From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: "David S. Miller" <davem@davemloft.net>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Cc: Jisheng Zhang <jszhang@marvell.com>,
Arnd Bergmann <arnd@arndb.de>,
Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Gregory CLEMENT <gregory.clement@free-electrons.com>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
linux-arm-kernel@lists.infradead.org,
Nadav Haklai <nadavh@marvell.com>,
Marcin Wojtas <mw@semihalf.com>,
Dmitri Epshtein <dima@marvell.com>,
Yelena Krivosheev <yelena@marvell.com>
Subject: [PATCH v3 net-next 6/6] ARM64: dts: marvell: Add network support for Armada 3700
Date: Tue, 29 Nov 2016 10:37:26 +0100 [thread overview]
Message-ID: <8655f52de50e97a5ddf45e8363deaa09fd93ff3e.1480412215.git-series.gregory.clement@free-electrons.com> (raw)
In-Reply-To: <cover.a09aeaf5ba62853d595153626b6121ef52a3e9b4.1480412215.git-series.gregory.clement@free-electrons.com>
In-Reply-To: <cover.a09aeaf5ba62853d595153626b6121ef52a3e9b4.1480412215.git-series.gregory.clement@free-electrons.com>
Add neta nodes for network support both in device tree for the SoC and
the board.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm64/boot/dts/marvell/armada-3720-db.dts | 23 +++++++++++++++++++-
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 23 +++++++++++++++++++-
2 files changed, 46 insertions(+), 0 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 1372e9a6aaa4..c8b82e4145de 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -81,3 +81,26 @@
&pcie0 {
status = "okay";
};
+
+&mdio {
+ status = "okay";
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+ð0 {
+ phy-mode = "rgmii-id";
+ phy = <&phy0>;
+ status = "okay";
+};
+
+ð1 {
+ phy-mode = "rgmii-id";
+ phy = <&phy1>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index e9bd58793464..3b8eb45bdc76 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -140,6 +140,29 @@
};
};
+ eth0: ethernet@30000 {
+ compatible = "marvell,armada-3700-neta";
+ reg = <0x30000 0x4000>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sb_periph_clk 8>;
+ status = "disabled";
+ };
+
+ mdio: mdio@32004 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0x32004 0x4>;
+ };
+
+ eth1: ethernet@40000 {
+ compatible = "marvell,armada-3700-neta";
+ reg = <0x40000 0x4000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sb_periph_clk 7>;
+ status = "disabled";
+ };
+
usb3: usb@58000 {
compatible = "marvell,armada3700-xhci",
"generic-xhci";
--
git-series 0.8.10
next prev parent reply other threads:[~2016-11-29 9:38 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-29 9:37 [PATCH v3 net-next 0/6] Support Armada 37xx SoC (ARMv8 64-bits) in mvneta driver Gregory CLEMENT
2016-11-29 9:37 ` [PATCH v3 net-next 1/6] net: mvneta: Optimize rx path for small frame Gregory CLEMENT
2016-11-29 9:37 ` [PATCH v3 net-next 2/6] net: mvneta: Use cacheable memory to store the rx buffer virtual address Gregory CLEMENT
2016-11-29 9:50 ` Marcin Wojtas
2016-11-29 10:17 ` Gregory CLEMENT
2016-11-29 9:59 ` Marcin Wojtas
2016-11-29 10:19 ` Gregory CLEMENT
2016-11-29 10:34 ` Marcin Wojtas
2016-11-29 10:39 ` Gregory CLEMENT
2016-11-29 9:37 ` [PATCH v3 net-next 3/6] net: mvneta: Convert to be 64 bits compatible Gregory CLEMENT
2016-11-29 9:37 ` [PATCH v3 net-next 4/6] net: mvneta: Only disable mvneta_bm for 64-bits Gregory CLEMENT
2016-11-29 9:37 ` [PATCH v3 net-next 5/6] net: mvneta: Add network support for Armada 3700 SoC Gregory CLEMENT
2016-11-29 9:37 ` Gregory CLEMENT [this message]
2016-11-29 10:05 ` [PATCH v3 net-next 0/6] Support Armada 37xx SoC (ARMv8 64-bits) in mvneta driver Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8655f52de50e97a5ddf45e8363deaa09fd93ff3e.1480412215.git-series.gregory.clement@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=andrew@lunn.ch \
--cc=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=dima@marvell.com \
--cc=jason@lakedaemon.net \
--cc=jszhang@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mw@semihalf.com \
--cc=nadavh@marvell.com \
--cc=netdev@vger.kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=thomas.petazzoni@free-electrons.com \
--cc=yelena@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).