linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: James Clark <james.clark@arm.com>
Cc: coresight@lists.linaro.org, linux-arm-kernel@lists.infradead.org,
	kvmarm@lists.linux.dev, suzuki.poulose@arm.com, acme@kernel.org,
	oliver.upton@linux.dev, broonie@kernel.org,
	James Morse <james.morse@arm.com>,
	Zenghui Yu <yuzenghui@huawei.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>, Mike Leach <mike.leach@linaro.org>,
	Alexander Shishkin <alexander.shishkin@linux.intel.com>,
	Anshuman Khandual <anshuman.khandual@arm.com>,
	Miguel Luis <miguel.luis@oracle.com>,
	Joey Gouly <joey.gouly@arm.com>, Ard Biesheuvel <ardb@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Arnd Bergmann <arnd@arndb.de>,
	Kalesh Singh <kaleshsingh@google.com>,
	Vincent Donnefort <vdonnefort@google.com>,
	Ryan Roberts <ryan.roberts@arm.com>,
	Fuad Tabba <tabba@google.com>,
	Jing Zhang <jingzhangos@google.com>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 6/8] arm64: KVM: Add interface to set guest value for TRFCR register
Date: Mon, 26 Feb 2024 15:01:35 +0000	[thread overview]
Message-ID: <86cysj2rsg.wl-maz@kernel.org> (raw)
In-Reply-To: <20240226113044.228403-7-james.clark@arm.com>

On Mon, 26 Feb 2024 11:30:34 +0000,
James Clark <james.clark@arm.com> wrote:
> 
> Add an interface for the Coresight driver to use to set the value of the
> TRFCR register for the guest. This register controls the exclude

This is not *for* the guest. It is the *host* value while running the
guest.

> settings for trace at different exception levels, and is used to honor
> the exclude_host and exclude_guest parameters from the Perf session.
> This will be used to later write TRFCR_EL1 on nVHE at guest switch. For
> VHE, the host trace is controlled by TRFCR_EL2 and thus we can write to
> the TRFCR_EL1 immediately. Because guest writes to the register are
> trapped, the value will persist and can't be modified.

See?

> 
> Instead of adding a load of infrastructure to share the host's per-cpu
> offsets with the hypervisor, just define the new storage as a NR_CPUS
> array.
> 
> Signed-off-by: James Clark <james.clark@arm.com>
> ---
>  arch/arm64/include/asm/kvm_host.h |  3 +++
>  arch/arm64/kernel/image-vars.h    |  1 +
>  arch/arm64/kvm/debug.c            | 29 +++++++++++++++++++++++++++++
>  3 files changed, 33 insertions(+)
> 
> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> index 85b5477bd1b4..56b7f7eca195 100644
> --- a/arch/arm64/include/asm/kvm_host.h
> +++ b/arch/arm64/include/asm/kvm_host.h
> @@ -509,6 +509,7 @@ struct kvm_host_psci_config {
>  	bool psci_0_1_cpu_off_implemented;
>  	bool psci_0_1_migrate_implemented;
>  };
> +extern u64 ____cacheline_aligned kvm_guest_trfcr[NR_CPUS];

Great. So you are making it a guarantee that this is going to
ping-pong on every CPU that accesses this stuff. I'm sure my nVHE 64
core system is going to enjoy it. Not.

Look, we already have some per-CPU context: it's called kvm_host_data,
and we link to it from each and every vcpu. So as long as you're in
the context of a vcpu, you have access to it. Simples. We even have
accessors that pick the correct instance between VHE and (n/h)VHE.

What is wrong with using that?

>  
>  extern struct kvm_host_psci_config kvm_nvhe_sym(kvm_host_psci_config);
>  #define kvm_host_psci_config CHOOSE_NVHE_SYM(kvm_host_psci_config)
> @@ -1174,6 +1175,7 @@ void kvm_arch_vcpu_put_debug_state_flags(struct kvm_vcpu *vcpu);
>  void kvm_set_pmu_events(u32 set, struct perf_event_attr *attr);
>  void kvm_clr_pmu_events(u32 clr);
>  bool kvm_set_pmuserenr(u64 val);
> +void kvm_etm_set_guest_trfcr(u64 trfcr_guest);
>  #else
>  static inline void kvm_set_pmu_events(u32 set, struct perf_event_attr *attr) {}
>  static inline void kvm_clr_pmu_events(u32 clr) {}
> @@ -1181,6 +1183,7 @@ static inline bool kvm_set_pmuserenr(u64 val)
>  {
>  	return false;
>  }
> +static inline void kvm_etm_set_guest_trfcr(u64 trfcr_guest) {}
>  #endif
>  
>  void kvm_vcpu_load_vhe(struct kvm_vcpu *vcpu);
> diff --git a/arch/arm64/kernel/image-vars.h b/arch/arm64/kernel/image-vars.h
> index 31daa1da191c..fe9e2bd7f43a 100644
> --- a/arch/arm64/kernel/image-vars.h
> +++ b/arch/arm64/kernel/image-vars.h
> @@ -59,6 +59,7 @@ KVM_NVHE_ALIAS(alt_cb_patch_nops);
>  
>  /* Global kernel state accessed by nVHE hyp code. */
>  KVM_NVHE_ALIAS(kvm_vgic_global_state);
> +KVM_NVHE_ALIAS(kvm_guest_trfcr);
>  
>  /* Kernel symbols used to call panic() from nVHE hyp code (via ERET). */
>  KVM_NVHE_ALIAS(nvhe_hyp_panic_handler);
> diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c
> index 49a13e72ddd2..fe90bc7d6dd4 100644
> --- a/arch/arm64/kvm/debug.c
> +++ b/arch/arm64/kvm/debug.c
> @@ -22,6 +22,7 @@
>  				DBG_MDSCR_MDE)
>  
>  static DEFINE_PER_CPU(u64, mdcr_el2);
> +u64 ____cacheline_aligned kvm_guest_trfcr[NR_CPUS];
>  
>  /*
>   * save/restore_guest_debug_regs
> @@ -359,3 +360,31 @@ void kvm_arch_vcpu_put_debug_state_flags(struct kvm_vcpu *vcpu)
>  	vcpu_clear_flag(vcpu, DEBUG_STATE_SAVE_TRBE);
>  	vcpu_clear_flag(vcpu, DEBUG_STATE_SAVE_TRFCR);
>  }
> +
> +/*
> + * Interface for the Coresight driver to use to set the value of the TRFCR

