* [PATCH V5 4/4] mmc: host: sdhci-pci: Add Genesys Logic GL975x support
@ 2019-08-20 2:07 Ben Chuang
2019-08-21 12:29 ` Adrian Hunter
0 siblings, 1 reply; 3+ messages in thread
From: Ben Chuang @ 2019-08-20 2:07 UTC (permalink / raw)
To: adrian.hunter, ulf.hansson
Cc: linux-mmc, linux-kernel, johnsonm, ben.chuang, Ben Chuang
From: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Add support for the GL9750 and GL9755 chipsets.
The patches enable v4 mode and wait 5ms after set 1.8V signal enable for
GL9750/GL9755. It fixed the value of SDHCI_MAX_CURRENT register and uses
the vendor tuning flow for GL9750.
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Co-developed-by: Michael K Johnson <johnsonm@danlj.org>
Signed-off-by: Michael K Johnson <johnsonm@danlj.org>
---
drivers/mmc/host/Makefile | 2 +-
drivers/mmc/host/sdhci-pci-core.c | 2 +
drivers/mmc/host/sdhci-pci-gli.c | 381 ++++++++++++++++++++++++++++++
drivers/mmc/host/sdhci-pci.h | 5 +
4 files changed, 389 insertions(+), 1 deletion(-)
create mode 100644 drivers/mmc/host/sdhci-pci-gli.c
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 73578718f119..661445415090 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -13,7 +13,7 @@ obj-$(CONFIG_MMC_MXS) += mxs-mmc.o
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
sdhci-pci-y += sdhci-pci-core.o sdhci-pci-o2micro.o sdhci-pci-arasan.o \
- sdhci-pci-dwc-mshc.o
+ sdhci-pci-dwc-mshc.o sdhci-pci-gli.o
obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-data.o
obj-$(CONFIG_MMC_SDHCI_ACPI) += sdhci-acpi.o
obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 4154ee11b47d..e5835fbf73bc 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -1682,6 +1682,8 @@ static const struct pci_device_id pci_ids[] = {
SDHCI_PCI_DEVICE(O2, SEABIRD1, o2),
SDHCI_PCI_DEVICE(ARASAN, PHY_EMMC, arasan),
SDHCI_PCI_DEVICE(SYNOPSYS, DWC_MSHC, snps),
+ SDHCI_PCI_DEVICE(GLI, 9750, gl9750),
+ SDHCI_PCI_DEVICE(GLI, 9755, gl9755),
SDHCI_PCI_DEVICE_CLASS(AMD, SYSTEM_SDHCI, PCI_CLASS_MASK, amd),
/* Generic SD host controller */
{PCI_DEVICE_CLASS(SYSTEM_SDHCI, PCI_CLASS_MASK)},
diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
new file mode 100644
index 000000000000..99abb7830e62
--- /dev/null
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Genesys Logic, Inc.
+ *
+ * Authors: Ben Chuang <ben.chuang@genesyslogic.com.tw>
+ *
+ * Version: v0.9.0 (2019-08-08)
+ */
+
+#include <linux/pci.h>
+#include <linux/mmc/mmc.h>
+#include <linux/delay.h>
+#include "sdhci.h"
+#include "sdhci-pci.h"
+
+/* Genesys Logic extra registers */
+#define SDHCI_GLI_9750_WT 0x800
+#define SDHCI_GLI_9750_DRIVING 0x860
+#define SDHCI_GLI_9750_PLL 0x864
+#define SDHCI_GLI_9750_SW_CTRL 0x874
+#define SDHCI_GLI_9750_MISC 0x878
+
+#define SDHCI_GLI_9750_TUNING_CONTROL 0x540
+#define SDHCI_GLI_9750_TUNING_PARAMETERS 0x544
+
+#define GLI_MAX_TUNING_LOOP 40
+
+/* Genesys Logic chipset */
+static void gli_set_9750(struct sdhci_host *host)
+{
+ u32 wt_value = 0;
+ u32 driving_value = 0;
+ u32 pll_value = 0;
+ u32 sw_ctrl_value = 0;
+ u32 misc_value = 0;
+ u32 parameter_value = 0;
+ u32 control_value = 0;
+
+ u16 ctrl2 = 0;
+
+ wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
+ if ((wt_value & 0x1) == 0) {
+ wt_value |= 0x1;
+ sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
+ }
+
+ driving_value = sdhci_readl(host, SDHCI_GLI_9750_DRIVING);
+ pll_value = sdhci_readl(host, SDHCI_GLI_9750_PLL);
+ sw_ctrl_value = sdhci_readl(host, SDHCI_GLI_9750_SW_CTRL);
+ misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
+ parameter_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_PARAMETERS);
+ control_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_CONTROL);
+
+ driving_value &= ~(0x0C000FFF);
+ driving_value |= 0x0C000FFF;
+ sdhci_writel(host, driving_value, SDHCI_GLI_9750_DRIVING);
+
+ sw_ctrl_value |= 0xc0;
+ sdhci_writel(host, sw_ctrl_value, SDHCI_GLI_9750_SW_CTRL);
+
+ // reset the tuning flow after reinit and before starting tuning
+ pll_value |= 0x800000; // bit23-1
+ pll_value &= ~(0x00700000); // bit22:20-0
+
+ misc_value &= ~(0x8); // bit3-0
+ misc_value &= ~(0x4); // bit2-0
+
+ misc_value &= ~(0x70); // bit6:4-0
+ misc_value |= 0x50; // bit6:4-5
+
+ parameter_value &= ~(0x7); // bit2:0-0
+ parameter_value |= 0x1; // bit2:0-1
+
+ control_value &= ~(0x190000); // bit20:19-0, bit16-0
+ control_value |= 0x110000; // bit20:19-b10, bit16-1
+
+ sdhci_writel(host, pll_value, SDHCI_GLI_9750_PLL);
+ sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
+
+ // disable tuned clk
+ ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
+ sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
+
+ // 540 enable tuning parameters control
+ control_value |= 0x10;
+ sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
+
+ // write 544 tuning parameters
+ sdhci_writel(host, parameter_value, SDHCI_GLI_9750_TUNING_PARAMETERS);
+
+ // 540 disable tuning parameters control
+ control_value &= ~0x10;
+ sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
+
+ // clear tuned clk
+ ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
+ sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
+
+ udelay(1);
+ wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
+ wt_value &= ~0x1;
+ sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
+}
+
+static void sdhci_gli_do_reset(struct sdhci_host *host, u8 mask)
+{
+ host->ops->reset(host, mask);
+
+ if (mask & SDHCI_RESET_ALL) {
+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
+ if (host->ops->enable_dma)
+ host->ops->enable_dma(host);
+ }
+
+ /* Resetting the controller clears many */
+ host->preset_enabled = false;
+ }
+}
+
+static void sdhci_gli_abort_tuning(struct sdhci_host *host, u32 opcode)
+{
+ sdhci_reset_tuning(host);
+
+ sdhci_gli_do_reset(host, SDHCI_RESET_CMD);
+ sdhci_gli_do_reset(host, SDHCI_RESET_DATA);
+
+ sdhci_end_tuning(host);
+
+ mmc_abort_tuning(host->mmc, opcode);
+}
+
+static void gli_set_9750_rx_inv(struct sdhci_host *host, bool b)
+{
+ u32 wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
+ u32 misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
+
+ if ((wt_value & 0x1) == 0) {
+ wt_value |= 0x1;
+ sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
+ }
+
+ misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
+ if (b) {
+ misc_value |= 0x8;
+ sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
+ } else {
+ misc_value &= ~0x8;
+ sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
+ }
+
+ wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
+ wt_value &= ~0x1;
+ sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
+}
+
+static int __sdhci_execute_tuning_9750(struct sdhci_host *host, u32 opcode)
+{
+ int i;
+ int rx_inv = 0;
+
+ for (rx_inv = 0; rx_inv < 2; rx_inv++) {
+ if (rx_inv & 0x1)
+ gli_set_9750_rx_inv(host, true);
+ else
+ gli_set_9750_rx_inv(host, false);
+
+ sdhci_start_tuning(host);
+
+ for (i = 0; i < GLI_MAX_TUNING_LOOP; i++) {
+ u16 ctrl;
+
+ sdhci_send_tuning(host, opcode);
+
+ if (!host->tuning_done) {
+ if (rx_inv == 1) {
+ pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n",
+ mmc_hostname(host->mmc));
+ sdhci_gli_abort_tuning(host, opcode);
+ return -ETIMEDOUT;
+ }
+ pr_info("%s: Tuning timeout, try next tuning\n",
+ mmc_hostname(host->mmc));
+ sdhci_gli_abort_tuning(host, opcode);
+ break;
+ }
+
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
+ if (ctrl & SDHCI_CTRL_TUNED_CLK)
+ return 0; /* Success! */
+ break;
+ }
+ }
+ }
+
+ pr_info("%s: Tuning failed, falling back to fixed sampling clock\n",
+ mmc_hostname(host->mmc));
+ sdhci_reset_tuning(host);
+ return -EAGAIN;
+}
+
+static int gl9750_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ int err = 0;
+ unsigned int tuning_count = 0;
+ bool hs400_tuning;
+
+ hs400_tuning = host->flags & SDHCI_HS400_TUNING;
+
+ if (host->tuning_mode == SDHCI_TUNING_MODE_1)
+ tuning_count = host->tuning_count;
+
+ /*
+ * The Host Controller needs tuning in case of SDR104 and DDR50
+ * mode, and for SDR50 mode when Use Tuning for SDR50 is set in
+ * the Capabilities register.
+ * If the Host Controller supports the HS200 mode then the
+ * tuning function has to be executed.
+ */
+ switch (host->timing) {
+ /* HS400 tuning is done in HS200 mode */
+ case MMC_TIMING_MMC_HS400:
+ err = -EINVAL;
+ goto out;
+
+ case MMC_TIMING_MMC_HS200:
+ /*
+ * Periodic re-tuning for HS400 is not expected to be needed, so
+ * disable it here.
+ */
+ if (hs400_tuning)
+ tuning_count = 0;
+ break;
+
+ case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_UHS_DDR50:
+ break;
+ case MMC_TIMING_UHS_SDR50:
+ if (host->flags & SDHCI_SDR50_NEEDS_TUNING)
+ break;
+ /* FALLTHROUGH */
+
+ default:
+ goto out;
+ }
+
+ if (host->ops->platform_execute_tuning) {
+ err = host->ops->platform_execute_tuning(host, opcode);
+ goto out;
+ }
+
+ host->mmc->retune_period = tuning_count;
+
+ if (host->tuning_delay < 0)
+ host->tuning_delay = opcode == MMC_SEND_TUNING_BLOCK;
+
+ gli_set_9750(host);
+ host->tuning_err = __sdhci_execute_tuning_9750(host, opcode);
+
+ sdhci_end_tuning(host);
+out:
+ host->flags &= ~SDHCI_HS400_TUNING;
+
+ return err;
+}
+
+static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
+{
+ struct sdhci_host *host = slot->host;
+ struct mmc_host_ops *ops = &host->mmc_host_ops;
+
+ slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
+ sdhci_enable_v4_mode(host);
+
+ ops->execute_tuning = gl9750_execute_tuning;
+
+ return 0;
+}
+
+static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot)
+{
+ struct sdhci_host *host = slot->host;
+
+ slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
+ sdhci_enable_v4_mode(host);
+
+ return 0;
+}
+
+static void sdhci_gli_voltage_switch(struct sdhci_host *host)
+{
+ usleep_range(5000, 5500);
+}
+
+static void sdhci_gli_pci_hw_reset(struct sdhci_host *host)
+{
+ struct sdhci_pci_slot *slot = sdhci_priv(host);
+
+ if (slot->hw_reset)
+ slot->hw_reset(host);
+}
+
+static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask)
+{
+ ktime_t timeout;
+
+ sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
+
+ if (mask & SDHCI_RESET_ALL)
+ host->clock = 0;
+
+ /* Wait max 100 ms */
+ timeout = ktime_add_ms(ktime_get(), 100);
