From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Michael Ellerman <mpe@ellerman.id.au>,
npiggin@gmail.com
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v3 14/41] powerpc/32: Tag DAR in EXCEPTION_PROLOG_2 for the 8xx
Date: Fri, 12 Mar 2021 12:50:23 +0000 (UTC) [thread overview]
Message-ID: <853a2e28ca7c5fc85617037030f99fe6070c9536.1615552867.git.christophe.leroy@csgroup.eu> (raw)
In-Reply-To: <cover.1615552866.git.christophe.leroy@csgroup.eu>
8xx requires to tag the DAR with a magic value in order to
fixup DAR on faults generated by 'dcbX', as the 8xx
forgets to update the DAR for those faults.
Do the tagging as early as possible, that is before enabling MMU.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/powerpc/kernel/head_32.h | 6 ++++++
arch/powerpc/kernel/head_8xx.S | 18 ++++++------------
2 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/powerpc/kernel/head_32.h b/arch/powerpc/kernel/head_32.h
index 1b707755c68e..910f86642eec 100644
--- a/arch/powerpc/kernel/head_32.h
+++ b/arch/powerpc/kernel/head_32.h
@@ -57,6 +57,12 @@
.endm
.macro EXCEPTION_PROLOG_2 handle_dar_dsisr=0
+#ifdef CONFIG_PPC_8xx
+ .if \handle_dar_dsisr
+ li r11, RPN_PATTERN
+ mtspr SPRN_DAR, r11 /* Tag DAR, to be used in DTLB Error */
+ .endif
+#endif
LOAD_REG_IMMEDIATE(r11, MSR_KERNEL & ~(MSR_IR | MSR_RI)) /* can take DTLB miss */
mtmsr r11
isync
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 792e2fd86479..cdbfa9d41353 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -30,6 +30,12 @@
#include <asm/export.h>
#include <asm/code-patching-asm.h>
+/*
+ * Value for the bits that have fixed value in RPN entries.
+ * Also used for tagging DAR for DTLBerror.
+ */
+#define RPN_PATTERN 0x00f0
+
#include "head_32.h"
.macro compare_to_kernel_boundary scratch, addr
@@ -42,12 +48,6 @@
#endif
.endm
-/*
- * Value for the bits that have fixed value in RPN entries.
- * Also used for tagging DAR for DTLBerror.
- */
-#define RPN_PATTERN 0x00f0
-
#define PAGE_SHIFT_512K 19
#define PAGE_SHIFT_8M 23
@@ -124,8 +124,6 @@ instruction_counter:
. = 0x200
MachineCheck:
EXCEPTION_PROLOG handle_dar_dsisr=1
- li r6, RPN_PATTERN
- mtspr SPRN_DAR, r6 /* Tag DAR, to be used in DTLB Error */
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_STD(0x200, machine_check_exception)
@@ -136,8 +134,6 @@ MachineCheck:
. = 0x600
Alignment:
EXCEPTION_PROLOG handle_dar_dsisr=1
- li r6, RPN_PATTERN
- mtspr SPRN_DAR, r6 /* Tag DAR, to be used in DTLB Error */
addi r3,r1,STACK_FRAME_OVERHEAD
b .Lalignment_exception_ool
@@ -331,8 +327,6 @@ DataTLBError:
cmpwi cr1, r11, RPN_PATTERN
beq- cr1, FixupDAR /* must be a buggy dcbX, icbi insn. */
DARFixed:/* Return from dcbx instruction bug workaround */
- li r11, RPN_PATTERN
- mtspr SPRN_DAR, r11 /* Tag DAR, to be used in DTLB Error */
EXCEPTION_PROLOG_1
EXCEPTION_PROLOG_2 handle_dar_dsisr=1
lwz r4, _DAR(r11)
--
2.25.0
next prev parent reply other threads:[~2021-03-12 12:51 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-12 12:50 [PATCH v3 00/41] powerpc/32: Switch to interrupt entry/exit in C Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 01/41] powerpc/traps: Declare unrecoverable_exception() as __noreturn Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 02/41] powerpc/40x: Don't use SPRN_SPRG_SCRATCH0/1 in TLB miss handlers Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 03/41] powerpc/40x: Change CRITICAL_EXCEPTION_PROLOG macro to a gas macro Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 04/41] powerpc/40x: Save SRR0/SRR1 and r10/r11 earlier in critical exception Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 05/41] powerpc/40x: Reorder a few instructions in critical exception prolog Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 06/41] powerpc/40x: Prepare for enabling MMU " Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 07/41] powerpc/40x: Prepare normal exception handler for enabling MMU early Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 08/41] powerpc/32: Reconcile interrupts in C Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 09/41] powerpc/32: Entry cpu time accounting " Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 10/41] powerpc/32: Handle bookE debugging in C in exception entry Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 11/41] powerpc/32: Use fast instruction to set MSR RI in exception prolog on 8xx Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 12/41] powerpc/32: Remove ksp_limit Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 13/41] powerpc/32: Always enable data translation in exception prolog Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy [this message]