nit: s/to use//

> + * register for the guest. This register controls the exclude settings for trace

s/for the guest/for *tracing* the guest/

> + * at different exception levels, and is used to honor the exclude_host and
> + * exclude_guest parameters from the Perf session.
> + *
> + * This will be used to later write TRFCR_EL1 on nVHE at guest switch. For VHE,
> + * the host trace is controlled by TRFCR_EL2 and thus we can write to the

s/to the/to/

> + * TRFCR_EL1 immediately. Because guest writes to the register are trapped, the
> + * value will persist and can't be modified. For pKVM, kvm_guest_trfcr can't
> + * be read by the hypervisor, so don't bother writing it.

I don't know what you mean by "can't be read". Because controlling all
of the EL1 memory is not enough?

> + */
> +void kvm_etm_set_guest_trfcr(u64 trfcr_guest)
> +{
> +	if (WARN_ON_ONCE(!cpuid_feature_extract_unsigned_field(read_sysreg(id_aa64dfr0_el1),
> +							       ID_AA64DFR0_EL1_TraceFilt_SHIFT)))
> +		return;
> +
> +	/* Warn in invalid use of smp_processor_id() */
> +	WARN_ON_ONCE(preemptible());

What does it buy us to WARN, but continue to do the *wrong* thing?

> +
> +	if (has_vhe())
> +		write_sysreg_s(trfcr_guest, SYS_TRFCR_EL12);

Please use write_sysreg_el1() instead.

> +	else if (!is_protected_kvm_enabled())
> +		kvm_guest_trfcr[smp_processor_id()] = trfcr_guest;
> +}
> +EXPORT_SYMBOL_GPL(kvm_etm_set_guest_trfcr);

Thanks,

	M.

-- 
Without deviation from the norm, progress is not possible.

  reply	other threads:[~2024-02-26 15:01 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-26 11:30 [PATCH v6 0/8] kvm/coresight: Support exclude guest and exclude host James Clark
2024-02-26 11:30 ` [PATCH v6 1/8] arm64: KVM: Fix renamed function in comment James Clark
2024-02-26 11:30 ` [PATCH v6 2/8] arm64/sysreg: Add a comment that the sysreg file should be sorted James Clark
2024-02-26 13:19   ` Mark Brown
2024-02-26 11:30 ` [PATCH v6 3/8] tools: arm64: Update sysreg.h header files James Clark
2024-02-26 11:30 ` [PATCH v6 4/8] arm64/sysreg/tools: Move TRFCR definitions to sysreg James Clark
2024-02-26 13:21   ` Mark Brown
2024-02-26 11:30 ` [PATCH v6 5/8] arm64: KVM: Add iflag for FEAT_TRF James Clark
2024-02-26 13:35   ` Marc Zyngier
2024-02-26 15:41     ` James Clark
2024-02-26 18:03       ` Marc Zyngier
2024-02-26 11:30 ` [PATCH v6 6/8] arm64: KVM: Add interface to set guest value for TRFCR register James Clark
2024-02-26 15:01   ` Marc Zyngier [this message]
2024-02-26 11:30 ` [PATCH v6 7/8] arm64: KVM: Write TRFCR value on guest switch with nVHE James Clark
2024-02-26 17:50   ` Marc Zyngier
2024-02-26 18:26   ` Marc Zyngier
2024-02-26 11:30 ` [PATCH v6 8/8] coresight: Pass guest TRFCR value to KVM James Clark

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=86cysj2rsg.wl-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=acme@kernel.org \
    --cc=alexander.shishkin@linux.intel.com \
    --cc=anshuman.khandual@arm.com \
    --cc=ardb@kernel.org \
    --cc=arnd@arndb.de \
    --cc=broonie@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=coresight@lists.linaro.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=james.clark@arm.com \
    --cc=james.morse@arm.com \
    --cc=jingzhangos@google.com \
    --cc=joey.gouly@arm.com \
    --cc=kaleshsingh@google.com \
    --cc=kvmarm@lists.linux.dev \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=miguel.luis@oracle.com \
    --cc=mike.leach@linaro.org \
    --cc=oliver.upton@linux.dev \
    --cc=ryan.roberts@arm.com \
    --cc=suzuki.poulose@arm.com \
    --cc=tabba@google.com \
    --cc=vdonnefort@google.com \
    --cc=will@kernel.org \
    --cc=yuzenghui@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).