+
+ /* hw clears the bit when it's done */
+ while (1) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ if (!(sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask))
+ break;
+ if (timedout) {
+ pr_err("%s: Reset 0x%x never completed.\n",
+ mmc_hostname(host->mmc), (int)mask);
+ sdhci_dumpregs(host);
+ return;
+ }
+ udelay(10);
+ }
+ gli_set_9750(host);
+}
+
+static u32 sdhci_gl9750_readl(struct sdhci_host *host, int reg)
+{
+ u32 value;
+
+ value = readl(host->ioaddr + reg);
+ if (unlikely(reg == SDHCI_MAX_CURRENT)) {
+ if (!(value & 0xff))
+ value |= 0xc8;
+ }
+ return value;
+}
+
+static const struct sdhci_ops sdhci_gl9755_ops = {
+ .set_clock = sdhci_set_clock,
+ .enable_dma = sdhci_pci_enable_dma,
+ .set_bus_width = sdhci_set_bus_width,
+ .reset = sdhci_reset,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .hw_reset = sdhci_gli_pci_hw_reset,
+ .voltage_switch = sdhci_gli_voltage_switch,
+};
+
+const struct sdhci_pci_fixes sdhci_gl9755 = {
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
+ .probe_slot = gli_probe_slot_gl9755,
+ .ops = &sdhci_gl9755_ops,
+};
+
+static const struct sdhci_ops sdhci_gl9750_ops = {
+ .read_l = sdhci_gl9750_readl,
+ .set_clock = sdhci_set_clock,
+ .enable_dma = sdhci_pci_enable_dma,
+ .set_bus_width = sdhci_set_bus_width,
+ .reset = sdhci_gl9750_reset,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .hw_reset = sdhci_gli_pci_hw_reset,
+ .voltage_switch = sdhci_gli_voltage_switch,
+};
+
+const struct sdhci_pci_fixes sdhci_gl9750 = {
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
+ .probe_slot = gli_probe_slot_gl9750,
+ .ops = &sdhci_gl9750_ops,
+};
+
diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
index e5dc6e44c7a4..738ba5afcc20 100644
--- a/drivers/mmc/host/sdhci-pci.h
+++ b/drivers/mmc/host/sdhci-pci.h
@@ -65,6 +65,9 @@
#define PCI_DEVICE_ID_SYNOPSYS_DWC_MSHC 0xc202
+#define PCI_DEVICE_ID_GLI_9755 0x9755
+#define PCI_DEVICE_ID_GLI_9750 0x9750
+
/*
* PCI device class and mask
*/
@@ -185,5 +188,7 @@ int sdhci_pci_enable_dma(struct sdhci_host *host);
extern const struct sdhci_pci_fixes sdhci_arasan;
extern const struct sdhci_pci_fixes sdhci_snps;
extern const struct sdhci_pci_fixes sdhci_o2;
+extern const struct sdhci_pci_fixes sdhci_gl9750;
+extern const struct sdhci_pci_fixes sdhci_gl9755;
#endif /* __SDHCI_PCI_H */
--
2.22.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH V5 4/4] mmc: host: sdhci-pci: Add Genesys Logic GL975x support
2019-08-20 2:07 [PATCH V5 4/4] mmc: host: sdhci-pci: Add Genesys Logic GL975x support Ben Chuang
@ 2019-08-21 12:29 ` Adrian Hunter
2019-08-22 2:26 ` Ben Chuang
0 siblings, 1 reply; 3+ messages in thread
From: Adrian Hunter @ 2019-08-21 12:29 UTC (permalink / raw)
To: Ben Chuang, ulf.hansson; +Cc: linux-mmc, linux-kernel, johnsonm, ben.chuang
On 20/08/19 5:07 AM, Ben Chuang wrote:
> From: Ben Chuang <ben.chuang@genesyslogic.com.tw>
>
> Add support for the GL9750 and GL9755 chipsets.
>
> The patches enable v4 mode and wait 5ms after set 1.8V signal enable for
> GL9750/GL9755. It fixed the value of SDHCI_MAX_CURRENT register and uses
> the vendor tuning flow for GL9750.
>
> Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> Co-developed-by: Michael K Johnson <johnsonm@danlj.org>
> Signed-off-by: Michael K Johnson <johnsonm@danlj.org>
> ---
> drivers/mmc/host/Makefile | 2 +-
> drivers/mmc/host/sdhci-pci-core.c | 2 +
> drivers/mmc/host/sdhci-pci-gli.c | 381 ++++++++++++++++++++++++++++++
> drivers/mmc/host/sdhci-pci.h | 5 +
> 4 files changed, 389 insertions(+), 1 deletion(-)
> create mode 100644 drivers/mmc/host/sdhci-pci-gli.c
>
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index 73578718f119..661445415090 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -13,7 +13,7 @@ obj-$(CONFIG_MMC_MXS) += mxs-mmc.o
> obj-$(CONFIG_MMC_SDHCI) += sdhci.o
> obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
> sdhci-pci-y += sdhci-pci-core.o sdhci-pci-o2micro.o sdhci-pci-arasan.o \
> - sdhci-pci-dwc-mshc.o
> + sdhci-pci-dwc-mshc.o sdhci-pci-gli.o
> obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-data.o
> obj-$(CONFIG_MMC_SDHCI_ACPI) += sdhci-acpi.o
> obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o
> diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
> index 4154ee11b47d..e5835fbf73bc 100644
> --- a/drivers/mmc/host/sdhci-pci-core.c
> +++ b/drivers/mmc/host/sdhci-pci-core.c
> @@ -1682,6 +1682,8 @@ static const struct pci_device_id pci_ids[] = {
> SDHCI_PCI_DEVICE(O2, SEABIRD1, o2),
> SDHCI_PCI_DEVICE(ARASAN, PHY_EMMC, arasan),
> SDHCI_PCI_DEVICE(SYNOPSYS, DWC_MSHC, snps),
> + SDHCI_PCI_DEVICE(GLI, 9750, gl9750),
> + SDHCI_PCI_DEVICE(GLI, 9755, gl9755),
> SDHCI_PCI_DEVICE_CLASS(AMD, SYSTEM_SDHCI, PCI_CLASS_MASK, amd),
> /* Generic SD host controller */
> {PCI_DEVICE_CLASS(SYSTEM_SDHCI, PCI_CLASS_MASK)},
> diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> new file mode 100644
> index 000000000000..99abb7830e62
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-pci-gli.c
> @@ -0,0 +1,381 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Genesys Logic, Inc.
