_STARFIVE_VIC7100_I2C_GPIO=y
+CONFIG_VIDEO_STARFIVE_VIN=y
+CONFIG_VIDEO_STARFIVE_VIN_SENSOR_IMX219=y
+CONFIG_VIDEO_STARFIVE_VIN_SENSOR_OV5640=y
+CONFIG_VIDEO_STARFIVE_VIN_SENSOR_SC2235=y
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+CONFIG_LOG_CPU_MAX_BUF_SHIFT=15
+CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+CONFIG_EFI_BOOTLOADER_CONTROL=y
+CONFIG_BLK_PM=y
+CONFIG_IOSCHED_BFQ=y
+CONFIG_KSM=y
+CONFIG_CMA=y
+CONFIG_CMA_AREAS=7
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_IRQ=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_PARTITIONED_MASTER=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y
+CONFIG_BLK_DEV_NBD=y
+CONFIG_INPUT_LEDS=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250_DMA=y
+CONFIG_SERIAL_8250_DWLIB=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_DESIGNWARE_CORE=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI_MEM=y
+CONFIG_SPI_CADENCE_QUADSPI=y
+CONFIG_SPI_DESIGNWARE=y
+CONFIG_SPI_DW_DMA=y
+CONFIG_SPI_DW_MMIO=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_STARFIVE_VIC=y
+CONFIG_GPIO_TPS65086=y
+CONFIG_POWER_RESET_TPS65086=y
+CONFIG_MFD_TPS65086=y
+CONFIG_USB_HID=y
+CONFIG_USB_CDNS_SUPPORT=y
+CONFIG_USB_CDNS_HOST=y
+CONFIG_USB_CDNS3=y
+CONFIG_USB_CDNS3_HOST=y
+CONFIG_USB_ROLE_SWITCH=y
+CONFIG_SDIO_UART=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_PLTFM=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_DRV_EFI=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_DMA_OF=y
+CONFIG_DW_AXI_DMAC=y
+CONFIG_DW_AXI_DMAC_STARFIVE=y
+CONFIG_COMMON_CLK_SI544=y
+CONFIG_COMMON_CLK_PWM=y
+CONFIG_SIFIVE_L2=y
+CONFIG_SIFIVE_L2_FLUSH=y
+CONFIG_SIFIVE_L2_FLUSH_START=0x80000000
+CONFIG_SIFIVE_L2_FLUSH_SIZE=0x800000000
+CONFIG_SIFIVE_L2_IRQ_DISABLE=y
+CONFIG_PWM=y
+CONFIG_PWM_SYSFS=y
+CONFIG_PWM_SIFIVE_PTC=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_PROC_KCORE=y
+CONFIG_EFIVAR_FS=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=640
+CONFIG_CMA_SIZE_SEL_MBYTES=y
+CONFIG_CMA_ALIGNMENT=8
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=y
+CONFIG_STMMAC_PLATFORM=y
+CONFIG_DWMAC_GENERIC=y
+CONFIG_MICREL_PHY=y
--
2.17.1
next prev parent reply other threads:[~2021-06-23 12:47 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-23 12:45 [RFC PATCH 0/1] Adding jh7100 SoC to defconfig Akira Tsukamoto
2021-06-23 12:46 ` Akira Tsukamoto [this message]
2021-06-23 13:21 ` [PATCH 1/1] config: Enable jh7100 SoC Jisheng Zhang
2021-06-24 14:35 ` Akira Tsukamoto
2021-06-23 19:08 ` Drew Fustini
2021-06-24 14:49 ` Akira Tsukamoto
2021-06-23 18:50 ` [RFC PATCH 0/1] Adding jh7100 SoC to defconfig Drew Fustini
2021-06-24 14:42 ` Akira Tsukamoto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=82328d90-2769-6bd0-a28e-b501fba63d76@gmail.com \
--to=akira.tsukamoto@gmail.com \
--cc=anup.patel@wdc.com \
--cc=aou@eecs.berkeley.edu \
--cc=atish.patra@wdc.com \
--cc=bjorn@kernel.org \
--cc=kernel@esmil.dk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=sagar.kadam@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).