* [PATCH] arm64: dts: ti: k3-am64-mcu: explicitly assign UART base clock rates
@ 2022-04-11 12:11 Matthias Schiffer
2022-04-15 7:40 ` Vignesh Raghavendra
0 siblings, 1 reply; 2+ messages in thread
From: Matthias Schiffer @ 2022-04-11 12:11 UTC (permalink / raw)
To: Nishanth Menon, Vignesh Raghavendra, Tero Kristo
Cc: Rob Herring, Krzysztof Kozlowski, linux-arm-kernel, devicetree,
linux-kernel, Matthias Schiffer
We found that (at least some versions of) the sci-fw do not assign the
expected base clock rate of 48 MHz for the UARTs in the MCU domain,
leading to incorrect baud rates when used from Linux. Use
assigned-clock-rates to fix this issue.
Fixes: 8abae9389bdb ("arm64: dts: ti: Add support for AM642 SoC")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
---
I'm not sure if this is the best fix. Should the clock-frequency
property simply be removed, so the frequency is queried from the clock
driver instead?
arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
index 2bb5c9ff172c..69b0f127eea5 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
@@ -15,6 +15,8 @@ mcu_uart0: serial@4a00000 {
power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 149 0>;
clock-names = "fclk";
+ assigned-clocks = <&k3_clks 149 0>;
+ assigned-clock-rates = <48000000>;
};
mcu_uart1: serial@4a10000 {
@@ -26,6 +28,8 @@ mcu_uart1: serial@4a10000 {
power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 160 0>;
clock-names = "fclk";
+ assigned-clocks = <&k3_clks 160 0>;
+ assigned-clock-rates = <48000000>;
};
mcu_i2c0: i2c@4900000 {
--
2.25.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] arm64: dts: ti: k3-am64-mcu: explicitly assign UART base clock rates
2022-04-11 12:11 [PATCH] arm64: dts: ti: k3-am64-mcu: explicitly assign UART base clock rates Matthias Schiffer
@ 2022-04-15 7:40 ` Vignesh Raghavendra
0 siblings, 0 replies; 2+ messages in thread
From: Vignesh Raghavendra @ 2022-04-15 7:40 UTC (permalink / raw)
To: Matthias Schiffer, Nishanth Menon, Tero Kristo
Cc: Rob Herring, Krzysztof Kozlowski, linux-arm-kernel, devicetree,
linux-kernel
On 11/04/22 5:41 pm, Matthias Schiffer wrote:
> We found that (at least some versions of) the sci-fw do not assign the
> expected base clock rate of 48 MHz for the UARTs in the MCU domain,
> leading to incorrect baud rates when used from Linux. Use
> assigned-clock-rates to fix this issue.
>
> Fixes: 8abae9389bdb ("arm64: dts: ti: Add support for AM642 SoC")
> Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
> ---
>
> I'm not sure if this is the best fix. Should the clock-frequency
> property simply be removed, so the frequency is queried from the clock
> driver instead?
>
I think its better to drop clock-frequency. Driver can setup DLL/DLH to
get appropriate baudrate as per frequency queried from clock driver
> arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
> index 2bb5c9ff172c..69b0f127eea5 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
> @@ -15,6 +15,8 @@ mcu_uart0: serial@4a00000 {
> power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
> clocks = <&k3_clks 149 0>;
> clock-names = "fclk";
> + assigned-clocks = <&k3_clks 149 0>;
> + assigned-clock-rates = <48000000>;
> };
>
> mcu_uart1: serial@4a10000 {
> @@ -26,6 +28,8 @@ mcu_uart1: serial@4a10000 {
> power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>;
> clocks = <&k3_clks 160 0>;
> clock-names = "fclk";
> + assigned-clocks = <&k3_clks 160 0>;
> + assigned-clock-rates = <48000000>;
> };
>
> mcu_i2c0: i2c@4900000 {
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-04-15 7:41 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-04-11 12:11 [PATCH] arm64: dts: ti: k3-am64-mcu: explicitly assign UART base clock rates Matthias Schiffer
2022-04-15 7:40 ` Vignesh Raghavendra
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).