> + *
> + * Authors: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> + *
> + * Version: v0.9.0 (2019-08-08)
> + */
> +
> +#include <linux/pci.h>
> +#include <linux/mmc/mmc.h>
> +#include <linux/delay.h>
> +#include "sdhci.h"
> +#include "sdhci-pci.h"
> +
> +/* Genesys Logic extra registers */
> +#define SDHCI_GLI_9750_WT 0x800
> +#define SDHCI_GLI_9750_DRIVING 0x860
> +#define SDHCI_GLI_9750_PLL 0x864
> +#define SDHCI_GLI_9750_SW_CTRL 0x874
> +#define SDHCI_GLI_9750_MISC 0x878
> +
> +#define SDHCI_GLI_9750_TUNING_CONTROL 0x540
> +#define SDHCI_GLI_9750_TUNING_PARAMETERS 0x544
> +
> +#define GLI_MAX_TUNING_LOOP 40
> +
> +/* Genesys Logic chipset */
> +static void gli_set_9750(struct sdhci_host *host)
> +{
> + u32 wt_value = 0;
> + u32 driving_value = 0;
> + u32 pll_value = 0;
> + u32 sw_ctrl_value = 0;
> + u32 misc_value = 0;
> + u32 parameter_value = 0;
> + u32 control_value = 0;
> +
> + u16 ctrl2 = 0;
> +
> + wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
> + if ((wt_value & 0x1) == 0) {
> + wt_value |= 0x1;
> + sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
> + }
> +
> + driving_value = sdhci_readl(host, SDHCI_GLI_9750_DRIVING);
> + pll_value = sdhci_readl(host, SDHCI_GLI_9750_PLL);
> + sw_ctrl_value = sdhci_readl(host, SDHCI_GLI_9750_SW_CTRL);
> + misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
> + parameter_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_PARAMETERS);
> + control_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_CONTROL);
> +
> + driving_value &= ~(0x0C000FFF);
> + driving_value |= 0x0C000FFF;
> + sdhci_writel(host, driving_value, SDHCI_GLI_9750_DRIVING);
> +
> + sw_ctrl_value |= 0xc0;
> + sdhci_writel(host, sw_ctrl_value, SDHCI_GLI_9750_SW_CTRL);
> +
> + // reset the tuning flow after reinit and before starting tuning
For consistent style, please use C-style comments /* */ rather than //
> + pll_value |= 0x800000; // bit23-1
Please define bit fields and look at using GENMASK(), BIT(), FIELD_GET(),
FIELD_PREP()
> + pll_value &= ~(0x00700000); // bit22:20-0
> +
> + misc_value &= ~(0x8); // bit3-0
> + misc_value &= ~(0x4); // bit2-0
> +
> + misc_value &= ~(0x70); // bit6:4-0
> + misc_value |= 0x50; // bit6:4-5
> +
> + parameter_value &= ~(0x7); // bit2:0-0
> + parameter_value |= 0x1; // bit2:0-1
> +
> + control_value &= ~(0x190000); // bit20:19-0, bit16-0
> + control_value |= 0x110000; // bit20:19-b10, bit16-1
> +
> + sdhci_writel(host, pll_value, SDHCI_GLI_9750_PLL);
> + sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
> +
> + // disable tuned clk
> + ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> + ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
> + sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
> +
> + // 540 enable tuning parameters control
> + control_value |= 0x10;
> + sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
> +
> + // write 544 tuning parameters
> + sdhci_writel(host, parameter_value, SDHCI_GLI_9750_TUNING_PARAMETERS);
> +
> + // 540 disable tuning parameters control
> + control_value &= ~0x10;
> + sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
> +
> + // clear tuned clk
> + ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> + ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
> + sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
> +
> + udelay(1);
> + wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
> + wt_value &= ~0x1;
> + sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
> +}
> +
> +static void sdhci_gli_do_reset(struct sdhci_host *host, u8 mask)
> +{
> + host->ops->reset(host, mask);
> +
> + if (mask & SDHCI_RESET_ALL) {
> + if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
> + if (host->ops->enable_dma)
> + host->ops->enable_dma(host);
> + }
> +
> + /* Resetting the controller clears many */
> + host->preset_enabled = false;
> + }
> +}
> +
> +static void sdhci_gli_abort_tuning(struct sdhci_host *host, u32 opcode)
Pleased export sdhci_abort_tuning() instead.
> +{
> + sdhci_reset_tuning(host);
> +
> + sdhci_gli_do_reset(host, SDHCI_RESET_CMD);
> + sdhci_gli_do_reset(host, SDHCI_RESET_DATA);
> +
> + sdhci_end_tuning(host);
> +
> + mmc_abort_tuning(host->mmc, opcode);
> +}
> +
> +static void gli_set_9750_rx_inv(struct sdhci_host *host, bool b)
> +{
> + u32 wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
> + u32 misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
> +
> + if ((wt_value & 0x1) == 0) {
> + wt_value |= 0x1;
> + sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
> + }
> +
> + misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
> + if (b) {
> + misc_value |= 0x8;
> + sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
> + } else {
> + misc_value &= ~0x8;
> + sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
> + }
> +
> + wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
> + wt_value &= ~0x1;
> + sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
> +}
> +
> +static int __sdhci_execute_tuning_9750(struct sdhci_host *host, u32 opcode)
> +{
> + int i;
> + int rx_inv = 0;
> +
> + for (rx_inv = 0; rx_inv < 2; rx_inv++) {
> + if (rx_inv & 0x1)
> + gli_set_9750_rx_inv(host, true);
> + else
> + gli_set_9750_rx_inv(host, false);
> +
> + sdhci_start_tuning(host);
> +
> + for (i = 0; i < GLI_MAX_TUNING_LOOP; i++) {
> + u16 ctrl;
> +
> + sdhci_send_tuning(host, opcode);
> +
> + if (!host->tuning_done) {
> + if (rx_inv == 1) {
> + pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n",
> + mmc_hostname(host->mmc));
> + sdhci_gli_abort_tuning(host, opcode);
> + return -ETIMEDOUT;
> + }
> + pr_info("%s: Tuning timeout, try next tuning\n",
> + mmc_hostname(host->mmc));
> + sdhci_gli_abort_tuning(host, opcode);
> + break;
> + }
> +
> + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> + if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
> + if (ctrl & SDHCI_CTRL_TUNED_CLK)
> + return 0; /* Success! */
> + break;
> + }
> + }
> + }
> +
> + pr_info("%s: Tuning failed, falling back to fixed sampling clock\n",
> + mmc_hostname(host->mmc));
> + sdhci_reset_tuning(host);
> + return -EAGAIN;
> +}
> +
> +static int gl9750_execute_tuning(struct mmc_host *mmc, u32 opcode)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> + int err = 0;
> + unsigned int tuning_count = 0;
> + bool hs400_tuning;
> +
> + hs400_tuning = host->flags & SDHCI_HS400_TUNING;
> +
> + if (host->tuning_mode == SDHCI_TUNING_MODE_1)
> + tuning_count = host->tuning_count;
> +
> + /*
> + * The Host Controller needs tuning in case of SDR104 and DDR50
> + * mode, and for SDR50 mode when Use Tuning for SDR50 is set in
> + * the Capabilities register.
> + * If the Host Controller supports the HS200 mode then the
> + * tuning function has to be executed.
> + */
> + switch (host->timing) {
> + /* HS400 tuning is done in HS200 mode */
> + case MMC_TIMING_MMC_HS400:
> + err = -EINVAL;
> + goto out;
> +
> + case MMC_TIMING_MMC_HS200:
> + /*
> + * Periodic re-tuning for HS400 is not expected to be needed, so
> + * disable it here.
