From: Dan Murphy <email@example.com> To: Wolfgang Grandegger <firstname.lastname@example.org>, <email@example.com>, <firstname.lastname@example.org> Cc: <email@example.com>, <firstname.lastname@example.org>, <email@example.com> Subject: Re: [PATCH v4 1/4] can: m_can: Create a m_can platform framework Date: Fri, 18 Jan 2019 06:55:28 -0600 [thread overview] Message-ID: <firstname.lastname@example.org> (raw) In-Reply-To: <email@example.com> Wolfgang On 1/18/19 12:56 AM, Wolfgang Grandegger wrote: > Hello Dan, > > Am 17.01.19 um 21:08 schrieb Dan Murphy: >> Wolfgang >> >> On 1/17/19 2:05 PM, Dan Murphy wrote: >>> Create a m_can platform framework that peripherial >>> devices can register to and use common code and register sets. >>> The peripherial devices may provide read/write and configuration >>> support of the IP. >>> >>> Signed-off-by: Dan Murphy <firstname.lastname@example.org> >>> --- >>> drivers/net/can/m_can/m_can.c | 6 + >>> drivers/net/can/m_can/m_can_platform.c | 209 +++++++++++++++++++++++++ >>> drivers/net/can/m_can/m_can_platform.h | 163 +++++++++++++++++++ >>> 3 files changed, 378 insertions(+) >>> create mode 100644 drivers/net/can/m_can/m_can_platform.c >>> create mode 100644 drivers/net/can/m_can/m_can_platform.h >>> > > ... snip ... > >> This patch set is working for the TCAN and at least boots on io-mapped devices. >> We have a couple of customers who are looking at using this implementation and we would like to >> start moving this patch set along in the review. >> >> I did not put a change log in here as there have been no comments for the last 3 patch sets I sent. >> >> This v4 squashes a few bugs I found during testing across all the files. > > OK, after a very busy week I will try to find time for the review... > finally. > Thanks. I anticipate a v5 as we debug the io mapped code and continue to test the TCAN code. Dan > Thanks, > > Wolfgang. > -- ------------------ Dan Murphy
next prev parent reply other threads:[~2019-01-18 12:55 UTC|newest] Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-01-17 20:05 Dan Murphy 2019-01-17 20:05 ` [PATCH v4 2/4] can: m_can: Migrate the m_can code to use the framework Dan Murphy 2019-01-22 9:35 ` Wolfgang Grandegger 2019-01-22 13:37 ` Dan Murphy 2019-01-22 14:34 ` Wolfgang Grandegger 2019-01-17 20:06 ` [PATCH v4 3/4] dt-bindings: can: tcan4x5x: Add DT bindings for TCAN4x5X driver Dan Murphy 2019-01-17 20:06 ` [PATCH v4 4/4] can: tcan4x5x: Add tcan4x5x driver to the kernel Dan Murphy 2019-01-22 10:03 ` Wolfgang Grandegger 2019-01-29 19:27 ` Dan Murphy 2019-01-17 20:08 ` [PATCH v4 1/4] can: m_can: Create a m_can platform framework Dan Murphy 2019-01-18 6:56 ` Wolfgang Grandegger 2019-01-18 12:55 ` Dan Murphy [this message] 2019-01-22 8:16 ` Wolfgang Grandegger 2019-01-22 13:04 ` Dan Murphy 2019-01-22 14:46 ` Wolfgang Grandegger
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --subject='Re: [PATCH v4 1/4] can: m_can: Create a m_can platform framework' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).