2021-03-12 12:50 ` [PATCH v3 15/41] powerpc/32: Enable instruction translation at the same time as data translation Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 16/41] powerpc/32: Statically initialise first emergency context Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 17/41] powerpc/32: Add vmap_stack_overflow label inside the macro Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 18/41] powerpc/32: Use START_EXCEPTION() as much as possible Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 19/41] powerpc/32: Move exception prolog code into .text once MMU is back on Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 20/41] powerpc/32: Provide a name to exception prolog continuation in virtual mode Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 21/41] powerpc/32: Refactor booke critical registers saving Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 22/41] powerpc/32: Perform normal function call in exception entry Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 23/41] powerpc/32: Always save non volatile registers on " Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 24/41] powerpc/32: Replace ASM exception exit by C exception exit from ppc64 Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 25/41] powerpc/32: Don't save thread.regs on interrupt entry Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 26/41] powerpc/32: Set regs parameter in r3 in transfer_to_handler Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 27/41] powerpc/32: Call bad_page_fault() from do_page_fault() Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 28/41] powerpc/32: Save trap number on stack in exception prolog Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 29/41] powerpc/32: Add a prepare_transfer_to_handler macro for exception prologs Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 30/41] powerpc/32: Only restore non volatile registers when required Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 31/41] powerpc/32: Dismantle EXC_XFER_STD/LITE/TEMPLATE Christophe Leroy
2021-07-31 10:12 ` Finn Thain
2021-07-31 15:39 ` Christophe Leroy
2021-08-01 1:21 ` Finn Thain
[not found] ` <34e52975-4ab9-4eb4-3501-02376e38a27c@yahoo.com>
2021-08-01 23:48 ` Finn Thain
2021-08-02 15:19 ` LEROY Christophe
2021-08-03 0:43 ` Finn Thain
[not found] ` <62d36dbb-4b39-f5bd-7962-4dcfbea729b3@linux-m68k.org>
[not found] ` <683c8156-97b0-5ba7-ce31-2e8613089836@yahoo.com>
2021-08-04 4:57 ` Finn Thain
2021-07-31 16:40 ` Christophe Leroy
2021-08-01 1:39 ` Finn Thain
2021-03-12 12:50 ` [PATCH v3 32/41] powerpc/32: Remove the xfer parameter in EXCEPTION() macro Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 33/41] powerpc/32: Refactor saving of volatile registers in exception prologs Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 34/41] powerpc/32: Save remaining registers in exception prolog Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 35/41] powerpc/32: Return directly from power_save_ppc32_restore() Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 36/41] powerpc/32: Only use prepare_transfer_to_handler function on book3s/32 and e500 Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 37/41] powerpc/32s: Move KUEP locking/unlocking in C Christophe Leroy
2021-03-27 17:24 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 38/41] powerpc/64s: Make kuap_check_amr() and kuap_get_and_check_amr() generic Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 39/41] powerpc/32s: Create C version of kuap save/restore/check helpers Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 40/41] powerpc/8xx: " Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 41/41] powerpc/32: Manage KUAP in C Christophe Leroy
2021-03-31 1:09 ` [PATCH v3 00/41] powerpc/32: Switch to interrupt entry/exit " Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=853a2e28ca7c5fc85617037030f99fe6070c9536.1615552867.git.christophe.leroy@csgroup.eu \
--to=christophe.leroy@csgroup.eu \
--cc=benh@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).