> + */
> + if (hs400_tuning)
> + tuning_count = 0;
> + break;
> +
> + case MMC_TIMING_UHS_SDR104:
> + case MMC_TIMING_UHS_DDR50:
> + break;
> + case MMC_TIMING_UHS_SDR50:
> + if (host->flags & SDHCI_SDR50_NEEDS_TUNING)
> + break;
> + /* FALLTHROUGH */
> +
> + default:
> + goto out;
> + }
> +
> + if (host->ops->platform_execute_tuning) {
> + err = host->ops->platform_execute_tuning(host, opcode);
> + goto out;
> + }
> +
> + host->mmc->retune_period = tuning_count;
> +
> + if (host->tuning_delay < 0)
> + host->tuning_delay = opcode == MMC_SEND_TUNING_BLOCK;
> +
> + gli_set_9750(host);
> + host->tuning_err = __sdhci_execute_tuning_9750(host, opcode);
> +
> + sdhci_end_tuning(host);
> +out:
> + host->flags &= ~SDHCI_HS400_TUNING;
> +
> + return err;
> +}
> +
> +static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
> +{
> + struct sdhci_host *host = slot->host;
> + struct mmc_host_ops *ops = &host->mmc_host_ops;
> +
> + slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
> + sdhci_enable_v4_mode(host);
> +
> + ops->execute_tuning = gl9750_execute_tuning;
It looks like there would be less duplicated code if you implemented
host->ops->platform_execute_tuning instead of mmc->ops->execute_tuning
> +
> + return 0;
> +}
> +
> +static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot)
> +{
> + struct sdhci_host *host = slot->host;
> +
> + slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
> + sdhci_enable_v4_mode(host);
> +
> + return 0;
> +}
> +
> +static void sdhci_gli_voltage_switch(struct sdhci_host *host)
> +{
> + usleep_range(5000, 5500);
> +}
> +
> +static void sdhci_gli_pci_hw_reset(struct sdhci_host *host)
> +{
> + struct sdhci_pci_slot *slot = sdhci_priv(host);
> +
> + if (slot->hw_reset)
> + slot->hw_reset(host);
> +}
> +
> +static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask)
> +{
> + ktime_t timeout;
> +
> + sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
> +
> + if (mask & SDHCI_RESET_ALL)
> + host->clock = 0;
> +
> + /* Wait max 100 ms */
> + timeout = ktime_add_ms(ktime_get(), 100);
> +
> + /* hw clears the bit when it's done */
> + while (1) {
> + bool timedout = ktime_after(ktime_get(), timeout);
> +
> + if (!(sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask))
> + break;
> + if (timedout) {
> + pr_err("%s: Reset 0x%x never completed.\n",
> + mmc_hostname(host->mmc), (int)mask);
> + sdhci_dumpregs(host);
> + return;
> + }
> + udelay(10);
> + }
Please call sdhci_reset() instead of duplicating the code above.
> + gli_set_9750(host);
> +}
> +
> +static u32 sdhci_gl9750_readl(struct sdhci_host *host, int reg)
> +{
> + u32 value;
> +
> + value = readl(host->ioaddr + reg);
> + if (unlikely(reg == SDHCI_MAX_CURRENT)) {
> + if (!(value & 0xff))
> + value |= 0xc8;
> + }
> + return value;
> +}
> +
> +static const struct sdhci_ops sdhci_gl9755_ops = {
> + .set_clock = sdhci_set_clock,
> + .enable_dma = sdhci_pci_enable_dma,
> + .set_bus_width = sdhci_set_bus_width,
> + .reset = sdhci_reset,
> + .set_uhs_signaling = sdhci_set_uhs_signaling,
> + .hw_reset = sdhci_gli_pci_hw_reset,
You never set slot->hw_reset so it doesn't look like .hw_reset is needed
> + .voltage_switch = sdhci_gli_voltage_switch,
> +};
> +
> +const struct sdhci_pci_fixes sdhci_gl9755 = {
> + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
> + .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
> + .probe_slot = gli_probe_slot_gl9755,
> + .ops = &sdhci_gl9755_ops,
> +};
> +
> +static const struct sdhci_ops sdhci_gl9750_ops = {
> + .read_l = sdhci_gl9750_readl,
You need CONFIG_MMC_SDHCI_IO_ACCESSORS for read_l i.e.
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 14d89a108edd..c3bd967d8a1a 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -94,6 +94,7 @@ config MMC_SDHCI_PCI
depends on MMC_SDHCI && PCI
select MMC_CQHCI
select IOSF_MBI if X86
+ select MMC_SDHCI_IO_ACCESSORS
help
This selects the PCI Secure Digital Host Controller Interface.
Most controllers found today are PCI devices.
> + .set_clock = sdhci_set_clock,
> + .enable_dma = sdhci_pci_enable_dma,
> + .set_bus_width = sdhci_set_bus_width,
> + .reset = sdhci_gl9750_reset,
> + .set_uhs_signaling = sdhci_set_uhs_signaling,
> + .hw_reset = sdhci_gli_pci_hw_reset,
> + .voltage_switch = sdhci_gli_voltage_switch,
> +};
> +
> +const struct sdhci_pci_fixes sdhci_gl9750 = {
> + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
> + .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
> + .probe_slot = gli_probe_slot_gl9750,
> + .ops = &sdhci_gl9750_ops,
> +};
> +
> diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
> index e5dc6e44c7a4..738ba5afcc20 100644
> --- a/drivers/mmc/host/sdhci-pci.h
> +++ b/drivers/mmc/host/sdhci-pci.h
> @@ -65,6 +65,9 @@
>
> #define PCI_DEVICE_ID_SYNOPSYS_DWC_MSHC 0xc202
>
> +#define PCI_DEVICE_ID_GLI_9755 0x9755
> +#define PCI_DEVICE_ID_GLI_9750 0x9750
> +
> /*
> * PCI device class and mask
> */
> @@ -185,5 +188,7 @@ int sdhci_pci_enable_dma(struct sdhci_host *host);
> extern const struct sdhci_pci_fixes sdhci_arasan;
> extern const struct sdhci_pci_fixes sdhci_snps;
> extern const struct sdhci_pci_fixes sdhci_o2;
> +extern const struct sdhci_pci_fixes sdhci_gl9750;
> +extern const struct sdhci_pci_fixes sdhci_gl9755;
>
> #endif /* __SDHCI_PCI_H */
>
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH V5 4/4] mmc: host: sdhci-pci: Add Genesys Logic GL975x support
2019-08-21 12:29 ` Adrian Hunter
@ 2019-08-22 2:26 ` Ben Chuang
0 siblings, 0 replies; 3+ messages in thread
From: Ben Chuang @ 2019-08-22 2:26 UTC (permalink / raw)
To: Adrian Hunter
Cc: Ulf Hansson, linux-mmc, linux-kernel, Michael K. Johnson, Ben Chuang
Sorry to resend the email because of non-plain text issues.
