linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lu Baolu <baolu.lu@linux.intel.com>
To: Vlad Buslov <vladbu@mellanox.com>
Cc: baolu.lu@linux.intel.com, Joerg Roedel <jroedel@suse.de>,
	Maor Gottlieb <maorg@mellanox.com>,
	Ran Rozenstein <ranro@mellanox.com>,
	"iommu@lists.linux-foundation.org"
	<iommu@lists.linux-foundation.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: Failure to recreate virtual functions
Date: Tue, 30 Jul 2019 12:28:34 +0800	[thread overview]
Message-ID: <838a00c4-d5bd-08db-e39c-5f00686858b5@linux.intel.com> (raw)
In-Reply-To: <vbfzhkx9n32.fsf@mellanox.com>

Hi,

On 7/29/19 6:05 PM, Vlad Buslov wrote:
> On Sat 27 Jul 2019 at 05:15, Lu Baolu<baolu.lu@linux.intel.com>  wrote:
>> Hi Vilad,
>>
>> On 7/27/19 12:30 AM, Vlad Buslov wrote:
>>> Hi Lu Baolu,
>>>
>>> Our mlx5 driver fails to recreate VFs when cmdline includes
>>> "intel_iommu=on iommu=pt" after recent merge of patch set "iommu/vt-d:
>>> Delegate DMA domain to generic iommu". I've bisected the failure to
>>> patch b7297783c2bb ("iommu/vt-d: Remove duplicated code for device
>>> hotplug"). Here is the dmesg log for following case: enable switchdev
>>> mode, set number of VFs to 0, then set it back to any value
>>>> 0.
>>> [  223.525282] mlx5_core 0000:81:00.0: E-Switch: E-Switch enable SRIOV: nvfs(2) mode (1)
>>> [  223.562027] mlx5_core 0000:81:00.0: E-Switch: SRIOV enabled: active vports(3)
>>> [  223.663766] pci 0000:81:00.2: [15b3:101a] type 00 class 0x020000
>>> [  223.663864] pci 0000:81:00.2: enabling Extended Tags
>>> [  223.665143] pci 0000:81:00.2: Adding to iommu group 52
>>> [  223.665215] pci 0000:81:00.2: Using iommu direct mapping
>>> [  223.665771] mlx5_core 0000:81:00.2: enabling device (0000 -> 0002)
>>> [  223.665890] mlx5_core 0000:81:00.2: firmware version: 16.26.148
>>> [  223.889908] mlx5_core 0000:81:00.2: Rate limit: 127 rates are supported, range: 0Mbps to 97656Mbps
>>> [  223.896438] mlx5_core 0000:81:00.2: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>>> [  223.896636] mlx5_core 0000:81:00.2: Assigned random MAC address 56:1f:95:e0:51:d6
>>> [  224.012905] mlx5_core 0000:81:00.2 ens1f0v0: renamed from eth0
>>> [  224.041651] pci 0000:81:00.3: [15b3:101a] type 00 class 0x020000
>>> [  224.041711] pci 0000:81:00.3: enabling Extended Tags
>>> [  224.043660] pci 0000:81:00.3: Adding to iommu group 53
>>> [  224.043738] pci 0000:81:00.3: Using iommu direct mapping
>>> [  224.044196] mlx5_core 0000:81:00.3: enabling device (0000 -> 0002)
>>> [  224.044298] mlx5_core 0000:81:00.3: firmware version: 16.26.148
>>> [  224.268099] mlx5_core 0000:81:00.3: Rate limit: 127 rates are supported, range: 0Mbps to 97656Mbps
>>> [  224.274983] mlx5_core 0000:81:00.3: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>>> [  224.275195] mlx5_core 0000:81:00.3: Assigned random MAC address a6:1e:56:0a:d9:f2
>>> [  224.388359] mlx5_core 0000:81:00.3 ens1f0v1: renamed from eth0
>>> [  236.325027] mlx5_core 0000:81:00.0: E-Switch: disable SRIOV: active vports(3) mode(1)
>>> [  236.362766] mlx5_core 0000:81:00.0: E-Switch: E-Switch enable SRIOV: nvfs(2) mode (2)
>>> [  237.290066] mlx5_core 0000:81:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>>> [  237.350215] mlx5_core 0000:81:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>>> [  237.373052] mlx5_core 0000:81:00.0 ens1f0: renamed from eth0
>>> [  237.390768] mlx5_core 0000:81:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>>> [  237.447846] ens1f0_0: renamed from eth0
>>> [  237.460399] mlx5_core 0000:81:00.0: E-Switch: SRIOV enabled: active vports(3)
>>> [  237.526880] ens1f0_1: renamed from eth1
>>> [  248.953873] pci 0000:81:00.2: Removing from iommu group 52
>>> [  248.954114] pci 0000:81:00.3: Removing from iommu group 53
>>> [  249.960570] mlx5_core 0000:81:00.0: E-Switch: disable SRIOV: active vports(3) mode(2)
>>> [  250.319135] mlx5_core 0000:81:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>>> [  250.559431] mlx5_core 0000:81:00.0 ens1f0: renamed from eth0
>>> [  258.819162] mlx5_core 0000:81:00.0: E-Switch: E-Switch enable SRIOV: nvfs(2) mode (1)
>>> [  258.831625] mlx5_core 0000:81:00.0: E-Switch: SRIOV enabled: active vports(3)
>>> [  258.936160] pci 0000:81:00.2: [15b3:101a] type 00 class 0x020000
>>> [  258.936258] pci 0000:81:00.2: enabling Extended Tags
>>> [  258.937438] pci 0000:81:00.2: Failed to add to iommu group 52: -16
>> It seems that an EBUSY error returned from iommu_group_add_device(). Can
>> you please hack some debug messages in iommu_group_add_device() so that
>> we can know where the EBUSY returns?
>>
>> Best regards,
>> Baolu
> The error code is returned by __iommu_attach_device().
> 

Thanks!

It looks like the system has already a domain for specific pci bdf
device. Does this VF share the bdf with other devices? Or has been
previously created, and system failed to get chance to remove it?

Best regards,
Baolu

  reply	other threads:[~2019-07-30  4:29 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-26 16:30 Failure to recreate virtual functions Vlad Buslov
2019-07-27  2:15 ` Lu Baolu
2019-07-29 10:05   ` Vlad Buslov
2019-07-30  4:28     ` Lu Baolu [this message]
2019-07-30 11:22       ` Robin Murphy
2019-07-31  7:29         ` Lu Baolu
2019-07-31 11:19           ` Vlad Buslov
2019-08-01  1:49             ` Lu Baolu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=838a00c4-d5bd-08db-e39c-5f00686858b5@linux.intel.com \
    --to=baolu.lu@linux.intel.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jroedel@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maorg@mellanox.com \
    --cc=ranro@mellanox.com \
    --cc=vladbu@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).