On Wed, Aug 21, 2019 at 8:30 PM Adrian Hunter <adrian.hunter@intel.com> wrote:
>
> On 20/08/19 5:07 AM, Ben Chuang wrote:
> > From: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> >
> > Add support for the GL9750 and GL9755 chipsets.
> >
> > The patches enable v4 mode and wait 5ms after set 1.8V signal enable for
> > GL9750/GL9755. It fixed the value of SDHCI_MAX_CURRENT register and uses
> > the vendor tuning flow for GL9750.
> >
> > Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> > Co-developed-by: Michael K Johnson <johnsonm@danlj.org>
> > Signed-off-by: Michael K Johnson <johnsonm@danlj.org>
> > ---
> > drivers/mmc/host/Makefile | 2 +-
> > drivers/mmc/host/sdhci-pci-core.c | 2 +
> > drivers/mmc/host/sdhci-pci-gli.c | 381 ++++++++++++++++++++++++++++++
> > drivers/mmc/host/sdhci-pci.h | 5 +
> > 4 files changed, 389 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/mmc/host/sdhci-pci-gli.c
> >
> > diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> > index 73578718f119..661445415090 100644
> > --- a/drivers/mmc/host/Makefile
> > +++ b/drivers/mmc/host/Makefile
> > @@ -13,7 +13,7 @@ obj-$(CONFIG_MMC_MXS) += mxs-mmc.o
> > obj-$(CONFIG_MMC_SDHCI) += sdhci.o
> > obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
> > sdhci-pci-y += sdhci-pci-core.o sdhci-pci-o2micro.o sdhci-pci-arasan.o \
> > - sdhci-pci-dwc-mshc.o
> > + sdhci-pci-dwc-mshc.o sdhci-pci-gli.o
> > obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-data.o
> > obj-$(CONFIG_MMC_SDHCI_ACPI) += sdhci-acpi.o
> > obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o
> > diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
> > index 4154ee11b47d..e5835fbf73bc 100644
> > --- a/drivers/mmc/host/sdhci-pci-core.c
> > +++ b/drivers/mmc/host/sdhci-pci-core.c
> > @@ -1682,6 +1682,8 @@ static const struct pci_device_id pci_ids[] = {
> > SDHCI_PCI_DEVICE(O2, SEABIRD1, o2),
> > SDHCI_PCI_DEVICE(ARASAN, PHY_EMMC, arasan),
> > SDHCI_PCI_DEVICE(SYNOPSYS, DWC_MSHC, snps),
> > + SDHCI_PCI_DEVICE(GLI, 9750, gl9750),
> > + SDHCI_PCI_DEVICE(GLI, 9755, gl9755),
> > SDHCI_PCI_DEVICE_CLASS(AMD, SYSTEM_SDHCI, PCI_CLASS_MASK, amd),
> > /* Generic SD host controller */
> > {PCI_DEVICE_CLASS(SYSTEM_SDHCI, PCI_CLASS_MASK)},
> > diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> > new file mode 100644
> > index 000000000000..99abb7830e62
> > --- /dev/null
> > +++ b/drivers/mmc/host/sdhci-pci-gli.c
> > @@ -0,0 +1,381 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright (C) 2019 Genesys Logic, Inc.
> > + *
> > + * Authors: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> > + *
> > + * Version: v0.9.0 (2019-08-08)
> > + */
> > +
> > +#include <linux/pci.h>
> > +#include <linux/mmc/mmc.h>
> > +#include <linux/delay.h>
> > +#include "sdhci.h"
> > +#include "sdhci-pci.h"
> > +
> > +/* Genesys Logic extra registers */
> > +#define SDHCI_GLI_9750_WT 0x800
> > +#define SDHCI_GLI_9750_DRIVING 0x860
> > +#define SDHCI_GLI_9750_PLL 0x864
> > +#define SDHCI_GLI_9750_SW_CTRL 0x874
> > +#define SDHCI_GLI_9750_MISC 0x878
> > +
> > +#define SDHCI_GLI_9750_TUNING_CONTROL 0x540
> > +#define SDHCI_GLI_9750_TUNING_PARAMETERS 0x544
> > +
> > +#define GLI_MAX_TUNING_LOOP 40
> > +
> > +/* Genesys Logic chipset */
> > +static void gli_set_9750(struct sdhci_host *host)
> > +{
> > + u32 wt_value = 0;
> > + u32 driving_value = 0;
> > + u32 pll_value = 0;
> > + u32 sw_ctrl_value = 0;
> > + u32 misc_value = 0;
> > + u32 parameter_value = 0;
> > + u32 control_value = 0;
> > +
> > + u16 ctrl2 = 0;
> > +
> > + wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
> > + if ((wt_value & 0x1) == 0) {
> > + wt_value |= 0x1;
> > + sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
> > + }
> > +
> > + driving_value = sdhci_readl(host, SDHCI_GLI_9750_DRIVING);
> > + pll_value = sdhci_readl(host, SDHCI_GLI_9750_PLL);
> > + sw_ctrl_value = sdhci_readl(host, SDHCI_GLI_9750_SW_CTRL);
> > + misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
> > + parameter_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_PARAMETERS);
> > + control_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_CONTROL);
> > +
> > + driving_value &= ~(0x0C000FFF);
> > + driving_value |= 0x0C000FFF;
> > + sdhci_writel(host, driving_value, SDHCI_GLI_9750_DRIVING);
> > +
> > + sw_ctrl_value |= 0xc0;
> > + sdhci_writel(host, sw_ctrl_value, SDHCI_GLI_9750_SW_CTRL);
> > +
> > + // reset the tuning flow after reinit and before starting tuning
>
> For consistent style, please use C-style comments /* */ rather than //
Thanks. I will use C-style comments to replace // .
>
> > + pll_value |= 0x800000; // bit23-1
>
> Please define bit fields and look at using GENMASK(), BIT(), FIELD_GET(),
> FIELD_PREP()
>
Got it. Thanks. I will define bit fields and use these pre-defined macro.
> > + pll_value &= ~(0x00700000); // bit22:20-0
> > +
> > + misc_value &= ~(0x8); // bit3-0
> > + misc_value &= ~(0x4); // bit2-0
> > +
> > + misc_value &= ~(0x70); // bit6:4-0
> > + misc_value |= 0x50; // bit6:4-5
> > +
> > + parameter_value &= ~(0x7); // bit2:0-0
> > + parameter_value |= 0x1; // bit2:0-1
> > +
> > + control_value &= ~(0x190000); // bit20:19-0, bit16-0
> > + control_value |= 0x110000; // bit20:19-b10, bit16-1
> > +
> > + sdhci_writel(host, pll_value, SDHCI_GLI_9750_PLL);
> > + sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
> > +
> > + // disable tuned clk
> > + ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> > + ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
> > + sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
> > +
> > + // 540 enable tuning parameters control
> > + control_value |= 0x10;
> > + sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
> > +
> > + // write 544 tuning parameters
> > + sdhci_writel(host, parameter_value, SDHCI_GLI_9750_TUNING_PARAMETERS);
> > +
> > + // 540 disable tuning parameters control
> > + control_value &= ~0x10;
> > + sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
> > +
> > + // clear tuned clk
> > + ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> > + ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
> > + sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
> > +
> > + udelay(1);
> > + wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
> > + wt_value &= ~0x1;
> > + sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
> > +}
> > +
> > +static void sdhci_gli_do_reset(struct sdhci_host *host, u8 mask)
> > +{
> > + host->ops->reset(host, mask);
> > +
> > + if (mask & SDHCI_RESET_ALL) {
> > + if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
> > + if (host->ops->enable_dma)
> > + host->ops->enable_dma(host);
> > + }
> > +
> > + /* Resetting the controller clears many */
> > + host->preset_enabled = false;
> > + }
> > +}
> > +
> > +static void sdhci_gli_abort_tuning(struct sdhci_host *host, u32 opcode)
>
> Pleased export sdhci_abort_tuning() instead.
>
Got it, thanks. I will export it if I need to use it.
> > +{
> > + sdhci_reset_tuning(host);
> > +
> > + sdhci_gli_do_reset(host, SDHCI_RESET_CMD);
> > + sdhci_gli_do_reset(host, SDHCI_RESET_DATA);
> > +
> > + sdhci_end_tuning(host);
> > +
> > + mmc_abort_tuning(host->mmc, opcode);
> > +}
> > +
> > +static void gli_set_9750_rx_inv(struct sdhci_host *host, bool b)
> > +{
> > + u32 wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
> > + u32 misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
> > +
> > + if ((wt_value & 0x1) == 0) {
> > + wt_value |= 0x1;
> > + sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
> > + }
> > +
> > + misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
> > + if (b) {
> > + misc_value |= 0x8;
> > + sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
> > + } else {
> > + misc_value &= ~0x8;
> > + sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
> > + }
> > +
> > + wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
> > + wt_value &= ~0x1;
> > + sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
> > +}
> > +
> > +static int __sdhci_execute_tuning_9750(struct sdhci_host *host, u32 opcode)
> > +{
> > + int i;
> > + int rx_inv = 0;
> > +
> > + for (rx_inv = 0; rx_inv < 2; rx_inv++) {
> > + if (rx_inv & 0x1)
> > + gli_set_9750_rx_inv(host, true);
> > + else
> > + gli_set_9750_rx_inv(host, false);
> > +
> > + sdhci_start_tuning(host);
> > +
> > + for (i = 0; i < GLI_MAX_TUNING_LOOP; i++) {
> > + u16 ctrl;
> > +
> > + sdhci_send_tuning(host, opcode);
> > +
> > + if (!host->tuning_done) {
> > + if (rx_inv == 1) {
> > + pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n",
> > + mmc_hostname(host->mmc));
> > + sdhci_gli_abort_tuning(host, opcode);
> > + return -ETIMEDOUT;
> > + }
> > + pr_info("%s: Tuning timeout, try next tuning\n",
> > + mmc_hostname(host->mmc));
> > + sdhci_gli_abort_tuning(host, opcode);
> > + break;
> > + }
> > +
> > + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> > + if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
> > + if (ctrl & SDHCI_CTRL_TUNED_CLK)
> > + return 0; /* Success! */
> > + break;
> > + }
> > + }
> > + }
> > +
> > + pr_info("%s: Tuning failed, falling back to fixed sampling clock\n",
> > + mmc_hostname(host->mmc));
> > + sdhci_reset_tuning(host);
> > + return -EAGAIN;
> > +}
> > +
> > +static int gl9750_execute_tuning(struct mmc_host *mmc, u32 opcode)
> > +{
> > + struct sdhci_host *host = mmc_priv(mmc);
> > + int err = 0;
> > + unsigned int tuning_count = 0;
> > + bool hs400_tuning;
> > +
> > + hs400_tuning = host->flags & SDHCI_HS400_TUNING;
> > +
> > + if (host->tuning_mode == SDHCI_TUNING_MODE_1)
> > + tuning_count = host->tuning_count;
> > +
> > + /*
> > + * The Host Controller needs tuning in case of SDR104 and DDR50
> > + * mode, and for SDR50 mode when Use Tuning for SDR50 is set in
> > + * the Capabilities register.
> > + * If the Host Controller supports the HS200 mode then the
> > + * tuning function has to be executed.
> > + */
> > + switch (host->timing) {
> > + /* HS400 tuning is done in HS200 mode */
> > + case MMC_TIMING_MMC_HS400:
> > + err = -EINVAL;
> > + goto out;
> > +
> > + case MMC_TIMING_MMC_HS200:
> > + /*
> > + * Periodic re-tuning for HS400 is not expected to be needed, so
> > + * disable it here.
> > + */
> > + if (hs400_tuning)
> > + tuning_count = 0;
> > + break;
> > +
> > + case MMC_TIMING_UHS_SDR104:
> > + case MMC_TIMING_UHS_DDR50:
> > + break;
> > + case MMC_TIMING_UHS_SDR50:
> > + if (host->flags & SDHCI_SDR50_NEEDS_TUNING)
> > + break;
> > + /* FALLTHROUGH */
> > +
> > + default:
> > + goto out;
> > + }
> > +
> > + if (host->ops->platform_execute_tuning) {
> > + err = host->ops->platform_execute_tuning(host, opcode);
> > + goto out;
> > + }
> > +
> > + host->mmc->retune_period = tuning_count;
> > +
> > + if (host->tuning_delay < 0)
> > + host->tuning_delay = opcode == MMC_SEND_TUNING_BLOCK;
> > +
> > + gli_set_9750(host);
> > + host->tuning_err = __sdhci_execute_tuning_9750(host, opcode);
> > +
> > + sdhci_end_tuning(host);
> > +out:
> > + host->flags &= ~SDHCI_HS400_TUNING;
> > +
> > + return err;
> > +}
> > +
> > +static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
> > +{
> > + struct sdhci_host *host = slot->host;
> > + struct mmc_host_ops *ops = &host->mmc_host_ops;
> > +
> > + slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
> > + sdhci_enable_v4_mode(host);
> > +
> > + ops->execute_tuning = gl9750_execute_tuning;
>
> It looks like there would be less duplicated code if you implemented
> host->ops->platform_execute_tuning instead of mmc->ops->execute_tuning
Thank you for comments.
I will study host->ops->platform_execute_tuning and use it to reduce
duplicated code.
>
> > +
> > + return 0;
> > +}
> > +
> > +static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot)
> > +{
> > + struct sdhci_host *host = slot->host;
> > +
> > + slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
> > + sdhci_enable_v4_mode(host);
> > +
> > + return 0;
> > +}
> > +
> > +static void sdhci_gli_voltage_switch(struct sdhci_host *host)
> > +{
> > + usleep_range(5000, 5500);
> > +}
> > +
> > +static void sdhci_gli_pci_hw_reset(struct sdhci_host *host)
> > +{
> > + struct sdhci_pci_slot *slot = sdhci_priv(host);
> > +
> > + if (slot->hw_reset)
> > + slot->hw_reset(host);
> > +}
> > +
> > +static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask)
> > +{
> > + ktime_t timeout;
> > +
> > + sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
> > +
> > + if (mask & SDHCI_RESET_ALL)
> > + host->clock = 0;
> > +
> > + /* Wait max 100 ms */
> > + timeout = ktime_add_ms(ktime_get(), 100);
> > +
> > + /* hw clears the bit when it's done */
> > + while (1) {
> > + bool timedout = ktime_after(ktime_get(), timeout);
> > +
> > + if (!(sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask))
> > + break;
> > + if (timedout) {
> > + pr_err("%s: Reset 0x%x never completed.\n",
> > + mmc_hostname(host->mmc), (int)mask);
> > + sdhci_dumpregs(host);
> > + return;
> > + }
> > + udelay(10);
> > + }
>
> Please call sdhci_reset() instead of duplicating the code above.
>
Thanks, I will modify it.
> > + gli_set_9750(host);
> > +}
> > +
> > +static u32 sdhci_gl9750_readl(struct sdhci_host *host, int reg)
> > +{
> > + u32 value;
> > +
> > + value = readl(host->ioaddr + reg);
> > + if (unlikely(reg == SDHCI_MAX_CURRENT)) {
> > + if (!(value & 0xff))
> > + value |= 0xc8;
> > + }
> > + return value;
> > +}
> > +
> > +static const struct sdhci_ops sdhci_gl9755_ops = {
> > + .set_clock = sdhci_set_clock,
> > + .enable_dma = sdhci_pci_enable_dma,
> > + .set_bus_width = sdhci_set_bus_width,
> > + .reset = sdhci_reset,
> > + .set_uhs_signaling = sdhci_set_uhs_signaling,
> > + .hw_reset = sdhci_gli_pci_hw_reset,
>
> You never set slot->hw_reset so it doesn't look like .hw_reset is needed
I will removed it if testing is ok after removing .hw_reset.
>
> > + .voltage_switch = sdhci_gli_voltage_switch,
> > +};
> > +
> > +const struct sdhci_pci_fixes sdhci_gl9755 = {
> > + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
> > + .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
> > + .probe_slot = gli_probe_slot_gl9755,
> > + .ops = &sdhci_gl9755_ops,
> > +};
> > +
> > +static const struct sdhci_ops sdhci_gl9750_ops = {
> > + .read_l = sdhci_gl9750_readl,
>
> You need CONFIG_MMC_SDHCI_IO_ACCESSORS for read_l i.e.
I will add the condition define CONFIG_MMC_SDHCI_IO_ACCESSORS to the code.
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 14d89a108edd..c3bd967d8a1a 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -94,6 +94,7 @@ config MMC_SDHCI_PCI
> depends on MMC_SDHCI && PCI
> select MMC_CQHCI
> select IOSF_MBI if X86
> + select MMC_SDHCI_IO_ACCESSORS
> help
> This selects the PCI Secure Digital Host Controller Interface.
> Most controllers found today are PCI devices.
>
> > + .set_clock = sdhci_set_clock,
> > + .enable_dma = sdhci_pci_enable_dma,
> > + .set_bus_width = sdhci_set_bus_width,
> > + .reset = sdhci_gl9750_reset,
> > + .set_uhs_signaling = sdhci_set_uhs_signaling,
> > + .hw_reset = sdhci_gli_pci_hw_reset,
> > + .voltage_switch = sdhci_gli_voltage_switch,
> > +};
> > +
> > +const struct sdhci_pci_fixes sdhci_gl9750 = {
> > + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
> > + .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
> > + .probe_slot = gli_probe_slot_gl9750,
> > + .ops = &sdhci_gl9750_ops,
> > +};
> > +
> > diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
> > index e5dc6e44c7a4..738ba5afcc20 100644
> > --- a/drivers/mmc/host/sdhci-pci.h
> > +++ b/drivers/mmc/host/sdhci-pci.h
> > @@ -65,6 +65,9 @@
> >
> > #define PCI_DEVICE_ID_SYNOPSYS_DWC_MSHC 0xc202
> >
> > +#define PCI_DEVICE_ID_GLI_9755 0x9755
> > +#define PCI_DEVICE_ID_GLI_9750 0x9750
> > +
> > /*
> > * PCI device class and mask
> > */
> > @@ -185,5 +188,7 @@ int sdhci_pci_enable_dma(struct sdhci_host *host);
> > extern const struct sdhci_pci_fixes sdhci_arasan;
> > extern const struct sdhci_pci_fixes sdhci_snps;
> > extern const struct sdhci_pci_fixes sdhci_o2;
> > +extern const struct sdhci_pci_fixes sdhci_gl9750;
> > +extern const struct sdhci_pci_fixes sdhci_gl9755;
> >
> > #endif /* __SDHCI_PCI_H */
> >
>
Thank you for reviewing.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-08-22 2:26 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-20 2:07 [PATCH V5 4/4] mmc: host: sdhci-pci: Add Genesys Logic GL975x support Ben Chuang
2019-08-21 12:29 ` Adrian Hunter
2019-08-22 2:26 ` Ben Chuang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).